I tested nlpool yesterday, after 24h of mining no block were found or at least show in my account, so I move to another pool. Something it is not working well at nlpool, maybe they need more time, at the begining I found very good performance but now its not the same.

I cant understand at nlpool it says payout every 1 hour, but its not. My last payout is 9 hours ago, definately not every hour

--edit--

Also too many rejects atm from nlpool on blake2s XVG

There is a factor of luck already explained by the admin of the pool. Today pool can mine 5 blocks instead of 10 that should mine, but tomorrow can mine 20. It's all about patience.

what pools for blake2s xvg?

I am currently trying out coinfoundry.  Have switched from uni, antmine and zpool as returns were no where near w2m reported.
ttps://coinfoundry.org

wow this is neat. thanks sir.

so basically, i just paste this in reboot.bat and add parameter -minspeed x -r 1 to miner.bat?

pardon me, your code is quite unfamiliar to me. can you guide me a step by step if im missing something?

thanks.

what im trying to do is if speed 390mh/s is not achieved (of course due to unexpected circumstances such as gpu hanging, or crashed. yes, -wd 1 does that. but i want to include overdriventool's oc as well. -wd 1 or -minspeed just restarts ethdcrminer64.exe, not the entire miner.bat that includes my overdriventool parameters)

so if -minspeed is triggered, and -r 1 is enabled, it will call reboot.bat i believe.

so according to your quote, i just need to paste your whole quote in reboot.bat am i right?

btw, im curious to this, what does this basically do:

do i need to download/install devcon or is it included in win 10?

based on my understanding, it reenables amd gpu drivers. however, i have 13 gpus, does it reenable all 13?

edit:
i googled it, most of it talks about vegas, does it work with rx570?

edit:
i just explored my device manager, upon checking rx570's property>event

mine is:

thanks

@ollis

great! thanks for your big help. i was looking for this foolproof solution.

taskkillf wont really help much because of dag creation stuck.

i believe restarting driver will really solve it.

thanks.

NLPool didn’t have an orphan today and if memory serves me correctly 12 or so blocks. Certainly looking better.

Same here but with reds (4x Nitro+ 570 & 2x Nitro+ 580) + Win10 x64. After 1-2-4 hours new "Claymore Dual Miner 11" shows me "GPU hangs in open CL...". And it can be GPU 3 or GPU 4 or GPU 5, just randomly. Tried it all with different settings, set no memory errors at HWinfo, changed PSU, changed all risers, tried ETH-only mining - the result is the same, hangs - miner restart windows by "-r" command and again.

Mr.Claymore I deeply respect you for all the work you've done here but please clear the situation. I also see that a lot of people are facing the same issues. Thanks.

Sorry for long post.

I am attempting to use Claymore's Dual Miner V11 to mine Ethereum/XVG. I have also attempted using the ETH only mining mode. Whenever I run the start.bat, my computer hangs and then crashes every single time causing hard boot after this step: "Create GPU Buffer for GPUX" - the GPU has changed to all of them (0-5) through multiple attempts. I have attempted to run the miner with each single GPU (and other 5 disconnected) unsuccessfully. I have tested the miner on my regular desktop and bat file runs without difficulty.

Here are my specs:
x6 XFX Radeon 570 (all 6 cards appear in device manager - DDU successfully run - all changed to compute mode via AMD settings - current software version 18.2.1 adrenalin)
Intel Pentium G4400 Skylake Dual-Core 3.3 GHz
4GB Kingston HyperX FURY Black 2133MHz DDR4 (have also attempted x2 for 8GB without success)
ASUS Z170 Maximus VIII (bios updated via EZ FLASH)
EVGA SuperNOVA 1200W P2 80+ PLATINUM
Silicon Power 60GB SSD (have attempted running this as a third output for the 3 SATA cables each running two of the GPUs and given its own 4th SATA cable)
Windows 10 (installed via bootable UEFI USB)

Bios settings:
DMI max link speed gen 2
PEG PCI link speed gen 2
PCIE confing PCIE speed gen 2
Disabled LED Lighting
Disabled HD Audio
Above 4G Decoding Enabled
Disabled Integrated Graphics (this was necessary for system to recognize 6 GPU)

Windows settings:
Disabled windows firewall/defender/antivirus
Ran Windows 10 Registry tweaks for mining.bat (from mining.help)
Ran Windows update (now disabled)
Have changed virtual memory settings (attempted low end from suggested to 16000 and high end from 20000-24000)

start.bat file:
EthDcrMiner64.exe -epool us2.ethermine.org:4444 -ewal WalletNumber.WalletName -epsw x -dpool stratum+tcp://xvg.eu1.unimining.net:5770 -dwal WalletNumber -dpsw c=XVG -dcoin blake2s
have also attempted to mod -gser and this seemed to slightly delay the crash
have also attempted to mod -lidag and this seemed to slightly delay the crash

Windows logs show this critical error with every crash:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

I'm at my wits end as far as what else to try. Any ideas are appreciated.

Edit: have not changed GPU BIOS or attempted overclocking/undervolting yet.