you should read my message before your post.
I have NOT done the NO FEE OPTION.
The positive from the virus detection does not always come up on every miner. do your homework mate.
The experts at Dwarfpool clearly stated that my wallet has been replaced by another when dropping from 130mh's to 80'mh's.
I am not new to mining and never had this problem before.

I know that is how the DEV fee works, However that is not the case as Claymore does not mine at 80mh's when he could mine at my full speed, Also when It is mining at that speed in the logs its not the DEV fee mining and the miner stops, then starts the DEV fee with his wallet.

Are you using the correct Claymore miner? please post your .bat file settings and your Hardware specifications to help you out more.

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
-mode 1

EthDcrMiner64.exe -etht 200, -epool http://127.0.0.1:8080, -ewal ---------------------, -epsw x, -ethi 8 -estale 1
-esm 1
-allpools.

Msi x370 gaming pro carbon M/b.
Amd ryzen 7 cpu.
16g 2667 Fury ram.
M.2 hdd.
x4 msi gaming x rx580 8gb  with modded bios-es .
x2 on ribbon risers in crossfire and x2 on usb risers.
Amd Block chain drivers.
1200w corsair platinum psu

i also use it for gaming that is why it is not a cheap cpu and such.

@Stevross, Are you on the same problem as Kgminer? you are not using the correct pool are you trying to do solo mining without pools?

Are you on the same problem as Kgminer? sorry no Idea. As for the http It would not connect to ETHproxy without it for some reason.and the speed seems to have improved a bit. as for the Allpols I was not sure what to specify. Cheers.

OK, I am confused: you show commands that look like they are stored in a CONFIG.TXT parameter file, but then you show what appears to be a command-line with parameters.

You can't have both: if there are parameters on the command-line, the CONFIG.TXT file is ignored not used.  Since "-etht 200" is the default, adding it in CONFIG.TXT or on the command-line just adds one more step to the preparation phase.  Why are you asking it to use "qtminer" mode (-esm 1)?

I think the main problem is that you appear to be shooting for a solo mining configuration, as far as I can tell?  You don't show anything about a process running on your own port 8080 - which normally would be a web-based protocol.  Whassup?

-esm 1" option to enable "qtminer" mode, in this mode pool will display additional information about shares (accepted/rejected), for example:accepted/rejected), for example:
   EthDcrMiner64.exe -epool us1.ethermine.org:4444 -esm 1 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool stratum+tcp://yiimp.ccminer.org:3252 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dp

Im forwarding the miner through a proxy config  directly to Dwarfpool as I have been having a wallet changing problem......
https://github.com/Atrides/eth-proxy

###
# Examples of command line for miners:
#
#   ethminer.exe --farm-recheck 200 -G -F http://HOST:PORT/
#   ethminer.exe --farm-recheck 300 -G -F http://HOST:PORT/rig1
#
#   ethminer.exe -G -F http://127.0.0.1:8080/
#   ethminer.exe --farm-recheck 100 -G -F http://192.168.0.33:8080/rig1
#
#  farm-recheck parameter is very individual. Just test different values.
#
#  You can submit shares without workername or
#  You can provide workername:
#   - with url like "/rig1"
#   - or use automatically numbering(integer) based on IP of miner
#
#  Servers:
#    EU-Server:  eth-eu.dwarfpool.com  (France)
#    US-Server:  eth-us.dwarfpool.com  (EastCoast: Montreal,Canada)
#    US-Server:  eth-us2.dwarfpool.com (WestCoast: Las Vegas)
#    RU-Server:  eth-ru.dwarfpool.com  (Moscow)
#    RU-Server:  eth-ru2.dwarfpool.com  (Moscow)
#    CN-Server:  eth-cn.dwarfpool.com  (Shanghai)
#    SG-Server:  eth-sg.dwarfpool.com  (Singapore)
#    AU-Server:  eth-au.dwarfpool.com  (Melbourne)
#    ASIA-Server:  eth-asia.dwarfpool.com  (Taiwan)
#
###

# Select Ethereum ETH or Expanse EXP
COIN = "ETH"

# Host and port for your workers
HOST = "127.0.0.1"
PORT = 8080

# Coin address where money goes
WALLET = "-------------------------------------------"

# To donate please use wallet "0xea7263feb7d8a8ab0a11eedd8f1ce04412ab0820"

# It's useful for individually monitoring and statistic
ENABLE_WORKER_ID = True

# On DwarfPool you have option to monitor your workers via email.
# If WORKER_ID is enabled, you can monitor every worker/rig separately.
MONITORING = True
MONITORING_EMAIL = "9@gmail.com"

# Main pool
POOL_HOST = "eth-au.dwarfpool.com"
POOL_PORT = 8008

# Failover pool
POOL_FAILOVER_ENABLE = True

POOL_HOST_FAILOVER1 = "eth-ru.dwarfpool.com"
POOL_PORT_FAILOVER1 = 8008

POOL_HOST_FAILOVER2 = "eth-us.dwarfpool.com"
POOL_PORT_FAILOVER2 = 8008

POOL_HOST_FAILOVER3 = "eth-asia.dwarfpool.com"
POOL_PORT_FAILOVER3 = 8008


# Logging
LOG_TO_FILE = True

# Enable debug
DEBUG = False

After removing overclocking, you still get this error for both - or one?  What are the cards and what's the base clock (and what you were using for OC)??

Hello guys,

Can someone help with keccak config? I just can't make it work.
Dualmining with decred blake2s pasc works perfect.
With keccak I always receive "authorization failed" . I'm 100% sure that the username/password are valid ( same setup as for decred on suprnova ) and still doesn't work.
I did try to create accounts on different pools, always the same.
I have no clue what I'm doing wrong or what's the issue.
I'm using epools.txt and dpools.txt for my pools, and start.bat to start the miner .
epools.txt: POOL: eu1-etc.ethermine.org:4444, WALLET: 0x72*******************.rig5, PSW: x, ESM: 0, ALLPOOLS: 1
dpools.txt POOL: hub.miningpoolhub.com:20461, PSW: ******, WORKER: *****.rig5, ESM: 0, ALLPOOLS: 1

The -dcoin keccak it's set in start.bat

Same config for decred works, for keccak no.

Thanks.