<<  >> (p.1262)
    Author Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)  (Read 6591484 times)

    • Pericle13
    Newbie
    *
    Offline Offline

    Activity: 29
    Merit: 1


    View Profile
    May 08, 2019, 06:07:35 PM
    Last edit: May 08, 2019, 08:37:22 PM by Pericle13
     #25221
    Quote from: Claymore on May 08, 2019, 03:09:18 PM
    Quote from: sweetydady on May 08, 2019, 03:03:16 PM
    good lord, Claymore, I have rx480 8 gb samsung, using latest 14th ver and reaching only 28.8mh/s, any help to see those 33mh/s?

    I use "-strap 1@2250" or even "-strap 3@2250" for these cards, read Readme for more details.

    Hi Claymore what is the maximum strap number we can use? Above is 3, and I see in other of your posts 4.
    Can we go beyond?

    later edit: nevermind, I found it - it is 5 Smiley

  • sanhwy
    Newbie
    *
    Offline Offline

    Activity: 13
    Merit: 2


    View Profile
    May 08, 2019, 07:23:30 PM
     #25222
    Quote from: Pericle13 on May 08, 2019, 06:07:35 PM
    Quote from: Claymore on May 08, 2019, 03:09:18 PM
    Quote from: sweetydady on May 08, 2019, 03:03:16 PM
    good lord, Claymore, I have rx480 8 gb samsung, using latest 14th ver and reaching only 28.8mh/s, any help to see those 33mh/s?

    I use "-strap 1@2250" or even "-strap 3@2250" for these cards, read Readme for more details.

    Hi Claymore what is the maximum strap number we can use? Above is 3, and I see in other of your posts 4.
    Can we go beyond?

    i have tested saphire rx480 8gb samsung with -strap 1@2250 and make 32.4 Mh but the only problem is that apears allot of GPU Memory Errors on HwiNfo
    Claymore you don't have any errors with mcclock 2250 ?

  • UnclWish
    Sr. Member
    ****
    Offline Offline

    Activity: 1484
    Merit: 253


    View Profile
    May 08, 2019, 07:27:07 PM
     #25223
    Tried on rig with rx 580 8G hynix memory... All straps up to 4 gives lower speed than my straps with the max 2250MHz MC. Best variant is 2nd strap on 2250MHz. But it still a bit lower than my strap.
    Notices:
    1. Often if strap set to 0 for use straps from vbios, miner at start can hang the system. But if didn't use -straps option miner always start fine. In vbios flashed eth straps.
    2. Often miner hangs system on close if -straps option used.
    3. If I use my manual strap (96 symbols) miner can hang on start, and everytime hang on close. But if these strap flashed to vbios and didn't used -straps option, miner works fine.

  • Bojcha
    Hero Member
    *****
    Offline Offline

    Activity: 848
    Merit: 500



    View Profile
    May 09, 2019, 02:21:38 AM
     #25224
    Same here 4gb Hynix - my straps better then miner straps. Will check for elpida and samsung.

  • cantr
    Member
    **
    Offline Offline

    Activity: 124
    Merit: 10


    View Profile
    May 09, 2019, 06:42:58 AM
     #25225
    Is it possible to mine etherum with RX 570 4GB

    4 GB ram & Claymore V14 & Crimson-Blockchain-Workloads-Aug23 driver?

    9:40:53:888   ad0   ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
    09:40:53:889   ad0   ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
    09:40:54:937   910   Setting DAG epoch #257 for GPU2
    09:40:54:938   9a4   Setting DAG epoch #257 for GPU5
    09:40:54:936   908   Setting DAG epoch #257 for GPU0
    09:40:54:937   90c   Setting DAG epoch #257 for GPU1
    09:40:54:938   910   Create GPU buffer for GPU2
    09:40:54:941   9a4   Create GPU buffer for GPU5
    09:40:54:941   9a4   GPU5 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
    09:40:54:941   968   Setting DAG epoch #257 for GPU4
    09:40:54:943   910   GPU2 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
    09:40:54:946   9a4   GPU5 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
    09:40:54:940   954   Setting DAG epoch #257 for GPU3
    09:40:54:942   968   Create GPU buffer for GPU4
    09:40:54:947   910   GPU2 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
    09:40:54:944   908   Create GPU buffer for GPU0
    09:40:54:950   908   GPU0 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
    09:40:54:951   968   GPU4 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
    09:40:54:951   954   Create GPU buffer for GPU3
    09:40:54:952   908   GPU0 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
    09:40:54:945   90c   Create GPU buffer for GPU1
    09:40:54:954   90c   GPU1 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
    09:40:54:954   968   GPU4 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
    09:40:54:956   954   GPU3 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU
    09:40:54:964   90c   GPU1 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
    09:40:54:966   954   GPU3 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

    09:40:57:726   ad0   buf: {"id":0,"jsonrpc":"2.0","result":["0x9c719cc25c219332ef88dbbd73abf1e48fca42223aeb01f716a22bcf250e6c9b","0x93f354b70a7d7c61afe4207756333d6c82f83d8677d29045fa92846532cf8881","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x75df53"]}

    09:40:57:730   ad0   ETH: 05/09/19-09:40:57 - New job from eu1.ethermine.org:4444
    09:40:57:732   ad0   target: 0x0000000112e0be82 (diff: 4000MH), epoch 257(3.01GB)
    09:40:57:735   ad0   ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
    09:40:57:738   ad0   ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
    09:40:57:948   9a4   Set global fail flag, failed GPU5
    09:40:57:953   9a4   GPU 5 failed
    09:40:57:950   910   Set global fail flag, failed GPU2
    09:40:57:959   910   GPU 2 failed
    09:40:57:961   91c   Setting DAG epoch #257 for GPU2
    09:40:57:955   908   Set global fail flag, failed GPU0
    09:40:57:968   908   GPU 0 failed
    09:40:57:958   968   Set global fail flag, failed GPU4
    09:40:57:967   90c   Set global fail flag, failed GPU1
    09:40:57:976   90c   GPU 1 failed
    09:40:57:989   968   GPU 4 failed
    09:40:57:991   91c   GPU2, OpenCL error -38 - cannot write buffer for DAG
    09:40:57:952   9a0   Setting DAG epoch #257 for GPU5
    09:40:58:000   9a0   GPU5, OpenCL error -38 - cannot write buffer for DAG
    09:40:57:989   8f4   Setting DAG epoch #257 for GPU1
    09:40:58:002   8f4   GPU1, OpenCL error -38 - cannot write buffer for DAG
    09:40:57:968   954   Set global fail flag, failed GPU3
    09:40:57:975   964   Setting DAG epoch #257 for GPU4
    09:40:58:006   964   GPU4, OpenCL error -38 - cannot write buffer for DAG
    09:40:58:015   954   GPU 3 failed
    09:40:58:006   860   Setting DAG epoch #257 for GPU0
    09:40:58:015   950   Setting DAG epoch #257 for GPU3
    09:40:58:016   950   GPU3, OpenCL error -38 - cannot write buffer for DAG
    09:40:58:018   860   GPU0, OpenCL error -38 - cannot write buffer for DAG
    09:40:59:252   1bd8   Quit, please wait...

  • Digital_Seytan
    Jr. Member
    *
    Offline Offline

    Activity: 222
    Merit: 2

    digiseytan@walletofsatoshi.com


    View Profile WWW
    May 09, 2019, 11:23:55 AM
     #25226
    Quote from: cantr on May 09, 2019, 06:42:58 AM
    Is it possible to mine etherum with RX 570 4GB

    4 GB ram & Claymore V14 & Crimson-Blockchain-Workloads-Aug23 driver?

    it is possible at least until now with Phoenixminer
    DonateSATS:Digiseytan@WALLETOFSATOSHi.COM
    SHOPFREE: https://satsback.com/register/1QEJyGPlg4LN5kwx
    ETC+Zil Pool:https://k1pool.com/invite/895eb07555

  • Digital_Seytan
    Jr. Member
    *
    Offline Offline

    Activity: 222
    Merit: 2

    digiseytan@walletofsatoshi.com


    View Profile WWW
    May 09, 2019, 11:24:19 AM
     #25227
    Hello CM dev is it possible with claymoreminer dual mining ethereum based coin and nimic coin?
    DonateSATS:Digiseytan@WALLETOFSATOSHi.COM
    SHOPFREE: https://satsback.com/register/1QEJyGPlg4LN5kwx
    ETC+Zil Pool:https://k1pool.com/invite/895eb07555

  • sobololeg1978@gmail.com
    Newbie
    *
    Offline Offline

    Activity: 1
    Merit: 0


    View Profile
    May 10, 2019, 07:30:05 AM
     #25228
    Hello ! I have a mine on the old r9 290 and r9 290x cards, can you tell me if you can apply it - strap to them?

  • tytanick
    Legendary
    *
    Offline Offline

    Activity: 2660
    Merit: 1096


    Simplemining.net Admin


    View Profile WWW
    May 10, 2019, 09:48:25 AM
     #25229
    Claymore, do you know what a mess was when You was not so active ?
    Like everyone started to release own miner program...

    Anyway, i will get to the point.
    Do You expect releasing Linux version of v14 and will it support applying custom straps or that will not be possible under linux ?
    Right now we have tool called amdmemorytweak which can modify timings (straps) in Linux for example for Vega.
    And it is working fine in SimpleMining.net OS under Linux. Yet Polaris is not so obvious for that tool.

    Also may i ask ? You have more downloads for Windows versions or Linux versions ?
    Oh wait, that is bad comparison.... In Plug&Play Operating System based on linux we are downloading miner once and then people are downloading those from our servers.
    Can you tell me if you see that more users are USING windows version than linux version ?
    I am really curious if people are still using windows for mining and this is why windows comes first or is it other factor ?
    Manage your GPU farm the easy way with Mining OS (30 days free):  SimpleMining.net
    Support available at Discord: https://simplemining.net/page/discord and admin@simplemining.net
    Bitcointalk thread: https://bt.irlbtc.com/view/1541084.0

  • Claymore (OP)
    Donator
    Legendary
    *
    Offline Offline

    Activity: 1610
    Merit: 1325

    Miners developer


    View Profile
    May 10, 2019, 10:37:17 AM
     #25230
    Quote from: sobololeg1978@gmail.com on May 10, 2019, 07:30:05 AM
    Hello ! I have a mine on the old r9 290 and r9 290x cards, can you tell me if you can apply it - strap to them?

    No way, at least for now.

    Quote from: tytanick on May 10, 2019, 09:48:25 AM
    Claymore, do you know what a mess was when You was not so active ?
    Like everyone started to release own miner program...

     Smiley

    Quote from: tytanick on May 10, 2019, 09:48:25 AM
    Anyway, i will get to the point.
    Do You expect releasing Linux version of v14 and will it support applying custom straps or that will not be possible under linux ?
    Right now we have tool called amdmemorytweak which can modify timings (straps) in Linux for example for Vega.
    And it is working fine in SimpleMining.net OS under Linux. Yet Polaris is not so obvious for that tool.

    Due to several reasons I'm not going to implement it for Linux. The main reason is that I don't have enough experience in Linux kernel/drivers and it would take too much time and efforts to get enough level of expertise; applying entire straps on the fly is rather hard magic.

    Quote from: tytanick on May 10, 2019, 09:48:25 AM
    Also may i ask ? You have more downloads for Windows versions or Linux versions ?
    Oh wait, that is bad comparison.... In Plug&Play Operating System based on linux we are downloading miner once and then people are downloading those from our servers.
    Can you tell me if you see that more users are USING windows version than linux version ?
    I am really curious if people are still using windows for mining and this is why windows comes first or is it other factor ?

    I don't have any good stats for Windows vs Linux downloads/using.
    Yes I support Windows better, again the main reason that I have almost 20 years experience in Windows software development and almost zero experience in Linux.
    Please read Readme and FAQ in the first post of this thread before asking any questions, probably the answer is already there.
    List of my miners: https://bt.irlbtc.com/view/3019607

  • boxraider
    Newbie
    *
    Offline Offline

    Activity: 17
    Merit: 0


    View Profile
    May 10, 2019, 11:41:13 PM
    Last edit: May 10, 2019, 11:51:28 PM by boxraider
     #25231
    Hey Claymore,

    I'm pretty dang confused about some pretty basic stuff. I'm not sure if this means i am connected to stratum or not but,

    [[ETH: Stratum - connecting to 'us2.ethpool.org' <172.65.214.179> port 3333 (unsecure)
    ETH: Stratum - Connected (us2.ethpool.org:3333) (unsecure)]]

    ive changed the ports to 4444 and 14444 on ethpool but couldnt connect

    Been on it for a few days, but can't seem to connect to the stratum port.

    any suggestions on where to punch in stratum+ssl://? tried it in config, epools, .bat or if what im doing is so backwards lol
    thanks guys

  • astaxr
    Newbie
    *
    Offline Offline

    Activity: 4
    Merit: 0


    View Profile
    May 11, 2019, 01:59:11 AM
     #25232
    I have powercolor red dragon rx570 4gb and running with claymore v12, its get 29Mh/s. when running with claymore v14, its get 22.5Mh/s. I'm using same setting for both version
    claymore v14 decreased my hash power, how could this happen. is there still a bug?

  • Blooregardqcazoo
    Newbie
    *
    Offline Offline

    Activity: 14
    Merit: 1


    View Profile
    May 11, 2019, 03:05:10 AM
     #25233
    @Claymore

    Thank you for a long-lasting awesome miner..

    One question/request: is it possible to adjust the timeout for -minspeed, which seems to be currently hardcoded at 5 mins? Would be really nice to be able to adjust that.

  • swogerino
    Legendary
    *
    Offline Offline

    Activity: 3724
    Merit: 1258



    View Profile
    May 11, 2019, 06:23:40 AM
     #25234
    Quote from: astaxr on May 11, 2019, 01:59:11 AM
    I have powercolor red dragon rx570 4gb and running with claymore v12, its get 29Mh/s. when running with claymore v14, its get 22.5Mh/s. I'm using same setting for both version
    claymore v14 decreased my hash power, how could this happen. is there still a bug?

    I think is still in beta testing  the latest version revision 14.I am sure Claymore will fix things in the upcoming days because I believe it is a bug in the miner and it will be sorted out soon.
    ▄███████████████████▄
    ███████▀█████████████████
    ████▌██████▀▀▀▀██████████
    ████▌███████████▀▀███████
    ████▌████▄▄████▄▄██▀█████
    ████▌███████████████▀████
    ████▌██████▀██▀██████████
    ████▌█████▄████▄▄▄▄██████
    ████▌██▀████▄▄████▀██████
    ████████▀████████▀██▄████
    ██████▄████▀▀▀▀████▄█████
    █████████▄▄████▄▄████████
    ▀███████████████████▀
    		.
     BC.GAME     		███████████████
    ███████████████
    ███████████████
    ███████████████
    ██████▀░▀██████
    ████▀░░░░░▀████
    ███░░░░░░░░░███
    ███▄░░▄░▄░░▄███
    █████▀░░░▀█████
    ███████████████
    ███████████████
    ███████████████
    ███████████████    		███████████████
    ███████████████
    ███████████████
    ███████████████
    ███░░▀░░░▀░░███
    ███░░▄▄▄░░▄████
    ███▄▄█▀░░▄█████
    █████▀░░▐██████
    █████░░░░██████
    ███████████████
    ███████████████
    ███████████████
    ███████████████    		███████████████
    ███████████████
    ███████████████
    ███████████████
    ██████▀▀░▀▄░███
    ████▀░░▄░▄░▀███
    ███▀░░▀▄▀▄░▄███
    ███▄░░▀░▀░▄████
    ███░▀▄░▄▄██████
    ███████████████
    ███████████████
    ███████████████
    ███████████████    		│
    │
    DEPOSIT BONUS
    .1000%.
    GET FREE
    ...5 BTC...
    		│
    │
    REFER & EARN
    ..$1000 + 15%..
    COMMISSION
    		│
    │
     Play Now 

  • Claymore (OP)
    Donator
    Legendary
    *
    Offline Offline

    Activity: 1610
    Merit: 1325

    Miners developer


    View Profile
    May 11, 2019, 07:14:50 AM
    Last edit: May 11, 2019, 07:37:15 AM by Claymore
     #25235
    Quote from: astaxr on May 11, 2019, 01:59:11 AM
    I have powercolor red dragon rx570 4gb and running with claymore v12, its get 29Mh/s. when running with claymore v14, its get 22.5Mh/s. I'm using same setting for both version
    claymore v14 decreased my hash power, how could this happen. is there still a bug?

    What version of AMD drivers do you use? Start miner for a minute and send me the complete log file so I can check the details, for both v12 and v14.
    Please read Readme and FAQ in the first post of this thread before asking any questions, probably the answer is already there.
    List of my miners: https://bt.irlbtc.com/view/3019607

  • JaxoN777
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    May 11, 2019, 07:33:19 AM
     #25236
    Thanks for version revision 14  Cheesy

  • astaxr
    Newbie
    *
    Offline Offline

    Activity: 4
    Merit: 0


    View Profile
    May 11, 2019, 01:56:40 PM
    Last edit: May 11, 2019, 03:11:09 PM by astaxr
     #25237
    Quote from: swogerino on May 11, 2019, 06:23:40 AM
    Quote from: astaxr on May 11, 2019, 01:59:11 AM
    I have powercolor red dragon rx570 4gb and running with claymore v12, its get 29Mh/s. when running with claymore v14, its get 22.5Mh/s. I'm using same setting for both version
    claymore v14 decreased my hash power, how could this happen. is there still a bug?

    I think is still in beta testing  the latest version revision 14.I am sure Claymore will fix things in the upcoming days because I believe it is a bug in the miner and it will be sorted out soon.

    Quote from: Claymore on May 11, 2019, 07:14:50 AM
    Quote from: astaxr on May 11, 2019, 01:59:11 AM
    I have powercolor red dragon rx570 4gb and running with claymore v12, its get 29Mh/s. when running with claymore v14, its get 22.5Mh/s. I'm using same setting for both version
    claymore v14 decreased my hash power, how could this happen. is there still a bug?

    What version of AMD drivers do you use? Start miner for a minute and send me the complete log file so I can check the details, for both v12 and v14.

    thans for your reply. I'm using amd block chain driver 17.30.1029. the red dragon card is on GPU0, the other cards are red devil and it has no effect in hash.

  • Claymore (OP)
    Donator
    Legendary
    *
    Offline Offline

    Activity: 1610
    Merit: 1325

    Miners developer


    View Profile
    May 11, 2019, 02:31:39 PM
     #25238
    Quote from: astaxr on May 11, 2019, 01:56:40 PM
    thans for your reply. I'm using amd block chain driver 17.30.1029. the red dragon card is on GPU0, the other cards are red devil and it has no effect in hash.

    Please remove your message or take log data in "code" tag, it's too large.
    Try to press "0" key to disable mining on GPU0, wait about 10 seconds and then press "0" again to enable it - what hashrate do you see now?
    Please read Readme and FAQ in the first post of this thread before asking any questions, probably the answer is already there.
    List of my miners: https://bt.irlbtc.com/view/3019607

  • br2459
    Full Member
    ***
    Offline Offline

    Activity: 269
    Merit: 102


    View Profile
    May 11, 2019, 02:47:38 PM
     #25239
    I am not sure if I am the only one but, with V14 my NVIDIA cards are completely ignored. I have a mixed rig of AMD and NVIDIA and the NVIDIA cards were ignored. It started the miner and said there was no NVIDIA cards detected. Windows saw them just fine. I went back to 12 and it works fine with them. I looked through the Readme to see if there was anything specific to enable NVIDIA with this version and I found nothing specific. Just curious if anyone has this issue.
    |## MINERSTAT.COM ##|
    |## Save     on time without losing the profits ##|

  • astaxr
    Newbie
    *
    Offline Offline

    Activity: 4
    Merit: 0


    View Profile
    May 11, 2019, 03:12:01 PM
     #25240
    Quote from: Claymore on May 11, 2019, 02:31:39 PM
    Quote from: astaxr on May 11, 2019, 01:56:40 PM
    thans for your reply. I'm using amd block chain driver 17.30.1029. the red dragon card is on GPU0, the other cards are red devil and it has no effect in hash.

    Please remove your message or take log data in "code" tag, it's too large.
    Try to press "0" key to disable mining on GPU0, wait about 10 seconds and then press "0" again to enable it - what hashrate do you see now?

    thanks i will try it later
    Pages: « 1 ... 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 [1262] 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 ... 1409 »
      Print  
Page 1261
Viewing Page: 1262

IRLBTC™ © 2025 IRLBTC.com