<<  >> (p.681)
    Author Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)  (Read 3839403 times)

    • FlensGold
    Legendary
    *
    Offline Offline

    Activity: 1405
    Merit: 1001


    View Profile
    May 01, 2017, 10:15:59 AM
     #13601
    Hello,
    I have a problem with my rig(s), maybe someone has an idea. I am using Awesome Miner controlling Claymore Miner. This problem is not awesome miner related since I do get the same error while using claymore without AM.
    I do have some Rigs running Windows 10 and I do access them via Teamviewer. Sometimes the rigs (randomly from my point of view) stop hashing and when I connect to it it looks like this:


    Since this happens quite often I had the chance to see what happens before: For some reason Windows 10 shows an error claiming that Windows blocks access to (I think it was) Radeon settings which causes Claymore Miner to stop (or maybe stop GPU working so the watchdog restarts Claymore).
    I did try different driver versions as of right now I am using the recommended 16.2.2.

    In those cases I have to reboot the rig, but unfortunately sometimes not all GPUs start hashing after start of CM. CM states that the GPU hangs in OpenCL call and watchdog restarts CM which can also lead to the screen above.
    I do have this problem on all my rigs, so I would appreciate any idea that might help.
    Thank you!

  • galaxy5user
    Newbie
    *
    Offline Offline

    Activity: 55
    Merit: 0


    View Profile
    May 01, 2017, 10:22:57 AM
     #13602
    How to use an external watchdog? I mean, for ex., sgminer has an API which allows to query the status of the miner and reboot the PC if necessary. How to do the same with Claymore's (check it's status)?

  • haxiboy
    Newbie
    *
    Offline Offline

    Activity: 36
    Merit: 0


    View Profile WWW
    May 01, 2017, 12:59:07 PM
     #13603
    Claymore have the same jsonrpc protocol for remote monitoring/controlling, default port is 3333.

    You can check it with EthMan, or you can write your own as jsonrpc is well documented. (as i did).
    After my miner monitor will be stable i'll release it with a minersit hardware based that can monitor/restart your pc like simple rig resetter but with more features.

  • MinermanNC
    Legendary
    *
    Offline Offline

    Activity: 2212
    Merit: 1000



    View Profile
    May 01, 2017, 01:15:32 PM
     #13604
    Quote from: golden0707 on May 01, 2017, 10:06:56 AM
    Quote from: golden0707 on May 01, 2017, 04:18:12 AM
    Hi friends!

    For those who has 290s. Im getting 360 h/s. But the card runs at 80 degree celsius. 76% fan speed. Is it normal for that card? I have several 280x. And they run at less then 70°.


    No one knows ?

    I'm getting 310 h/s on 3 x 290x and 383 h/s on a 390

    Temps I have capped not to exceed 83. I am fighting the heat of the south now in my garage. But have had higher hashes during the winter. I don't want to burn em up lol

    So I would say your h/s vs. temps is very good and about right  Wink

    and yes on the 280x's I run 11 of those and the 4 x 280x rigs average 1.1 kh/s and run cool around 72. Great cards for ZEC  Smiley
    *BTC: 1DiR25SPo84sThzTATr27EZEQZLt6hv6tG

  • Ahead
    Member
    **
    Offline Offline

    Activity: 74
    Merit: 10

    IT Solutions Architect


    View Profile
    May 01, 2017, 01:17:29 PM
     #13605
    Hi,

    I'm having an issue with my Gigabyte R9 280x (windforce OC).
    The card hashrate is at 300+-, (core clock at 1100) but after a while, for no reason the hashrate drops at 50% (and I have noticed that the core clock drops to 501).
    I have to reboot the system or disable/enable the card in device manager to hash at 300 again (for a while, then it drops again at 150 again)

    Anyone else having the same issue or any idea what is causing this?  Huh

    Thank you in advance!
    ♦  Just-Dice.com  ♦   ♦  1% House Edge Dice Game  ♦   ♦  Play Now  ♦

  • MinermanNC
    Legendary
    *
    Offline Offline

    Activity: 2212
    Merit: 1000



    View Profile
    May 01, 2017, 01:18:41 PM
     #13606
    Quote from: Ahead on May 01, 2017, 01:17:29 PM
    Hi,

    I'm having an issue with my Gigabyte R9 280x (windforce OC).
    The card hashrate is at 300+-, (core clock at 1100) but after a while, for no reason the hashrate drops at 50% (and I have noticed that the core clock drops to 501).
    I have do reboot the system or disable/enable the card in device manager to hash at 300 again (for a while, after it drops at 150 again)

    Anyone else having the same issue or any idea what is causing this?  Huh

    Thank you in advance!
    are you running just the one card?

    What fan temp control software are you running?

    Sounds like it getting hot and throttling down the clock
    *BTC: 1DiR25SPo84sThzTATr27EZEQZLt6hv6tG

  • MinermanNC
    Legendary
    *
    Offline Offline

    Activity: 2212
    Merit: 1000



    View Profile
    May 01, 2017, 01:32:08 PM
     #13607
    Anyone have any results yet for the RX 580 - 570 cards?

    I noticed they are keeping prices up on the 480 line  Roll Eyes

    Please post

    THX
    *BTC: 1DiR25SPo84sThzTATr27EZEQZLt6hv6tG

  • Ahead
    Member
    **
    Offline Offline

    Activity: 74
    Merit: 10

    IT Solutions Architect


    View Profile
    May 01, 2017, 01:33:23 PM
     #13608
    Quote from: MinermanNC on May 01, 2017, 01:18:41 PM
    Quote from: Ahead on May 01, 2017, 01:17:29 PM
    Hi,

    I'm having an issue with my Gigabyte R9 280x (windforce OC).
    The card hashrate is at 300+-, (core clock at 1100) but after a while, for no reason the hashrate drops at 50% (and I have noticed that the core clock drops to 501).
    I have do reboot the system or disable/enable the card in device manager to hash at 300 again (for a while, after it drops at 150 again)

    Anyone else having the same issue or any idea what is causing this?  Huh

    Thank you in advance!
    are you running just the one card?

    What fan temp control software are you running?

    Sounds like it getting hot and throttling down the clock

    Hi,

    Thank you for the reply!
    yes just one card in the pc!
    I use afterburner and fan speed is set at 100% (temp at 85c-92c)
    ♦  Just-Dice.com  ♦   ♦  1% House Edge Dice Game  ♦   ♦  Play Now  ♦

  • Blisk
    Sr. Member
    ****
    Offline Offline

    Activity: 412
    Merit: 250


    View Profile
    May 01, 2017, 01:46:45 PM
     #13609
    I have tried this miner but always get
    GPU #0 returned incorrect data!
    Free coins for registering

  • scryptr
    Legendary
    *
    Offline Offline

    Activity: 1798
    Merit: 1028



    View Profile WWW
    May 01, 2017, 01:48:26 PM
     #13610
    Quote from: Ahead on May 01, 2017, 01:33:23 PM
    Quote from: MinermanNC on May 01, 2017, 01:18:41 PM
    Quote from: Ahead on May 01, 2017, 01:17:29 PM
    Hi,

    I'm having an issue with my Gigabyte R9 280x (windforce OC).
    The card hashrate is at 300+-, (core clock at 1100) but after a while, for no reason the hashrate drops at 50% (and I have noticed that the core clock drops to 501).
    I have do reboot the system or disable/enable the card in device manager to hash at 300 again (for a while, after it drops at 150 again)

    Anyone else having the same issue or any idea what is causing this?  Huh

    Thank you in advance!
    are you running just the one card?

    What fan temp control software are you running?

    Sounds like it getting hot and throttling down the clock

    Hi,

    Thank you for the reply!
    yes just one card in the pc!
    I use afterburner and fan speed is set at 100% (temp at 85c-92c)



    HEAT THROTTLING--

    The card will throttle at those temperatures.  Temperatures over 85 deg C are too high, and can wear out a card too soon.  Temperatures over 90 deg C can damage even the best cards.       --scryptr
    SCRYPTR'S NOTEBOOK: https://bt.irlbtc.com/view/5035515.msg46035530#msg46035530
    GITHUB: "github.com/scryptr"  MERIT is appreciated, also.  Thanks!

  • MinermanNC
    Legendary
    *
    Offline Offline

    Activity: 2212
    Merit: 1000



    View Profile
    May 01, 2017, 01:54:21 PM
     #13611
    Quote from: scryptr on May 01, 2017, 01:48:26 PM
    Quote from: Ahead on May 01, 2017, 01:33:23 PM
    Quote from: MinermanNC on May 01, 2017, 01:18:41 PM
    Quote from: Ahead on May 01, 2017, 01:17:29 PM
    Hi,

    I'm having an issue with my Gigabyte R9 280x (windforce OC).
    The card hashrate is at 300+-, (core clock at 1100) but after a while, for no reason the hashrate drops at 50% (and I have noticed that the core clock drops to 501).
    I have do reboot the system or disable/enable the card in device manager to hash at 300 again (for a while, after it drops at 150 again)

    Anyone else having the same issue or any idea what is causing this?  Huh

    Thank you in advance!
    are you running just the one card?

    What fan temp control software are you running?

    Sounds like it getting hot and throttling down the clock

    Hi,

    Thank you for the reply!
    yes just one card in the pc!
    I use afterburner and fan speed is set at 100% (temp at 85c-92c)



    HEAT THROTTLING--

    The card will throttle at those temperatures.  Temperatures over 85 deg C are too high, and can wear out a card too soon.  Temperatures over 90 deg C can damage even the best cards.       --scryptr
    Yes, check your air flow if in a case or pull the side panel off the case put a small fan pushing outside air directly into the GPU maybe help pushing the air back out of case.
    Also, set your fan speed to about 75-80 anymore than that seems useless and I feel it actually runs hotter at 100% make sure cards fan blades are spotless and the radiator fins on heat block are clean.  Smiley
    *BTC: 1DiR25SPo84sThzTATr27EZEQZLt6hv6tG

  • MinermanNC
    Legendary
    *
    Offline Offline

    Activity: 2212
    Merit: 1000



    View Profile
    May 01, 2017, 02:00:59 PM
     #13612
    Quote from: Blisk on May 01, 2017, 01:46:45 PM
    I have tried this miner but always get
    GPU #0 returned incorrect data!

    What claymore version are you using and what card?

    Are you hard wired internet or wireless?
    *BTC: 1DiR25SPo84sThzTATr27EZEQZLt6hv6tG

  • Ahead
    Member
    **
    Offline Offline

    Activity: 74
    Merit: 10

    IT Solutions Architect


    View Profile
    May 01, 2017, 02:44:11 PM
     #13613
    Quote from: MinermanNC on May 01, 2017, 01:54:21 PM
    Quote from: scryptr on May 01, 2017, 01:48:26 PM
    Quote from: Ahead on May 01, 2017, 01:33:23 PM
    Quote from: MinermanNC on May 01, 2017, 01:18:41 PM
    Quote from: Ahead on May 01, 2017, 01:17:29 PM
    Hi,

    I'm having an issue with my Gigabyte R9 280x (windforce OC).
    The card hashrate is at 300+-, (core clock at 1100) but after a while, for no reason the hashrate drops at 50% (and I have noticed that the core clock drops to 501).
    I have do reboot the system or disable/enable the card in device manager to hash at 300 again (for a while, after it drops at 150 again)

    Anyone else having the same issue or any idea what is causing this?  Huh

    Thank you in advance!
    are you running just the one card?

    What fan temp control software are you running?

    Sounds like it getting hot and throttling down the clock

    Thank you for your replies.

    I'll have a look at the temperature issues, and hope this will solve my issue!
    Smiley
    Hi,

    Thank you for the reply!
    yes just one card in the pc!
    I use afterburner and fan speed is set at 100% (temp at 85c-92c)



    HEAT THROTTLING--

    The card will throttle at those temperatures.  Temperatures over 85 deg C are too high, and can wear out a card too soon.  Temperatures over 90 deg C can damage even the best cards.       --scryptr
    Yes, check your air flow if in a case or pull the side panel off the case put a small fan pushing outside air directly into the GPU maybe help pushing the air back out of case.
    Also, set your fan speed to about 75-80 anymore than that seems useless and I feel it actually runs hotter at 100% make sure cards fan blades are spotless and the radiator fins on heat block are clean.  Smiley

    Thank you!
    I'll have a look at the temperature issue, and hope that will solve my problem
    ♦  Just-Dice.com  ♦   ♦  1% House Edge Dice Game  ♦   ♦  Play Now  ♦

  • igorsantos
    Member
    **
    Offline Offline

    Activity: 179
    Merit: 10


    View Profile
    May 01, 2017, 02:51:56 PM
     #13614
    Quote from: MinermanNC on May 01, 2017, 01:15:32 PM
    Quote from: golden0707 on May 01, 2017, 10:06:56 AM
    Quote from: golden0707 on May 01, 2017, 04:18:12 AM
    Hi friends!

    For those who has 290s. Im getting 360 h/s. But the card runs at 80 degree celsius. 76% fan speed. Is it normal for that card? I have several 280x. And they run at less then 70°.


    No one knows ?

    I'm getting 310 h/s on 3 x 290x and 383 h/s on a 390

    Temps I have capped not to exceed 83. I am fighting the heat of the south now in my garage. But have had higher hashes during the winter. I don't want to burn em up lol

    So I would say your h/s vs. temps is very good and about right  Wink

    and yes on the 280x's I run 11 of those and the 4 x 280x rigs average 1.1 kh/s and run cool around 72. Great cards for ZEC  Smiley

    Between 75 and 85 depending on the climate conditions of the region and the cooling system used.

  • nekkidtruth
    Newbie
    *
    Offline Offline

    Activity: 1
    Merit: 0


    View Profile
    May 01, 2017, 03:06:03 PM
     #13615
    Quote from: MinermanNC on May 01, 2017, 01:32:08 PM
    Anyone have any results yet for the RX 580 - 570 cards?

    I noticed they are keeping prices up on the 480 line  Roll Eyes

    Please post

    THX

    I recently picked up 2 Gigabyte Gaming RX 570's. They're in 2 different machines. I haven't done anything special to them yet as I just wanted to get them in stock. Here's my results thus far:

    GPU0 t=72C fan=30%
    ZEC - Total Speed: 280.034 H/s
    ZEC: GPU0 280.034 H/s

    It's the same on both machines. Using Claymore 12.4.

  • golden0707
    Full Member
    ***
    Offline Offline

    Activity: 189
    Merit: 100


    View Profile
    May 01, 2017, 03:40:50 PM
     #13616
    Quote from: MinermanNC on May 01, 2017, 01:15:32 PM
    Quote from: golden0707 on May 01, 2017, 10:06:56 AM
    Quote from: golden0707 on May 01, 2017, 04:18:12 AM
    Hi friends!

    For those who has 290s. Im getting 360 h/s. But the card runs at 80 degree celsius. 76% fan speed. Is it normal for that card? I have several 280x. And they run at less then 70°.


    No one knows ?

    I'm getting 310 h/s on 3 x 290x and 383 h/s on a 390

    Temps I have capped not to exceed 83. I am fighting the heat of the south now in my garage. But have had higher hashes during the winter. I don't want to burn em up lol

    So I would say your h/s vs. temps is very good and about right  Wink

    and yes on the 280x's I run 11 of those and the 4 x 280x rigs average 1.1 kh/s and run cool around 72. Great cards for ZEC  Smiley

    Thanks for the info. I just get this card for the first time. All my previous gpu,s were 280xs. Now im not so worry Wink

  • Xardas2014
    Hero Member
    *****
    Offline Offline

    Activity: 635
    Merit: 500


    View Profile
    May 01, 2017, 04:39:19 PM
     #13617
    Quote from: golden0707 on May 01, 2017, 03:40:50 PM
    Quote from: MinermanNC on May 01, 2017, 01:15:32 PM
    Quote from: golden0707 on May 01, 2017, 10:06:56 AM
    Quote from: golden0707 on May 01, 2017, 04:18:12 AM
    Hi friends!

    For those who has 290s. Im getting 360 h/s. But the card runs at 80 degree celsius. 76% fan speed. Is it normal for that card? I have several 280x. And they run at less then 70°.


    No one knows ?

    I'm getting 310 h/s on 3 x 290x and 383 h/s on a 390

    Temps I have capped not to exceed 83. I am fighting the heat of the south now in my garage. But have had higher hashes during the winter. I don't want to burn em up lol

    So I would say your h/s vs. temps is very good and about right  Wink

    and yes on the 280x's I run 11 of those and the 4 x 280x rigs average 1.1 kh/s and run cool around 72. Great cards for ZEC  Smiley

    Thanks for the info. I just get this card for the first time. All my previous gpu,s were 280xs. Now im not so worry Wink
    It might be helpful to mention that air volume is more effective than air temp. A large volume of 100F air will cool cards better than a small volume of 50F air. Junkyard air movers/fans from central units will cool far more effectively than an AC unit blowing on a rig. Tried and proved during ASIC scrypt mining days. Wink

  • Trasnadian
    Newbie
    *
    Offline Offline

    Activity: 38
    Merit: 0


    View Profile
    May 01, 2017, 05:07:06 PM
     #13618
    I have a rig with 5 7970.
    It works well in the last few months with various version of Claymore miners.

    At present, after the miner is started and run for some time it shows
    "Cannot get Overdrive capabilities for adapter 0 " and then stopped automatically.

    How to solve this problem.

    Code:
    0:33:07:438 ed8 ZEC: Stratum - connecting to 'cn1-zcash.flypool.org' <120.55.168.103> port 3443 (SSL/TLS)
    00:33:07:488 ed8 cert subject:OU=Domain Control Validated/OU=PositiveSSL Wildcard/CN=*.flypool.org
    00:33:07:498 ed8 cert issuer:C=GB/ST=Greater Manchester/L=Salford/O=COMODO CA Limited/CN=COMODO RSA Domain Validation Secure Server CA
    00:33:07:498 ed8 SSL/TLS encryption is enabled
    00:33:07:498 ed8 send: {"id": 1, "method": "mining.subscribe", "params": ["equihashminer", null, "cn1-zcash.flypool.org", "3443"]}

    00:33:07:508 ed8 send: {"id": 2, "method": "mining.authorize", "params": ["Zaddress.rig2","x"]}

    00:33:07:508 ed8 send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}

    00:33:07:508 ed8 ZEC: Stratum - Connected (cn1-zcash.flypool.org:3443) (SSL/TLS)
    00:33:07:548 ed8 got 62 bytes
    00:33:07:548 ed8 buf: {"id":1,"result":["31b1b848e3", "31b1b848e3"], "error": null}

    00:33:07:548 ed8 parse packet: 58
    00:33:07:548 ed8 new buf size: 0
    00:33:07:558 ed8 got 38 bytes
    00:33:07:558 ed8 buf: {"id":2,"result":true, "error": null}

    00:33:07:558 ed8 parse packet: 35
    00:33:07:558 ed8 ZEC: Authorized
    00:33:07:568 ed8 new buf size: 0
    00:33:07:568 ed8 got 119 bytes
    00:33:07:568 ed8 buf: {"id":null,"method":"mining.set_target","params":["00083126e978d4fdf3b645a1cac083126e978d4fdf3b645a1cac083126e978d4"]}

    00:33:07:568 ed8 parse packet: 118
    00:33:07:578 ed8 Pool sets new share target: 0x00083126 (diff: 8000H)
    00:33:07:578 ed8 new buf size: 0
    00:33:08:408 87c Cannot get Overdrive capabilities for adapter 0
    00:33:08:558 ed8 got 61 bytes
    00:33:08:558 ed8 buf: {"id":2,"result": null,"error": [20, "Work not yet ready!"]}

    00:33:08:558 ed8 parse packet: 54
    00:33:08:568 ed8 ZEC: Authorization failed
    : {"id":2,"result":null,"error":[20,"Worknotyetready!"]}
    00:33:08:568 ed8 buf was cleared
    00:33:09:988 6b0 recv: 51
    00:33:09:988 6b0 srv pck: 50
    00:33:10:008 6b0 Cannot get Overdrive capabilities for adapter 0
    00:33:10:038 6b0 srv bs: 0
    00:33:10:038 6b0 sent: 182
    00:33:11:458 87c Cannot get Overdrive capabilities for adapter 0
    00:33:14:508 87c Cannot get Overdrive capabilities for adapter 0
    00:33:15:008 69c recv: 51
    00:33:15:008 69c srv pck: 50
    00:33:15:028 69c Cannot get Overdrive capabilities for adapter 0
    00:33:15:058 69c srv bs: 0
    00:33:15:058 69c sent: 170
    00:33:17:558 87c Cannot get Overdrive capabilities for adapter 0
    00:33:20:038 bc0 recv: 51
    00:33:20:038 bc0 srv pck: 50
    00:33:20:048 bc0 Cannot get Overdrive capabilities for adapter 0
    00:33:20:078 bc0 srv bs: 0
    00:33:20:088 bc0 sent: 168
    00:33:20:608 87c Cannot get Overdrive capabilities for adapter 0
    00:33:23:658 87c Cannot get Overdrive capabilities for adapter 0
    00:33:25:068 728 recv: 51
    00:33:25:068 728 srv pck: 50
    00:33:25:088 728 Cannot get Overdrive capabilities for adapter 0
    00:33:25:118 728 srv bs: 0
    00:33:25:118 728 sent: 168
    00:33:26:708 87c Cannot get Overdrive capabilities for adapter 0

  • galaxy5user
    Newbie
    *
    Offline Offline

    Activity: 55
    Merit: 0


    View Profile
    May 01, 2017, 06:10:08 PM
     #13619
    Quote from: haxiboy on May 01, 2017, 12:59:07 PM
    Claymore have the same jsonrpc protocol for remote monitoring/controlling, default port is 3333.

    You can check it with EthMan, or you can write your own as jsonrpc is well documented. (as i did).
    After my miner monitor will be stable i'll release it with a minersit hardware based that can monitor/restart your pc like simple rig resetter but with more features.
    What do you mean "the same"? For ex., I've tried this command and it returned nothing:
    Code:
    curl -H "Content-Type: application/json" --data {\"command\": \"version\"} -v http://127.0.0.1:3333
    Yeah, it responds to the GET request with a kind of HTTP-formatted logs. But it is not the same as the status.
    EthMan is MustDie-only.

  • golden0707
    Full Member
    ***
    Offline Offline

    Activity: 189
    Merit: 100


    View Profile
    May 01, 2017, 07:21:15 PM
     #13620
    Quote from: Xardas2014 on May 01, 2017, 04:39:19 PM
    Quote from: golden0707 on May 01, 2017, 03:40:50 PM
    Quote from: MinermanNC on May 01, 2017, 01:15:32 PM
    Quote from: golden0707 on May 01, 2017, 10:06:56 AM
    Quote from: golden0707 on May 01, 2017, 04:18:12 AM
    Hi friends!

    For those who has 290s. Im getting 360 h/s. But the card runs at 80 degree celsius. 76% fan speed. Is it normal for that card? I have several 280x. And they run at less then 70°.


    No one knows ?

    I'm getting 310 h/s on 3 x 290x and 383 h/s on a 390

    Temps I have capped not to exceed 83. I am fighting the heat of the south now in my garage. But have had higher hashes during the winter. I don't want to burn em up lol

    So I would say your h/s vs. temps is very good and about right  Wink

    and yes on the 280x's I run 11 of those and the 4 x 280x rigs average 1.1 kh/s and run cool around 72. Great cards for ZEC  Smiley

    Thanks for the info. I just get this card for the first time. All my previous gpu,s were 280xs. Now im not so worry Wink
    It might be helpful to mention that air volume is more effective than air temp. A large volume of 100F air will cool cards better than a small volume of 50F air. Junkyard air movers/fans from central units will cool far more effectively than an AC unit blowing on a rig. Tried and proved during ASIC scrypt mining days. Wink

    It certainly be helpful. Really appreciated your info.
    Pages: « 1 ... 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 [681] 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 ... 759 »
      Print  
Page 680
Viewing Page: 681

IRLBTC™ © 2025 IRLBTC.com