<<  >> (p.101)
    Author Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)  (Read 3839402 times)

    • bardacuda
    Sr. Member
    ****
    Offline Offline

    Activity: 430
    Merit: 254


    View Profile
    November 10, 2016, 03:59:45 AM
     #2001
    Quote from: elektrofreak on November 10, 2016, 02:57:08 AM
    Quote from: bardacuda on November 10, 2016, 02:26:16 AM
    Quote from: elektrofreak on November 10, 2016, 02:12:35 AM
    Does anyone here know how to get past the opencl error 0 #101 issues? I'm running a pair of older 6970s, and with every version so far I've had these errors pop up, one for each gpu. Then the miner proceeds to sit there and do nothing at all, or BSOD my system.

    Sure, you just need to solder some more RAM chips onto your card and you're good to go! Seriously though, it's time for a new card.

    http://www.anandtech.com/show/4455/amds-graphics-core-next-preview-amd-architects-for-compute/3

    Wow that was some really easy shit to say just now, yet that info was so very hard to find. So to be clear: ONLY GCN cards are supported. Got it! Thanks.. Cryptonight, I'm comin home baby :-D

    Actually, he says it right in the OP and in the readme Cheesy

    Quote from: Claymore on November 04, 2016, 03:47:34 PM
    ...
    This version is for recent AMD videocards only: 7xxx, 2xx, 3xx and 4xx, 2GB or more.
    ...

    That said; I did see a post on the zcash forum I think where someone managed to get a 6990 working, but it was only giving him 2Sol/s, per chip. So it is possible to get 1GB cards working, but not worth it on anything pre-GCN. There is hope for 1GB 7850s (and maybe even 77XXs), but again...not supported.

  • gennadiv
    Full Member
    ***
    Offline Offline

    Activity: 139
    Merit: 100


    View Profile
    November 10, 2016, 04:02:06 AM
     #2002
    3.1 paбoтaeт лyчшe  ZEC: 11/10/16-10:58:46 - New job from zec.coinmine.pl:7007
    ZEC - Total Speed: 108.613 H/s, Total Shares: 605, Rejected: 0, Time: 01:5
    ZEC: GPU0 34.012 H/s, GPU1 37.892 H/s, GPU2 36.709 H/s
    в 3.0 был cбoй c пoдключeниeм
    r9 380

  • CoinPro69
    Newbie
    *
    Offline Offline

    Activity: 58
    Merit: 0


    View Profile
    November 10, 2016, 04:08:02 AM
     #2003
    Quote from: mewhoyou on November 10, 2016, 03:48:18 AM
    Quote from: CoinPro69 on November 10, 2016, 01:42:27 AM
    Quote from: Minituning on November 10, 2016, 12:43:58 AM
    Can you explain me your config ? I cant obtain more than 40 H/s on my 470 cards .

    Wich parameters are you using , operating system , drivers?

    I have memory timmings modified on my bios

    Thanks in advice

    No Problem, I help you with your Minituning Bro Grin

    I have Win 10 Pro, 16 GB Ram, 6600K @ 4,2 Gh'z, latest AMD Driver 16.11.2 (4.November 2016) (16.11.3 is out, 9 Nov - will try that now)
    470 Nitro 4GB, but it should work with other 470s 4gb as well.

    Here is my unique tutorial how to speed up your 470 4GB to 60+ H/s - only for lovely people  Cheesy
    http://xup.in/dl,27875229

    https://s12.postimg.org/ek0t8pgi5/470_4gb.jpg
     Wink


    DO NOT DOWNLOAD ... VIRUS
    Are you nuts?
    There is no virus lol!  Shocked
    I just did put the claymore package inside, that shows this:
    https://virustotal.com/de/file/f3527b0f2839b4163cd5075f6132cfb71749f83ee48645958ec51cd7e6df2467/analysis/

    However I repackaged it without the claymore miner, so it's clean now!
    Here is the cleaned package: https://virustotal.com/de/file/1fb6d26a917d4810be57db6aa28a4c7064c26ab03679b400dfa81a6c85e41d34/analysis/1478750577/

    Download Tutorial:
    http://xup.in/dl,12078179

    You can download all the exe files inside from other sources if you wish or don't trust, but you can check out those crc they are all original!
    It's mostly about the tutorial!

  • Swimmer63
    Legendary
    *
    Offline Offline

    Activity: 1593
    Merit: 1004



    View Profile
    November 10, 2016, 04:29:00 AM
     #2004
    Quote from: delle54 on November 10, 2016, 12:52:49 AM
    Quote from: sakuleo on November 10, 2016, 12:42:17 AM
    whit rx 470 uses 15.12 too? hoW? is this possible?
    No. Use newer drivers.
    I loaded 15.12 then put in the disk that came with the RX miners.  But 15.12 had already recognized them on ASRock H81 Pro BTC.
    You can also just run the newest driver.  Claymore always uses 15.12, but for most the newest driver will work just as well.

  • Swimmer63
    Legendary
    *
    Offline Offline

    Activity: 1593
    Merit: 1004



    View Profile
    November 10, 2016, 04:38:22 AM
     #2005
    Quote from: louiseth1 on November 10, 2016, 02:14:47 AM
    I still can't understand why he won't release the linux version.

    He's basically turning heads to the biggest miners out there, the large scale farmers.

    Serious operations with lots of rigs don't run Windows. He could bank so much with his "dev fee" by providing binaries for linux.

    As a group they stuck their foot in their mouth by demonizing Claymore and his DevFee.  Also a lot of talk about how it's only a good miner because he stole code, despite his explanation and amends.  Now that his miner runs faster than SilentArmy, Genoil and the rest they are all complaining he won't issue a linux version.  Can't have it both ways.  He is concentrating on the Windows version as we have stuck with him.

  • Nthused
    Legendary
    *
    Offline Offline

    Activity: 1554
    Merit: 1001



    View Profile
    November 10, 2016, 04:42:24 AM
     #2006
    Quote from: Swimmer63 on November 10, 2016, 04:38:22 AM
    Quote from: louiseth1 on November 10, 2016, 02:14:47 AM
    I still can't understand why he won't release the linux version.

    He's basically turning heads to the biggest miners out there, the large scale farmers.

    Serious operations with lots of rigs don't run Windows. He could bank so much with his "dev fee" by providing binaries for linux.

    As a group they stuck their foot in their mouth by demonizing Claymore and his DevFee.  Also a lot of talk about how it's only a good miner because he stole code, despite his explanation and amends.  Now that his miner runs faster than SilentArmy, Genoil and the rest they are all complaining he won't issue a linux version.  Can't have it both ways.  He is concentrating on the Windows version as we have stuck with him.

    This is why there is a "DevFee" for this miner so that the dev can afford to produce these increases for us average users Wink

  • gennadiv
    Full Member
    ***
    Offline Offline

    Activity: 139
    Merit: 100


    View Profile
    November 10, 2016, 05:46:42 AM
     #2007
    лyчшиe вapиaнты этo 2.1 и 3.1(лyчший)

  • rednoW
    Legendary
    *
    Offline Offline

    Activity: 1510
    Merit: 1003


    View Profile
    November 10, 2016, 05:57:58 AM
     #2008
    As for the no Linux issue - I think the reason is he can't pack binary to defend it from disassembler under Linux so he stops...

  • BlockChasers
    Newbie
    *
    Offline Offline

    Activity: 46
    Merit: 0


    View Profile WWW
    November 10, 2016, 05:59:38 AM
     #2009
    My r9 290 tri-x wont get stable.  After 20 mins it goes to 0H/s then the pc crashes after a bit.  v3.1  I have dropped the speeds to 1000/1300 (stock) and upped the volt +75 and its still dying.

  • d57heinz
    Legendary
    *
    Offline Offline

    Activity: 1453
    Merit: 1011


    Bitcoin Talks Bullshit Walks


    View Profile
    November 10, 2016, 06:06:49 AM
    Last edit: November 10, 2016, 06:29:28 AM by d57heinz
     #2010
    To those mining on flypool. MOVE immediately. I was getting 30% less than Calcs on fly. Moved to coinmine.pl and haven't looked back. Making very close to calcs now.  Test it for yourselves.

    Rednow. That and the fact that now that we are surpassing their speeds they are losing their cool. Cause well they have investors breathing down their neck. Hope that was lesson to those that buy/sell cloud contracts before price and hashrate settle in. 50 BTC for 500s/s. Wow my 390x rig does that alone. A fool and his money!  Really does give crypto a bad wrap.

    BR
    d57heinz
    As in nature, all is ebb and tide, all is wave motion, so it seems that in all branches of industry, alternating currents - electric wave motion - will have the sway. ~Nikola Tesla~

  • deucedeuce37
    Newbie
    *
    Offline Offline

    Activity: 11
    Merit: 0


    View Profile
    November 10, 2016, 06:18:26 AM
     #2011
    HW:
    - 6x Reference Sapphire RX 470 OC 4GB (5x Elpida memory/1x Hynix memory)
    - Gigabyte GA-Z97X-Gaming 3, Rev 1.0, Bios F8d (disabled USB3, lan, serial, audio, virtualization, and on chip vga)
    - G1840 CPU
    - 4G DDR3 1600MHz Single Channel
    - 120GB Micron m600 m.2 Sata SSD
    - RT73 USB wireless-n
    - PSU: 1200W Corsair AX1200i
    - 6x powered USB risers v006

    SW:
    - Win10 Pro 64-bit version 1607 (anniversary edition) fully updated, stripped out a little bloatware
    - Crimson 16.10.3
    - Claymore v 3.1 (-i 2 -dbg -1 -colors 0)

    Results:
    - Reported Hashrate: 335 sol/s (56 sol/s per card)
    - Power: 610W

    BIOS Settings
    - GPU 1100 @ 900mV
    - Mem 1900 @ 900mv with timings from 1500MHz
    - Fan 3800RPM 60%

    Stable for a few hours with 47C card temps.  Will retry with an i5 4690k and 8gb 2133 mhz ram tomorrow. Also tempted to try 16.11.x drivers.

  • fredeq
    Legendary
    *
    Offline Offline

    Activity: 1536
    Merit: 1005


    View Profile WWW
    November 10, 2016, 06:25:59 AM
     #2012
    Quote from: deucedeuce37 on November 10, 2016, 06:18:26 AM
    HW:
    - 6x Reference Sapphire RX 470 OC 4GB (5x Elpida memory/1x Hynix memory)
    - Gigabyte GA-Z97X-Gaming 3, Rev 1.0, Bios F8d (disabled USB3, lan, serial, audio, virtualization, and on chip vga)
    - G1840 CPU
    - 4G DDR3 1600MHz Single Channel
    - 120GB Micron m600 m.2 Sata SSD
    - RT73 USB wireless-n
    - PSU: 1200W Corsair AX1200i
    - 6x powered USB risers v006

    SW:
    - Win10 Pro 64-bit version 1607 (anniversary edition) fully updated, stripped out a little bloatware
    - Crimson 16.10.3
    - Claymore v 3.1 (-i 2 -dbg -1 -colors 0)

    Results:
    - Reported Hashrate: 335 sol/s (56 sol/s per card)
    - Power: 610W

    BIOS Settings
    - GPU 1100 @ 900mV
    - Mem 1900 @ 900mv with timings from 1500MHz
    - Fan 3800RPM 60%

    Stable for a few hours with 47C card temps.  Will retry with an i5 4690k and 8gb 2133 mhz ram tomorrow. Also tempted to try 16.11.x drivers.

    How did you edit bios for elipda cards? It doesnt work in PolarisBiosEditor, right?
    https://whattomine.com - Check what to mine Smiley

  • deucedeuce37
    Newbie
    *
    Offline Offline

    Activity: 11
    Merit: 0


    View Profile
    November 10, 2016, 06:30:59 AM
     #2013
    Quote from: fredeq on November 10, 2016, 06:25:59 AM
    Quote from: deucedeuce37 on November 10, 2016, 06:18:26 AM
    HW:
    - 6x Reference Sapphire RX 470 OC 4GB (5x Elpida memory/1x Hynix memory)
    - Gigabyte GA-Z97X-Gaming 3, Rev 1.0, Bios F8d (disabled USB3, lan, serial, audio, virtualization, and on chip vga)
    - G1840 CPU
    - 4G DDR3 1600MHz Single Channel
    - 120GB Micron m600 m.2 Sata SSD
    - RT73 USB wireless-n
    - PSU: 1200W Corsair AX1200i
    - 6x powered USB risers v006

    SW:
    - Win10 Pro 64-bit version 1607 (anniversary edition) fully updated, stripped out a little bloatware
    - Crimson 16.10.3
    - Claymore v 3.1 (-i 2 -dbg -1 -colors 0)

    Results:
    - Reported Hashrate: 335 sol/s (56 sol/s per card)
    - Power: 610W

    BIOS Settings
    - GPU 1100 @ 900mV
    - Mem 1900 @ 900mv with timings from 1500MHz
    - Fan 3800RPM 60%

    Stable for a few hours with 47C card temps.  Will retry with an i5 4690k and 8gb 2133 mhz ram tomorrow. Also tempted to try 16.11.x drivers.

    How did you edit bios for elipda cards? It doesnt work in PolarisBiosEditor, right?

    PolarisBiosEditor worked fine for me with both memory types.  Maybe it was a different card that other people were having problems with Elpida on.  If you have one of those cards there is a thread on the ethereum community forum on how to edit it with a hex editor.

  • Havane
    Jr. Member
    *
    Offline Offline

    Activity: 76
    Merit: 3


    View Profile
    November 10, 2016, 06:36:08 AM
     #2014
    Quote from: d57heinz on November 10, 2016, 06:06:49 AM
    To those mining on flypool. MOVE immediately. I was getting 30% less than Calcs on fly. Moved to coinmine.pl and haven't looked back. Making very close to calcs now.  Test it for yourselves.

    Rednow. That and the fact that now that we are surpassing their speeds they are losing their cool. Cause well they have investors breathing down their neck. Hope that was lesson to those that buy/sell cloud contracts before price and hashrate settle in. 50 BTC for 500s/s. Wow my 390x rig does that alone. A fool and his money!  Really does give crypto a bad wrap.

    BR
    d57heinz

    How do you do your calcs ?

  • deucedeuce37
    Newbie
    *
    Offline Offline

    Activity: 11
    Merit: 0


    View Profile
    November 10, 2016, 06:39:13 AM
     #2015
    Quote from: d57heinz on November 10, 2016, 06:06:49 AM
    To those mining on flypool. MOVE immediately. I was getting 30% less than Calcs on fly. Moved to coinmine.pl and haven't looked back. Making very close to calcs now.  Test it for yourselves.

    Rednow. That and the fact that now that we are surpassing their speeds they are losing their cool. Cause well they have investors breathing down their neck. Hope that was lesson to those that buy/sell cloud contracts before price and hashrate settle in. 50 BTC for 500s/s. Wow my 390x rig does that alone. A fool and his money!  Really does give crypto a bad wrap.

    BR
    d57heinz

    Any advice on which port to use for 330 sol/s rigs?
    PORT (VARDIFF):   7007
    HIGH DIFF PORT (VARDIFF):   7077
    STATIC PORT (DIFF20):   8008
    STATIC PORT (DIFF500):   8088

  • d57heinz
    Legendary
    *
    Offline Offline

    Activity: 1453
    Merit: 1011


    Bitcoin Talks Bullshit Walks


    View Profile
    November 10, 2016, 06:41:27 AM
     #2016
    Quote from: Havane on November 10, 2016, 06:36:08 AM
    Quote from: d57heinz on November 10, 2016, 06:06:49 AM
    To those mining on flypool. MOVE immediately. I was getting 30% less than Calcs on fly. Moved to coinmine.pl and haven't looked back. Making very close to calcs now.  Test it for yourselves.

    Rednow. That and the fact that now that we are surpassing their speeds they are losing their cool. Cause well they have investors breathing down their neck. Hope that was lesson to those that buy/sell cloud contracts before price and hashrate settle in. 50 BTC for 500s/s. Wow my 390x rig does that alone. A fool and his money!  Really does give crypto a bad wrap.

    BR
    d57heinz

    How do you do your calcs ?

    I use this site here. https://www.cryptocompare.com/mining/calculator/zec

    @dueceduece37
    Use port 7007. The high diff static port starts at 32k. A bit much. Vardiff starts at 192 and adjusts accordingly
    As in nature, all is ebb and tide, all is wave motion, so it seems that in all branches of industry, alternating currents - electric wave motion - will have the sway. ~Nikola Tesla~

  • Golku
    Full Member
    ***
    Offline Offline

    Activity: 263
    Merit: 100


    View Profile
    November 10, 2016, 06:44:16 AM
     #2017
    Thanks for the new update!

  • louiseth1
    Legendary
    *
    Offline Offline

    Activity: 924
    Merit: 1000


    Bitfarms.io


    View Profile WWW
    November 10, 2016, 06:51:48 AM
     #2018
    Quote from: AzzAz on November 10, 2016, 03:34:29 AM
    Quote from: louiseth1 on November 10, 2016, 03:23:06 AM
    Huh.. He did release 1.1 in linux.

    Usually when you have a solid source (and he does, and he already produced windows and linux binaries on previous releases) it is easy to compile for all platforms from the same source code. Are you sure you know what you are talking about?
    Claymore said few times he will not do linux after 1.1. Read  the tread.

    I did, just looking for a legit reason not to release it which someone else provided (the fact Claymore has a hard time packing his binary to avoid it from being reversed).
    Bitfarms.io - Powering Blockchains with Sustainable Energy

  • ReFLex001
    Newbie
    *
    Offline Offline

    Activity: 5
    Merit: 0


    View Profile
    November 10, 2016, 06:52:09 AM
    Last edit: November 10, 2016, 07:10:45 AM by ReFLex001
     #2019
    Quote from: deucedeuce37 on November 10, 2016, 06:39:13 AM
    Any advice on which port to use for 330 sol/s rigs?
    PORT (VARDIFF):   7007
    HIGH DIFF PORT (VARDIFF):   7077
    STATIC PORT (DIFF20):   8008
    STATIC PORT (DIFF500):   8088

    HIGH DIFF PORT (VARDIFF):   7077 - the best in my opinion

    http://image.prntscr.com/image/4a37eba5c01f4938966aad14df849032.png

  • fittsy
    Sr. Member
    ****
    Offline Offline

    Activity: 441
    Merit: 252



    View Profile WWW
    November 10, 2016, 06:54:03 AM
     #2020
    Quote from: Nthused on November 10, 2016, 02:02:19 AM
    Hmmm some people are reporting better hashrate with more recent drivers with the latest version of the miner, I am still using 15.12 AMD Drivers and with Claymore's AMD GPU Miner 3.1 I went from 46-50 SOL/s to 50-55 SOL/s with stock GPU settings & no increase in intensity at all on a R9 280x

    Should we stay on 15.12 or upgrade to 16.9+ Drivers ?


    I'm on the more recent drivers. Doing approx 56 sols with my R9 280x. (From 52 - 59 so 56 average)

    I also use the "-i 2" setting. If you're not using that setting try that first before changing your driver. See if that improves your speeds.
    MinerParts - 8 GPU Riserless motherboard with Intel 3855 CPU - 1600w fully modular power supply
    Best quality PCIe Powered Risers Shop on Amazon - Shop on eBay - or ship direct at MinerParts.com <- best for international or crypto purchases
    Pages: « 1 ... 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 [101] 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 ... 759 »
      Print  
Page 100
Viewing Page: 101

IRLBTC™ © 2025 IRLBTC.com