<<  >> (p.502)
    Author Topic: [4+ EH] Slush Pool (slushpool.com); Overt AsicBoost; World First Mining Pool  (Read 4383215 times)

    • vs3
    Hero Member
    *****
    Offline Offline

    Activity: 622
    Merit: 500


    View Profile WWW
    June 12, 2013, 04:59:08 PM
     #10021
    Quote from: Tamis on June 12, 2013, 02:20:39 PM
    Quote from: BTCvFiat on June 12, 2013, 02:14:46 PM
    Quote from: Tamis on June 12, 2013, 01:13:49 PM
    Quote from: BTCvFiat on June 12, 2013, 01:03:06 PM
    Throwing 250-300 mhash/s

    Is that with a HD 5850 ?

    yes, I'd either be mining or doing other stuff so overall electrical usage is negligible.

    My HD5850 started stock at 260mh/s and is now running at 391mh/s Wink
    Oc it !

    Out of curiosity - how did you get the 5850 to 391MH/s? What's the voltage and GPU frequencies? And what software do you use and how many watts does it use?
    I've found mine to be quite stable when undervoltaged to 0.975-0.987 and GPU at 775-785MHz (which results in 305-308MH/s). On the good side - power usage is pretty decent - 675W with 5 of them mining.
    NanoFury - Open Source Project | [GB] NanoFury NF1

  • TObject
    Member
    **
    Offline Offline

    Activity: 91
    Merit: 10


    View Profile
    June 12, 2013, 05:02:47 PM
     #10022
    Quote from: PrintMule on June 12, 2013, 04:38:07 PM
    Quote from: Trongersoll on June 12, 2013, 02:07:16 PM
    Odd that even though our hash rate is up, we don't seem to be finding blocks much faster.

    I get that feeling too, it's like extra hash power only dwindles rewards, while not adding speed.
    Recentlywe dropped back to 12th/s and luck was very good.

    It's like those latest additions are doing empty work pretend to be working.

    Yes, I know that sounds dumb, but still.

    Is it possible for someone to submit fake shares? The pool does not check every single share for validity, or does it?

  • Trongersoll
    Hero Member
    *****
    Offline Offline

    Activity: 490
    Merit: 501



    View Profile
    June 12, 2013, 05:06:21 PM
     #10023
    Quote from: TObject on June 12, 2013, 05:02:47 PM
    Quote from: PrintMule on June 12, 2013, 04:38:07 PM
    Quote from: Trongersoll on June 12, 2013, 02:07:16 PM
    Odd that even though our hash rate is up, we don't seem to be finding blocks much faster.

    I get that feeling too, it's like extra hash power only dwindles rewards, while not adding speed.
    Recentlywe dropped back to 12th/s and luck was very good.

    It's like those latest additions are doing empty work pretend to be working.

    Yes, I know that sounds dumb, but still.

    Is it possible for someone to submit fake shares? The pool does not check every single share for validity, or does it?

    The pool would have to check every share because in software anything can be done on the mining end.

  • KNK
    Hero Member
    *****
    Offline Offline

    Activity: 692
    Merit: 502


    View Profile
    June 12, 2013, 05:07:39 PM
     #10024
    Quote from: TObject on June 12, 2013, 05:02:47 PM
    Is it possible for someone to submit fake shares? The pool does not check every single share for validity, or does it?

    Only Slush can confirm that, but 99.99% guarantee, that each one is checked and not only if it's valid, but also if its duplicate or you can just send the same share twice or send diff 1 share while pretending to mine at diff 5
    Mega Crypto Polis - www.MegaCryptoPolis.com
    BTC tips: 1KNK1akhpethhtcyhKTF2d3PWTQDUWUzHE

  • Lucko
    Hero Member
    *****
    Offline Offline

    Activity: 826
    Merit: 1000



    View Profile
    June 12, 2013, 05:22:39 PM
     #10025
    Quote from: vs3 on June 12, 2013, 04:59:08 PM
    Quote from: Tamis on June 12, 2013, 02:20:39 PM
    Quote from: BTCvFiat on June 12, 2013, 02:14:46 PM
    Quote from: Tamis on June 12, 2013, 01:13:49 PM
    Quote from: BTCvFiat on June 12, 2013, 01:03:06 PM
    Throwing 250-300 mhash/s

    Is that with a HD 5850 ?

    yes, I'd either be mining or doing other stuff so overall electrical usage is negligible.

    My HD5850 started stock at 260mh/s and is now running at 391mh/s Wink
    Oc it !

    Out of curiosity - how did you get the 5850 to 391MH/s? What's the voltage and GPU frequencies? And what software do you use and how many watts does it use?
    I've found mine to be quite stable when undervoltaged to 0.975-0.987 and GPU at 775-785MHz (which results in 305-308MH/s). On the good side - power usage is pretty decent - 675W with 5 of them mining.
    This can be easily done at stock voltage mem@150 core@840. You only need to replace cooling paste with Arctic silver. Usage is about 180... And I have tested your settings. I think you need batter kill-a-watt. I can't make it run with the usage that you reported last time... It uses about 120W+. If I remember correct you reported 85W.

  • Tamis
    Sr. Member
    ****
    Offline Offline

    Activity: 476
    Merit: 250



    View Profile
    June 12, 2013, 05:35:53 PM
     #10026
    Quote from: vs3 on June 12, 2013, 04:59:08 PM
    Out of curiosity - how did you get the 5850 to 391MH/s? What's the voltage and GPU frequencies? And what software do you use and how many watts does it use?
    I've found mine to be quite stable when undervoltaged to 0.975-0.987 and GPU at 775-785MHz (which results in 305-308MH/s). On the good side - power usage is pretty decent - 675W with 5 of them mining.

    Voltage : 1.199v
    gpu : 950
    mem : 350 (this is the "sweet spot" higher or lower will not give as much mh/s)

    It's a sapphire and I use Trixx.

    I just lowered it a bit at 381mh/s with a voltage of 1.162 and gpu at 920 to have less fan noise. I have instruments to measure the power usage but i'm at work so I don't care Wink

    Quote from: Lucko on June 12, 2013, 05:22:39 PM

    This can be easily done at stock voltage mem@150 core@840. You only need to replace cooling paste with Arctic silver. Usage is about 180... And I have tested your settings. I think you need batter kill-a-watt. I can't make it run with the usage that you reported last time... It uses about 120W+. If I remember correct you reported 85W.

    That won't give you 391mh/s at all more like 330.

  • mteachx
    Newbie
    *
    Offline Offline

    Activity: 37
    Merit: 0


    View Profile
    June 12, 2013, 05:38:37 PM
     #10027
    Wow
    9h and 12k go to 17k Ghash/s ?!

    Asic coming, yesyesyes ..

  • vs3
    Hero Member
    *****
    Offline Offline

    Activity: 622
    Merit: 500


    View Profile WWW
    June 12, 2013, 05:57:41 PM
     #10028
    Quote from: Lucko on June 12, 2013, 05:22:39 PM
    Quote from: vs3 on June 12, 2013, 04:59:08 PM
    Quote from: Tamis on June 12, 2013, 02:20:39 PM
    Quote from: BTCvFiat on June 12, 2013, 02:14:46 PM
    Quote from: Tamis on June 12, 2013, 01:13:49 PM
    Quote from: BTCvFiat on June 12, 2013, 01:03:06 PM
    Throwing 250-300 mhash/s

    Is that with a HD 5850 ?

    yes, I'd either be mining or doing other stuff so overall electrical usage is negligible.

    My HD5850 started stock at 260mh/s and is now running at 391mh/s Wink
    Oc it !

    Out of curiosity - how did you get the 5850 to 391MH/s? What's the voltage and GPU frequencies? And what software do you use and how many watts does it use?
    I've found mine to be quite stable when undervoltaged to 0.975-0.987 and GPU at 775-785MHz (which results in 305-308MH/s). On the good side - power usage is pretty decent - 675W with 5 of them mining.
    This can be easily done at stock voltage mem@150 core@840. You only need to replace cooling paste with Arctic silver. Usage is about 180... And I have tested your settings. I think you need batter kill-a-watt. I can't make it run with the usage that you reported last time... It uses about 120W+. If I remember correct you reported 85W.

    Yup - idle wattage (with just 1 video card) is around 180-190W and with all 5 it is around 220-230. On full load it is 660-680 (depending on room temperature) -
    which makes 305MH/s:

    So - my calculations say that it's 90-95W per card currently. (and I had to move them to another room that's not airconditioned so everything is running a bit hotter).
    NanoFury - Open Source Project | [GB] NanoFury NF1

  • Lucko
    Hero Member
    *****
    Offline Offline

    Activity: 826
    Merit: 1000



    View Profile
    June 12, 2013, 06:12:32 PM
     #10029
    Quote from: Tamis on June 12, 2013, 05:35:53 PM
    Quote from: Lucko on June 12, 2013, 05:22:39 PM

    This can be easily done at stock voltage mem@150 core@840. You only need to replace cooling paste with Arctic silver. Usage is about 180... And I have tested your settings. I think you need batter kill-a-watt. I can't make it run with the usage that you reported last time... It uses about 120W+. If I remember correct you reported 85W.

    That won't give you 391mh/s at all more like 330.
    Right you are. I was looking at the wrong cart it is 940...

  • Lucko
    Hero Member
    *****
    Offline Offline

    Activity: 826
    Merit: 1000



    View Profile
    June 12, 2013, 06:21:24 PM
     #10030
    Quote from: vs3 on June 12, 2013, 05:57:41 PM
    Yup - idle wattage (with just 1 video card) is around 180-190W and with all 5 it is around 220-230. On full load it is 660-680 (depending on room temperature) -
    which makes 305MH/s:

    So - my calculations say that it's 90-95W per card currently. (and I had to move them to another room that's not airconditioned so everything is running a bit hotter).
    Can't even come in a neighborhood with the same settings... No idea why... One of the kill-a-watt is wrong. And based on 5850 specifications I believe it is yours. It is reported that it runs with about 150 watts on full. So undervolt and underclock of mem could save you 60 watts but you are overclocking GPU. So I don't think you can get it to save over 35% of the power that it is using stock. Is your kill-a-watt capable of detecting phase shift? EDIT: Sometimes this completely throws of this home meters.

    EDIT: But it is a different design but still made by ATI.

  • sundownz
    Hero Member
    *****
    Offline Offline

    Activity: 714
    Merit: 512


    View Profile WWW
    June 12, 2013, 06:28:23 PM
     #10031
    At least it's not just me that dropped a ton on reward -- dropped hard above the dashed line with same computing power online :

    18537    2013-06-12 18:14:20    0:31:26    7824718    1736    0.00477778    241166    25.21770020    99 confirmations left
    18536    2013-06-12 17:42:54    0:14:06    3514293    755    0.00504809    241163    25.10620000    96 confirmations left
    18535    2013-06-12 17:28:48    0:01:19    316620    64    0.00490622    241160    25.04380000    93 confirmations left
    18534    2013-06-12 17:27:29    0:28:33    7000210    1542    0.00540747    241159    25.01394980    92 confirmations left
    18533    2013-06-12 16:58:56    2:50:56    42352577    8987    0.00587100    241150    25.39820944    83 confirmations left
    18532    2013-06-12 14:08:00    1:24:34    20677521    4569    0.00565038    241124    25.54674000    57 confirmations left
    18531    2013-06-12 12:43:26    3:23:57    44489992    10803    0.00529185    241115    25.10480000    48 confirmations left
    ----------
    18530    2013-06-12 09:19:29    0:53:55    9964643    2907    0.00739917    241092    25.07820010    25 confirmations left
    18529    2013-06-12 08:25:34    0:15:30    2867723    824    0.00701766    241080    25.24704812    13 confirmations left
    18528    2013-06-12 08:10:04    0:23:59    4440359    1201    0.00672537    241076    25.14980000    9 confirmations left
    18527    2013-06-12 07:46:05    0:26:42    4758169    1335    0.00710068    241071    25.08490896    4 confirmations left
    18526    2013-06-12 07:19:23    3:52:04    43429961    12900    0.00737476    241068    25.33501327    1 confirmations left
    18525    2013-06-12 03:27:19    0:39:17    7372985    2189    0.00754409    241039    25.12242555    confirmed
    18524    2013-06-12 02:48:02    4:42:35    53459272    15894    0.00751858    241033    25.03670000    confirmed
    18523    2013-06-11 22:05:27    1:15:25    14487253    4247    0.00797096    240997    25.52886700    confirmed
    18522    2013-06-11 20:50:02    0:42:22    8204486    2298    0.00732816    240990    25.41680000    confirmed

    Well... at least I'll be tripling my Hash Rate over the next week with hardware I already bought. May sell the GPUs sooner than expected if it drops this fast again.
    For security, your account has been locked. Email acctcomp15@theymos.e4ward.com

  • bspurloc
    Hero Member
    *****
    Offline Offline

    Activity: 569
    Merit: 500


    View Profile
    June 12, 2013, 06:38:35 PM
     #10032
    Quote from: Lucko on June 12, 2013, 05:22:39 PM
    Quote from: vs3 on June 12, 2013, 04:59:08 PM
    Quote from: Tamis on June 12, 2013, 02:20:39 PM
    Quote from: BTCvFiat on June 12, 2013, 02:14:46 PM
    Quote from: Tamis on June 12, 2013, 01:13:49 PM
    Quote from: BTCvFiat on June 12, 2013, 01:03:06 PM
    Throwing 250-300 mhash/s

    Is that with a HD 5850 ?

    yes, I'd either be mining or doing other stuff so overall electrical usage is negligible.

    My HD5850 started stock at 260mh/s and is now running at 391mh/s Wink
    Oc it !

    Out of curiosity - how did you get the 5850 to 391MH/s? What's the voltage and GPU frequencies? And what software do you use and how many watts does it use?
    I've found mine to be quite stable when undervoltaged to 0.975-0.987 and GPU at 775-785MHz (which results in 305-308MH/s). On the good side - power usage is pretty decent - 675W with 5 of them mining.
    This can be easily done at stock voltage mem@150 core@840. You only need to replace cooling paste with Arctic silver. Usage is about 180... And I have tested your settings. I think you need batter kill-a-watt. I can't make it run with the usage that you reported last time... It uses about 120W+. If I remember correct you reported 85W.

    aka STALE/INVALID shares in your miner client

  • bspurloc
    Hero Member
    *****
    Offline Offline

    Activity: 569
    Merit: 500


    View Profile
    June 12, 2013, 06:45:42 PM
     #10033
    Quote from: Tamis on June 12, 2013, 05:35:53 PM
    Quote from: vs3 on June 12, 2013, 04:59:08 PM
    Out of curiosity - how did you get the 5850 to 391MH/s? What's the voltage and GPU frequencies? And what software do you use and how many watts does it use?
    I've found mine to be quite stable when undervoltaged to 0.975-0.987 and GPU at 775-785MHz (which results in 305-308MH/s). On the good side - power usage is pretty decent - 675W with 5 of them mining.

    Voltage : 1.199v
    gpu : 950
    mem : 350 (this is the "sweet spot" higher or lower will not give as much mh/s)

    It's a sapphire and I use Trixx.

    I just lowered it a bit at 381mh/s with a voltage of 1.162 and gpu at 920 to have less fan noise. I have instruments to measure the power usage but i'm at work so I don't care Wink

    Quote from: Lucko on June 12, 2013, 05:22:39 PM

    This can be easily done at stock voltage mem@150 core@840. You only need to replace cooling paste with Arctic silver. Usage is about 180... And I have tested your settings. I think you need batter kill-a-watt. I can't make it run with the usage that you reported last time... It uses about 120W+. If I remember correct you reported 85W.

    That won't give you 391mh/s at all more like 330.

    I am wondering how you get the lower memory to work.... every time I try to decrease the memory in WINDOWS machines the AMD CCC app freaks out and puts the video cards to their default memory settings refusing to let me change it anymore. unless I use TRIXX but after using Trixx for awhile the AMD CCC App gets totally lost as to what the card is doing.
    Like presently one machine that I was using Trixx on the AMD CCC app has no idea what the fan speed and temp of the card is anymore it doesnt display it. on another one it display them but has wrong value. another one I completely removed all amd drivers because the Trixx utility and the amd ccc app wouldnt control the card anymore...

  • bspurloc
    Hero Member
    *****
    Offline Offline

    Activity: 569
    Merit: 500


    View Profile
    June 12, 2013, 06:47:48 PM
     #10034
    Quote from: vs3 on June 12, 2013, 05:57:41 PM
    Quote from: Lucko on June 12, 2013, 05:22:39 PM
    Quote from: vs3 on June 12, 2013, 04:59:08 PM
    Quote from: Tamis on June 12, 2013, 02:20:39 PM
    Quote from: BTCvFiat on June 12, 2013, 02:14:46 PM
    Quote from: Tamis on June 12, 2013, 01:13:49 PM
    Quote from: BTCvFiat on June 12, 2013, 01:03:06 PM
    Throwing 250-300 mhash/s

    Is that with a HD 5850 ?

    yes, I'd either be mining or doing other stuff so overall electrical usage is negligible.

    My HD5850 started stock at 260mh/s and is now running at 391mh/s Wink
    Oc it !

    Out of curiosity - how did you get the 5850 to 391MH/s? What's the voltage and GPU frequencies? And what software do you use and how many watts does it use?
    I've found mine to be quite stable when undervoltaged to 0.975-0.987 and GPU at 775-785MHz (which results in 305-308MH/s). On the good side - power usage is pretty decent - 675W with 5 of them mining.
    This can be easily done at stock voltage mem@150 core@840. You only need to replace cooling paste with Arctic silver. Usage is about 180... And I have tested your settings. I think you need batter kill-a-watt. I can't make it run with the usage that you reported last time... It uses about 120W+. If I remember correct you reported 85W.

    Yup - idle wattage (with just 1 video card) is around 180-190W and with all 5 it is around 220-230. On full load it is 660-680 (depending on room temperature) -
    which makes 305MH/s:

    So - my calculations say that it's 90-95W per card currently. (and I had to move them to another room that's not airconditioned so everything is running a bit hotter).

    that is a dell power supply..... hrmmm u pulling 600+ watts means that isnt a 550watt dell.. what wattage is that?!?! I didnt know Dell made larger than 550! nice

  • vs3
    Hero Member
    *****
    Offline Offline

    Activity: 622
    Merit: 500


    View Profile WWW
    June 12, 2013, 06:57:43 PM
     #10035
    Quote from: Lucko on June 12, 2013, 06:21:24 PM
    Quote from: vs3 on June 12, 2013, 05:57:41 PM
    Yup - idle wattage (with just 1 video card) is around 180-190W and with all 5 it is around 220-230. On full load it is 660-680 (depending on room temperature) -
    So - my calculations say that it's 90-95W per card currently. (and I had to move them to another room that's not airconditioned so everything is running a bit hotter).
    Can't even come in a neighborhood with the same settings... No idea why... One of the kill-a-watt is wrong. And based on 5850 specifications I believe it is yours. It is reported that it runs with about 150 watts on full. So undervolt and underclock of mem could save you 60 watts but you are overclocking GPU. So I don't think you can get it to save over 35% of the power that it is using stock. Is your kill-a-watt capable of detecting phase shift? EDIT: Sometimes this completely throws of this home meters.

    EDIT: But it is a different design but still made by ATI.

    Well - what I see roughly matches my electricity bill so I have no reason to suspect the kill-a-watt. And I am merely stating what I'm seeing.

    By the way - undervoltaging the card does have a dramatic effect on power usage! Changes between 1.000 and 0.975 result in 10-15W on some of the cards. And downclocking the memory is important too as it results in noticeably less heat.
    NanoFury - Open Source Project | [GB] NanoFury NF1

  • vs3
    Hero Member
    *****
    Offline Offline

    Activity: 622
    Merit: 500


    View Profile WWW
    June 12, 2013, 07:01:32 PM
     #10036
    Quote from: bspurloc on June 12, 2013, 06:47:48 PM
    that is a dell power supply..... hrmmm u pulling 600+ watts means that isnt a 550watt dell.. what wattage is that?!?! I didnt know Dell made larger than 550! nice

    That's a Dell T7500 - the PSU is 1000W (although in some places they claim 1100W). I had a leftover motherboard with processor and PSU .. so I just made a cage for it Smiley
    It's a very nice motherboard - 5x PCIe x16 slots (2x16, 2x8 and 1x4)
    NanoFury - Open Source Project | [GB] NanoFury NF1

  • ewitte
    Member
    **
    Offline Offline

    Activity: 98
    Merit: 10


    View Profile
    June 12, 2013, 07:27:11 PM
     #10037
    Quote from: vs3 on June 12, 2013, 07:01:32 PM
    Quote from: bspurloc on June 12, 2013, 06:47:48 PM
    that is a dell power supply..... hrmmm u pulling 600+ watts means that isnt a 550watt dell.. what wattage is that?!?! I didnt know Dell made larger than 550! nice

    That's a Dell T7500 - the PSU is 1000W (although in some places they claim 1100W). I had a leftover motherboard with processor and PSU .. so I just made a cage for it Smiley
    It's a very nice motherboard - 5x PCIe x16 slots (2x16, 2x8 and 1x4)

    My T7600 says 1200W but then goes into exclusions it could also be 1100W or 1000W depending on the power input source.  I believe 1200W is only 230V.
    Donations
    BTC - 13Lgy6fb4d3nSYEf2nkgBgyBkkhPw8zkPd
    LTC - LegzRwyc2Xhu8cqvaW2jwRrqSnhyaYU6gZ

  • Lucko
    Hero Member
    *****
    Offline Offline

    Activity: 826
    Merit: 1000



    View Profile
    June 12, 2013, 07:58:01 PM
     #10038
    Quote from: bspurloc on June 12, 2013, 06:45:42 PM
    I am wondering how you get the lower memory to work.... every time I try to decrease the memory in WINDOWS machines the AMD CCC app freaks out and puts the video cards to their default memory settings refusing to let me change it anymore. unless I use TRIXX but after using Trixx for awhile the AMD CCC App gets totally lost as to what the card is doing.
    Like presently one machine that I was using Trixx on the AMD CCC app has no idea what the fan speed and temp of the card is anymore it doesnt display it. on another one it display them but has wrong value. another one I completely removed all amd drivers because the Trixx utility and the amd ccc app wouldnt control the card anymore...
    CGminer... --gpu-memclock setting. And it is not 150 but 300. I was looking at the wrong one(5970 black edition)... It also do 390 per core... So 780 total Smiley Undervolt to 1.00 since I can't get more out of it at stock voltage. No idea why but driver crashes... And for some reason the second core can be turned on only if it is above 55C. If below it crashes the driver... If anyone has idea why please let me know.

  • Lucko
    Hero Member
    *****
    Offline Offline

    Activity: 826
    Merit: 1000



    View Profile
    June 12, 2013, 08:02:58 PM
     #10039
    Quote from: bspurloc on June 12, 2013, 06:38:35 PM
    Quote from: Lucko on June 12, 2013, 05:22:39 PM
    EDITED to fix two errors:
    This can be easily done at stock voltage mem@300 core@940. You only need to replace cooling paste with Arctic silver. Usage is about 180... And I have tested your settings. I think you need batter kill-a-watt. I can't make it run with the usage that you reported last time... It uses about 120W+. If I remember correct you reported 85W.

    aka STALE/INVALID shares in your miner client
    It currently running for 10 hours. Non reported... And no HW errors.

  • bspurloc
    Hero Member
    *****
    Offline Offline

    Activity: 569
    Merit: 500


    View Profile
    June 12, 2013, 08:25:22 PM
     #10040
    Quote from: Lucko on June 12, 2013, 07:58:01 PM
    Quote from: bspurloc on June 12, 2013, 06:45:42 PM
    I am wondering how you get the lower memory to work.... every time I try to decrease the memory in WINDOWS machines the AMD CCC app freaks out and puts the video cards to their default memory settings refusing to let me change it anymore. unless I use TRIXX but after using Trixx for awhile the AMD CCC App gets totally lost as to what the card is doing.
    Like presently one machine that I was using Trixx on the AMD CCC app has no idea what the fan speed and temp of the card is anymore it doesnt display it. on another one it display them but has wrong value. another one I completely removed all amd drivers because the Trixx utility and the amd ccc app wouldnt control the card anymore...
    CGminer... --gpu-memclock setting. And it is not 150 but 300. I was looking at the wrong one(5970 black edition)... It also do 390 per core... So 780 total Smiley Undervolt to 1.00 since I can't get more out of it at stock voltage. No idea why but driver crashes... And for some reason the second core can be turned on only if it is above 55C. If below it crashes the driver... If anyone has idea why please let me know.

    so command line cgminer lets you adjust the GPU and memclock? sigh wish I knew this over a month ago!
    Pages: « 1 ... 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 [502] 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 ... 1154 »
      Print  
Page 501
Viewing Page: 502

IRLBTC™ © 2025 IRLBTC.com