Hi,

it was little bit hard to understand your examples how to put different straps and clocks to multiple cards.
Got it after time but you could put better example to readme.

I think the straps for Samsung are the same as Ubermix because i got same results but the hynix straps were better
than mine.

RIG 1: (900w from the wall, 6 cards)
-Sapphire rx480/8G (Samsung), -strap 1@2050, 30,5Mh/s,(AfterBurner, CoreV -100, Power -40%, CC 1050)

RIG 2: (700w from the wall, 6 cards)
-Gigabyte rx470/4G (Hynix), -strap 1@1930, 27,5Mh/s, 4 cards. (AB, CoreV -98, Power -20%, CC 1050)
-Sapphire rx470/4G (Samsung),  -strap 1@2000, 30Mh/s, 2 cards. (AB, CoreV -98, Power -20%, CC 1050)

I hope rigs are stable now, they have been running now for  24h.

Both Claymore 14, AMD 19.4.3.

Thank you again

Support for Vega straps is almost ready, I will release new version in a day.

PS. Not sure if I should also add support for old AMD cards before working on Nvidia...

Hi!
RX480/4Gb Hynix + 4xRX470/4Gb Hynix, ~30,8MH/s=~154MH/s, 1150/2100MHz on v12 & Blockchain driver. Should I upgrade to v14 and install 19.4.3 or change the settings?

It seems v14.0 cannot apply overclock sometimes for blockchain drivers, I will check it. It seems a lot of people still use blockchain drivers...

with 18.6.1 drivers have error

GPU #0 strap "POL4H3" failed: unsupported video driver, install recent AMD drivers

I am getting a hard reset everytime I try any of the straps. I have testing mode enabled, secure boot off, driver 19.4.1 installed and 8 hynix rx580 8gb cards on win 10. When it goes to apply straps, it gets to the point where it shows the strap has been applied to the 2nd card and then...boom, reset. Tried with all levels of strap (1->5). I am setting the clocks with overdriventool externally, at 1751mhz (pretty low for testing sake).

How do the miner know what straps that are best? I have the same cards just with different memory brand.
I already have 31.8 on all cards. Will I get more now?

My oc settings are tuned from what my straps are today.
Will claymore notice my oc and then apply the best straps to void errors?

Have you tried to copy files from CUDA10 directory? In next update miner will use CUDA10 by default.

I tried it after this post and it is almost same with cuda10.