<<  >> (p.13)
    Author Topic: [ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9  (Read 148879 times)

    • MagicSmoker
    Full Member
    ***
    Offline Offline

    Activity: 420
    Merit: 184



    View Profile
    January 09, 2018, 02:28:14 PM
     #241
    Quote from: Andrey09 on January 09, 2018, 02:12:41 PM
    What faster Bminer 5.0 or DSTM 0.5.8 ? Someone make compare with data from pool ?

    I was getting around 305 Sols/s per GTX 1060 3GB using dstm 0.5.7 (didn't try 0.5.8 because some people were reporting issues with it) and now with bminer 5.0 I am getting around 310 Sols/s per GPU, or 1.6% improvement. Modest, but worthwhile. Mind you, it's only been running for about 1 hour at this point.

    The -no-timestamps switch is a step in the right direction, but I still want to see cumulative mining time.

  • NameTaken
    Hero Member
    *****
    Offline Offline

    Activity: 630
    Merit: 502


    View Profile
    January 09, 2018, 02:43:11 PM
     #242
    Quote from: MagicSmoker on January 09, 2018, 02:28:14 PM
    Quote from: Andrey09 on January 09, 2018, 02:12:41 PM
    What faster Bminer 5.0 or DSTM 0.5.8 ? Someone make compare with data from pool ?

    I was getting around 305 Sols/s per GTX 1060 3GB using dstm 0.5.7 (didn't try 0.5.8 because some people were reporting issues with it) and now with bminer 5.0 I am getting around 310 Sols/s per GPU, or 1.6% improvement. Modest, but worthwhile. Mind you, it's only been running for about 1 hour at this point.

    The -no-timestamps switch is a step in the right direction, but I still want to see cumulative mining time.


    Using systemd I can run

    Code:
    systemctl status bminer

    to display uptime, status and logs while

    Code:
    systemctl show bminer

    dumps all the details I could want

    Code:
    Type=simple
    Restart=always
    NotifyAccess=none
    RestartUSec=10s
    TimeoutStartUSec=1min 30s
    TimeoutStopUSec=10s
    RuntimeMaxUSec=infinity
    WatchdogUSec=0
    WatchdogTimestamp=mar 2018-01-09 02:46:22 PST
    WatchdogTimestampMonotonic=291102220341
    FailureAction=none
    PermissionsStartOnly=no
    RootDirectoryStartOnly=no
    RemainAfterExit=no
    GuessMainPID=yes
    MainPID=2891
    ControlPID=0
    FileDescriptorStoreMax=0
    NFileDescriptorStore=0
    StatusErrno=0
    Result=success
    ExecMainStartTimestamp=mar 2018-01-09 02:46:22 PST
    ExecMainStartTimestampMonotonic=291102220311
    ExecMainExitTimestampMonotonic=0
    ExecMainPID=2891
    ExecMainCode=0
    ExecMainStatus=0
    ExecStart={ path=/opt/bminer/bminer ; argv[]=/opt/bminer/bminer -no-timestamps -api=0.0.0.0:12345 -uri=stratum://nametaken.44388:miner54@us-west01.miningrigrentals.com:50466 ; ignore_errors=no ; start_time=[mar 2018-01-09 02:46:22 PST] ; stop_time=[n/a] ; pid=2891 ; code=(null) ; status=0/0 }
    ExecReload={ path=/bin/kill ; argv[]=/bin/kill -HUP $MAINPID ; ignore_errors=no ; start_time=[n/a] ; stop_time=[n/a] ; pid=0 ; code=(null) ; status=0/0 }
    Slice=system.slice
    ControlGroup=/system.slice/bminer.service
    MemoryCurrent=18446744073709551615
    CPUUsageNSec=18446744073709551615
    TasksCurrent=18446744073709551615
    Delegate=no
    CPUAccounting=no
    CPUShares=18446744073709551615
    StartupCPUShares=18446744073709551615
    CPUQuotaPerSecUSec=infinity
    BlockIOAccounting=no
    BlockIOWeight=18446744073709551615
    StartupBlockIOWeight=18446744073709551615
    MemoryAccounting=no
    MemoryLimit=18446744073709551615
    DevicePolicy=auto
    TasksAccounting=no
    TasksMax=18446744073709551615
    Environment=DISPLAY=:0
    UMask=0022
    LimitCPU=18446744073709551615
    LimitCPUSoft=18446744073709551615
    LimitFSIZE=18446744073709551615
    LimitFSIZESoft=18446744073709551615
    LimitDATA=18446744073709551615
    LimitDATASoft=18446744073709551615
    LimitSTACK=18446744073709551615
    LimitSTACKSoft=8388608
    LimitCORE=18446744073709551615
    LimitCORESoft=0
    LimitRSS=18446744073709551615
    LimitRSSSoft=18446744073709551615
    LimitNOFILE=4096
    LimitNOFILESoft=1024
    LimitAS=18446744073709551615
    LimitASSoft=18446744073709551615
    LimitNPROC=7286
    LimitNPROCSoft=7286
    LimitMEMLOCK=65536
    LimitMEMLOCKSoft=65536
    LimitLOCKS=18446744073709551615
    LimitLOCKSSoft=18446744073709551615
    LimitSIGPENDING=7286
    LimitSIGPENDINGSoft=7286
    LimitMSGQUEUE=819200
    LimitMSGQUEUESoft=819200
    LimitNICE=0
    LimitNICESoft=0
    LimitRTPRIO=0
    LimitRTPRIOSoft=0
    LimitRTTIME=18446744073709551615
    LimitRTTIMESoft=18446744073709551615
    OOMScoreAdjust=0
    Nice=19
    IOScheduling=0
    CPUSchedulingPolicy=0
    CPUSchedulingPriority=0
    TimerSlackNSec=50000
    CPUSchedulingResetOnFork=no
    NonBlocking=no
    StandardInput=null
    StandardOutput=journal
    StandardError=inherit
    TTYReset=no
    TTYVHangup=no
    TTYVTDisallocate=no
    SyslogPriority=30
    SyslogLevelPrefix=yes
    SyslogLevel=6
    SyslogFacility=3
    SecureBits=0
    CapabilityBoundingSet=18446744073709551615
    AmbientCapabilities=0
    User=1000
    MountFlags=0
    PrivateTmp=no
    PrivateNetwork=no
    PrivateDevices=no
    ProtectHome=yes
    ProtectSystem=full
    SameProcessGroup=no
    UtmpMode=init
    IgnoreSIGPIPE=yes
    NoNewPrivileges=no
    SystemCallErrorNumber=0
    RuntimeDirectoryMode=0755
    KillMode=mixed
    KillSignal=15
    SendSIGKILL=yes
    SendSIGHUP=no
    Id=bminer.service
    Names=bminer.service
    Requires=system.slice sysinit.target
    Wants=lightdm.service network-online.target
    WantedBy=multi-user.target
    Conflicts=ccminer.service dstm.service shutdown.target ewbf.service optiminer.service
    ConflictedBy=dstm.service
    Before=shutdown.target multi-user.target
    After=lightdm.service system.slice sysinit.target network-online.target systemd-journald.socket basic.target
    Description=Bminer Service
    LoadState=loaded
    ActiveState=active
    SubState=running
    FragmentPath=/etc/systemd/system/bminer.service
    UnitFileState=enabled
    UnitFilePreset=enabled
    StateChangeTimestamp=mar 2018-01-09 02:46:22 PST
    StateChangeTimestampMonotonic=291102220342
    InactiveExitTimestamp=mar 2018-01-09 02:46:18 PST
    InactiveExitTimestampMonotonic=291098705658
    ActiveEnterTimestamp=mar 2018-01-09 02:46:22 PST
    ActiveEnterTimestampMonotonic=291102220342
    ActiveExitTimestamp=mar 2018-01-09 02:46:17 PST
    ActiveExitTimestampMonotonic=291097348517
    InactiveEnterTimestamp=mar 2018-01-09 02:46:18 PST
    InactiveEnterTimestampMonotonic=291097980346
    CanStart=yes
    CanStop=yes
    CanReload=yes
    CanIsolate=no
    StopWhenUnneeded=no
    RefuseManualStart=no
    RefuseManualStop=no
    AllowIsolate=no
    DefaultDependencies=yes
    OnFailureJobMode=replace
    IgnoreOnIsolate=no
    NeedDaemonReload=no
    JobTimeoutUSec=infinity
    JobTimeoutAction=none
    ConditionResult=yes
    AssertResult=yes
    ConditionTimestamp=mar 2018-01-09 02:46:18 PST
    ConditionTimestampMonotonic=291098705207
    AssertTimestamp=mar 2018-01-09 02:46:18 PST
    AssertTimestampMonotonic=291098705207
    Transient=no
    StartLimitInterval=10000000
    StartLimitBurst=5
    StartLimitAction=none

  • wetblanket
    Jr. Member
    *
    Offline Offline

    Activity: 95
    Merit: 2


    View Profile
    January 09, 2018, 03:27:16 PM
     #243
    EDIT: Note that when this happens, I have to reboot the rig via the power button; `sudo reboot` just causes the machine to hang.

    bminer has been chugging along for a couple of days now, but this morning I woke up to see the following. Any tips?

    Code:
    [INFO] [2018-01-09T02:17:56-08:00] [GPU 0] Speed: 508.98 Sol/s 272.31 Nonce/s
    [INFO] [2018-01-09T02:17:56-08:00] [GPU 1] Speed: 508.21 Sol/s 272.46 Nonce/s
    [INFO] [2018-01-09T02:17:57-08:00] [GPU 2] Speed: 502.58 Sol/s 269.03 Nonce/s
    [INFO] [2018-01-09T02:17:57-08:00] [GPU 3] Speed: 505.43 Sol/s 269.04 Nonce/s
    [INFO] [2018-01-09T02:17:58-08:00] [GPU 4] Speed: 504.83 Sol/s 270.48 Nonce/s
    [INFO] [2018-01-09T02:17:59-08:00] [GPU 5] Speed: 506.09 Sol/s 271.16 Nonce/s
    [INFO] [2018-01-09T02:18:02-08:00] Accepted share #18630
    [INFO] [2018-01-09T02:18:02-08:00] Accepted share #18631
    [WARN] [2018-01-09T02:18:04-08:00] Get error: End of file, resetting in 5 seconds
    [INFO] [2018-01-09T02:18:10-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:10-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:10-08:00] Set nonce to e80000400000000000000000400000e9
    [INFO] [2018-01-09T02:18:10-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:10-08:00] Received new job 1
    [INFO] [2018-01-09T02:18:10-08:00] Authorized
    [INFO] [2018-01-09T02:18:11-08:00] Accepted share #18632
    [INFO] [2018-01-09T02:18:12-08:00] Accepted share #18633
    [INFO] [2018-01-09T02:18:13-08:00] Accepted share #18634
    [WARN] [2018-01-09T02:18:18-08:00] Get error: End of file, resetting in 5 seconds
    [INFO] [2018-01-09T02:18:19-08:00] Total 3036.12 Sol/s 1624.48 Nonce/s Accepted shares 18556 Rejected shares 67
    [INFO] [2018-01-09T02:18:23-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:24-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:24-08:00] Set nonce to f20100380000000000000000380001f3
    [INFO] [2018-01-09T02:18:24-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:24-08:00] Received new job 1
    [INFO] [2018-01-09T02:18:24-08:00] Authorized
    [INFO] [2018-01-09T02:18:24-08:00] Accepted share #18637
    [WARN] [2018-01-09T02:18:25-08:00] Get error: End of file, resetting in 5 seconds
    [INFO] [2018-01-09T02:18:26-08:00] [GPU 0] Speed: 507.86 Sol/s 272.23 Nonce/s
    [INFO] [2018-01-09T02:18:26-08:00] [GPU 1] Speed: 509.26 Sol/s 272.34 Nonce/s
    [INFO] [2018-01-09T02:18:27-08:00] [GPU 2] Speed: 502.05 Sol/s 268.92 Nonce/s
    [INFO] [2018-01-09T02:18:27-08:00] [GPU 3] Speed: 507.34 Sol/s 269.16 Nonce/s
    [INFO] [2018-01-09T02:18:28-08:00] [GPU 4] Speed: 506.18 Sol/s 270.44 Nonce/s
    [INFO] [2018-01-09T02:18:29-08:00] [GPU 5] Speed: 508.35 Sol/s 271.12 Nonce/s
    [WARN] [2018-01-09T02:18:30-08:00] Connection failed due to Broken pipe, retrying in 5 seconds
    [INFO] [2018-01-09T02:18:31-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:35-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:35-08:00] Set nonce to b80700780000000000000000780007b9
    [INFO] [2018-01-09T02:18:35-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:35-08:00] Received new job 8a
    [WARN] [2018-01-09T02:18:35-08:00] Get error: Bad file descriptor, resetting in 5 seconds
    [INFO] [2018-01-09T02:18:36-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:40-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:40-08:00] Set nonce to 98f9ff17000000000000000017fff997
    [INFO] [2018-01-09T02:18:40-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:40-08:00] Received new job 7c
    [INFO] [2018-01-09T02:18:40-08:00] Received new job 7d
    [WARN] [2018-01-09T02:18:40-08:00] Rejected share #18641 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:40-08:00] Rejected share #18642 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:40-08:00] Rejected share #18643 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:40-08:00] Get error: Bad file descriptor, resetting in 5 seconds
    [INFO] [2018-01-09T02:18:41-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:45-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:45-08:00] Set nonce to ca0100680000000000000000680001cb
    [INFO] [2018-01-09T02:18:45-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:45-08:00] Received new job 1
    [WARN] [2018-01-09T02:18:45-08:00] Rejected share #18644 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:45-08:00] Rejected share #18645 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:45-08:00] Rejected share #18646 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:46-08:00] Miner died! It will be restarted soon...
    [INFO] [2018-01-09T02:18:52-08:00] Bminer: When Crypto-mining Made Fast (v4.0.0-433ffb1)
    [INFO] [2018-01-09T02:18:52-08:00] Checking updates
    [INFO] [2018-01-09T02:18:52-08:00] Starting miner on devices [0 1 2 3 4 5]
    [INFO] [2018-01-09T02:18:53-08:00] Starting miner on device 0...
    [INFO] [2018-01-09T02:18:53-08:00] [D0] GPU check watchdog has started
    [INFO] [2018-01-09T02:18:53-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:53-08:00] Started miner on device 0
    [INFO] [2018-01-09T02:18:53-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:53-08:00] Set nonce to 9efbff6f00000000000000006ffffb9d
    [INFO] [2018-01-09T02:18:53-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:53-08:00] Received new job 1
    [INFO] [2018-01-09T02:18:53-08:00] Starting miner on device 1...
    [INFO] [2018-01-09T02:18:53-08:00] [D1] GPU check watchdog has started
    [INFO] [2018-01-09T02:18:53-08:00] Authorized
    [INFO] [2018-01-09T02:19:23-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [INFO] [2018-01-09T02:19:35-08:00] Received new job 2
    [INFO] [2018-01-09T02:19:53-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [INFO] [2018-01-09T02:19:59-08:00] Received new job 3
    [INFO] [2018-01-09T02:20:23-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [INFO] [2018-01-09T02:20:53-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [INFO] [2018-01-09T02:20:53-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [INFO] [2018-01-09T02:21:23-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [FATA] [2018-01-09T02:21:53-08:00] Irrecoverable errors from miner in GPU 0: GPU hang detected
    Improve mining pool share/hash rates with the aiostratum-proxy (https://bt.irlbtc.com/view/3179895) stratum mining proxy.

  • hav
    Newbie
    *
    Offline Offline

    Activity: 16
    Merit: 0


    View Profile
    January 09, 2018, 03:29:03 PM
     #244
    Quote from: wetblanket on January 09, 2018, 03:27:16 PM
    bminer has been chugging along for a couple of days now, but this morning I woke up to see the following. Any tips?

    Code:
    [INFO] [2018-01-09T02:17:56-08:00] [GPU 0] Speed: 508.98 Sol/s 272.31 Nonce/s
    [INFO] [2018-01-09T02:17:56-08:00] [GPU 1] Speed: 508.21 Sol/s 272.46 Nonce/s
    [INFO] [2018-01-09T02:17:57-08:00] [GPU 2] Speed: 502.58 Sol/s 269.03 Nonce/s
    [INFO] [2018-01-09T02:17:57-08:00] [GPU 3] Speed: 505.43 Sol/s 269.04 Nonce/s
    [INFO] [2018-01-09T02:17:58-08:00] [GPU 4] Speed: 504.83 Sol/s 270.48 Nonce/s
    [INFO] [2018-01-09T02:17:59-08:00] [GPU 5] Speed: 506.09 Sol/s 271.16 Nonce/s
    [INFO] [2018-01-09T02:18:02-08:00] Accepted share #18630
    [INFO] [2018-01-09T02:18:02-08:00] Accepted share #18631
    [WARN] [2018-01-09T02:18:04-08:00] Get error: End of file, resetting in 5 seconds
    [INFO] [2018-01-09T02:18:10-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:10-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:10-08:00] Set nonce to e80000400000000000000000400000e9
    [INFO] [2018-01-09T02:18:10-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:10-08:00] Received new job 1
    [INFO] [2018-01-09T02:18:10-08:00] Authorized
    [INFO] [2018-01-09T02:18:11-08:00] Accepted share #18632
    [INFO] [2018-01-09T02:18:12-08:00] Accepted share #18633
    [INFO] [2018-01-09T02:18:13-08:00] Accepted share #18634
    [WARN] [2018-01-09T02:18:18-08:00] Get error: End of file, resetting in 5 seconds
    [INFO] [2018-01-09T02:18:19-08:00] Total 3036.12 Sol/s 1624.48 Nonce/s Accepted shares 18556 Rejected shares 67
    [INFO] [2018-01-09T02:18:23-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:24-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:24-08:00] Set nonce to f20100380000000000000000380001f3
    [INFO] [2018-01-09T02:18:24-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:24-08:00] Received new job 1
    [INFO] [2018-01-09T02:18:24-08:00] Authorized
    [INFO] [2018-01-09T02:18:24-08:00] Accepted share #18637
    [WARN] [2018-01-09T02:18:25-08:00] Get error: End of file, resetting in 5 seconds
    [INFO] [2018-01-09T02:18:26-08:00] [GPU 0] Speed: 507.86 Sol/s 272.23 Nonce/s
    [INFO] [2018-01-09T02:18:26-08:00] [GPU 1] Speed: 509.26 Sol/s 272.34 Nonce/s
    [INFO] [2018-01-09T02:18:27-08:00] [GPU 2] Speed: 502.05 Sol/s 268.92 Nonce/s
    [INFO] [2018-01-09T02:18:27-08:00] [GPU 3] Speed: 507.34 Sol/s 269.16 Nonce/s
    [INFO] [2018-01-09T02:18:28-08:00] [GPU 4] Speed: 506.18 Sol/s 270.44 Nonce/s
    [INFO] [2018-01-09T02:18:29-08:00] [GPU 5] Speed: 508.35 Sol/s 271.12 Nonce/s
    [WARN] [2018-01-09T02:18:30-08:00] Connection failed due to Broken pipe, retrying in 5 seconds
    [INFO] [2018-01-09T02:18:31-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:35-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:35-08:00] Set nonce to b80700780000000000000000780007b9
    [INFO] [2018-01-09T02:18:35-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:35-08:00] Received new job 8a
    [WARN] [2018-01-09T02:18:35-08:00] Get error: Bad file descriptor, resetting in 5 seconds
    [INFO] [2018-01-09T02:18:36-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:40-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:40-08:00] Set nonce to 98f9ff17000000000000000017fff997
    [INFO] [2018-01-09T02:18:40-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:40-08:00] Received new job 7c
    [INFO] [2018-01-09T02:18:40-08:00] Received new job 7d
    [WARN] [2018-01-09T02:18:40-08:00] Rejected share #18641 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:40-08:00] Rejected share #18642 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:40-08:00] Rejected share #18643 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:40-08:00] Get error: Bad file descriptor, resetting in 5 seconds
    [INFO] [2018-01-09T02:18:41-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:45-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:45-08:00] Set nonce to ca0100680000000000000000680001cb
    [INFO] [2018-01-09T02:18:45-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:45-08:00] Received new job 1
    [WARN] [2018-01-09T02:18:45-08:00] Rejected share #18644 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:45-08:00] Rejected share #18645 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:45-08:00] Rejected share #18646 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:46-08:00] Miner died! It will be restarted soon...
    [INFO] [2018-01-09T02:18:52-08:00] Bminer: When Crypto-mining Made Fast (v4.0.0-433ffb1)
    [INFO] [2018-01-09T02:18:52-08:00] Checking updates
    [INFO] [2018-01-09T02:18:52-08:00] Starting miner on devices [0 1 2 3 4 5]
    [INFO] [2018-01-09T02:18:53-08:00] Starting miner on device 0...
    [INFO] [2018-01-09T02:18:53-08:00] [D0] GPU check watchdog has started
    [INFO] [2018-01-09T02:18:53-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:53-08:00] Started miner on device 0
    [INFO] [2018-01-09T02:18:53-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:53-08:00] Set nonce to 9efbff6f00000000000000006ffffb9d
    [INFO] [2018-01-09T02:18:53-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:53-08:00] Received new job 1
    [INFO] [2018-01-09T02:18:53-08:00] Starting miner on device 1...
    [INFO] [2018-01-09T02:18:53-08:00] [D1] GPU check watchdog has started
    [INFO] [2018-01-09T02:18:53-08:00] Authorized
    [INFO] [2018-01-09T02:19:23-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [INFO] [2018-01-09T02:19:35-08:00] Received new job 2
    [INFO] [2018-01-09T02:19:53-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [INFO] [2018-01-09T02:19:59-08:00] Received new job 3
    [INFO] [2018-01-09T02:20:23-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [INFO] [2018-01-09T02:20:53-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [INFO] [2018-01-09T02:20:53-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [INFO] [2018-01-09T02:21:23-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [FATA] [2018-01-09T02:21:53-08:00] Irrecoverable errors from miner in GPU 0: GPU hang detected

    system reboot should fix that, i switched to DSTM for 10 seconds and tried again with success aswell.
    Might be an overclock issue too, not sure yet

  • hav
    Newbie
    *
    Offline Offline

    Activity: 16
    Merit: 0


    View Profile
    January 09, 2018, 03:37:29 PM
     #245
    https://imgur.com/NIvAdWq
    after some time the miner just hangs and submits no shares...
    Could this be a dev share issue?
    It's not transparant how this happens.

    I'm mining zencash on suprnova.

  • wetblanket
    Jr. Member
    *
    Offline Offline

    Activity: 95
    Merit: 2


    View Profile
    January 09, 2018, 03:40:44 PM
     #246
    Quote from: hav on January 09, 2018, 03:29:03 PM
    Quote from: wetblanket on January 09, 2018, 03:27:16 PM
    bminer has been chugging along for a couple of days now, but this morning I woke up to see the following. Any tips?

    Code:
    [INFO] [2018-01-09T02:17:56-08:00] [GPU 0] Speed: 508.98 Sol/s 272.31 Nonce/s
    [INFO] [2018-01-09T02:17:56-08:00] [GPU 1] Speed: 508.21 Sol/s 272.46 Nonce/s
    [INFO] [2018-01-09T02:17:57-08:00] [GPU 2] Speed: 502.58 Sol/s 269.03 Nonce/s
    [INFO] [2018-01-09T02:17:57-08:00] [GPU 3] Speed: 505.43 Sol/s 269.04 Nonce/s
    [INFO] [2018-01-09T02:17:58-08:00] [GPU 4] Speed: 504.83 Sol/s 270.48 Nonce/s
    [INFO] [2018-01-09T02:17:59-08:00] [GPU 5] Speed: 506.09 Sol/s 271.16 Nonce/s
    [INFO] [2018-01-09T02:18:02-08:00] Accepted share #18630
    [INFO] [2018-01-09T02:18:02-08:00] Accepted share #18631
    [WARN] [2018-01-09T02:18:04-08:00] Get error: End of file, resetting in 5 seconds
    [INFO] [2018-01-09T02:18:10-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:10-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:10-08:00] Set nonce to e80000400000000000000000400000e9
    [INFO] [2018-01-09T02:18:10-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:10-08:00] Received new job 1
    [INFO] [2018-01-09T02:18:10-08:00] Authorized
    [INFO] [2018-01-09T02:18:11-08:00] Accepted share #18632
    [INFO] [2018-01-09T02:18:12-08:00] Accepted share #18633
    [INFO] [2018-01-09T02:18:13-08:00] Accepted share #18634
    [WARN] [2018-01-09T02:18:18-08:00] Get error: End of file, resetting in 5 seconds
    [INFO] [2018-01-09T02:18:19-08:00] Total 3036.12 Sol/s 1624.48 Nonce/s Accepted shares 18556 Rejected shares 67
    [INFO] [2018-01-09T02:18:23-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:24-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:24-08:00] Set nonce to f20100380000000000000000380001f3
    [INFO] [2018-01-09T02:18:24-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:24-08:00] Received new job 1
    [INFO] [2018-01-09T02:18:24-08:00] Authorized
    [INFO] [2018-01-09T02:18:24-08:00] Accepted share #18637
    [WARN] [2018-01-09T02:18:25-08:00] Get error: End of file, resetting in 5 seconds
    [INFO] [2018-01-09T02:18:26-08:00] [GPU 0] Speed: 507.86 Sol/s 272.23 Nonce/s
    [INFO] [2018-01-09T02:18:26-08:00] [GPU 1] Speed: 509.26 Sol/s 272.34 Nonce/s
    [INFO] [2018-01-09T02:18:27-08:00] [GPU 2] Speed: 502.05 Sol/s 268.92 Nonce/s
    [INFO] [2018-01-09T02:18:27-08:00] [GPU 3] Speed: 507.34 Sol/s 269.16 Nonce/s
    [INFO] [2018-01-09T02:18:28-08:00] [GPU 4] Speed: 506.18 Sol/s 270.44 Nonce/s
    [INFO] [2018-01-09T02:18:29-08:00] [GPU 5] Speed: 508.35 Sol/s 271.12 Nonce/s
    [WARN] [2018-01-09T02:18:30-08:00] Connection failed due to Broken pipe, retrying in 5 seconds
    [INFO] [2018-01-09T02:18:31-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:35-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:35-08:00] Set nonce to b80700780000000000000000780007b9
    [INFO] [2018-01-09T02:18:35-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:35-08:00] Received new job 8a
    [WARN] [2018-01-09T02:18:35-08:00] Get error: Bad file descriptor, resetting in 5 seconds
    [INFO] [2018-01-09T02:18:36-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:40-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:40-08:00] Set nonce to 98f9ff17000000000000000017fff997
    [INFO] [2018-01-09T02:18:40-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:40-08:00] Received new job 7c
    [INFO] [2018-01-09T02:18:40-08:00] Received new job 7d
    [WARN] [2018-01-09T02:18:40-08:00] Rejected share #18641 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:40-08:00] Rejected share #18642 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:40-08:00] Rejected share #18643 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:40-08:00] Get error: Bad file descriptor, resetting in 5 seconds
    [INFO] [2018-01-09T02:18:41-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:45-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:45-08:00] Set nonce to ca0100680000000000000000680001cb
    [INFO] [2018-01-09T02:18:45-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:45-08:00] Received new job 1
    [WARN] [2018-01-09T02:18:45-08:00] Rejected share #18644 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:45-08:00] Rejected share #18645 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:45-08:00] Rejected share #18646 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:46-08:00] Miner died! It will be restarted soon...
    [INFO] [2018-01-09T02:18:52-08:00] Bminer: When Crypto-mining Made Fast (v4.0.0-433ffb1)
    [INFO] [2018-01-09T02:18:52-08:00] Checking updates
    [INFO] [2018-01-09T02:18:52-08:00] Starting miner on devices [0 1 2 3 4 5]
    [INFO] [2018-01-09T02:18:53-08:00] Starting miner on device 0...
    [INFO] [2018-01-09T02:18:53-08:00] [D0] GPU check watchdog has started
    [INFO] [2018-01-09T02:18:53-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:53-08:00] Started miner on device 0
    [INFO] [2018-01-09T02:18:53-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:53-08:00] Set nonce to 9efbff6f00000000000000006ffffb9d
    [INFO] [2018-01-09T02:18:53-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:53-08:00] Received new job 1
    [INFO] [2018-01-09T02:18:53-08:00] Starting miner on device 1...
    [INFO] [2018-01-09T02:18:53-08:00] [D1] GPU check watchdog has started
    [INFO] [2018-01-09T02:18:53-08:00] Authorized
    [INFO] [2018-01-09T02:19:23-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [INFO] [2018-01-09T02:19:35-08:00] Received new job 2
    [INFO] [2018-01-09T02:19:53-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [INFO] [2018-01-09T02:19:59-08:00] Received new job 3
    [INFO] [2018-01-09T02:20:23-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [INFO] [2018-01-09T02:20:53-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [INFO] [2018-01-09T02:20:53-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [INFO] [2018-01-09T02:21:23-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [FATA] [2018-01-09T02:21:53-08:00] Irrecoverable errors from miner in GPU 0: GPU hang detected

    system reboot should fix that, i switched to DSTM for 10 seconds and tried again with success aswell.
    Might be an overclock issue too, not sure yet

    Sorry if you saw my edit you'd see this causes trouble with reboots (have to do a hard power down/up via power button). Am mining on zcl suprnova.cc, ubuntu 16.04, this was with bminer 4.0.0.
    Improve mining pool share/hash rates with the aiostratum-proxy (https://bt.irlbtc.com/view/3179895) stratum mining proxy.

  • NameTaken
    Hero Member
    *****
    Offline Offline

    Activity: 630
    Merit: 502


    View Profile
    January 09, 2018, 03:43:18 PM
     #247
    Quote from: wetblanket on January 09, 2018, 03:40:44 PM
    Quote from: hav on January 09, 2018, 03:29:03 PM
    Quote from: wetblanket on January 09, 2018, 03:27:16 PM
    bminer has been chugging along for a couple of days now, but this morning I woke up to see the following. Any tips?

    Code:
    [INFO] [2018-01-09T02:17:56-08:00] [GPU 0] Speed: 508.98 Sol/s 272.31 Nonce/s
    [INFO] [2018-01-09T02:17:56-08:00] [GPU 1] Speed: 508.21 Sol/s 272.46 Nonce/s
    [INFO] [2018-01-09T02:17:57-08:00] [GPU 2] Speed: 502.58 Sol/s 269.03 Nonce/s
    [INFO] [2018-01-09T02:17:57-08:00] [GPU 3] Speed: 505.43 Sol/s 269.04 Nonce/s
    [INFO] [2018-01-09T02:17:58-08:00] [GPU 4] Speed: 504.83 Sol/s 270.48 Nonce/s
    [INFO] [2018-01-09T02:17:59-08:00] [GPU 5] Speed: 506.09 Sol/s 271.16 Nonce/s
    [INFO] [2018-01-09T02:18:02-08:00] Accepted share #18630
    [INFO] [2018-01-09T02:18:02-08:00] Accepted share #18631
    [WARN] [2018-01-09T02:18:04-08:00] Get error: End of file, resetting in 5 seconds
    [INFO] [2018-01-09T02:18:10-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:10-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:10-08:00] Set nonce to e80000400000000000000000400000e9
    [INFO] [2018-01-09T02:18:10-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:10-08:00] Received new job 1
    [INFO] [2018-01-09T02:18:10-08:00] Authorized
    [INFO] [2018-01-09T02:18:11-08:00] Accepted share #18632
    [INFO] [2018-01-09T02:18:12-08:00] Accepted share #18633
    [INFO] [2018-01-09T02:18:13-08:00] Accepted share #18634
    [WARN] [2018-01-09T02:18:18-08:00] Get error: End of file, resetting in 5 seconds
    [INFO] [2018-01-09T02:18:19-08:00] Total 3036.12 Sol/s 1624.48 Nonce/s Accepted shares 18556 Rejected shares 67
    [INFO] [2018-01-09T02:18:23-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:24-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:24-08:00] Set nonce to f20100380000000000000000380001f3
    [INFO] [2018-01-09T02:18:24-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:24-08:00] Received new job 1
    [INFO] [2018-01-09T02:18:24-08:00] Authorized
    [INFO] [2018-01-09T02:18:24-08:00] Accepted share #18637
    [WARN] [2018-01-09T02:18:25-08:00] Get error: End of file, resetting in 5 seconds
    [INFO] [2018-01-09T02:18:26-08:00] [GPU 0] Speed: 507.86 Sol/s 272.23 Nonce/s
    [INFO] [2018-01-09T02:18:26-08:00] [GPU 1] Speed: 509.26 Sol/s 272.34 Nonce/s
    [INFO] [2018-01-09T02:18:27-08:00] [GPU 2] Speed: 502.05 Sol/s 268.92 Nonce/s
    [INFO] [2018-01-09T02:18:27-08:00] [GPU 3] Speed: 507.34 Sol/s 269.16 Nonce/s
    [INFO] [2018-01-09T02:18:28-08:00] [GPU 4] Speed: 506.18 Sol/s 270.44 Nonce/s
    [INFO] [2018-01-09T02:18:29-08:00] [GPU 5] Speed: 508.35 Sol/s 271.12 Nonce/s
    [WARN] [2018-01-09T02:18:30-08:00] Connection failed due to Broken pipe, retrying in 5 seconds
    [INFO] [2018-01-09T02:18:31-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:35-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:35-08:00] Set nonce to b80700780000000000000000780007b9
    [INFO] [2018-01-09T02:18:35-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:35-08:00] Received new job 8a
    [WARN] [2018-01-09T02:18:35-08:00] Get error: Bad file descriptor, resetting in 5 seconds
    [INFO] [2018-01-09T02:18:36-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:40-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:40-08:00] Set nonce to 98f9ff17000000000000000017fff997
    [INFO] [2018-01-09T02:18:40-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:40-08:00] Received new job 7c
    [INFO] [2018-01-09T02:18:40-08:00] Received new job 7d
    [WARN] [2018-01-09T02:18:40-08:00] Rejected share #18641 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:40-08:00] Rejected share #18642 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:40-08:00] Rejected share #18643 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:40-08:00] Get error: Bad file descriptor, resetting in 5 seconds
    [INFO] [2018-01-09T02:18:41-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:45-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:45-08:00] Set nonce to ca0100680000000000000000680001cb
    [INFO] [2018-01-09T02:18:45-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:45-08:00] Received new job 1
    [WARN] [2018-01-09T02:18:45-08:00] Rejected share #18644 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:45-08:00] Rejected share #18645 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:45-08:00] Rejected share #18646 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T02:18:46-08:00] Miner died! It will be restarted soon...
    [INFO] [2018-01-09T02:18:52-08:00] Bminer: When Crypto-mining Made Fast (v4.0.0-433ffb1)
    [INFO] [2018-01-09T02:18:52-08:00] Checking updates
    [INFO] [2018-01-09T02:18:52-08:00] Starting miner on devices [0 1 2 3 4 5]
    [INFO] [2018-01-09T02:18:53-08:00] Starting miner on device 0...
    [INFO] [2018-01-09T02:18:53-08:00] [D0] GPU check watchdog has started
    [INFO] [2018-01-09T02:18:53-08:00] Connected to zcl.suprnova.cc:4042
    [INFO] [2018-01-09T02:18:53-08:00] Started miner on device 0
    [INFO] [2018-01-09T02:18:53-08:00] Subscribed to stratum server
    [INFO] [2018-01-09T02:18:53-08:00] Set nonce to 9efbff6f00000000000000006ffffb9d
    [INFO] [2018-01-09T02:18:53-08:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T02:18:53-08:00] Received new job 1
    [INFO] [2018-01-09T02:18:53-08:00] Starting miner on device 1...
    [INFO] [2018-01-09T02:18:53-08:00] [D1] GPU check watchdog has started
    [INFO] [2018-01-09T02:18:53-08:00] Authorized
    [INFO] [2018-01-09T02:19:23-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [INFO] [2018-01-09T02:19:35-08:00] Received new job 2
    [INFO] [2018-01-09T02:19:53-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [INFO] [2018-01-09T02:19:59-08:00] Received new job 3
    [INFO] [2018-01-09T02:20:23-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [INFO] [2018-01-09T02:20:53-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [INFO] [2018-01-09T02:20:53-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [INFO] [2018-01-09T02:21:23-08:00] [GPU 0] Speed: 0.00 Sol/s 0.00 Nonce/s
    [FATA] [2018-01-09T02:21:53-08:00] Irrecoverable errors from miner in GPU 0: GPU hang detected

    system reboot should fix that, i switched to DSTM for 10 seconds and tried again with success aswell.
    Might be an overclock issue too, not sure yet

    Sorry if you saw my edit you'd see this causes trouble with reboots (have to do a hard power down/up via power button). Am mining on zcl suprnova.cc, ubuntu 16.04, this was with bminer 4.0.0.
    Did you try

    Code:
    $ sudo systemctl reboot --force

    like I mentioned?

    https://bt.irlbtc.com/view/2693128

  • Gelbstich
    Hero Member
    *****
    Offline Offline

    Activity: 562
    Merit: 509



    View Profile
    January 09, 2018, 03:59:20 PM
     #248
    How do I have to write it in the .bat file if I want to enter the following (that's how you write in EWBF):
     miner --server zen.2miners.com --port 7070 --user YOUR_ADDRESS.RIG_ID --pass x --eexit 3 --pec --fee 0

    I don't know how to write the
    Code:
    --pass x --eexit 3 --pec --fee 0
    part in the .bat file so bminer is able to read it correctly. Can anyone help me please?
    H
                     
                        ░░░                 
                ░▒█████████████▓░           
              ▓███████████████████▓         
            ▓█████████▓▓▒▓▓▓████▓░         
          ▒███████▒           ░             
         ▓█████▓░                     ░▒   
        ▓█████▒    ░▓███████▓▒        ░▓▓▒ 
       ░█████░   ░█████████████▒    ▒▓▒▒▓░
       █████▒   ░███████████████▓    ▓▒▒▒▓  
       █████    █████████████████░   ▒▓▒▒▓░ 
      ░████▓   ░██████████▓▓▓▓▓███   ░▓▒▒▓░ 
      ▒████▓   ▒████▓▒░              ░▓▒▒▓░
       █████ ░███▓░   ░▒▒▓▓▓▓▓▓▓▓    ▒▓▒▒▓░
       ████████▓  ▒▒▓▓▓▓▓▒▒▒▓▒▓▓░    ▓▒▒▓▓ 
       ░██████   ░▓█▓▓▓▓▓▓▓▓▓▓▓░    ▓▓▒▒▓░ 
        ▓███▒       ▒▓▓▓▓▓▓▓▒░     ▓▓▒▓▓▒   
         ▓█                      ▒▓▓▒▓▓▒   
                  ░           ░▒▓▓▓▓▓▓▒     
               ░▒▓▓▓▓▓▒▒▒▒▒▓▓▓▓▓▓▓▓▓▒       
              ░███▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒         
                 ░▒▓▓▓▓▓▓▓▓▓▓▓▒▒            

                             
    		R I Z E N
    .......White Paper....... .......Node System and Sidechains....... .......Help Desk.......
    		█
    █
    █
    █
    █
    █ 
    █   
    █
    █
    █   
    █ 
    █   

  • wetblanket
    Jr. Member
    *
    Offline Offline

    Activity: 95
    Merit: 2


    View Profile
    January 09, 2018, 04:04:13 PM
     #249
    Quote from: NameTaken on January 09, 2018, 03:43:18 PM
    Quote from: wetblanket on January 09, 2018, 03:40:44 PM
    Sorry if you saw my edit you'd see this causes trouble with reboots (have to do a hard power down/up via power button). Am mining on zcl suprnova.cc, ubuntu 16.04, this was with bminer 4.0.0.
    Did you try

    Code:
    $ sudo systemctl reboot --force

    like I mentioned?

    https://bt.irlbtc.com/view/2693128

    No, I didn't. The description of what it does scares me (re: filesystems, etc). Isn't there a possibility of system breakage?
    Improve mining pool share/hash rates with the aiostratum-proxy (https://bt.irlbtc.com/view/3179895) stratum mining proxy.

  • NameTaken
    Hero Member
    *****
    Offline Offline

    Activity: 630
    Merit: 502


    View Profile
    January 09, 2018, 04:15:11 PM
     #250
    Quote from: wetblanket on January 09, 2018, 04:04:13 PM
    Quote from: NameTaken on January 09, 2018, 03:43:18 PM
    Quote from: wetblanket on January 09, 2018, 03:40:44 PM
    Sorry if you saw my edit you'd see this causes trouble with reboots (have to do a hard power down/up via power button). Am mining on zcl suprnova.cc, ubuntu 16.04, this was with bminer 4.0.0.
    Did you try

    Code:
    $ sudo systemctl reboot --force

    like I mentioned?

    https://bt.irlbtc.com/view/2693128

    No, I didn't. The description of what it does scares me (re: filesystems, etc). Isn't there a possibility of system breakage?
    Quote
    When used with halt, poweroff, reboot or kexec, execute the selected operation without shutting down all units. However, all processes will be killed forcibly and all file systems are unmounted or remounted read-only. This is hence a drastic but relatively safe option to request an immediate reboot.

    Quote
    If --force is specified twice for these operations (with the exception of kexec), they will be executed immediately, without terminating any processes or unmounting any file systems. Warning: specifying --force twice with any of these operations might result in data loss.

    The warning is only for if you use --force twice.

  • sir_blacks
    Jr. Member
    *
    Offline Offline

    Activity: 119
    Merit: 3


    View Profile
    January 09, 2018, 04:16:38 PM
     #251
    @realbminer

    I seen agen 4 permanent network connection done by bminer
    1. Api = OK
    2. Poll what is mine = OK
    3. bminer.exe   XXX.ip-79-137-XX.eu   6633   ESTABLISHED = ?!?!
    4. bminer.exe   XXX.31.69.XXX   https   ESTABLISHED = Huh

    3 or 4 it suppose to be dev fee, BUT way 2 address ?!?!?! in version 3 was only 1 from 4 & 5 it came with 2 ?!??!?!

    Quote from: Gelbstich on January 09, 2018, 03:59:20 PM
    How do I have to write it in the .bat file if I want to enter the following (that's how you write in EWBF):
     miner --server zen.2miners.com --port 7070 --user YOUR_ADDRESS.RIG_ID --pass x --eexit 3 --pec --fee 0

    I don't know how to write the
    Code:
    --pass x --eexit 3 --pec --fee 0
    part in the .bat file so bminer is able to read it correctly. Can anyone help me please?

    bminer -devices 0 (card what you want to use) -uri stratum://wallet(or username).worker:pass@webpooladress:port -api 127.0.0.1:1880

    look here for more details https://www.bminer.me/examples/

    cheers

  • wetblanket
    Jr. Member
    *
    Offline Offline

    Activity: 95
    Merit: 2


    View Profile
    January 09, 2018, 04:17:09 PM
     #252
    Quote from: NameTaken on January 09, 2018, 04:15:11 PM
    Quote from: wetblanket on January 09, 2018, 04:04:13 PM
    Quote from: NameTaken on January 09, 2018, 03:43:18 PM
    Code:
    $ sudo systemctl reboot --force

    like I mentioned?

    https://bt.irlbtc.com/view/2693128

    No, I didn't. The description of what it does scares me (re: filesystems, etc). Isn't there a possibility of system breakage?
    Quote
    When used with halt, poweroff, reboot or kexec, execute the selected operation without shutting down all units. However, all processes will be killed forcibly and all file systems are unmounted or remounted read-only. This is hence a drastic but relatively safe option to request an immediate reboot.

    Quote
    If --force is specified twice for these operations (with the exception of kexec), they will be executed immediately, without terminating any processes or unmounting any file systems. Warning: specifying --force twice with any of these operations might result in data loss.

    Apologies! I obviously didn't read that closely enough. Thanks for taking the time to educate me... again!
    Improve mining pool share/hash rates with the aiostratum-proxy (https://bt.irlbtc.com/view/3179895) stratum mining proxy.

  • hav
    Newbie
    *
    Offline Offline

    Activity: 16
    Merit: 0


    View Profile
    January 09, 2018, 04:20:52 PM
     #253
    Code:
    [INFO] [2018-01-09T17:18:26+01:00] Set target to 918387dad1e468f570415ac397d96646bae0ad99dbe78033de028099e46e0700
    [INFO] [2018-01-09T17:18:26+01:00] Received new job 39
    [INFO] [2018-01-09T17:18:26+01:00] Accepted share #192
    [INFO] [2018-01-09T17:18:26+01:00] Accepted share #193
    [INFO] [2018-01-09T17:18:26+01:00] Accepted share #194
    [INFO] [2018-01-09T17:18:26+01:00] Accepted share #195
    [INFO] [2018-01-09T17:18:26+01:00] Accepted share #196
    [INFO] [2018-01-09T17:18:26+01:00] Accepted share #197
    [INFO] [2018-01-09T17:18:26+01:00] Accepted share #198
    [INFO] [2018-01-09T17:18:26+01:00] Set target to 54734c9f97375c7b0eb318eb75223b511137db8943bb58ec157d4becf5f30000
    [INFO] [2018-01-09T17:18:26+01:00] Received new job 3a
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #199 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #200 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #201 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #202 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #203 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #204 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #205 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #206 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #207 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #208 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #209 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #210 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #211 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #212 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #213 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #214 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Get error: Too many rejected shares, resetting in 5 seconds
    [WARN] [2018-01-09T17:18:31+01:00] Connection failed due to End of file, retrying in 5 seconds
    [INFO] [2018-01-09T17:18:31+01:00] Connected to zen.suprnova.cc:3618
    [INFO] [2018-01-09T17:18:36+01:00] Subscribed to stratum server
    [INFO] [2018-01-09T17:18:36+01:00] Set nonce to 5e39000000000000000000000000395f
    [INFO] [2018-01-09T17:18:36+01:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T17:18:36+01:00] Received new job 3e
    [WARN] [2018-01-09T17:18:36+01:00] Get error: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied., resetting in 5 seconds
    [INFO] [2018-01-09T17:18:36+01:00] Connected to zen.suprnova.cc:3618
    [INFO] [2018-01-09T17:18:41+01:00] Subscribed to stratum server
    [INFO] [2018-01-09T17:18:41+01:00] Set nonce to e40a0008000000000000000008000ae5
    [INFO] [2018-01-09T17:18:41+01:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T17:18:41+01:00] Received new job 3e
    [WARN] [2018-01-09T17:18:41+01:00] Rejected share #349 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T17:18:41+01:00] Get error: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied., resetting in 5 seconds
    [INFO] [2018-01-09T17:18:41+01:00] Connected to zen.suprnova.cc:3618
    [INFO] [2018-01-09T17:18:46+01:00] Subscribed to stratum server
    [INFO] [2018-01-09T17:18:46+01:00] Set nonce to d6ceff47000000000000000047ffced5
    [INFO] [2018-01-09T17:18:46+01:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T17:18:46+01:00] Received new job 3e
    [WARN] [2018-01-09T17:18:46+01:00] Get error: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied., resetting in 5 seconds
    [INFO] [2018-01-09T17:18:46+01:00] Connected to zen.suprnova.cc:3618

    It happened again, any idea what this could be?

  • bigjee
    Full Member
    ***
    Offline Offline

    Activity: 434
    Merit: 107



    View Profile
    January 09, 2018, 04:53:14 PM
     #254
    Quote from: realbminer on January 09, 2018, 09:15:52 AM
    Thanks everybody for the feedback. The 5.0.0 version has been released:

    • Minor performance improvement for GTX 1060.
    • Fixed performance regressions in 4.0.0 on Windows.
    • Optimization on the networking layer.
    • Show GPU ID in case of hardware errors.
    • Introduced the option -no-timestamps which suppresses the timestamps in the logging messages.

    Happy mining!

    You should probably put the Version number in the subject of this thread so ppl know easily when you update your miner.
    e.g. [ANN] Bminer (v5.0): a fast Equihash miner for CUDA GPUs

    That way ppl wont have to look at page 1 or 13 everytime to figure out if there's been an update.

    Good job on bringing new versions I havent tested it yet but the last one didnt work for me. Will do so over the weekend.

  • hopfi2k
    Newbie
    *
    Offline Offline

    Activity: 48
    Merit: 0


    View Profile
    January 09, 2018, 05:42:34 PM
     #255
    Thanks for version 5.0!

    I have tested over the past 3 days EWBF, dstm and Bminer (each one for 24 hours), and Bminer is the fasted!

    Linux, Ubuntu 16.04, ZOTAC 1070ti AMP gives me (at 110W = 64%, GPU +220, Memory +700) 61°c:

    EWBF: 485 Sol/s
    dstm:492 Sol/s
    Bminer:505 Sol/s

    and on pool (flypool):

    EWBF: 461 Sol/s
    dstm: 463 Sol/s
    Bminer: 477 Sol/s

    Happy to pay the 2% dev-fee ;-)

    Cheers,
    Andy

  • Gelbstich
    Hero Member
    *****
    Offline Offline

    Activity: 562
    Merit: 509



    View Profile
    January 09, 2018, 07:02:25 PM
     #256
    Quote from: sir_blacks on January 09, 2018, 04:16:38 PM
    @realbminer

    I seen agen 4 permanent network connection done by bminer
    1. Api = OK
    2. Poll what is mine = OK
    3. bminer.exe   XXX.ip-79-137-XX.eu   6633   ESTABLISHED = ?!?!
    4. bminer.exe   XXX.31.69.XXX   https   ESTABLISHED = Huh

    3 or 4 it suppose to be dev fee, BUT way 2 address ?!?!?! in version 3 was only 1 from 4 & 5 it came with 2 ?!??!?!

    Quote from: Gelbstich on January 09, 2018, 03:59:20 PM
    How do I have to write it in the .bat file if I want to enter the following (that's how you write in EWBF):
     miner --server zen.2miners.com --port 7070 --user YOUR_ADDRESS.RIG_ID --pass x --eexit 3 --pec --fee 0

    I don't know how to write the
    Code:
    --pass x --eexit 3 --pec --fee 0
    part in the .bat file so bminer is able to read it correctly. Can anyone help me please?

    bminer -devices 0 (card what you want to use) -uri stratum://wallet(or username).worker:pass@webpooladress:port -api 127.0.0.1:1880

    look here for more details https://www.bminer.me/examples/

    cheers
    Thanks a lot! It works without the --eexit and so on just fine.
    H
                     
                        ░░░                 
                ░▒█████████████▓░           
              ▓███████████████████▓         
            ▓█████████▓▓▒▓▓▓████▓░         
          ▒███████▒           ░             
         ▓█████▓░                     ░▒   
        ▓█████▒    ░▓███████▓▒        ░▓▓▒ 
       ░█████░   ░█████████████▒    ▒▓▒▒▓░
       █████▒   ░███████████████▓    ▓▒▒▒▓  
       █████    █████████████████░   ▒▓▒▒▓░ 
      ░████▓   ░██████████▓▓▓▓▓███   ░▓▒▒▓░ 
      ▒████▓   ▒████▓▒░              ░▓▒▒▓░
       █████ ░███▓░   ░▒▒▓▓▓▓▓▓▓▓    ▒▓▒▒▓░
       ████████▓  ▒▒▓▓▓▓▓▒▒▒▓▒▓▓░    ▓▒▒▓▓ 
       ░██████   ░▓█▓▓▓▓▓▓▓▓▓▓▓░    ▓▓▒▒▓░ 
        ▓███▒       ▒▓▓▓▓▓▓▓▒░     ▓▓▒▓▓▒   
         ▓█                      ▒▓▓▒▓▓▒   
                  ░           ░▒▓▓▓▓▓▓▒     
               ░▒▓▓▓▓▓▒▒▒▒▒▓▓▓▓▓▓▓▓▓▒       
              ░███▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▒         
                 ░▒▓▓▓▓▓▓▓▓▓▓▓▒▒            

                             
    		R I Z E N
    .......White Paper....... .......Node System and Sidechains....... .......Help Desk.......
    		█
    █
    █
    █
    █
    █ 
    █   
    █
    █
    █   
    █ 
    █   

  • Riko87
    Newbie
    *
    Offline Offline

    Activity: 6
    Merit: 0


    View Profile
    January 09, 2018, 09:36:34 PM
     #257
    Version 5 is much better in performance in fact now uses 99% of all 1080i video cards compared to version 4 that used 99% only from the first and 90% from the others .. but after about 30 minutes of operation freezes without any message .. I was forced to put back the version 4 .. to anyone else from the same problem under Windows 10?

  • torstenx
    Newbie
    *
    Offline Offline

    Activity: 5
    Merit: 0


    View Profile
    January 09, 2018, 10:41:29 PM
     #258
    On Ubuntu with 1080Ti version 5 is 0.5% slower than version 4

  • realbminer (OP)
    Member
    **
    Offline Offline

    Activity: 461
    Merit: 49


    View Profile WWW
    January 10, 2018, 12:03:50 AM
     #259
    Quote from: hav on January 09, 2018, 04:20:52 PM
    Code:
    [INFO] [2018-01-09T17:18:26+01:00] Set target to 918387dad1e468f570415ac397d96646bae0ad99dbe78033de028099e46e0700
    [INFO] [2018-01-09T17:18:26+01:00] Received new job 39
    [INFO] [2018-01-09T17:18:26+01:00] Accepted share #192
    [INFO] [2018-01-09T17:18:26+01:00] Accepted share #193
    [INFO] [2018-01-09T17:18:26+01:00] Accepted share #194
    [INFO] [2018-01-09T17:18:26+01:00] Accepted share #195
    [INFO] [2018-01-09T17:18:26+01:00] Accepted share #196
    [INFO] [2018-01-09T17:18:26+01:00] Accepted share #197
    [INFO] [2018-01-09T17:18:26+01:00] Accepted share #198
    [INFO] [2018-01-09T17:18:26+01:00] Set target to 54734c9f97375c7b0eb318eb75223b511137db8943bb58ec157d4becf5f30000
    [INFO] [2018-01-09T17:18:26+01:00] Received new job 3a
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #199 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #200 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #201 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #202 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #203 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #204 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #205 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #206 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #207 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #208 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #209 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #210 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #211 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #212 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #213 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Rejected share #214 ([21,"job not found"])
    [WARN] [2018-01-09T17:18:26+01:00] Get error: Too many rejected shares, resetting in 5 seconds
    [WARN] [2018-01-09T17:18:31+01:00] Connection failed due to End of file, retrying in 5 seconds
    [INFO] [2018-01-09T17:18:31+01:00] Connected to zen.suprnova.cc:3618
    [INFO] [2018-01-09T17:18:36+01:00] Subscribed to stratum server
    [INFO] [2018-01-09T17:18:36+01:00] Set nonce to 5e39000000000000000000000000395f
    [INFO] [2018-01-09T17:18:36+01:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T17:18:36+01:00] Received new job 3e
    [WARN] [2018-01-09T17:18:36+01:00] Get error: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied., resetting in 5 seconds
    [INFO] [2018-01-09T17:18:36+01:00] Connected to zen.suprnova.cc:3618
    [INFO] [2018-01-09T17:18:41+01:00] Subscribed to stratum server
    [INFO] [2018-01-09T17:18:41+01:00] Set nonce to e40a0008000000000000000008000ae5
    [INFO] [2018-01-09T17:18:41+01:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T17:18:41+01:00] Received new job 3e
    [WARN] [2018-01-09T17:18:41+01:00] Rejected share #349 ([24,"unauthorized worker",null])
    [WARN] [2018-01-09T17:18:41+01:00] Get error: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied., resetting in 5 seconds
    [INFO] [2018-01-09T17:18:41+01:00] Connected to zen.suprnova.cc:3618
    [INFO] [2018-01-09T17:18:46+01:00] Subscribed to stratum server
    [INFO] [2018-01-09T17:18:46+01:00] Set nonce to d6ceff47000000000000000047ffced5
    [INFO] [2018-01-09T17:18:46+01:00] Set target to 0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f00
    [INFO] [2018-01-09T17:18:46+01:00] Received new job 3e
    [WARN] [2018-01-09T17:18:46+01:00] Get error: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied., resetting in 5 seconds
    [INFO] [2018-01-09T17:18:46+01:00] Connected to zen.suprnova.cc:3618

    It happened again, any idea what this could be?

    It seems to me that you haven't specified the password in the URI. As a result suprnova is rejecting the connection. Adding the password works for me.
    When Crypto-mining Made Fast. @realbminer on TWTR

  • NameTaken
    Hero Member
    *****
    Offline Offline

    Activity: 630
    Merit: 502


    View Profile
    January 10, 2018, 02:49:03 AM
     #260
    What does 3a6fcd1 in the file name mean? It would be convenient to have an HTTP endpoint with the latest version info so it can be used as a variable in a script or Ansible-playbook in my case. E.g.

    Code:
    curl -s https://www.bminercontent.com/releases/bminer-$(curl -s https://www.bminer.me/releases/latest)-amd64.tar.xz | tar -xvJCopt/bminer/ --strip 1

    Like https://storage.googleapis.com/kubernetes-release/release/stable.txt
    Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 [13] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 ... 164 »
      Print  
Page 12
Viewing Page: 13

IRLBTC™ © 2025 IRLBTC.com