Bitcointalk Mobile Browser presented by IRLBTC™

<< >> (p.440)

Author

Topic: ANTMINER S3+ Discussion and Support Thread (Read 710659 times)

FlensGold

Legendary

Offline

Activity: 1405
Merit: 1001

Re: ANTMINER S3+ Discussion and Support Thread 0.24$/G Free Ocean Shipping

January 09, 2015, 07:57:58 PM

#8781

I have a problem with my Antminer S3+ hoping that someone has an idea:
The miner can not be accessed, neither via WebIF nore via Ping. I bought just bought it used and did not access it yet.
I already tried to reset it, but after powering it only the (upper) red led is blinking regularly. When trying to reset it pushing the button does not change anything at all, the red light keeps blinking in the same intervall all time. Fans are not running.
What can I do? Does anyone have an idea?
Kind regards

jackbox

Legendary

Offline

Activity: 1246
Merit: 1024

Re: ANTMINER S3+ Discussion and Support Thread 0.24$/G Free Ocean Shipping

January 09, 2015, 08:00:20 PM

#8782

Quote from: FlensGold on January 09, 2015, 07:57:58 PM

That can be caused by not enough power. What psu are you using and how many watts on the 12 volt rail?

Buy a Trezor and Protect your BTC, BCH, BTG, DASH, LTC, DGB, ZEC, ETH and ETC from hackers.
If I was helpful please buy me a coffee BTC: 1DWK7vBaxcTC5Wd2nQwLGEoy8xdFVzGKLK BTG: AWvN1iBqCUqG2tEh3XoVvRbdcGrAzfBBpW
If I was helpful please buy me a burger DGB: DLASV6CUQpGtGSyaVz5FYuu5YxZ17MoGQz

FlensGold

Legendary

Offline

Activity: 1405
Merit: 1001

Re: ANTMINER S3+ Discussion and Support Thread 0.24$/G Free Ocean Shipping

January 09, 2015, 08:01:58 PM

#8783

It is a Corsair CX750M which I am also using for other S3+, it should have enough power.

jackbox

Legendary

Offline

Activity: 1246
Merit: 1024

Re: ANTMINER S3+ Discussion and Support Thread 0.24$/G Free Ocean Shipping

January 09, 2015, 08:05:46 PM

#8784

Quote from: FlensGold on January 09, 2015, 08:01:58 PM

It is a Corsair CX750M which I am also using for other S3+, it should have enough power.

That PSU should work. Maybe the seller had a failed firmware update?

Mudbankkeith

Hero Member

Offline

Activity: 868
Merit: 1000

Re: ANTMINER S3+ Discussion and Support Thread 0.24$/G Free Ocean Shipping

January 09, 2015, 08:07:39 PM

#8785

Quote from: jackbox on January 09, 2015, 08:05:46 PM

Quote from: FlensGold on January 09, 2015, 08:01:58 PM

It is a Corsair CX750M which I am also using for other S3+, it should have enough power.

That PSU should work. Maybe the seller had a failed firmware update?

swap around your psu's, to eliminate any fault there.

BTc donations welcome:- 13c2KuzWCaWFTXF171Zn1HrKhMYARPKv97

FlensGold

Legendary

Offline

Activity: 1405
Merit: 1001

Re: ANTMINER S3+ Discussion and Support Thread 0.24$/G Free Ocean Shipping

January 09, 2015, 08:10:46 PM

#8786

He said he had a firmware from december when he received it, but after having trouble with it he downgraded to a firmware from July.
WTF?!? I thought that S3+ support started in firmware from August? I am afraid this might be the problem....
Is there a chance to resurrect it?

jackbox

Legendary

Offline

Activity: 1246
Merit: 1024

Re: ANTMINER S3+ Discussion and Support Thread 0.24$/G Free Ocean Shipping

January 09, 2015, 08:14:30 PM

#8787

Quote from: FlensGold on January 09, 2015, 08:10:46 PM

I think you can fix it via the serial header on the controller board but it is not an easy task. I have never done it so I would suggest Googling for the info.

dogie

Legendary

Offline

Activity: 1666
Merit: 1185

dogiecoin.com

Re: ANTMINER S3+ Discussion and Support Thread 0.24$/G Free Ocean Shipping

January 09, 2015, 08:20:20 PM

#8788

Quote from: intobit459 on January 09, 2015, 07:29:14 PM

what is 12.16 bug fixes

Compared to 1024, fixes restart issue and some very minor stuff.

FlensGold

Legendary

Offline

Activity: 1405
Merit: 1001

Re: ANTMINER S3+ Discussion and Support Thread 0.24$/G Free Ocean Shipping

January 09, 2015, 08:22:32 PM

#8789

Quote from: jackbox on January 09, 2015, 08:14:30 PM

Quote from: FlensGold on January 09, 2015, 08:10:46 PM

I think you can fix it via the serial header on the controller board but it is not an easy task. I have never done it so I would suggest Googling for the info.

That was not the answer I was hoping for ;-)

If anyone has an idea or a kind of HowTo to do this, I would appreciate it, thanks!

pekatete

Hero Member

Offline

Activity: 518
Merit: 500

Re: ANTMINER S3+ Discussion and Support Thread 0.24$/G Free Ocean Shipping

January 09, 2015, 08:26:35 PM

#8790

Quote from: FlensGold on January 09, 2015, 08:22:32 PM

Quote from: jackbox on January 09, 2015, 08:14:30 PM

Quote from: FlensGold on January 09, 2015, 08:10:46 PM

I think you can fix it via the serial header on the controller board but it is not an easy task. I have never done it so I would suggest Googling for the info.

That was not the answer I was hoping for ;-)

If anyone has an idea or a kind of HowTo to do this, I would appreciate it, thanks!

Serial unbricking of the S3 control board

https://bt.irlbtc.com/view/889206.msg9902302#msg9902302

S3 Overclock | S3+ Voltage OC | Dell 550W PSU Connectors | Coincut.com Fast UK BTC Exchange |
BTC: 1AwgqD7A2KuQ4WT4273JXZPUf29BAbdp2

visdude

Legendary

Offline

Activity: 1081
Merit: 1001

Re: ANTMINER S3+ Discussion and Support Thread 0.24$/G Free Ocean Shipping

January 09, 2015, 08:32:23 PM

#8791

Quote from: jackbox on January 09, 2015, 05:32:55 PM

Quote from: daddyfatsax on January 09, 2015, 05:27:57 PM

Anyone who does not have the 10/24/2014 firmware, here it is. I had to go back to this firmware to get my units working correctly.

https://www.dropbox.com/s/sc6kpwj7zh0ggs2/antMiner_S320141024.bin?dl=0

MD5: c7b463def1f21e69dbef606601f10e12

The checksums don't match. This file has:

MD5: 7189a012a7a3cecb9db05090b7d0d64f

bleeding2323

Full Member

Offline

Activity: 229
Merit: 100

https://forum.positroncrypto.com/

Re: ANTMINER S3+ Discussion and Support Thread 0.24$/G Free Ocean Shipping

January 09, 2015, 09:11:53 PM

#8792

Quote from: dogie on January 09, 2015, 11:53:27 AM

Quote from: sloopy on January 09, 2015, 03:23:55 AM

Quote from: aurel57 on January 09, 2015, 02:38:11 AM

Quote from: sloopy on January 09, 2015, 01:35:14 AM

I have an S3 which showed up today I can not log in.
I do get to the screen where you enter the login and pass and I enter root root no luck. I tried root admin no luck. I powered off and pressed the hole beside the cat 5 LEDs for ten seconds, tried again with new browser window, same thing, tried with it powered on, same thing. What am I missing here please. It must be something dumb but it is driving me mad. I had another one from ebay show up doa today.

If you bought it used then prior owner may have changed the password?

Wouldn't "factory defaults" set it to a default password?

All good suggestions, although its not an easy flash if you can't login. Reset button will likely be broken due to shipping with November firmware if its new.

Usually with the unit powered on, use a toothpick, tech pick, I do not recommend a paperclip, good way to fry something.
press the reset button, till you see the lights go off, this is a good indicator that it is resetting. then scan for a new ip that shows up on your network, (if you are using a network).

https://www.coinbase.com/join/54b2c425d9e8acd675000026 ### https://hashflare.io/r/66EE1A5B ### https://cldmine.com/?ref=270525 ### https://cldmine.com/?ref=270525 ### https://secure.payza.com/?M0edZocezCswNhqO%2fySHfxTq7bVzVshR1M1tHw5YLOI%3d Earn money with Payza ### Donate I like bitcoin 17zh1oNttbfX3LKY77iZ5JHpbtSbcivLcy

dogie

Legendary

Offline

Activity: 1666
Merit: 1185

dogiecoin.com

Re: ANTMINER S3+ Discussion and Support Thread 0.24$/G Free Ocean Shipping

January 09, 2015, 09:23:43 PM

#8793

Quote from: FlensGold on January 09, 2015, 07:57:58 PM

Quote from: jackbox on January 09, 2015, 08:14:30 PM

Quote from: FlensGold on January 09, 2015, 08:10:46 PM

I think you can fix it via the serial header on the controller board but it is not an easy task. I have never done it so I would suggest Googling for the info.

Yeah, that's not going to be easy. Follow the alternative subnet instructions in my setup guide to see if you can find it. If not, its likely you'll have to return it to your seller.

vabchgent

Sr. Member

Offline

Activity: 840
Merit: 251

Re: ANTMINER S3+ Discussion and Support Thread 0.24$/G Free Ocean Shipping

January 09, 2015, 10:13:44 PM

#8794

Did you try the basics set your laptop at 192.168.1.XX(or make sure your ip on your network is 192.168.1.xx) See if you can ping it and try to log into the S3 at 192.168.1.99 after a reset and about 5 minutes they dont start really fast. Make sure you have a lan cable plugged in the lan port should flash yellow and green.

Ping the 192.168.1.99 - See if there is return

This explains ping with pictures
https://iihelp.iinet.net.au/How_to_do_a_ping_test

Finding your ip address

http://windows.about.com/od/networkconnect/a/How-To-Find-A-Computers-Ip-Address-In-Windows-7.htm

If your network is not on the 192.168.1.x then you will never reach the 192.168.1.99. Let us know I am sure if I dont answer others can. Thanks

Just a heads up you can use a S1 controller board on these with a S1 to S3 conversion kit and it will start with the S1 firmware.Just an example the firmware update would have to go really wrong to brick it.

So please check the basics first. Thanks

ITSMYNE
Talk NFTs. Trade NFTs

█████████████████

███

██████████

██████

███████████

███████████████

███████████████████

Social-plus NFT marketplace for official sports NFTs
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
J O I N T H E F I R S T L I S T
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄

dog1965

Sr. Member

Offline

Activity: 392
Merit: 250

Re: ANTMINER S3+ Discussion and Support Thread 0.24$/G Free Ocean Shipping

January 10, 2015, 02:15:11 PM

#8795

Oh no here we go again antMiner_S320150109.bin no no no no!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I cant take THESE GARBAGE FIRMWARES PLEASE BITMAIN PROGRAM IT RIGHT !!!!!!!!!!!!!

This is the worst one I have seen yet!!!!!!!!!!!!!!!!!! Embarrassed

I FELL LIKE RMA-ING ALL MY MINERS THIS IS DISTGUSTING!!!!!!!!!

They should fire all there firmware engineers !!!!!!!!!!!!!

intobit459

Newbie

Offline

Activity: 24
Merit: 0

Re: ANTMINER S3+ Discussion and Support Thread 0.24$/G Free Ocean Shipping

January 10, 2015, 02:16:49 PM

#8796

0109 out

Pautado

Newbie

Offline

Activity: 29
Merit: 0

Re: ANTMINER S3+ Discussion and Support Thread 0.24$/G Free Ocean Shipping

January 10, 2015, 02:31:42 PM

#8797

I just got an S3. Could someone kindly tell me what the best firmware is at the moment?

jackbox

Legendary

Offline

Activity: 1246
Merit: 1024

Re: ANTMINER S3+ Discussion and Support Thread 0.24$/G Free Ocean Shipping

January 10, 2015, 02:34:04 PM

#8798

Quote from: Pautado on January 10, 2015, 02:31:42 PM

I just got an S3. Could someone kindly tell me what the best firmware is at the moment?

The best is whatever is already on it if it works. No reason to flash just to flash. Oct. 25th works great but no reset button functionality.

Mudbankkeith

Hero Member

Offline

Activity: 868
Merit: 1000

Re: ANTMINER S3+ Discussion and Support Thread 0.24$/G Free Ocean Shipping

January 10, 2015, 02:37:43 PM

#8799

Quote from: Pautado on January 10, 2015, 02:31:42 PM

I just got an S3. Could someone kindly tell me what the best firmware is at the moment?

If it works ok, then leave it alone and it will be fine.

BTc donations welcome:- 13c2KuzWCaWFTXF171Zn1HrKhMYARPKv97

Pautado

Newbie

Offline

Activity: 29
Merit: 0

Re: ANTMINER S3+ Discussion and Support Thread 0.24$/G Free Ocean Shipping

January 10, 2015, 02:42:56 PM

#8800

Got it. Thanks for your answers Wink

Pages: « 1 ... 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 [440] 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 ... 515 »

Page 439

Viewing Page: 440