<<  >> (p.103)
    Author Topic: Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)  (Read 3839407 times)

    • bittawm
    Legendary
    *
    Offline Offline

    Activity: 1898
    Merit: 1087



    View Profile
    November 10, 2016, 09:43:08 AM
     #2041
    who has the best mod for this software
    @bittawm is my real telegram
    @bittawm is my real twitter
    beware of impersonators

  • nguyenphuong
    Newbie
    *
    Offline Offline

    Activity: 4
    Merit: 0


    View Profile
    November 10, 2016, 09:48:48 AM
     #2042
    Quote from: d57heinz on November 10, 2016, 09:25:46 AM
    Quote from: nguyenphuong on November 10, 2016, 08:03:23 AM
    Hi d57heinz, I'm a new to mining cryptocurrencies. I have some question, can you help me?

    1. I'm in ASIA so i should use STRATUM Asia?
    2. What are different between ports?
    3. I have 4 workers, each worker have 160H/s AVG, which is port should i use for my worker?

    Thank for your help! Sorry for my bad English!

    Hello

    1 In practice it's usually best to mine to closest startum server. Geography doesn't always mean lowest ping so a good rule of thumb would be to run a ping test on the servers to find your best match.  

    2 mining pools use share difficulty to throttle the speed at which you get work from the pool.  18 shares per minute seems to be close to what most pools use.  they do this in order to not flood the pool with requests for data. For instance if you rent from nicehash and point to coinmine with 10000sols/s then you find about 50 diff 192 shares per second at normal luck if you point to port 7007. If you point that same hash to port 8088 which says static at 500 but is really 32000. Then you would find about 1 share every three seconds with 10ksol/s. Hope that's not too confusing Smiley

    3. I would point them at 7007 being as they are so close to starting diff.

    BR
    d57heinz

    Thank you so much! Smiley

  • draxy
    Newbie
    *
    Offline Offline

    Activity: 11
    Merit: 0


    View Profile
    November 10, 2016, 09:59:38 AM
     #2043
    Hi all,

    I have 5 x rx 480 8gb sapphire nitro+ oc.
    With claymore's zcash v3.1 and I get the following results:
    - 700W power usage
    - 310H/s
    so roughly 62H/s per gpu

    Any idea how to improve hashrate and decrease power?
    Thanks

  • BlockChasers
    Newbie
    *
    Offline Offline

    Activity: 46
    Merit: 0


    View Profile WWW
    November 10, 2016, 10:00:10 AM
    Last edit: November 10, 2016, 10:52:59 AM by BlockChasers
     #2044
    3.1 crashes both my 290 and 480 if i do -i 1 or -i 2.  Testing -i 0 now before rolling back.  16.10.3 drivers.

    *crashed on -i 0 too.

  • d57heinz
    Legendary
    *
    Offline Offline

    Activity: 1453
    Merit: 1011


    Bitcoin Talks Bullshit Walks


    View Profile
    November 10, 2016, 10:04:21 AM
     #2045
    Quote from: nguyenphuong on November 10, 2016, 09:48:48 AM
    Quote from: d57heinz on November 10, 2016, 09:25:46 AM
    Quote from: nguyenphuong on November 10, 2016, 08:03:23 AM
    .....

    Thank you so much! Smiley

    Your welcome.Smiley
    As in nature, all is ebb and tide, all is wave motion, so it seems that in all branches of industry, alternating currents - electric wave motion - will have the sway. ~Nikola Tesla~

  • Alehandros
    Member
    **
    Offline Offline

    Activity: 72
    Merit: 10


    View Profile
    November 10, 2016, 10:16:52 AM
     #2046
    Quote from: draxy on November 10, 2016, 09:59:38 AM
    Hi all,

    I have 5 x rx 480 8gb sapphire nitro+ oc.
    With claymore's zcash v3.1 and I get the following results:
    - 700W power usage
    - 310H/s
    so roughly 62H/s per gpu

    Any idea how to improve hashrate and decrease power?
    Thanks

    -powlim -50

    ...powlim can go from +50 to -50, for my Nano's I run -powlim -47 and still get 60 per card, 480s still suck atm though

  • nowaltcoin
    Full Member
    ***
    Offline Offline

    Activity: 158
    Merit: 100


    View Profile
    November 10, 2016, 10:18:39 AM
     #2047
    Good morning,

    maybee this is the wrong place to post but i'll give it a try.

    I'am in mining for a long time. Just get in contact with zcash i reuse an old rig ( 6 * 7790 1GB each card) to mine zhash.

    I tried all miners and i'am getting about 32 sol/s for the rig, not that much but anyway (it is only using 280Watt)

    Every time i try to use the silentarmy-kernel (no matter which miner) i get an opencl-error

    (openclcreate -61). It seems to be a problem that the silentarmy-kernel wants to have more than 1 GB GPU-memory.

    Today i tried the nheqminer 0.4b and it starts (same opencl-error) but it shows me the i/s but no sol/s.  Grin

    Using the normal kernel i get 16,5 i/s = 31,3 sol/s
    Using the silentarmy-kernel i get 68 i/s = 0 sol/s

    It seems to be that the old hd7790 could do 4 times faster with the silentarmy-kernel but the can't due to the lack of GPU-memory.

    Is there a chance that there will be a silentarmy-kernel which will use only 1GB of GPU-Memory ?


    Have a nice day
    8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org
    12 * GPU's mining ETN/Sumocoin
    You like to mine something different: https://deutsche-emark.de/

  • mettalmag
    Legendary
    *
    Offline Offline

    Activity: 1085
    Merit: 1003


    ≡v≡


    View Profile
    November 10, 2016, 10:22:42 AM
     #2048
    I have several noob questions
    what are the optimal temperatures tu run with -tt command ? I used to have 75,75,75 on all my miners and fans were on 30-35%, I thought changing them to 68,68,68 were fans run at 40-48%. This goes for all RX480 8G models like, asus strix, spahire nitro, gigabyte and xfx.

    Also I was looking for auto payout or transaction system, which will allow me to transfer % amount of coins to another wallet, any idea would be helpful here.

    And last one, when I execute reboot.bat from remote manager it only shuts down the miner software itself, should it work that way or should it restart the PC itself ?

    and here is my config file, if you have any suggestions I'd be glad to hear them
    Code:
    ZecMiner64.exe -zpool zec.coinmine.pl:7007 -zwal ### -zpsw ### -r 240 -tt 75,75,75 -tstop 90,90,90 -ttli 83,83,83 -i 2



    Quote from: nowaltcoin on November 10, 2016, 10:18:39 AM
    Good morning,

    maybee this is the wrong place to post but i'll give it a try.

    I'am in mining for a long time. Just get in contact with zcash i reuse an old rig ( 6 * 7790 1GB each card) to mine zhash.

    I tried all miners and i'am getting about 32 sol/s for the rig, not that much but anyway (it is only using 280Watt)

    Every time i try to use the silentarmy-kernel (no matter which miner) i get an opencl-error

    (openclcreate -61). It seems to be a problem that the silentarmy-kernel wants to have more than 1 GB GPU-memory.

    Today i tried the nheqminer 0.4b and it starts (same opencl-error) but it shows me the i/s but no sol/s.  Grin

    Using the normal kernel i get 16,5 i/s = 31,3 sol/s
    Using the silentarmy-kernel i get 68 i/s = 0 sol/s

    It seems to be that the old hd7790 could do 4 times faster with the silentarmy-kernel but the can't due to the lack of GPU-memory.

    Is there a chance that there will be a silentarmy-kernel which will use only 1GB of GPU-Memory ?


    Have a nice day
    what drivers are you using ?

  • snakey
    Legendary
    *
    Offline Offline

    Activity: 1386
    Merit: 1001



    View Profile
    November 10, 2016, 10:28:53 AM
     #2049
    Quote from: Alehandros on November 10, 2016, 10:16:52 AM
    Quote from: draxy on November 10, 2016, 09:59:38 AM
    Hi all,

    I have 5 x rx 480 8gb sapphire nitro+ oc.
    With claymore's zcash v3.1 and I get the following results:
    - 700W power usage
    - 310H/s
    so roughly 62H/s per gpu

    Any idea how to improve hashrate and decrease power?
    Thanks

    -powlim -50

    ...powlim can go from +50 to -50, for my Nano's I run -powlim -47 and still get 60 per card, 480s still suck atm though



    Thanks for that...

    What about cvddc and mvddc please? (I have the rx470 8gb card)

    Just want to lower the power and keep the sol/s...

    Thanks

  • Alehandros
    Member
    **
    Offline Offline

    Activity: 72
    Merit: 10


    View Profile
    November 10, 2016, 10:39:44 AM
     #2050
    Quote from: snakey on November 10, 2016, 10:28:53 AM
    Quote from: Alehandros on November 10, 2016, 10:16:52 AM
    Quote from: draxy on November 10, 2016, 09:59:38 AM
    Hi all,

    I have 5 x rx 480 8gb sapphire nitro+ oc.
    With claymore's zcash v3.1 and I get the following results:
    - 700W power usage
    - 310H/s
    so roughly 62H/s per gpu

    Any idea how to improve hashrate and decrease power?
    Thanks

    -powlim -50

    ...powlim can go from +50 to -50, for my Nano's I run -powlim -47 and still get 60 per card, 480s still suck atm though



    Thanks for that...

    What about cvddc and mvddc please? (I have the rx470 8gb card)

    Just want to lower the power and keep the sol/s...

    Thanks

    the voltage is only good if you want to overclock, Claymore notes that underclocking isn't possible.

    Be careful though, I really upset one of my 6x480 rigs messing with the voltage!

    power versus sol/s is always a trade-off! 700W for 310 is great, you may lose 10-20 total.

    To make you jealous one of my Nano R9 rigs puts out 360, pulling 650W, although weirdly that is with the PRO 61BTC board only , the PRO 81 boards dont hash as fast! :/

  • lexele
    Full Member
    ***
    Offline Offline

    Activity: 192
    Merit: 100


    View Profile
    November 10, 2016, 10:55:27 AM
     #2051
    V3.1 +15-20% with RX470 4GB. VRAM usage is close to the limit. CPU usage very high with old Q6600

  • mettalmag
    Legendary
    *
    Offline Offline

    Activity: 1085
    Merit: 1003


    ≡v≡


    View Profile
    November 10, 2016, 10:56:18 AM
     #2052
    Quote from: lexele on November 10, 2016, 10:55:27 AM
    V3.1 +15-20% with RX470 4GB. VRAM usage is close to the limit. CPU usage very high with old Q6600
    are you using -i option ?

  • ans34
    Full Member
    ***
    Offline Offline

    Activity: 161
    Merit: 100


    View Profile
    November 10, 2016, 11:02:24 AM
     #2053
    Claymore no nVidia support in zcash miner is your principled pozition or it's just current state of miner developing ang later we will see it?

  • deadsix
    Hero Member
    *****
    Offline Offline

    Activity: 751
    Merit: 517


    Fail to plan, and you plan to fail.


    View Profile
    November 10, 2016, 11:07:22 AM
     #2054
    V3.1 stable on all machines except one, which is a 7 card rig. Few minutes in one of the GPU's ( always at index 1) would report 0 sols/s, the watchdog will restart the miner, and "Desplay driver stopped working, has recovered" error pops up, and then the system just crashes.
    Some people pointed out that it could be a riser issue, but I've tried isolating the faulty card by running each card on its own thread, and they work fine. Its only if I run one instance of claymore's with all 7 cards that this problem occurs. I've tried moving from modded bios to stock, different driver versions, and this keeps happening still. Any clues?
    Ethereum/Zcash/Monero Mining Bangalore https://bt.irlbtc.com/view/1703592

  • muchoman
    Sr. Member
    ****
    Offline Offline

    Activity: 465
    Merit: 250


    View Profile
    November 10, 2016, 11:09:24 AM
     #2055
    Quote from: ans34 on November 10, 2016, 11:02:24 AM
    Claymore no nVidia support in zcash miner is your principled pozition or it's just current state of miner developing ang later we will see it?

    Read this!

    https://bt.irlbtc.com/view/1670733.msg16811240#msg16811240

  • robertkedves
    Member
    **
    Offline Offline

    Activity: 86
    Merit: 10


    View Profile
    November 10, 2016, 11:14:11 AM
     #2056
    Awesome thing you did Claymore!

    Thank you for the miner you provide...I bet the ZEC difficulty increased mostly because of Clamore's ZCash AMD GPU Miner v2.0, 2.1, 3.0, 3.1

    Good luck

  • ghostfaceuk
    Sr. Member
    ****
    Offline Offline

    Activity: 410
    Merit: 250


    View Profile
    November 10, 2016, 11:15:05 AM
     #2057
    Quote from: deadsix on November 10, 2016, 11:07:22 AM
    V3.1 stable on all machines except one, which is a 7 card rig. Few minutes in one of the GPU's ( always at index 1) would report 0 sols/s, the watchdog will restart the miner, and "Desplay driver stopped working, has recovered" error pops up, and then the system just crashes.
    Some people pointed out that it could be a riser issue, but I've tried isolating the faulty card by running each card on its own thread, and they work fine. Its only if I run one instance of claymore's with all 7 cards that this problem occurs. I've tried moving from modded bios to stock, different driver versions, and this keeps happening still. Any clues?

    Does the problem occur if you run the rig without that card (ie as a six card rig instead of a 7)?

    Have you tried swapping cards in the risers to see if it still happens in that position or does the problem follow the card?

  • ivomm
    Legendary
    *
    Offline Offline

    Activity: 1928
    Merit: 3306


    All good things to those who wait


    View Profile
    November 10, 2016, 11:31:45 AM
     #2058
    Quote from: deadsix on November 10, 2016, 11:07:22 AM
    V3.1 stable on all machines except one, which is a 7 card rig. Few minutes in one of the GPU's ( always at index 1) would report 0 sols/s, the watchdog will restart the miner, and "Desplay driver stopped working, has recovered" error pops up, and then the system just crashes.
    Some people pointed out that it could be a riser issue, but I've tried isolating the faulty card by running each card on its own thread, and they work fine. Its only if I run one instance of claymore's with all 7 cards that this problem occurs. I've tried moving from modded bios to stock, different driver versions, and this keeps happening still. Any clues?

    The same thing here. I got all rigs except 1 working with v. 2.1-3.1 with -i 2. The problematic rig has 6 R9 390 which work about 20 min with 60-ish sols (and over 1% rejected shares) then 1 card stops. Curiously, with -i 0 there is no problem and the cards give 70-75 sols! I tried everything but it is not the card nor the riser.

  • Alehandros
    Member
    **
    Offline Offline

    Activity: 72
    Merit: 10


    View Profile
    November 10, 2016, 11:33:41 AM
     #2059
    Quote from: ghostfaceuk on November 10, 2016, 11:15:05 AM
    Quote from: deadsix on November 10, 2016, 11:07:22 AM
    V3.1 stable on all machines except one, which is a 7 card rig. Few minutes in one of the GPU's ( always at index 1) would report 0 sols/s, the watchdog will restart the miner, and "Desplay driver stopped working, has recovered" error pops up, and then the system just crashes.
    Some people pointed out that it could be a riser issue, but I've tried isolating the faulty card by running each card on its own thread, and they work fine. Its only if I run one instance of claymore's with all 7 cards that this problem occurs. I've tried moving from modded bios to stock, different driver versions, and this keeps happening still. Any clues?

    Does the problem occur if you run the rig without that card (ie as a six card rig instead of a 7)?

    Have you tried swapping cards in the risers to see if it still happens in that position or does the problem follow the card?

    my 7 card rig is always tricky, are we too ambitious? which mobo you using?

  • nowaltcoin
    Full Member
    ***
    Offline Offline

    Activity: 158
    Merit: 100


    View Profile
    November 10, 2016, 11:40:29 AM
     #2060
    Quote from: mettalmag on November 10, 2016, 10:22:42 AM
    I have several noob questions
    what are the optimal temperatures tu run with -tt command ? I used to have 75,75,75 on all my miners and fans were on 30-35%, I thought changing them to 68,68,68 were fans run at 40-48%. This goes for all RX480 8G models like, asus strix, spahire nitro, gigabyte and xfx.

    Also I was looking for auto payout or transaction system, which will allow me to transfer % amount of coins to another wallet, any idea would be helpful here.

    And last one, when I execute reboot.bat from remote manager it only shuts down the miner software itself, should it work that way or should it restart the PC itself ?

    and here is my config file, if you have any suggestions I'd be glad to hear them
    Code:
    ZecMiner64.exe -zpool zec.coinmine.pl:7007 -zwal ### -zpsw ### -r 240 -tt 75,75,75 -tstop 90,90,90 -ttli 83,83,83 -i 2



    Quote from: nowaltcoin on November 10, 2016, 10:18:39 AM
    Good morning,

    maybee this is the wrong place to post but i'll give it a try.

    I'am in mining for a long time. Just get in contact with zcash i reuse an old rig ( 6 * 7790 1GB each card) to mine zhash.

    I tried all miners and i'am getting about 32 sol/s for the rig, not that much but anyway (it is only using 280Watt)

    Every time i try to use the silentarmy-kernel (no matter which miner) i get an opencl-error

    (openclcreate -61). It seems to be a problem that the silentarmy-kernel wants to have more than 1 GB GPU-memory.

    Today i tried the nheqminer 0.4b and it starts (same opencl-error) but it shows me the i/s but no sol/s.  Grin

    Using the normal kernel i get 16,5 i/s = 31,3 sol/s
    Using the silentarmy-kernel i get 68 i/s = 0 sol/s

    It seems to be that the old hd7790 could do 4 times faster with the silentarmy-kernel but the can't due to the lack of GPU-memory.

    Is there a chance that there will be a silentarmy-kernel which will use only 1GB of GPU-Memory ?


    Have a nice day
    what drivers are you using ?

    Oh sorry... I'am using windows 8.1 with the newest Driver and a patch that windows recognize the 6'th GPU

    thx for your help
    8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org
    12 * GPU's mining ETN/Sumocoin
    You like to mine something different: https://deutsche-emark.de/
    Pages: « 1 ... 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 [103] 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 ... 758 »
      Print  
Page 102
Viewing Page: 103

IRLBTC™ © 2025 IRLBTC.com