Thank you, i just tried this. My 1bash setting has -dcri 40 argument, but when i use + and - keys dcri starts changing from 70, so my setting 40 not works.
When i manualy lower it to 40 and then restart terminal miner, it again become 70
Where did you set your -dcri 40 at? Did you change any other files besides onebash? If all you changed was onebash, paste your settings here and I'll look over them for you if you'd like. (remove your wallet addresses if your paranoid)
Thanks for looking
I didn't change anything, only 1bash.
USE_ENVIRONMENTAL_VARIBLES="NO" #YES NO
DOT_POOL_FORMAT_or_FORWARD_SLASH_POOL_FORMAT="SLASH" # DOT or SLASH # formerly ETHERMINEdotORG
CLAYMORE_VERSION="9_7" # choose 9_8 or 9_7 or 9_5 or 9_4 or 8_0
ETHMINER_or_GENOIL_or_CLAYMORE="CLAYMORE" # choose ETHMINER or GENOIL or CLAYMORE
ETH_WORKER="$WORKERNAME"
ETH_ADDRESS="xxxxxxxxxxxxxxxxxxxxxxxxxxx"
ETH_POOL="eth-eu1.nanopool.org:9999"
ETH_EXTENTION_ARGUMENTS="-dcri 40" # add any additional claymore arguments desired here
Interesting. Have you tried to close and restart the miner after manually adjusting the dcri? Have you also tried to use version 9_8?
Yes, i did, dcri become 70 again. At 9.8 i have low ETH hashrate at solo i i swiched back to 9.7
Hey, what coin you are trying to mine??
Or paste the result of this command:
ps aux | grep miner
You can wipe out your addresses (but no body can do anything by just knowing your wallet addresses
)
Im mining DUAL ETH_SC
m1 2435 99.7 0.8 416748 34156 pts/18 Sl+ 02:06 22:32home/m1/cpuOPT/cpuminer -a cryptonight -o stratum+tcp://xmr-eu1.nanopool.org:14444 -u 47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGR oyZk3ES1s1V4QVcB.4a0aa02594986680ea5a1216d96f5643b6c19773cfce33e58e2be74336ae5f 5c.053 -p x -t 1
m1 2590 0.0 0.0 27488 2920 ? Ss 02:06 0:00 SCREEN -dmS minerhome/m1/eth/9_7/ethdcrminer64 -epool eth-eu1.nanopool.org:9999 -ewal 0x73736a74f5d80ad6c8c71a4e0651e9dfff789a13/053 -epsw x -allpools 1 -dpool sia-eu1.nanopool.org:7777 -dwal 395a59c4328253491ef79bf01dd637444e79a0d64b92ca56e06087dd8bfc10ef794d1ed1d1a9/053 -dpsw x -dcoin sc -dcri 70 -dbg -1
m1 2591 0.0 0.0 27056 2844 pts/17 S+ 02:06 0:00 screen -r miner
m1 2592 3.5 20.1 189844572 803408 pts/21 Ssl+ 02:06 0:48home/m1/eth/9_7/ethdcrminer64 -epool eth-eu1.nanopool.org:9999 -ewal 0x73736a74f5d80ad6c8c71a4e0651e9dfff789a13/053 -epsw x -allpools 1 -dpool sia-eu1.nanopool.org:7777 -dwal 395a59c4328253491ef79bf01dd637444e79a0d64b92ca56e06087dd8bfc10ef794d1ed1d1a9/053 -dpsw x -dcoin sc -dcri 70 -dbg -1
m1 4187 0.0 0.0 14224 1060 pts/16 S+ 02:28 0:00 grep --color=auto miner
m1@m1-desktop:~$
cpu mining is enabled too
disable it
How cpu mining can change dcri?
The question is how to change dcri argument in 0019. In 1bash dcri setting does not work for me
Well, if you are intentionally doing CPU mining (& you are aware of it) that's fine, it doesn't impact the DCRI at all.
You can set up or change dcri in 1bash or 3main or even both
The thing is, answer is in the result of 'ps aux | grep miner'.
Look closely, you can see -dcri 70 in it.
So fix goes like this (Trust me, this works) :
Go to 3main; search for 'ETC_SC'
find this highlighted line;
screen -dmS miner $HCD -epool $ETC_POOL -ewal $ETCADDR -epsw x -allpools 1 -dpool $SC_POOL -dwal $SCADDR -dpsw x -dcoin sc -dcri 70 -dbg -1 $ETC_EXTENSION_ARGUMENTS
Delete that highlighted bit (if you are intending to add it in 1bash 'ETC_EXTENSION_ARGUMENTS'); and it should look like this:
screen -dmS miner $HCD -epool $ETC_POOL -ewal $ETCADDR -epsw x -allpools 1 -dpool $SC_POOL -dwal $SCADDR -dpsw x -dcoin sc -dbg -1 $ETC_EXTENSION_ARGUMENTS
and add that dcri value here
ETC_EXTENTION_ARGUMENTS="-dcri 40"
or you can even change it from '70' to '40' and don't add any thing under 'ETC_EXTENSION_ARGUMENTS' (it doesn't even matter even if you have same dcri value in 2 places
)
screen -dmS miner $HCD -epool $ETC_POOL -ewal $ETCADDR -epsw x -allpools 1 -dpool $SC_POOL -dwal $SCADDR -dpsw x -dcoin sc -dcri 40 -dbg -1 $ETC_EXTENSION_ARGUMENTS
do the same for 'ETH_SC' by searching 'ETH_SC' in 3main
screen -dmS miner $HCD -epool $ETH_POOL -ewal $ETHADDR -epsw x -allpools 1 -dpool $SC_POOL -dwal $SCADDR -dpsw x -dcoin sc -dcri 70 -dbg -1 $ETH_EXTENSION_ARGUMENTS
Try this it will definitely work, let me know if you still see any issue of it.
