Re: wifi on S3..  this is the part you need.. 
http://www.ebay.co.uk/itm/251137438628?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

You misspelled 'utilizing'.

Hey Dogie.
Bitmain says the fans are "Two 14038" (140mm) and you say they are 120mm.
Who is right?

Thanks for your quick answer =)

You can try the reset button but you'll likely have to send the controller back.

No

Hello
  I am also new to mining and wanted to say Thank you Dogie for setting up this post and to all others for there helpful answers. I have an S3+ and had trouble getting it to mine  I had  a friend who also has the same miner come over to help me. After quite a while of banging our heads he figured out in miner config of my s3+ It wont recognize any input in the form of  stratum+tcp://stratum.btcguild.com:3333 address (for example).   it will only recognize  ipb4 net addresses 127.0.0.1.53(for example)  Any input from the group?  thanks in advance  hope i worded the question right.

Your DNS Server is probably not working.

Are you using DHCP or Static IP ? If Static, make sure you have the right DNS Server set, you can use 8.8.8.8 for Google's DNS.

If DHCP, check your DHCP Settings, they should usually automatically deliver a DNS Server.

I am not sure how literally you mean that example, but mine work with http://stratum.btcguild.com:3333 (no tcp) when mining at the guild. Some pools use the tcp variant, but Slush and the guild work fine without it.