think its posted a few pages back maybe it could be added to ann or something.

If someone wants so build a staking device with a Raspberry Pi, here's a little step-by-step tutorial:

1) Install Raspbian system with NOOBS : http://www.raspberrypi.org/help/noobs-setup/

2) Boot the system and login: Default Login is:  USER: pi ; Password: raspberry

3) On first boot you will be promted to a configuration, where you can change the PI's name on the network and the password for the Pi user.

4) If you use remote desktop,you don't need to connect nothing to the Pi, exept LAN-Cable and power supply. If you don't want a remote desktop, type "startx" to the console and wait for the GUI to load. And proceed wird step 7.

5) Type "sudo apt-get install xrdp" and enter to install the remote desktop client an restart.

6) Now open the "Remote desktop connection" in Windows (It's a integrated system tool) and login with the pi's network alias, User:pi and your password.

7) Now you should see the GUI. Open a terminal and type "sudo apt-get update" and then "sudo apt-get upgrade". This should take some time

8 ) Now type  "sudo apt-get install qt4-dev-tools libboost-dev libboost-thread-dev libboost-program-options-dev libboost-filesystem-dev libboost-system-dev libdb++-dev libminiupnpc-dev libssl-dev" and enter



10) Type "sudo git clone https://github.com/presstab/HyperStake

11) now "sudo cd Hyperstake"

12) now "sudo qmake"
13) open the Makefile with your text editor and remove -msse2 from the Makefile 2 times.
14) and "sudo make" , this step take very long (1-2 hours)

Use the BOOTSTRAP File from the Ann even with the bootstrap it will take a VERY long time to sync dont sit and w8 for it.

This works with wheezy as wel.


this is the Vrc Rpi guide i changed the required fields , if i missed some just change vrc to Hyperstake and u should be fine.

I thought I'd just share my latest experience with HYP - so that you don't make the same mistake as I just did!

Up until now, everything's gone perfect, as far as I'm concerned, with MY management of my wallet.
I'm a stickler for making sure that as soon as my blocks stake, I optimise them (merge together) to make new blocks of anywhere between 2,500 and 4,000 HYP.

Anyone who's seen my earlier postings, will also remember I used 100GBP as a "test" to see the benefits of a HyperBank - buying 15,793 HYP, placing it in a separate address, in blocks of approx 2,500 HYP each, and leaving it to stake.

Well, today I went to "optimise" my latest staked blocks, and unwittingly, I also managed to include ALL 15,793 HYP alongside my approx 3,000 HYP I was trying to merge together, into one massive 19,000 HYP block!!!

"Annoyed as hell" would be a polite way of putting it. I'd screwed up my own experiment, and this is after 8 days - so they were "this close" to starting to stake!!!!!!

So, where did I go wrong? And what can be done to stop it happening to other people?

My issue (and I take the blame all on my own) was that I'd gone into Coin Control, and earlier in the day I'd been on "Tree Mode" and I'd left ticked the experiment address with the 15,793 HYP inside.
Consequently, when I then went into List Mode, and selected 2 newly minted blocks to merge together, it added the entire lot together, resulting in the massive 19,000 HYP Block.

Yes, the figures added up right on the screen showing this - it's just that I didn't take in what I was reading - afterall, I'd merged blocks together many many times before - why would this be different, right?..... Wrong!

So, I've lost staking on all 15,793 HYP for 8 days worth. It won't kill me - it sure as hell made me mad with myself, but it got me thinking.....

Presstab - I can see no obvious reason why anyone would want to send themselves blocks of HYP, over, lets say, 5,000 HYP. Is there any way that a precaution can be implemented into the wallet which, when "accidentally" sending such a stupid amount of HYP to your "own" addresses, the wallet can Red Flag this, making you think twice about what you're doing?

On another note, in Coin Control, if you list by "Potential Stake" and have a reward of 1,000 HYP - the maximum reward, this will not show up at the top of the list - it will show in the 100's, so pretty much near the bottom (it sees 100.1 as a higher reward than 1000.0) - a small thing, but something you might easily update in the next wallet

Join ##hyperstake, lot of people willing to help here.

Could you update the Raspberry tutorial? Thank you.

Welcome to the club of "mistakers" (wordplay inside). I lost 70k that way last week (different reason) and probably 5k earlier (same reason).

We could open a Mistaker Hall of Fame. I know it happened to waxo too (50k, right?)
So, if experienced HYPsters make this mistake, you can be sure a lot of less-experienced users did or will, A warning after 5k attempt of payment to yourself looks good.
"Are you sure you want to pay XXX HYP to yourself? Maximum useful block size is below 5k. All the staking on this HYP will be reset - don't become a mistaker!"

Also, I'd like to remind you of the OTC thread. Right now, Kushed is willing to pay 3750 sat for a large bag of HP.

Please, if Alex Green says he wants some HYP, kindly refuse and report to us, We don't want to become completely the new Doge

Edit: congratulations, Sakura!

Thanks, David!

what its mean ?

I might be able to add an option to warn yourself of a transaction size of your choice. I will look into this and see if it isn't too complicated.

You have to be careful because network weight is not the same as the sum of all weight being staked. It is really just the difficulty times a large number. Stupid right?  Well this is really the only known way to calculate something close to a network weight. Might need some tweeking over time.

I am guessing still some time before 10k blocks. we only have around diff of 1 right now.

open folder options. Click on the "view" tab and check "view hidden and system files"

Then, it's under C:/users/username/appdata/roaming/hyperstake.

That's also where you want your configuration file if you're using one. (which I recommend, as you can set up RPC passwords, known good nodes and such).

Oh boy, time for the uphill battle. If HYP reaches 5 cents, I think that would be a huge milestone. Realistically, I don't see it going any higer than that with the contiuing increasing coin supply and downward pressure. Does anyone think otherwise?