<<  >> (p.1268)
    Author Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)  (Read 6591484 times)

    • adaseb
    Legendary
    *
    Offline Offline

    Activity: 4046
    Merit: 1762



    View Profile
    May 16, 2019, 07:23:39 AM
     #25341
    I have tried this version and its my first time returning to mining ETH since last November 2018. I must say that this version is much more stable than the previous versions.

    Basically did nothing except replace the pools and config file and it worked right way. I got decent speeds without having to do much tweeking with the straps or memory clock. Most important I've never gotten a system hang before which was frequent before. Especially if it was a computer I used to browse the web.

  • mu_enrico
    Copper Member
    Legendary
    *
    Offline Offline

    Activity: 2898
    Merit: 2259


    Slots Enthusiast & Expert


    View Profile WWW
    May 16, 2019, 08:04:04 AM
     #25342
    I tried v14.2 in Windows 10 and made my Windows 10 running in test mode...
    My cards are RX550 4GB and RX560 4GB with custom bios, tried with -strap 1 and got worse hashrate Grin
    So I disabled -strap and it seems that this version run as stable as v12.0
    I'll give you update after 24 hours or so.
    │
    ███████████████████████
    ███████████████████████
    ███████████████████████
    ███████████████████████
    ███▀▀▀█████████████████
    ███▄▄▄█████████████████
    ███████████████████████
    ███████████████████████
    ███████████████████████
    █████████████████████
    ███████████████████
    ███████████████
    ████████████████████████
    ███████████████████████████
    ███████████████████████████
    ███████████████████████████
    █████████▀▀██▀██▀▀█████████
    █████████████▄█████████████
    ████████▄█████████▄████████
    █████████████▄█████████████
    █████████████▄█▄███████████
    ██████████▀▀█████████████
    ██████████▀█▀██████████
    ▀███████████████████▀
    ▀███████████████▀
    █████████████████████████
    O F F I C I A L   P A R T N E R S
    ▬▬▬▬▬▬▬▬▬▬
    ASTON VILLA FC
    BURNLEY FC
    		BK8?.
    ..PLAY NOW..

  • rednoW
    Legendary
    *
    Offline Offline

    Activity: 1510
    Merit: 1003


    View Profile
    May 16, 2019, 08:16:10 AM
     #25343
    gtx1070 micron from 32.8 to 35 mhs - nice!

  • Marvell2
    Full Member
    ***
    Offline Offline

    Activity: 1148
    Merit: 132


    View Profile
    May 16, 2019, 08:22:48 AM
     #25344
    Quote from: rednoW on May 16, 2019, 08:16:10 AM
    gtx1070 micron from 32.8 to 35 mhs - nice!

    wow thats impressive, what memory setting though and what power limit

    In my case i gave up on vegas with this build , cant get it to detect my 56s and add straps , 570 microns and Hynix are another story

    Im getting 30mhs on stock bios with strap 3 and also seem to be able to lower core and mem voltage more than on my custom bioses.

    I have 5 570s all using 90 or less watts mesured at the wall !!

    i think i can go even lower , posibly 70-80 watts

  • rednoW
    Legendary
    *
    Offline Offline

    Activity: 1510
    Merit: 1003


    View Profile
    May 16, 2019, 08:43:51 AM
     #25345
    Quote from: Marvell2 on May 16, 2019, 08:22:48 AM
    Quote from: rednoW on May 16, 2019, 08:16:10 AM
    gtx1070 micron from 32.8 to 35 mhs - nice!

    wow thats impressive, what memory setting though and what power limit

    Those are old palit gamerock and jetstream gtx 1070 cards with micron memory.
    They don't like aggressive downvolt with Curve (MSI Afterburner) below 775mv.
    So I need to use classic power target and gpu overclock to gain more efficiency   ~1600+gpu clock, +550 mem, ~800mV, ~120watt according nvidia smi.
    settings are the same before was 32.8mhs now with claymore 35. Resulting gpu clock and voltage became lower automatically with high load ...

  • rednoW
    Legendary
    *
    Offline Offline

    Activity: 1510
    Merit: 1003


    View Profile
    May 16, 2019, 08:49:26 AM
     #25346
    Quote from: rednoW on May 15, 2019, 10:43:34 PM
    2 Claymore

    gtx1080tis are here, driver 425.31

    -strap 1 - low 40+ hashrate, but system is stable
    -strap 2 - need to apply only with std mem clock. Can raise mem clock after miner started and reach fantastic 56.5mhz but if miner closes then system crashes. Need to lower mem clock before exit.
    I have my P2 cuda states disabled by the way to prevent memory clock spikes between different P-states switches.

    -strap 3 - system crashes even with -502 mem clock.

    So, it looks promising but unusable. Get back to EthPill and 55mhs stable and no crashes when miner starts or exits

    2 Claymore.
    I think you should rework the way you do miner exit on gtx1080ti's with straps applied. I found a trick how to fix your timings and than run your miner without strap management.
    It keeps high speed of modded timing and doesn't crash system on exit.

  • davescream
    Newbie
    *
    Offline Offline

    Activity: 50
    Merit: 0


    View Profile
    May 16, 2019, 09:57:29 AM
     #25347
    14.0 - 14.2 versions do not detect NVIDIA GPUs on mixed rigs (AMD + NVIDIA)

  • rednoW
    Legendary
    *
    Offline Offline

    Activity: 1510
    Merit: 1003


    View Profile
    May 16, 2019, 10:02:10 AM
     #25348
    Quote from: davescream on May 16, 2019, 09:57:29 AM
    14.0 - 14.2 versions do not detect NVIDIA GPUs on mixed rigs (AMD + NVIDIA)
    Not true

  • davescream
    Newbie
    *
    Offline Offline

    Activity: 50
    Merit: 0


    View Profile
    May 16, 2019, 10:06:55 AM
     #25349
    Quote from: davescream on May 16, 2019, 09:57:29 AM
    14.0 - 14.2 versions do not detect NVIDIA GPUs on mixed rigs (AMD + NVIDIA)

    14.2 No NVIDIA cards in the list, NVML library will not be used.

    Code:
    2:55:53:410 10dc Check and remove old log files...
    12:55:53:410 10dc args: -logfile c:\local\FARM6\Miner.log -mode 1 -epool us1.ethermine.org:4444 -ewal 0x********************************.Farm6 -epsw ****** -mpsw ******* -r 1 -ethi 8 -etha 0 -ftime 5 -y 1 -altnum 1 -minspeed 140 -tt 73 -ttdcr 76 -ttli 81 -tstop 85 -fanmin 15 -asm 2
    12:55:53:410 10dc
    12:55:53:410 10dc ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH»
    12:55:53:410 10dc є              Claymore's Dual GPU Miner - v14.2 Beta            є
    12:55:53:410 10dc є              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             є
    12:55:53:410 10dc є                       Supercharged Edition                     є
    12:55:53:410 10dc ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj
    12:55:53:410 10dc
    12:55:53:410 10dc b715
    12:55:53:629 10dc ETH: 13 pools are specified
    12:55:53:629 10dc Main Ethereum pool is us1.ethermine.org:4444
    12:55:54:457 10dc OpenCL platform: NVIDIA CUDA
    12:55:54:457 10dc OpenCL platform: AMD Accelerated Parallel Processing
    12:55:54:457 10dc OpenCL initializing...

    12:55:54:457 10dc AMD Cards available: 3
    12:55:54:457 10dc GPU #1: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 32 compute units (pci bus 1:0:0)
    12:55:54:457 10dc GPU #1 recognized as Radeon RX 470/570
    12:55:54:457 10dc GPU #2: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 32 compute units (pci bus 2:0:0)
    12:55:54:457 10dc GPU #2 recognized as Radeon RX 470/570
    12:55:54:457 10dc GPU #3: Ellesmere (Radeon (TM) RX 480 Graphics), 4096 MB available, 36 compute units (pci bus 3:0:0)
    12:55:54:457 10dc GPU #3 recognized as Radeon RX 480/580
    12:55:54:457 10dc POOL/SOLO version
    12:55:54:457 10dc Platform: Windows
    12:55:54:535 10dc start building OpenCL program for GPU 1...
    12:55:55:035 10dc done
    12:55:55:254 10dc start building OpenCL program for GPU 2...
    12:55:55:739 10dc done
    12:55:55:957 10dc start building OpenCL program for GPU 3...
    12:55:56:442 10dc done
    12:55:56:707 10dc GPU #1: algorithm ASM 2
    12:55:56:754 10dc GPU #2: algorithm ASM 2
    12:55:56:817 10dc GPU #3: algorithm ASM 2
    12:55:56:832 10dc cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
    12:55:56:832 10dc No NVIDIA CUDA GPUs detected.
    12:55:56:832 10dc Total cards: 3
    12:55:56:832 10dc
    Please consider using "-strap" option to increase mining speed, check Readme for details.

    12:55:58:864 10dc
    You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.

    12:55:59:879 10dc No NVIDIA cards in the list, NVML library will not be used.
    12:55:59:879 10dc All AMD cards use Compute Mode already
    12:55:59:879 10dc CrossFire is disabled already
    12:56:00:926 10dc SSL: Imported 31 certificates from local storage

    12.0 - ok  12:52:51:975   1248   NVIDIA Cards available: 2

    Code:
    12:52:47:663 1248 Check and remove old log files...
    12:52:47:663 1248 args: -logfile c:\local\FARM6\Miner.log -mode 1 -epool us1.ethermine.org:4444 -ewal 0x*******.Farm6 -epsw ********** -mpsw ******** -r 1 -ethi 8 -etha 0 -ftime 5 -y 1 -altnum 1 -minspeed 140 -tt 73 -ttdcr 76 -ttli 81 -tstop 85 -fanmin 15 -asm 2
    12:52:47:663 1248
    12:52:47:663 1248 ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH»
    12:52:47:663 1248 є                Claymore's Dual GPU Miner - v12.0               є
    12:52:47:663 1248 є              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             є
    12:52:47:663 1248 ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj
    12:52:47:663 1248
    12:52:47:663 1248 b615
    12:52:47:928 1248 ETH: 13 pools are specified
    12:52:47:928 1248 Main Ethereum pool is us1.ethermine.org:4444
    12:52:48:616 1248 OpenCL platform: NVIDIA CUDA
    12:52:48:616 1248 OpenCL platform: AMD Accelerated Parallel Processing
    12:52:48:616 1248 OpenCL initializing...

    12:52:48:616 1248 AMD Cards available: 3
    12:52:48:616 1248 GPU #1: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 32 compute units (pci bus 1:0:0)
    12:52:48:616 1248 GPU #1 recognized as Radeon RX 470/570
    12:52:48:616 1248 GPU #2: Ellesmere (Radeon (TM) RX 470 Graphics), 4096 MB available, 32 compute units (pci bus 2:0:0)
    12:52:48:616 1248 GPU #2 recognized as Radeon RX 470/570
    12:52:48:616 1248 GPU #3: Ellesmere (Radeon (TM) RX 480 Graphics), 4096 MB available, 36 compute units (pci bus 3:0:0)
    12:52:48:616 1248 GPU #3 recognized as Radeon RX 480/580
    12:52:48:616 1248 POOL/SOLO version
    12:52:48:616 1248 Platform: Windows
    12:52:48:756 1248 start building OpenCL program for GPU 1...
    12:52:49:241 1248 done
    12:52:49:475 1248 start building OpenCL program for GPU 2...
    12:52:49:959 1248 done
    12:52:50:178 1248 start building OpenCL program for GPU 3...
    12:52:50:694 1248 done
    12:52:50:959 1248 GPU #1: algorithm ASM 2
    12:52:51:022 1248 GPU #2: algorithm ASM 2
    12:52:51:084 1248 GPU #3: algorithm ASM 2
    12:52:51:975 1248 CUDA initializing...

    12:52:51:975 1248 NVIDIA Cards available: 2
    12:52:51:975 1248 CUDA Driver Version/Runtime Version: 8.0/8.0
    12:52:52:053 1248 GPU #4: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 5:0:0)
    12:52:52:069 1248 GPU #5: GeForce GTX 1070, 8192 MB available, 15 compute units, capability: 6.1  (pci bus 7:0:0)
    12:52:52:069 1248 Total cards: 5
    12:52:53:303 1248
    You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.

    12:52:54:381 1248 NVML version: 8.382.53
    12:52:54:413 1248 All AMD cards use Compute Mode already
    12:52:54:413 1248 CrossFire is disabled already
    12:52:56:006 1248 SSL: Imported 31 certificates from local storage

  • Claymore (OP)
    Donator
    Legendary
    *
    Offline Offline

    Activity: 1610
    Merit: 1325

    Miners developer


    View Profile
    May 16, 2019, 10:09:38 AM
     #25350
    Quote from: rednoW on May 16, 2019, 08:49:26 AM
    2 Claymore.
    I think you should rework the way you do miner exit on gtx1080ti's with straps applied. I found a trick how to fix your timings and than run your miner without strap management.
    It keeps high speed of modded timing and doesn't crash system on exit.

    Ok I will restore settings at exit.

    Quote from: davescream on May 16, 2019, 09:57:29 AM
    14.0 - 14.2 versions do not detect NVIDIA GPUs on mixed rigs (AMD + NVIDIA)

    Install latest drivers or use files from "cuda8" folder (redownload v14.2 if you don't have this folder).
    Please read Readme and FAQ in the first post of this thread before asking any questions, probably the answer is already there.
    List of my miners: https://bt.irlbtc.com/view/3019607

  • dwu
    Newbie
    *
    Offline Offline

    Activity: 6
    Merit: 0


    View Profile
    May 16, 2019, 11:43:39 AM
     #25351
    I read several pages and I still don't know if I should switch to his straps. I made a custom BIOS a year ago and I have around 29-30MH (Reported: mostly 30-31.5) for my RX480/580 4GB cards.
    Probably my timings are not the most stable and memory errors are occurring on some cards too (I still do not fully know if it is actually bad or not), because I tried to push it to the limit. Sometimes the miner restarts once a day.

    What do you suggest?
    - Should I flash the original BIOS back ...
    - ... and use Claymore/Eliovp's Mem tweak?
    - ... or can I still use my modded BIOS with Claymore?
    - Do i still need to apply the pixel-clock-patcher after installing a new AMD driver?


    Thanks for any help!

  • rednoW
    Legendary
    *
    Offline Offline

    Activity: 1510
    Merit: 1003


    View Profile
    May 16, 2019, 11:51:07 AM
     #25352
    2 Claymore

    One more thing. Think you have a bug with NVIDIA timings. When I  try to apply strap 1 to one card and strap 2 to another. But they both have the strap 2 as result.

  • trustfarm
    Newbie
    *
    Offline Offline

    Activity: 13
    Merit: 0


    View Profile
    May 16, 2019, 11:58:19 AM
     #25353
    Can you support TethashV1 (upgrade ethash)

    1. Project description (pools and rteo parity modified node)
      https://github.com/tao-foundation/rteo


    here's algorithm EIP-1485
    1-1.  https://github.com/ethereum/EIPs/blob/master/EIPS/eip-1485.md#4-real-implementation-for-fnv1a

    1-2.  running pool lists
       -  1) teopool.tao.foundation
       -  2) teopool2.tao.foundation
       -  3) pool1.tao.foundation

    1-3.  efficiency of algorithm compared than ethash
       - 1) more randomizing on MIX parts.
       - 2) simple more multiplication loops makes less hashrates 5~10% , compared than ethash
       - 3) simple more multiplication loops makes hard to overclock for the meet fpga asic timing meets.
       - 4) more fair speed on cpu gpu fpga asic .


    It has upgrade ethash MIX parts, for prevent ETH-ASIC .

    deprecated fnv0 upgrade to fnv1a

    applied source patched things here.

    2. teominer fork of  ethminer
    https://github.com/tao-foundation/teominer

    2-1. reference opencl code :  https://github.com/tao-foundation/teominer/blob/master/libethash-cl/kernels/cl/ethash.cl
    2-2. reference cuda code :  https://github.com/tao-foundation/teominer/blob/master/libethash-cuda/fnv.cuh

    2-3. patched ethash cpu code : https://github.com/tao-foundation/tethashv1
     
    If you are interested on this, you can add easily, because small modification of ethash.
    And, please let me know email me : cpplover@trustfarm.net

    Thanks.

  • zloyneo
    Newbie
    *
    Offline Offline

    Activity: 40
    Merit: 0


    View Profile
    May 16, 2019, 12:11:14 PM
     #25354
    Quote from: Claymore on May 16, 2019, 10:09:38 AM
    Quote from: rednoW on May 16, 2019, 08:49:26 AM
    2 Claymore.
    I think you should rework the way you do miner exit on gtx1080ti's with straps applied. I found a trick how to fix your timings and than run your miner without strap management.
    It keeps high speed of modded timing and doesn't crash system on exit.

    Ok I will restore settings at exit.

    Quote from: davescream on May 16, 2019, 09:57:29 AM
    14.0 - 14.2 versions do not detect NVIDIA GPUs on mixed rigs (AMD + NVIDIA)

    Install latest drivers or use files from "cuda8" folder (redownload v14.2 if you don't have this folder).

    Good afternoon. Thank you for your new version. Will new features be available in the Linux version? strap ?

  • prostor
    Newbie
    *
    Offline Offline

    Activity: 39
    Merit: 0


    View Profile WWW
    May 16, 2019, 02:15:38 PM
     #25355
    2 Claymore.
    is it planned to add the Ubqhash algorithm for the UBQ coin in your miner?

  • ustcstone
    Newbie
    *
    Offline Offline

    Activity: 49
    Merit: 0


    View Profile
    May 16, 2019, 02:52:19 PM
     #25356
    any update about linux version?the windows version works great but my rigs are almost linux.....

  • UnclWish
    Sr. Member
    ****
    Offline Offline

    Activity: 1484
    Merit: 253


    View Profile
    May 16, 2019, 04:21:25 PM
     #25357
    Quote from: ustcstone on May 16, 2019, 02:52:19 PM
    any update about linux version?the windows version works great but my rigs are almost linux.....
    Just read last 2-3 pages of the thread and you'll find answer.

  • Claymore (OP)
    Donator
    Legendary
    *
    Offline Offline

    Activity: 1610
    Merit: 1325

    Miners developer


    View Profile
    May 16, 2019, 04:37:24 PM
     #25358
    v14.3 Beta:

    - fixed BSOD issue with Vega cards.
    - improved handling memory timings for Nvidia.
    - "strap" option for Nvidia cards: added "-strap 4"..."-strap 6" options, they have less intensity than straps #1..3 so you can try to use them if you cannot use even "-strap 1" option.
    Please read Readme and FAQ in the first post of this thread before asking any questions, probably the answer is already there.
    List of my miners: https://bt.irlbtc.com/view/3019607

  • Elange
    Newbie
    *
    Offline Offline

    Activity: 73
    Merit: 0


    View Profile
    May 16, 2019, 05:23:42 PM
     #25359
    Hi,

    is the magic strap function Windows only? Won't work in Linux?
    thanks

  • clixo
    Newbie
    *
    Offline Offline

    Activity: 4
    Merit: 0


    View Profile
    May 16, 2019, 05:27:17 PM
     #25360
    i am getting allways this error (Radeon RX 580 Series): ( no matter witch strap i use )

    GPU #0, failed to init memory timings tuning for this hardware, error 1004

    What can i do to fix it ? thanks.


    AMD Cards available: 1
    GPU #0: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus -126:0:0)
    GPU #0 recognized as Radeon RX 480/580
    POOL/SOLO version
    GPU #0: algorithm ASM 1
    No NVIDIA CUDA GPUs detected.
    Total cards: 1
    Wrong driver version, trying to uninstall it and install correct version...
    A operação foi concluída com êxito.
    Driver uninstalled successfully.
    Driver is not installed! Trying to install it...
    A operação foi concluída com êxito.
    Driver installed successfully.
    GPU #0, failed to init memory timings tuning for this hardware, error 1004
    Pages: « 1 ... 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 [1268] 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 ... 1409 »
      Print  
Page 1267
Viewing Page: 1268

IRLBTC™ © 2025 IRLBTC.com