again, you are doing something wrong, I have no difference what ever I mine. It could be the miner. If you are happy with nvOC then stick with it, its a really good way to mine for Nvidia owners.

I also have a few GTX-1080 but no GTX-9xx . There is a thread on how to tweak the GTX-9xx on Windows and people are getting insane results. Ill post a link if I can find it.

Its your choice mate
They are banning people all around the globe, Enhanced accounts, Basic accounts, ... and not answering any tickets, and they are banning people from their slack support channel just for asking why
They even did not answered cointelegraph on the issue yet.
It seems like a huge problem.

I dont have much experience on other exchanges
There are many : Binance, Kraken, Bitstamp, Coinbase, GDAX, Coss, Cryptopia, Yobit, ....

Hmm well I won’t argue with that, I was a total mining-noob back then (probably still am).
Thanks for the tips! I will look into this..
If you find that link it would be sweet

Hello everyone!

2fullzero: Does NVOC support 19GPU on ASUS B250 Mining Expert?

And whats the limit of GPU on NVOC for now?

Thank you!

You are talking about this part right?:

nvcc_ARCH  = -gencode=arch=compute_50,code=\"sm_50,compute_50\"

nvcc_ARCH += -gencode=arch=compute_52,code=\"sm_52,compute_52\"
nvcc_ARCH += -gencode=arch=compute_61,code=\"sm_61,compute_61\"
#nvcc_ARCH += -gencode=arch=compute_35,code=\"sm_35,compute_35\"
#nvcc_ARCH += -gencode=arch=compute_30,code=\"sm_30,compute_30\"
#nvcc_ARCH += -gencode=arch=compute_20,code=\"sm_21,compute_20\"

after changing the make.am file to look like this, the error changed from saying:
nvcc fatal   : Unsupported gpu architecture 'compute_60'

to now saying:
nvcc fatal   : Unsupported gpu architecture 'compute_61'

any ideas?
thanks for your help

I am happy for you papami, but as far as my small miner is concerned, it was clear that he did not stop to re-issue ethminer whatever its version. I have all tried it in the mph_Switch and each time it was difficult to connect or to receive the answers of the pool for validation or rejection of the "share". So, my GPU dropped to 0% activity and the Wdog killed all the miners softwares (!), Including the "plusCPU" (kill -e miner is too generalist, it would be better targetting ONLY the main minor (so not cpuOT (or xmr-stack-cpu) with this command)

I add that with claymore, the MPH_SWITCH will mining libry (LBC) whenever it mines daggerhashimoto. On MPH_Switch and pools, there are several coins that use this algorithm, and as a result, I will dual minning every time this algo (daggerhashimoto) is requested. Expanse, ETC, Musicoin.

Although I lose claymore dev fees, but I think I lose less in fees than with these untimely reboots of ethminer and for some more LBC

Here is the section that I replaced in the file mph_conf.json and in the file 3main below << EOF>home/m1/mph_conf.json


I will try like this some time (until Friday), and, probably that week-end, I would try again your WTM_SWITCH

I will probably ask you for help debugging by private message or here on the public thread.

NB : Your alerts on Bittrex worry me even if I do not store much value on it !
Do you have a rankings about trusting this list of platforms that you quote above?

In fact, I understand that you have to choose between storing on pools or storing on tradding platforms! Complicated and risky in both cases :-(
I try to privilege Kraken to the maximum for me. But Kraken does not work with as many tokens as the others like cryptopia, bittrex or poloniex.

I am new to this but have been mining ZEC for 10days now with no problems.  Tried to mine VTC several times and the miner runs smooth but my address and worker never shows up in the pool.  I can't find what I'm missing and been trying to figure it out on my own for several days. Below is the relevant 1bash and 3main info from my files.

3main

if [ $COIN == "VTC" ]
then
HCD='/home/m1/ASccminer/ccminer'
ADDR="$VTC_ADDRESS.$VTC_WORKER"

if [ $VTC_AUTOCONVERT_TO_BTC == "YES" ]
then
ADDR="$BTC_ADDRESS.$VTC_WORKER"

screen -dmS miner $HCD -a lyra2v2 -o $VTC_POOL -u $ADDR c=BTC

if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi

BITCOIN="theGROUND"

while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi

if [ $VTC_AUTOCONVERT_TO_BTC == "NO" ]
then

screen -dmS miner $HCD -a lyra2v2 -o $VTC_POOL -u $ADDR -p x c=VTC -i $VTC_INTENSITY

if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi

BITCOIN="theGROUND"

while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi
fi

--------------------------------------------------------

1bash

COIN="VTC"

Maxximus007_AUTO_TEMPERATURE_CONTROL="YES"

IAmNotAJeep_and_Maxximus007_WATCHDOG="YES"

# LOCAL will attach the mining process to the gnome or guake terminal
# REMOTE will leave it unattached ready for SSH
LOCALorREMOTE="LOCAL"          # LOCAL  or  REMOTE

TEAMVIEWER="NO"                 # YES NO

SSH="YES"                       # YES NO

POWERLIMIT="NO"                 # YES NO

   POWERLIMIT_WATTS=200

__CORE_OVERCLOCK=50
MEMORY_OVERCLOCK=950

MANUAL_FAN="NO"                # YES NO

   FAN_SPEED=75                    # Set fan speed if MANUAL_FAN="YES"

# GLOBAL_WORKERNAME will use a single worker name for all coins
GLOBAL_WORKERNAME="NO"         # YES NO

   # HOST will use the rigs host address
   # MAC will use the rigs NIC's MAC address
   # CUSTOM will use your own
   AUTO_WORKERNAME="CUSTOM"         # HOST  or  MAC  or  CUSTOM

   # if AUTO_WORKERNAME="CUSTOM"
   CUSTOM_WORKERNAME="NICOSIN1"

# AUTO_UPDATE will enable your rig to pull updates
AUTO_UPDATE="NO"                # YES NO

   # BETA will pull the newest unverified updates
   # STABLE will only pull verified updates
   AUTO_UPDATE="STABLE"         # STABLE  or  BETA

   AUTO_UPDATE_TIMEOUT_IN_MINUTES=1440

_Parallax_MODE="NO"             # YES NO

   pasteBASH="uZNXXJuE"  #change for v0019

   upPASTE_TIMEOUT_IN_MINUTES=30

CLEAR_LOGS_ON_BOOT="YES"        # YES NO

BaliMiner_TELEGRAM_ALERTS="NO"           # YES NO
# ensure IAmNotAJeep_and_Maxximus007_WATCHDOG is set to "YES" if using TELEGRAM_ALERTS to ensure reboot telegrams
# use BotFather ( https://core.telegram.org/bots/api ) to make a new bot and get a CHATID and APIKEY
# BaliMiner is going to make a Guide (+ hopefully a video demonstrating how to set this up; it is not as straightforward as I expected it to be; but it is worth the time to have Telegram Alerts)

   TELEGRAM_TIMEOUT_IN_MINUTES=30

   TELEGRAM_CHATID="422650663"

   TELEGRAM_APIKEY="417738071:AAE7nwRoaJec4f6zMuK9W5dMmpQ_yAt6YAw"

# Mine XMR with CPU
plusCPU="NO"              # YES NO

   threadCOUNT="1"                 # Number of threads for plusCPU: varies per CPU

P106_100_FULL_HEADLESS_MODE="NO"

AUTO_REBOOT="NO"

   REBOOT_TIMEOUT_IN_MINUTES=1440  # once every 24 hours

# If you are using a slow USB Key
SLOW_USB_KEY_MODE="NO"           # YES NO

GPUPowerMizerMode_Adjust="NO"

   # Set PowerMizerMode
   GPUPowerMizerMode=1

SRR="NO"                        # YES NO
   SRR_SERIAL="000055"
   __SRR_SLOT="1"


#######################################################################################

# Maxximus007_AUTO_TEMPERATURE_CONTROL

# Set the target temperature; Recommended ranges: 55 - 75.  Don't set it too low, if the temperature can't be reached with fan adjustments it will decrease power.  If the actual temp is above the target temp this script will up the fan speed.  If actual temp is above value set above and fan speed is 100, the script will lower the power limit.

TARGET_TEMP=70

__FAN_ADJUST=5      # Adjustment size in percent

POWER_ADJUST=5      # Adjustment size in watts

# Difference in actual temperature allowed before action:  Works only if current is BELOW target temp

ALLOWED_TEMP_DIFF=3

# Restore original power limit if fan speed is lower than this percentage

RESTORE_POWER_LIMIT=90

# lowest fan speed that will be used

MINIMAL_FAN_SPEED=30

########################################################################################
#GLOBAL_WORKERNAME implementation
IPW=$(ifconfig | sed -En 's/127.0.0.1//;s/.*inet (addr:)?(([0-9]*\.){3}[0-9]*).*/\2/p')
IP_AS_WORKER=$(echo -n $IPW | tail -c -3 | sed 'y/./0/')
MAC=$(ifconfig -a | grep -Po 'HWaddr \K.*$')
MAC_AS_WORKER=$(echo -n $MAC | sed 'y/:/_/')
if [ $GLOBAL_WORKERNAME == "YES" ]
then
if [ $AUTO_WORKERNAME == "HOST" ]
then
WORKERNAME=$IP_AS_WORKER
fi
if [ $AUTO_WORKERNAME == "MAC" ]
then
WORKERNAME=$MAC_AS_WORKER
fi
if [ $AUTO_WORKERNAME == "CUSTOM" ]
then
WORKERNAME=$CUSTOM_WORKERNAME
fi
fi

------------------------------------------------------

# if YES ensure you update BTC_ADDRESS
VTC_AUTOCONVERT_TO_BTC="NO"        #YES  NO
VTC_INTENSITY=20
VTC_WORKER="Nicosin1"
VTC_ADDRESS="Ve9krAbgcXQgDK882x8Cn3yrT7MLx9jpBp"
VTC_POOL="stratum+tcp://vtc.alwayshashing.com:9171"

yes, that worked, MANY THANKS!  None of the other addresses have a Address.worker, they just have their VTC address.  Should i just remove the worker or is this OK.  Is there a different way alwayshashing wants workers?

Thanks , I will order one or two this week.