<<  >> (p.9)
    Author Topic: [GUIDE] BitFury Miner Support/Tuning  (Read 148101 times)
    This is a self-moderated topic. If you do not want to be moderated by the person who started this topic, create a new topic.

    • Cablez
    Legendary
    *
    Offline Offline

    Activity: 1400
    Merit: 1000


    I owe my soul to the Bitcoin code...


    View Profile
    September 21, 2013, 12:47:41 PM
     #161
    Quote from: Isokivi on September 21, 2013, 04:06:37 AM
    This is achieved by penciling the recistances to about 1.1k, adding heatsinks and fans. Im still struggling to keep it cool enough during the daytime.
    Once I get the cooling figured out I will once again proceed to optimising the error rates.


    What effects are you seeing when the cooling is insufficient?  I have one board that autotunes itself to 0 and back to 30GH/s all day.  I am wondering if my cooling fan is not enough.
    Tired of substandard power distribution in your ASIC setup???   Chris' Custom Cablez will get you sorted out right!  No job too hard so PM me for a quote
    Check my products or ask a question here: https://bt.irlbtc.com/view/74397.0

  • Isokivi
    Hero Member
    *****
    Offline Offline

    Activity: 910
    Merit: 1000


    Items flashing here available at btctrinkets.com


    View Profile WWW
    September 21, 2013, 01:16:04 PM
     #162
    Quote from: Cablez on September 21, 2013, 12:47:41 PM
    Quote from: Isokivi on September 21, 2013, 04:06:37 AM
    This is achieved by penciling the recistances to about 1.1k, adding heatsinks and fans. Im still struggling to keep it cool enough during the daytime.
    Once I get the cooling figured out I will once again proceed to optimising the error rates.


    What effects are you seeing when the cooling is insufficient?  I have one board that autotunes itself to 0 and back to 30GH/s all day.  I am wondering if my cooling fan is not enough.

    I am was seeing a single chip dissapearing, always the same chip and signifigantly lowered hashrate which could most likeley be accounted by the regulator overheating.
    Atm it looks like I have cracked 70Gh/s for good with two boards and I might see additional imrovement once my Arctic cooling F14 fans get here (just ordered). They seem more suitable to cool entire h-boards than the slightly too small F12's that i am currently running.
    Bitcoin trinkets now on my online store: btc trinkets.com <- Bitcoin Tiepins, cufflinks, lapel pins, keychains, card holders and challenge coins.

  • polarhei
    Sr. Member
    ****
    Offline Offline

    Activity: 462
    Merit: 250


    Firing it up


    View Profile
    September 21, 2013, 01:20:30 PM
     #163
    Quote from: Isokivi on September 21, 2013, 04:06:37 AM
    Quote from: btc4life on September 20, 2013, 04:12:43 PM
    Anyone getting over 500GH/s with a full rig?
    If I had a full kit, I would be past that with a healthy 10% margin:
    Code:
    1       aIfDSo  55      2.190   2.442   153     11      0       0       231     [0:0]   4       9 9 10 11 11 10 10 9 10 9 9 10 10 9 8 9         1 1 0 0 0 1 1 1 0 1 1 0 0 1 2 1
    2       aIfDSo  55      2.348   2.346   164     2       0       0       222     [0:1]   0       10 10 10 9 10 10 10 10 11 11 11 11 11 11 10 9   0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 1
    3       aIfDSo  55      2.004   2.463   140     6       0       0       233     [0:2]   0       8 9 9 8 8 8 8 9 9 9 9 9 10 9 9 9        1 0 0 1 1 1 1 0 0 0 0 1 0 0 0 0
    4       aIfDSo  55      1.675   2.378   117     2       0       0       225     [0:3]   36      7 7 7 6 8 8 8 8 8 8 8 6 7 7 7 7         0 0 0 1 0 0 0 0 0 0 0 1 0 0 0 0
    5       aIfDSo  55      2.520   2.389   176     4       0       0       226     [0:4]   0       12 11 10 11 11 11 11 11 11 11 11 10 10 11 12 12         0 1 1 0 0 0 0 0 0 0 0 1 1 0 0 0
    6       aIfDSo  55      2.291   2.389   160     16      0       0       226     [0:5]   42      10 9 11 10 9 10 10 11 11 9 10 11 10 10 10 9     1 2 0 1 2 1 1 0 0 2 1 0 1 1 1 2
    7       aIfDSo  55      2.319   2.336   162     7       0       0       221     [0:6]   21      10 10 11 11 10 10 11 11 10 10 10 10 10 8 10 10  1 1 0 0 1 1 0 0 1 0 0 0 0 2 0 0
    8       aIfDSo  55      2.405   2.420   168     4       0       0       229     [0:7]   0       11 10 11 11 11 11 11 11 10 10 9 10 10 11 10 11  0 1 0 0 0 0 0 0 0 0 1 0 1 0 1 0
    9       aIfDSo  55      2.147   2.516   150     25      0       0       238     [0:8]   84      8 8 10 10 10 9 10 10 8 9 11 8 9 9 11 10         3 3 1 1 1 2 1 1 3 1 0 3 2 2 0 1
    10      aIfDSo  55      1.618   2.420   113     80      0       0       229     [0:9]   288     9 9 6 5 8 6 4 9 7 8 5 6 6 8 6 11        3 3 6 7 4 6 8 4 5 4 7 6 6 4 6 1
    11      aIfDSo  55      2.434   2.336   170     2       0       0       221     [0:A]   0       10 10 9 11 11 10 11 11 11 11 11 11 11 11 11 10  0 0 1 0 0 1 0 0 0 0 0 0 0 0 0 0
    12      aIfDSo  55      2.348   2.272   164     4       0       0       215     [0:B]   21      8 10 10 10 10 10 10 10 10 11 11 11 11 10 11 11  3 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0
    13      aIfDSo  55      2.391   2.368   167     3       0       0       224     [0:C]   36      11 11 11 11 10 10 9 9 10 10 11 11 11 11 11 10   0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 1
    14      aIfDSo  55      2.591   2.463   181     10      0       0       233     [0:D]   21      10 12 11 11 12 12 12 11 10 11 12 12 12 11 11 11         1 0 1 1 0 0 0 1 2 1 0 0 0 1 1 1
    15      aIfDSo  55      2.362   2.315   165     0       0       0       219     [0:E]   36      10 10 10 10 11 11 11 11 11 10 10 10 10 10 10 10         0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    16      aIfDSo  55      1.790   2.410   125     38      0       0       228     [0:F]   126     10 10 7 7 8 9 9 6 7 9 8 5 6 7 8 9       0 0 3 3 3 2 2 4 3 1 2 5 4 3 2 1
    17      aIfDSo  55      2.534   2.547   177     4       0       0       241     [4:0]   0       11 10 11 11 11 11 12 11 12 12 12 10 11 11 11 10         0 1 0 0 0 0 0 1 0 0 0 1 0 0 0 1
    18      aIfDSo  55      1.961   2.494   137     23      0       0       236     [4:1]   60      9 9 10 8 8 9 10 8 8 7 9 8 10 8 8 8      1 1 0 2 2 1 0 2 2 3 1 2 0 2 2 2
    19      aIfDSo  55      2.649   2.516   185     6       0       0       238     [4:2]   0       11 11 11 11 12 12 11 12 12 11 12 11 12 12 12 12         0 0 0 1 1 0 1 0 0 1 1 1 0 0 0 0
    20      aIfDSo  56      2.047   2.590   143     41      0       0       245     [4:3]   51      10 9 9 9 8 7 8 8 9 9 8 10 9 8 10 12     2 2 2 2 3 4 3 3 2 3 4 2 3 4 2 0
    21      aIfDSo  55      2.119   2.484   148     1       0       0       235     [4:4]   0       8 9 9 10 10 10 10 10 9 9 9 9 9 9 9 9    1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    22      aIfDSo  55      2.133   2.526   149     21      0       4       239     [4:5]   55      8 10 11 10 11 6 9 9 11 10 10 11 9 11 7 6        2 1 0 1 0 4 1 1 0 1 1 0 2 0 3 4
    23      aIfDSo  55      2.348   2.431   164     5       0       2       230     [4:6]   19      10 10 11 10 10 9 11 11 11 10 10 10 11 11 10 9   0 0 0 1 1 2 0 0 0 0 0 0 0 0 0 1
    24      aIfDSo  55      2.219   2.473   155     5       0       0       234     [4:7]   13      9 10 10 10 10 10 9 10 9 10 9 11 10 9 10 9       1 0 0 0 0 0 1 0 1 0 1 0 0 1 0 0
    25      aIfDSo  55      2.262   2.664   158     17      0       0       252     [4:8]   16      9 9 11 10 9 11 10 10 9 8 10 9 11 11 9 12        3 2 0 1 1 0 1 1 1 1 1 2 0 0 3 0
    26      aIfDSo  55      2.448   2.526   171     12      0       0       239     [4:9]   1       11 11 10 11 9 10 8 9 11 11 11 12 12 12 11 12    1 0 1 0 2 1 3 2 0 0 1 0 0 0 1 0
    27      aIfDSo  55      0.616   0.772   43      8       0       0       73      [4:A]   31      1 2 2 2 3 3 3 2 2 3 3 4 4 4 3 2         1 1 1 1 0 0 0 1 1 0 1 0 0 0 1 0
    28      aIfDSo  55      1.804   2.600   126     45      0       0       246     [4:B]   69      8 9 7 6 9 8 9 11 8 8 6 8 8 5 8 8        3 1 3 4 2 4 3 1 3 2 3 2 2 6 3 3
    29      aIfDSo  55      2.190   2.558   153     25      0       0       242     [4:C]   31      10 9 9 10 11 9 10 11 11 11 10 10 10 7 7 8       1 2 2 1 1 2 2 1 1 1 2 1 0 3 3 2
    30      aIfDSo  55      2.205   2.463   154     27      0       0       233     [4:D]   116     9 7 10 8 10 8 10 10 11 11 10 10 11 10 9 10      2 3 0 2 1 4 2 2 1 1 2 2 1 1 2 1
    31      aIfDSo  55      2.377   2.442   166     5       0       0       231     [4:E]   0       12 12 11 10 10 10 11 11 8 9 10 10 10 11 10 11   0 0 0 0 0 0 0 0 1 1 0 1 1 0 1 0
    32      aIfDSo  55      2.548   2.558   178     9       0       0       242     [4:F]   0       12 10 10 11 11 12 12 12 12 11 12 11 10 11 10 11         0 2 1 1 1 0 0 0 0 1 0 1 1 0 1 0
    speed:1761 noncerate[GH/s]:69.893 (2.184/chip) hashrate[GH/s]:76.905 good:4882 errors:468 spi-errors:0 miso-errors:6 jobs:295 (record[GH/s]:73.530)
    0:      880     35.433  38.262  2475    214     0       0
    4:      881     34.460  38.643  2407    254     0       6

    This is achieved by penciling the recistances to about 1.1k, adding heatsinks and fans. Im still struggling to keep it cool enough during the daytime.
    Once I get the cooling figured out I will once again proceed to optimising the error rates.

    To keep this cool, the simpest method is using pump, radiator , tank and cooking oil to maintain the working environment as the system is not so complex, which will be broken if the forked coin cannot be mined efficient.

  • Isokivi
    Hero Member
    *****
    Offline Offline

    Activity: 910
    Merit: 1000


    Items flashing here available at btctrinkets.com


    View Profile WWW
    September 21, 2013, 02:02:11 PM
     #164
    Quote from: polarhei on September 21, 2013, 01:20:30 PM
    To keep this cool, the simpest method is using pump, radiator , tank and cooking oil to maintain the working environment as the system is not so complex, which will be broken if the forked coin cannot be mined efficient.
    I wonder how my router would react to the oil leaking trough the network cable.. and how the pencil mod would work under it. But I would love to see someone do and report on this method.
    Bitcoin trinkets now on my online store: btc trinkets.com <- Bitcoin Tiepins, cufflinks, lapel pins, keychains, card holders and challenge coins.

  • juhakall
    Sr. Member
    ****
    Offline Offline

    Activity: 658
    Merit: 250


    View Profile
    September 21, 2013, 03:10:19 PM
     #165
    Quote from: af_newbie on September 21, 2013, 02:25:23 PM
    I have two cards doing 66 GH/s.  I cool them with a 6" AC fan, 0.35A@110V, 200+cfm.  Works very well.  The 12V fans were not able to cool the cards.
    For the full kit, my plan is to have 3 AC fans, blowing 600 cfm at them.  Probably an overkill, but the cards will stay cool.  No heat sinks.

    How did you mod the cards? 66GH/s without heatsinks sounds great, I'm currently just at 60GH/s after pencil modding R02F resistors to 1.18k.

  • btc4life
    Newbie
    *
    Offline Offline

    Activity: 18
    Merit: 0


    View Profile
    September 21, 2013, 03:27:59 PM
     #166
    I am currently getting 551GH/s noncerate as a type this on my full rig.   Running R02F at 1.2k, small heatsinks attached to the back of each board, 6x 120mm fans split on each side of the rig, 2x 200mm fans on the top of the rig.

    The chip temps all seem to be in the low 50 C range or lower.

  • goxed
    Legendary
    *
    Offline Offline

    Activity: 1946
    Merit: 1006


    Bitcoin Crypto mining Hardware.


    View Profile
    September 22, 2013, 07:16:34 AM
     #167
    Quote from: btc4life on September 21, 2013, 03:27:59 PM
    I am currently getting 551GH/s noncerate as a type this on my full rig.   Running R02F at 1.2k, small heatsinks attached to the back of each board, 6x 120mm fans split on each side of the rig, 2x 200mm fans on the top of the rig.

    The chip temps all seem to be in the low 50 C range or lower.

    Good to know that 16 overclocked board can function well together. Thanks
    Revewing Bitcoin Crypto mining Hardware.

  • puffmais
    Sr. Member
    ****
    Offline Offline

    Activity: 404
    Merit: 250


    View Profile
    September 22, 2013, 11:33:55 AM
     #168
    Hi,

    my Boards now hashing at around 313gh/s (original around 170gh/s)
    1,1kQhm








    puffmais

  • darkfriend77 (OP)
    Sr. Member
    ****
    Offline Offline

    Activity: 434
    Merit: 265


    View Profile WWW
    September 22, 2013, 11:48:38 AM
     #169
    Quote from: puffmais on September 22, 2013, 11:33:55 AM
    Hi,

    my Boards now hashing at around 313gh/s (original around 170gh/s)
    1,1kQhm

    puffmais

    nice ... can you link or tell what you have done ... on the backside of the regulator ... how much space is there ... if all board slots are filled ...
    -:| www.DOTMog.com |:-

  • puffmais
    Sr. Member
    ****
    Offline Offline

    Activity: 404
    Merit: 250


    View Profile
    September 22, 2013, 12:02:34 PM
     #170
    Quote from: darkfriend77 on September 22, 2013, 11:48:38 AM
    Quote from: puffmais on September 22, 2013, 11:33:55 AM
    Hi,

    my Boards now hashing at around 313gh/s (original around 170gh/s)
    1,1kQhm

    puffmais

    nice ... can you link or tell what you have done ... on the backside of the regulator ... how much space is there ... if all board slots are filled ...

    I have only put these small heatsinks on the board ( http://www.amazon.de/gp/product/B004BU6ITM )
    -Cooling the Boards with 120mm fans
    -Pencil mod to 1,1kQhm
    -modified the config to speed 54 55

    there is almost zero space left from the heatsink to the next regulator... but it fits

    best regards 
    puffmais

  • Micky25
    Legendary
    *
    Offline Offline

    Activity: 974
    Merit: 1000



    View Profile
    September 22, 2013, 12:12:02 PM
     #171
    Quote from: puffmais on September 22, 2013, 12:02:34 PM

    I have only put these small heatsinks on the board ( http://www.amazon.de/gp/product/B004BU6ITM )
    -Cooling the Boards with 120mm fans
    -Pencil mod to 1,1kQhm
    -modified the config to speed 54 55

    there is almost zero space left from the heatsink to the next regulator... but it fits

    best regards 
    puffmais

    very nice! How many small heatsinks are in this paket? 12? Are these the same? They are cheaper http://www.amazon.de/gp/product/B004BU6ITM/ref=ox_sc_act_image_1?ie=UTF8&psc=1&smid=ALPJ49DNEL3HT#productDescription

  • puffmais
    Sr. Member
    ****
    Offline Offline

    Activity: 404
    Merit: 250


    View Profile
    September 22, 2013, 12:17:17 PM
     #172
    Yes, i have bought these for 1,85euro Wink
    correct 12 small heatsinks and the other bigger ones are in one package.

  • Foofighter
    Hero Member
    *****
    Offline Offline

    Activity: 882
    Merit: 547


    BTC Mining Hardware, Trading and more


    View Profile
    September 22, 2013, 12:21:12 PM
     #173
    I offer also heatsinks, if anyone needs - (3M pads already on the sinks)
    https://bt.irlbtc.com/view/266905.msg3208630#msg3208630
    ex official Canaan Distributor (Cryptouniverse)

  • darkfriend77 (OP)
    Sr. Member
    ****
    Offline Offline

    Activity: 434
    Merit: 265


    View Profile WWW
    September 22, 2013, 02:52:00 PM
     #174
    Here ... they offer the set for 1€ ... :-)

    http://www.cbo-do.de/shop/product_info.php?refID=geiz&info=p20117_Arctic-Cooling-VR004-Kuehlkoerper-Set-Kuehl-Koerper-Cooler-fuer-GeForce-GTX-480-NEU.html
    -:| www.DOTMog.com |:-

  • darkfriend77 (OP)
    Sr. Member
    ****
    Offline Offline

    Activity: 434
    Merit: 265


    View Profile WWW
    September 22, 2013, 02:59:21 PM
     #175
    Seems like I'm getting the best results with clockspeed btw. 54 - 55 ...

    At the moment im letting the monitor script run for 2 hours .. then clock down
    each chip that has more then 2.5% errors ... for most of the chip its 54-55

    ...  Tongue


    Quote
    1   aIfDSo   55   2.520   2.410   176   2
    2   aIfDSo   54   1.990   2.230   139   0
    3   aIfDSo   54   2.491   2.357   174   0
    4   aIfDSo   55   2.462   2.389   172   0
    5   aIfDSo   55   2.262   2.336   158   4
    6   aIfDSo   54   2.362   2.241   165   0
    7   aIfDSo   54   2.147   2.336   150   4
    8   aIfDSo   54   1.933   1.977   135   0
    9   aIfDSo   54   2.405   2.368   168   3
    10   aIfDSo   54   2.677   2.315   187   0
    11   aifdso   55   0.000   0.000   0   0
    12   aIfDSo   54   2.147   2.146   150   1
    13   aIfDSo   54   2.176   2.177   152   3
    14   aIfDSo   55   2.190   2.389   153   3
    15   aIfDSo   54   2.262   2.251   158   0
    16   aIfDSo   54   2.305   2.357   161   0
    17   aIfdso   55   0.000   0.000   0   0
    18   aIfDSo   55   2.205   2.241   154   2
    19   aIfDSo   55   2.334   2.325   163   3
    20   aIfDSo   54   2.047   1.881   143   0
    21   aIfDSo   54   2.334   2.124   163   0
    22   aIfDSo   55   2.004   2.209   140   0
    23   aIfDSo   54   2.262   2.177   158   0
    24   aIfDSo   55   2.462   2.272   172   0
    25   aIfDSo   54   1.890   2.093   132   1
    26   aIfDSo   55   2.219   2.262   155   4
    27   aIfDSo   54   2.233   2.082   156   1
    28   aIfDSo   54   2.276   2.072   159   1
    29   aIfDSo   55   2.391   2.188   167   1
    30   aIfDSo   55   2.147   2.294   150   2
    31   aIfDSo   54   2.076   2.230   145   1
    32   aIfDSo   55   2.205   2.315   154   2

    speed:1742
    noncerate[GH/s]:67.417 (2.107/chip)
    hashrate[GH/s]:67.043
    good:4709
    errors:38
    spi-errors:0
    miso-errors:0
    jobs:375 (record[GH/s]:67.059)

    0:   869   34.331   34.277   2398   20   0   0
    4:   873   33.086   32.766   2311   18   0   0
    -:| www.DOTMog.com |:-

  • spiccioli
    Legendary
    *
    Offline Offline

    Activity: 1379
    Merit: 1003

    nec sine labore


    View Profile
    September 22, 2013, 07:01:56 PM
     #176
    Quote from: darkfriend77 on September 22, 2013, 02:59:21 PM
    Seems like I'm getting the best results with clockspeed btw. 54 - 55 ...


    Inside miner's code there is this comment

    Code:
    //maximum chip speed available for auto tuner
    //speed/nrate/hrate/watt
    //   53/   97/  100/  84
    //   54/   98/  107/  88
    //   55/  101/  115/  93
    //   56/   99/  125/  99

    So yes, 55 is speed with max noncerate.

    spiccioli

  • ForeRunnerz
    Newbie
    *
    Offline Offline

    Activity: 6
    Merit: 0


    View Profile
    September 22, 2013, 11:13:20 PM
     #177
    Hey guys

    I have two EOL boards, 1 is currently plugged in at the end of the chain, I was wondering if I can put in the other EOL board thats not being used after the other EOL thats plugged in?


    Thanks in advanced for your help..

  • Keefe
    Hero Member
    *****
    Offline Offline

    Activity: 681
    Merit: 500


    View Profile
    September 23, 2013, 12:57:03 AM
     #178
    Quote from: ForeRunnerz on September 22, 2013, 11:13:20 PM
    Hey guys

    I have two EOL boards, 1 is currently plugged in at the end of the chain, I was wondering if I can put in the other EOL board thats not being used after the other EOL thats plugged in?


    Thanks in advanced for your help..

    If you have a v1 M-board, you can only use 1 EOL H-board. If you have a v2 M-board, you can use as many as 4 EOL H-boards, but still at the end of the chains.
    OTC Rating

  • gmannn
    Full Member
    ***
    Offline Offline

    Activity: 148
    Merit: 100


    View Profile
    September 23, 2013, 05:52:41 AM
     #179
    Does anyone have input on my underperforming board?  It looks like there are a lot of MISO errors but I don't know which chip is producing them or how to disable the chip.

    Code:
    1       AIfDSo  55      0.773   1.638   54      41      0       1       155     [4:0]   704     2 5 4 3 4 4 5 2 2 2 2 3 4 5 3 4         3 1 2 3 2 2 1 4 4 4 4 3 2 1 3 2
    2       AIfDSo  55      1.603   1.797   112     9       0       0       170     [4:1]   651     7 7 7 5 7 6 6 7 7 7 7 7 8 8 8 8         1 1 1 2 0 1 1 0 0 0 1 1 0 0 0 0
    3       AIfDSo  55      1.446   1.659   101     7       0       0       157     [4:2]   661     6 6 7 6 6 6 6 6 6 6 7 7 6 6 7 7         1 1 0 1 1 0 0 0 0 1 0 0 1 1 0 0
    4       AIfDSo  55      1.518   1.712   106     3       0       0       162     [4:3]   657     7 7 7 7 7 7 7 7 6 7 6 6 6 7 7 5         0 0 0 0 0 0 0 0 1 0 0 0 1 0 0 1
    5       AIfDSo  55      1.403   1.564   98      6       0       13      148     [4:4]   666     6 7 7 7 7 7 6 6 6 7 5 5 5 6 7 4         1 0 0 0 0 0 0 0 0 0 1 1 0 0 0 3
    6       AIfDSo  55      0.673   0.962   47      7       0       6       91      [4:5]   709     3 2 3 3 4 4 3 2 2 4 3 3 2 3 3 3         0 1 0 1 0 0 1 1 1 0 1 1 0 0 0 0
    7       AIfDSo  55      1.188   1.585   83      16      0       4       150     [4:6]   681     6 5 4 5 5 3 5 6 5 6 6 6 6 7 4 4         0 1 2 1 0 4 2 1 1 1 1 0 0 0 0 2
    8       AIfDSo  55      0.544   0.581   38      3       0       10      55      [4:7]   718     2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3         0 0 0 0 0 0 1 0 1 1 0 0 0 0 0 0
    9       AIfDSo  55      1.460   1.638   102     20      0       2       155     [4:8]   658     5 4 7 5 6 6 8 7 8 8 6 6 5 7 7 7         3 1 0 1 0 2 0 1 0 0 2 3 3 2 1 1
    10      AIfDSo  55      0.129   0.127   9       2       0       8       12      [4:9]   747     1 1 1 1 0 0 1 1 1 1 0 0 0 0 0 1         0 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0
    11      AIfDSo  55      0.630   1.036   44      42      0       11      98      [4:A]   716     3 5 2 2 0 3 4 3 4 3 4 2 1 3 2 3         3 1 3 1 6 3 2 3 2 2 1 4 4 2 3 2
    12      AIfDSo  55      1.303   1.363   91      20      0       6       129     [4:B]   670     6 5 5 7 6 6 2 4 4 1 8 9 9 6 6 7         2 1 2 0 1 1 2 1 2 4 0 0 0 1 1 2
    13      AIfDSo  55      1.188   1.406   83      16      0       2       133     [4:C]   677     7 8 5 5 6 6 5 6 7 4 4 3 3 4 5 5         0 0 1 1 1 1 1 0 0 2 3 2 3 1 0 0
    14      AIfDSo  55      1.317   1.448   92      18      0       2       137     [4:D]   669     7 7 5 5 7 8 5 8 6 7 5 5 4 6 3 4         0 0 1 2 1 0 1 0 0 2 1 1 4 0 2 3
    15      AIfDSo  55      0.429   0.592   30      6       0       4       56      [4:E]   727     2 3 2 2 1 2 4 2 2 1 2 2 2 1 1 1         0 0 0 0 0 0 0 1 1 1 1 0 0 1 0 1
    16      AIfDSo  55      1.203   1.406   84      27      0       4       133     [4:F]   677     7 4 7 7 6 6 5 6 4 5 5 3 5 4 5 5         0 1 1 2 0 2 2 1 4 1 0 4 1 4 3 1
    speed:880 noncerate[GH/s]:16.808 (1.050/chip) hashrate[GH/s]:20.516 good:1174 errors:243 spi-err:0 miso-err:73 jobs:373 cores:9% good:16 bad:0 off:0 (best[GH/s]:0.000) Mon Sep 23 05:46:49 2013
    4:      880     16.808  20.516  1174    243     0       73      16      0       0       (1.050/chip)    9%

  • Foofighter
    Hero Member
    *****
    Offline Offline

    Activity: 882
    Merit: 547


    BTC Mining Hardware, Trading and more


    View Profile
    September 23, 2013, 05:53:58 AM
     #180
    have you tried to use another slot on mboard?
    ex official Canaan Distributor (Cryptouniverse)
    Pages: « 1 2 3 4 5 6 7 8 [9] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 »
      Print  
Page 8
Viewing Page: 9

IRLBTC™ © 2025 IRLBTC.com