One stability issue I had was that bminer appeared to be running normally, but hashrate at the pool dropped to zero like it was disconnected; this went on for about an hour before I noticed it.

Is it possible for bminer to work with Mining Rig Rentals? I've only had luck using EWBF, but I would prefer bminer.

So i've finally gathered a bit of time here and there to compare DSTM and Bminer on my system.

And i have to agree with cryptoyes, ive officially switched back to DSTM, and heres why. (These stats are only my finding and nothing else, take it as you will.)
Also, i used NiceHash for the awesome hashrate charting they have.

Lets get things rolling with bminer, as i've caught up on the thread it seems there is more things that need to be addressed other than the hashrate, but i'm not here for that, i'm just concerned about how many solutions my machine can output as i'm sure the rest of us are.
Now i don't have a farm or even a big rig to put behind this, so for my test ive used a 980 and a 1070ti.

Lets start with the console report of the sols/s, for the 980 it reads about 340 and for the 1070ti it reads 550 steady for the most part.
For a grand total of 890 give or take a few.
I ran this test for about 34 hours before I just shut it down and called it quits. (Originally planned 48 hours like I had done for DSTM)
And here's the pool side stats.
https://imgur.com/fjJBeKt

Now for my DSTM findings
The console reports an average of about 330.2 for the 980 and 530.0 for the 1070ti. (Give or take a couple sols/s on each at any given time but DSTMS average rate is pretty awesome.)
Now that totals a slightly less, but none the less, 860 sols/s average.
As noted above, this average is based on a 48 hour run time.
and the pool side stats once again.
https://imgur.com/zboAWew

Again, take this with a grain of salt as it is only my test, in my machines environment. You may or may not get better or worse results with these miners than I did. This is just what i have found.
Sure both miners averages fluctuated up and down compared to their own reporting but over a day and a half of averages should give a pretty accurate number in my opinion and is enough for me.
But do with this as you will! Thanks for actually taking the time to read my efforts!

Yes, I will work on this. But supporting Mining Rig Rentals will first require bminer to support failover pools. I plan to add failover pool support in 6.0 and then I will add Mining Rig Rentals support.

Thank you for being patient, bminer will eventually get there.

Thank you for the bug report. It will be addressed in the next release.

I will add an option to configure this timeout.

Will Bminer be added to SMOS?

Switched two rigs from DSTM to Bminer on zhash.pro pool.

First rig = 7x1070 Ti getting 3410 sol/s on DSTM 3500 sol/s on Bminer
Second rig = 6x1060 (3gb) getting 1610 sol/s on DSTM 1670 sol/s on Bminer

Numbers given in the Bminer window match the numbers shown to me on the zhash pool website under "average hashrate" (https://i.imgur.com/x8nF2Fk.png) nearly perfectly which suggests the numbers aren't fake but maybe someone can point out a reason this isn't sufficient "proof".

Either way I'll stick with using Bminer for now until someone can actually prove this miner is fraudulent. I also have ZERO rejected shares on all of my rigs running Bminer at the time of this post.

It is most likely caused by OC settings. Different miners may require different OC settings to run stably.

If you have used -logfile to save the log, you can share it with me and I will be happy to diagnose the error.

Changing from EWBF to DSTM increased average Sols from 520 to 534. Number of shares increased from 167 to 180 over a 40 minute test period on both. I then tried Bminer. For another 40 minute test, sols increased to 550, however the number of shares reduced to 147. There were 0 rejected shares on all 3 tests and same 1070ti, same overclock, same pool and exactly 40 min.

Very impressive higher sols with Bminer but how come the number of shares would be less than EWBF and DSTM?

Thank you for the reply. I'll maybe try another test sometime on 2 same cards/systems at the same time.

I'd like to prove Bminer is more profitable than DSTM. Has anyone done enough tests to conclude this to be the case or not?