Also the PSU's made this year have much Better technology the reason you guys are getting burnt wires is the input power to the PSU From the wall is not adequate or you are using a outdated supply buy a new one you will see. my connectors are not even the slightest bit warm.

PSU = EVGA Supernova 1300 watt running S5 at default FREQ and a S3 with a clock Freq of 256.6 and I can still go more.

Also have a devoted line running from your breaker box in your wall as well with its own breaker!!!!

If the INPUT POWER IS NOT adequate to the PSU the PSU will output more dc current which causes the number of electrons flowing through the wire to increase creating more friction which creates more heat this is why your miner connectors burn up!!!!

This PSU thingy has been proven in a lab many many times.


I've also done it myself. or should I say Tyself.

Has anyone tried the RAIDMAX PSUs?
In SA I can pick up the raidmax rx1000ae http://raidmax.com/psu/rx_1000ae.html PSU cheaper (R300) than the Corsair CX750(m) and similar brands. It is also rated as 80+ Gold.

note sure if it has been mentioned for antminers

But, schedueled performance profiles.

In some countries power is cheaper during the night, so a profile that lets you run at one freq during the day, and a different freq during the night - or just in certain timeframes.

Would be very nice.

Sent an email to EastHash to see if they might have an S5 compatible CGminer 4.7.0 in the works.

@437.5mhz