<<  >> (p.912)
    Author Topic: [ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay]  (Read 2377160 times)

    • Lightsplasher
    Sr. Member
    ****
    Offline Offline

    Activity: 371
    Merit: 250


    View Profile
    August 26, 2017, 03:55:43 PM
     #18221
    Quote from: The Frisian on August 26, 2017, 10:57:41 AM
    My wallet, version 1.4.3.0 stopped synching this morning.
    Worked like  charm until this morning.
    Does anyone knows why?


    Here’s something I noticed yesterday that might be helpful.  I’m back on the right chain now and have been using 1.4.3.0.  What I think I saw when minting just connected to the devs node:


    1. Minting on one node the blocks being accepted normally.
    2. Dev’s node receives (or creates?) a bad block with too little proof of stake.
    3. Wallet drops the node because of bad behavior.
    4. Wallet reconnects to the node because of connect call.
    5. Forking seems to happen leaving the wallet on its own fork but relaying valid blocks to the dev’s node.


    Connecting exclusively to one node and trying to make the system work might be compounding the problem.  I keep getting this error in my debug log:

    Code:
    Misbehaving: 104.128.225.215:8233 (0 -> 100) DISCONNECTING
    disconnecting node 104.128.225.215:8233
    ERROR: ProcessBlock() : block with too little proof-of-stake

    This is the dev’s node that is being disconnected.  My guess is that perhaps an incorrect version of the wallet is minting blocks and getting them relayed through this node.  It is pretty hard to keep on the right chain now – but running connected to other peers has worked for me since yesterday when this happened and I reset the block chain.

    I hope this information is useful to debug the situation.

  • drgauravxmg
    Member
    **
    Offline Offline

    Activity: 96
    Merit: 10


    View Profile
    August 26, 2017, 03:55:58 PM
     #18222
    Quote from: nsummy on August 25, 2017, 09:05:25 PM
    Quote from: 111magic on August 25, 2017, 08:49:29 PM
    Quote from: drgauravxmg on August 25, 2017, 08:46:13 PM
    Apart from all the Forking and Syncing game happening back to back, again and again, please consider posting an Absolute N00b guide for Solo Mining. From Step 0 till the end.

    Would really appreciate the help.

    Thanks!
    Yes good tip. We had some guides but the are not up to date at this moment. Magi will post a new one when all things are running fine again.

    Joe posted one yesterday actually:  http://m-core.org/solo-mine-magi/

    Thanks for the link.
    I tried it. Exactly as mentioned.

    The magi.conf file located in my /AppData/Roaming/Magi/magi.conf was edited with the mentioned codes, i.e.

    Quote
    daemon=1
    server=1
    rpcport=8232
    rpcallowip=127.0.0.1
    rpcuser=randome_username
    rpcpassword=randome_rpcpassword

    And, I ran the miner with that exact code as mentioned on that link, i.e.:
    Quote
    minerd.exe --url http://127.0.0.1:8232 --user rpcuser --pass rpcpass -t thread_numbers  -e cpu_efficiency

    (rpcuser and rpcpass were random set of characters as mentioned)

    As it starts, it says:
    Quote
    NO PAYOUT ADDRESS PROVIDED, SWITCHING TO GETWORK.

    Though, it continues the process of hashing indefinitely without saying any BOO or YAY, which, I believe is obvious because now it isn't being shared.

    What's that? What to do about no payout address provided?

  • malafaya
    Sr. Member
    ****
    Offline Offline

    Activity: 490
    Merit: 256



    View Profile
    August 26, 2017, 03:58:53 PM
     #18223
    Quote from: drgauravxmg on August 26, 2017, 03:55:58 PM
    [snip]
    What's that? What to do about no payout address provided?

    You don't have to do anything. The wallet will provide an unused address when you mine a block.

  • seeksilence
    Full Member
    ***
    Offline Offline

    Activity: 239
    Merit: 250


    View Profile
    August 26, 2017, 04:02:45 PM
     #18224
    Just tuned the apache server for better response for the website  http://104.207.149.217 . I will monitor it to see if it needs another tuning. Also add a link for the [xmgpool detail transaction] in the homepage for easy track with chainz.cryptoid.info. Automatically payout is made every half an hour.  
    xmgpool    |||    xmg.luckypool.ml (NOMP pool: port 3333 VDiff 4 *for low cpu;  port 3332 VDiff 32  *for high cpu*; AutoPayout Fee 0.01   Promotion 0.5%!   
    free bitcoin per hour 
    vultr VPS

  • Pyroboby7
    Member
    **
    Offline Offline

    Activity: 94
    Merit: 10


    View Profile
    August 26, 2017, 04:03:49 PM
    Last edit: August 26, 2017, 05:08:21 PM by Pyroboby7
     #18225
    Quote from: malafaya on August 26, 2017, 03:29:31 PM
    Quote from: pmsk on August 26, 2017, 02:57:49 PM
    Quote from: malafaya on August 26, 2017, 02:25:11 PM
    Quote from: pmsk on August 26, 2017, 02:18:59 PM
    Quote from: malafaya on August 26, 2017, 01:32:13 PM
    Quote from: minerclaim.net on August 26, 2017, 01:09:15 PM
    Hello,

    as many of you have already seen, a few pools were running of out sync the last night again. We were also affected. That means, there were blocks which wasn't valid on the right chain. It was affected a period of around 6 hours. We have updated our blockchain again and changed our banscore to a higher value again to get the chain more stable.

    However, we know that some of you lost a huge anmount of coins. We are really sorry about that. But you should know, this isn't a pool related problem, rather a general problem we all have since the last two weeks.

    In some cases its not easy to identify which pool is on the "right chain". I also would like to apologize for the fact that we also need sleep and can not always be reachable, but we try to be.

    As some you may saw, we decided to payout a part of the "wrong block" from our own funds. We talk about an anmount of ~300 XMG. We decided this due the fact that we have noticed the out of sync problem a little bit late Sad

    Will answer soon again regarding the high hashrate users.

    Hi. I can understand that fact when it relates to forking.
    But I had coins mined way before the fork happened and they were just sitting there waiting for full confirmation (520 blocks). What about those? Those blocks are still valid in the current chain. Can you identify those and pay them to miners? Not paying them is not acceptable IMO.
    I had stopped mining long before the fork happened. All my coins were and still are valid. Not paying valid coins is a pool problem.
    Looks like pool server and payment wallet are different @minerclaim. For example, some hours ago (when minerclaim was on a wrong chain) I cash out some mined before fork coins without any problems. The problem (I think) is that minerclaim payout the real coins for a forked coins, which were zero'ed. And now simply have no money for another payments. I don't really think @minerclaim fool you, just give them time to accumulate coins for pay.

    I don't know if they fooled me. Above was their answer, and it did not mention paying correctly mined coins before the fork. They prefer to pay forked coins apparently.
    I also did not get a reply from them in my case. Fortunately, it was just 5-6 XMG. So I don't lose much while assessing the pool's idoneity.
    5-6 XMG? Are you kidding me? For 2 "fork for everyone" weeks miners lost profit for hundreds coins. Payments while fork is not so professional-way, but they don't refuse payments and pay from their own wallet. Everyone makes mistakes, but the bad master differs from the normal one in how he treats his mistakes. Minerclaim admitted mistake and payout from their own income. Just stop tragicomedy and calmly wait payment.

    Not, not kidding. The principle applies to 5 XMG same as for 500 XMG. Basically, what you're saying is that it's better to pay for hundreds of forked coins than "legit" ones, especially if it's as low as 5...
    FYI, I never claimed any coins I mined while forked. I know the risks. But I do claim coins mined in the right chain.
    I don't mind waiting for my payment, but I didn't see minerclaim mentioning anything about that. It's you saying. I have no answer to my claim, not here, nor by email.
    5 XMG is just 5 XMG, but they're on the right chain and they are mine. I made sure I was on the right chain unlike many people.
    Calmly waiting for an answer to my claim from minerclaim, as small as it may seem to you...

    EDIT: P.S. I had the same problem with PoM (more than 100 XMG this time Smiley ), already resolved.

    Yep, logged into Pom just a bit ago and its at zero.  Emailed them and immediately got a response asking for what my balance was.  I told them i honestly couldn't remember exactly and guessed it at 1.6ish, id just started to mine right before the first set of issues a few weeks ago.

    So I doubt Ill get anything, but we'll see when I can get my wallet to sync up again.

    EDIT:  They made things right at Pom for what I had mined previous to the issues.   When things ate stabilized ill be back on their pool!
    XMG -  95AySiw3GaiTxf5xWBnZLLWkJ9orhyagbx

  • drgauravxmg
    Member
    **
    Offline Offline

    Activity: 96
    Merit: 10


    View Profile
    August 26, 2017, 04:06:25 PM
     #18226
    Quote from: malafaya on August 26, 2017, 03:58:53 PM
    Quote from: drgauravxmg on August 26, 2017, 03:55:58 PM
    [snip]
    What's that? What to do about no payout address provided?

    You don't have to do anything. The wallet will provide an unused address when you mine a block.

    Thank You for the response.
    But, sorry to question you again, how is that going to be credited in my m-wallet? Where and how can I check the progress? Like, we have a DASHBOARD in Mining Pools.

  • pmsk
    Newbie
    *
    Offline Offline

    Activity: 73
    Merit: 0


    View Profile
    August 26, 2017, 04:06:56 PM
     #18227
    Quote from: malafaya on August 26, 2017, 03:29:31 PM
    Quote from: pmsk on August 26, 2017, 02:57:49 PM

     5-6 XMG? Are you kidding me? For 2 "fork for everyone" weeks miners lost profit for hundreds coins. Payments while fork is not so professional-way, but they don't refuse payments and pay from their own wallet. Everyone makes mistakes, but the bad master differs from the normal one in how he treats his mistakes. Minerclaim admitted mistake and payout from their own income. Just stop tragicomedy and calmly wait payment.

    Not, not kidding. The principle applies to 5 XMG same as for 500 XMG. Basically, what you're saying is that it's better to pay for hundreds of forked coins than "legit" ones, especially if it's as low as 5...
    FYI, I never claimed any coins I mined while forked. I know the risks. But I do claim coins mined in the right chain.
    I don't mind waiting for my payment, but I didn't see minerclaim mentioning anything about that. It's you saying. I have no answer to my claim, not here, nor by email.
    5 XMG is just 5 XMG, but they're on the right chain and they are mine. I made sure I was on the right chain unlike many people.
    Calmly waiting for an answer to my claim from minerclaim, as small as it may seem to you...

    EDIT: P.S. I had the same problem with PoM (more than 100 XMG this time Smiley ), already resolved.
    I didn't said "it's better to pay for hundreds of forked coins than "legit" ones", I said pool (looks like) payout real coins for forked coins and now simply have no money to return you 5 XMR, because wallet was on a right chain and they cannt get coins back. 20 000 KH/s = 500 coins/day, with fee 1% they have 150 XMR monthly. To return all money they need months. As I said just keep calm. They cannt said this because of reputation, but you can turn on brain and realistically assess the situation.

  • Redrover
    Full Member
    ***
    Offline Offline

    Activity: 181
    Merit: 100



    View Profile
    August 26, 2017, 05:05:59 PM
     #18228
    Quote from: drgauravxmg on August 26, 2017, 04:06:25 PM
    Quote from: malafaya on August 26, 2017, 03:58:53 PM
    Quote from: drgauravxmg on August 26, 2017, 03:55:58 PM
    [snip]
    What's that? What to do about no payout address provided?

    You don't have to do anything. The wallet will provide an unused address when you mine a block.

    Thank You for the response.
    But, sorry to question you again, how is that going to be credited in my m-wallet? Where and how can I check the progress? Like, we have a DASHBOARD in Mining Pools.

    If your miner solves a block, it will show up in your wallet under a new address.  Until then, you won't actually know if it's working.
    Pools have a dashboard to show progress of what is found, your wallet is your 'dashboard,' it will show the results IF and WHEN a block is found.  Unfortunately that's as good as it gets in solo mining as far as I know.

    And realize, if you are solo mining with a single pc right now at the current network hashrate and difficulty, you will be lucky if you solve a block in a day, but the higher solo reward makes it worth it - IF you are lucky.

    Someone correct me if I'm wrong please.

  • abbeytim
    Sr. Member
    ****
    Offline Offline

    Activity: 438
    Merit: 250


    View Profile
    August 26, 2017, 05:47:42 PM
     #18229
    any news on a fix for exchanges

  • Pyroboby7
    Member
    **
    Offline Offline

    Activity: 94
    Merit: 10


    View Profile
    August 26, 2017, 05:55:20 PM
     #18230
    Quote from: abbeytim on August 26, 2017, 05:47:42 PM
    any news on a fix for exchanges

    Mining and Magi wallet only have a temporary fix, the exchange wallets are in maintenance mode until the dev rolls out a permanent fix.
    XMG -  95AySiw3GaiTxf5xWBnZLLWkJ9orhyagbx

  • abbeytim
    Sr. Member
    ****
    Offline Offline

    Activity: 438
    Merit: 250


    View Profile
    August 26, 2017, 05:57:07 PM
     #18231
    yah I heard that a few days ago

  • drgauravxmg
    Member
    **
    Offline Offline

    Activity: 96
    Merit: 10


    View Profile
    August 26, 2017, 06:12:19 PM
     #18232
    Quote from: Redrover on August 26, 2017, 05:05:59 PM
    Quote from: drgauravxmg on August 26, 2017, 04:06:25 PM
    Quote from: malafaya on August 26, 2017, 03:58:53 PM
    Quote from: drgauravxmg on August 26, 2017, 03:55:58 PM
    [snip]
    What's that? What to do about no payout address provided?

    You don't have to do anything. The wallet will provide an unused address when you mine a block.

    Thank You for the response.
    But, sorry to question you again, how is that going to be credited in my m-wallet? Where and how can I check the progress? Like, we have a DASHBOARD in Mining Pools.

    If your miner solves a block, it will show up in your wallet under a new address.  Until then, you won't actually know if it's working.
    Pools have a dashboard to show progress of what is found, your wallet is your 'dashboard,' it will show the results IF and WHEN a block is found.  Unfortunately that's as good as it gets in solo mining as far as I know.

    And realize, if you are solo mining with a single pc right now at the current network hashrate and difficulty, you will be lucky if you solve a block in a day, but the higher solo reward makes it worth it - IF you are lucky.

    Someone correct me if I'm wrong please.

    I see.
    Thank You for the response.

    Let us see if my CPU can score any. Or, say, am I lucky enough.

  • Windozxpert
    Full Member
    ***
    Offline Offline

    Activity: 196
    Merit: 100


    View Profile
    August 26, 2017, 06:36:10 PM
     #18233
    Quote from: seeksilence on August 26, 2017, 04:02:45 PM
    Just tuned the apache server for better response for the website  http://104.207.149.217 . I will monitor it to see if it needs another tuning. Also add a link for the [xmgpool detail transaction] in the homepage for easy track with chainz.cryptoid.info. Automatically payout is made every half an hour.  

    Thanks for this, I would move to your pool, but there's someone with over 1000kh/s mining there. I also noticed that no one is donating. I would be happy to move my minors over and to also donate, if it were worth it.
    There's no I in team, but there is a "Me" if you jumble it up. ~ House, M.D.

  • Myth888
    Full Member
    ***
    Offline Offline

    Activity: 343
    Merit: 102


    View Profile
    August 26, 2017, 06:38:39 PM
     #18234
    Quote from: drgauravxmg on August 26, 2017, 03:55:58 PM
    Quote from: nsummy on August 25, 2017, 09:05:25 PM
    Quote from: 111magic on August 25, 2017, 08:49:29 PM
    Quote from: drgauravxmg on August 25, 2017, 08:46:13 PM
    Apart from all the Forking and Syncing game happening back to back, again and again, please consider posting an Absolute N00b guide for Solo Mining. From Step 0 till the end.

    Would really appreciate the help.

    Thanks!
    Yes good tip. We had some guides but the are not up to date at this moment. Magi will post a new one when all things are running fine again.

    Joe posted one yesterday actually:  http://m-core.org/solo-mine-magi/

    Thanks for the link.
    I tried it. Exactly as mentioned.

    The magi.conf file located in my /AppData/Roaming/Magi/magi.conf was edited with the mentioned codes, i.e.

    Quote
    daemon=1
    server=1
    rpcport=8232
    rpcallowip=127.0.0.1
    rpcuser=randome_username
    rpcpassword=randome_rpcpassword

    And, I ran the miner with that exact code as mentioned on that link, i.e.:
    Quote
    minerd.exe --url http://127.0.0.1:8232 --user rpcuser --pass rpcpass -t thread_numbers  -e cpu_efficiency

    (rpcuser and rpcpass were random set of characters as mentioned)

    As it starts, it says:
    Quote
    NO PAYOUT ADDRESS PROVIDED, SWITCHING TO GETWORK.

    Though, it continues the process of hashing indefinitely without saying any BOO or YAY, which, I believe is obvious because now it isn't being shared.

    What's that? What to do about no payout address provided?

    Your doing it right it wont say anything until you get a block right. No yay or boo. that solo mining. If it says getwork its already connected and working and going to payout on your wallet since you did no provide a specific address.

  • Myth888
    Full Member
    ***
    Offline Offline

    Activity: 343
    Merit: 102


    View Profile
    August 26, 2017, 06:53:46 PM
     #18235
    i once sent a message to POM about being off the chain. This was before all the forks were a regular occurrence. I never got a reply from them so i always thought they didnt really respond to mails. After learning that the database were wiped clean i thought i would never get the coin i mined so i just gave up and posted here that i will not mine from them again. But after hearing people contacted them and they made it right i decided to try and to my surprise they responded so quickly and made it easy.

    POM was my favorite pool and probably would be my favorite until the end. I apologize for not contacting you 1st before i said anything. I really thought you dont respond to mails.

  • drgauravxmg
    Member
    **
    Offline Offline

    Activity: 96
    Merit: 10


    View Profile
    August 26, 2017, 07:00:11 PM
     #18236
    Quote from: Myth888 on August 26, 2017, 06:38:39 PM
    Quote from: drgauravxmg on August 26, 2017, 03:55:58 PM
    Quote from: nsummy on August 25, 2017, 09:05:25 PM
    Quote from: 111magic on August 25, 2017, 08:49:29 PM
    Quote from: drgauravxmg on August 25, 2017, 08:46:13 PM
    Apart from all the Forking and Syncing game happening back to back, again and again, please consider posting an Absolute N00b guide for Solo Mining. From Step 0 till the end.

    Would really appreciate the help.

    Thanks!
    Yes good tip. We had some guides but the are not up to date at this moment. Magi will post a new one when all things are running fine again.

    Joe posted one yesterday actually:  http://m-core.org/solo-mine-magi/

    Thanks for the link.
    I tried it. Exactly as mentioned.

    The magi.conf file located in my /AppData/Roaming/Magi/magi.conf was edited with the mentioned codes, i.e.

    Quote
    daemon=1
    server=1
    rpcport=8232
    rpcallowip=127.0.0.1
    rpcuser=randome_username
    rpcpassword=randome_rpcpassword

    And, I ran the miner with that exact code as mentioned on that link, i.e.:
    Quote
    minerd.exe --url http://127.0.0.1:8232 --user rpcuser --pass rpcpass -t thread_numbers  -e cpu_efficiency

    (rpcuser and rpcpass were random set of characters as mentioned)

    As it starts, it says:
    Quote
    NO PAYOUT ADDRESS PROVIDED, SWITCHING TO GETWORK.

    Though, it continues the process of hashing indefinitely without saying any BOO or YAY, which, I believe is obvious because now it isn't being shared.

    What's that? What to do about no payout address provided?

    Your doing it right it wont say anything until you get a block right. No yay or boo. that solo mining. If it says getwork its already connected and working and going to payout on your wallet since you did no provide a specific address.

    Perfect.
    Thank You for the response.

    Just so that everyone does it right... Your latest m-wallet with the latest blockchain has to be up and running in the background. Otherwise it can not do that RPC thing. #NoobLanguage

  • Pyroboby7
    Member
    **
    Offline Offline

    Activity: 94
    Merit: 10


    View Profile
    August 26, 2017, 07:13:25 PM
     #18237
    Quote from: Myth888 on August 26, 2017, 06:53:46 PM
    i once sent a message to POM about being off the chain. This was before all the forks were a regular occurrence. I never got a reply from them so i always thought they didnt really respond to mails. After learning that the database were wiped clean i thought i would never get the coin i mined so i just gave up and posted here that i will not mine from them again. But after hearing people contacted them and they made it right i decided to try and to my surprise they responded so quickly and made it easy.

    POM was my favorite pool and probably would be my favorite until the end. I apologize for not contacting you 1st before i said anything. I really thought you dont respond to mails.

    Indeed, I was very happy with the response time and how they made it right.  Just waiting for things to stabilize!
    XMG -  95AySiw3GaiTxf5xWBnZLLWkJ9orhyagbx

  • Historical
    Sr. Member
    ****
    Offline Offline

    Activity: 269
    Merit: 252



    View Profile
    August 26, 2017, 07:34:56 PM
     #18238
    Quote from: Pyroboby7 on August 26, 2017, 07:13:25 PM
    Quote from: Myth888 on August 26, 2017, 06:53:46 PM
    i once sent a message to POM about being off the chain. This was before all the forks were a regular occurrence. I never got a reply from them so i always thought they didnt really respond to mails. After learning that the database were wiped clean i thought i would never get the coin i mined so i just gave up and posted here that i will not mine from them again. But after hearing people contacted them and they made it right i decided to try and to my surprise they responded so quickly and made it easy.

    POM was my favorite pool and probably would be my favorite until the end. I apologize for not contacting you 1st before i said anything. I really thought you dont respond to mails.

    Indeed, I was very happy with the response time and how they made it right.  Just waiting for things to stabilize!

    Thanks guys.  Wink
    Sometimes, e-mails via POM pool contact form does not pass to gmail account.
    You can message me also here..
    Proud to be a member of Magi XMG community. 1st PoS-II |1st PoM | M7M CPU only. Come and join us! 9P5pGPV8R6eVvXFcDr4rNCQwsjA5u5wRsa

  • pmsk
    Newbie
    *
    Offline Offline

    Activity: 73
    Merit: 0


    View Profile
    August 26, 2017, 07:56:59 PM
     #18239
    Quote from: Myth888 on August 26, 2017, 06:53:46 PM
    i once sent a message to POM about being off the chain. This was before all the forks were a regular occurrence. I never got a reply from them so i always thought they didnt really respond to mails. After learning that the database were wiped clean i thought i would never get the coin i mined so i just gave up and posted here that i will not mine from them again. But after hearing people contacted them and they made it right i decided to try and to my surprise they responded so quickly and made it easy.

    POM was my favorite pool and probably would be my favorite until the end. I apologize for not contacting you 1st before i said anything. I really thought you dont respond to mails.
    Vultures flocked to the cooling corpse of a minerclaim, lol.

  • smbijan777
    Newbie
    *
    Offline Offline

    Activity: 13
    Merit: 0


    View Profile
    August 26, 2017, 08:14:30 PM
     #18240
    hello all!

    my walet note synchronized

    trying connection 93.84.198.234:8233 lastseen=1923.1hrs
    connection timeout
    trying connection 186.88.49.118:8233 lastseen=2.1hrs
    connection timeout
    trying connection 95.211.186.214:8233 lastseen=23.1hrs
    connection timeout
    trying connection 31.170.130.248:8233 lastseen=2.1hrs
    received block 86de8ce34ea897d5941c
    ProcessBlock: ORPHAN BLOCK, prev=7e7e43d7436759528cbd
    connection timeout
    trying connection 189.234.27.212:8233 lastseen=1.0hrs
    connection timeout
    trying connection 5.55.138.231:8233 lastseen=0.9hrs
    connection timeout
    trying connection 27.109.193.73:8233 lastseen=5.5hrs
    connection timeout
    trying connection 128.68.22.89:8233 lastseen=2.1hrs
    connection timeout
    trying connection 73.189.109.20:8233 lastseen=2.1hrs
    connection timeout
    trying connection 91.176.22.223:8233 lastseen=14.6hrs
    Flushed 9062 addresses to peers.dat  26ms
    connection timeout
    trying connection 93.190.139.34:8233 lastseen=9.4hrs
    connection timeout
    trying connection 172.97.231.12:8233 lastseen=16.9hrs
    connection timeout
    Pages: « 1 ... 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 [912] 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 ... 1310 »
      Print  
Page 911
Viewing Page: 912

IRLBTC™ © 2025 IRLBTC.com