What screw do you mean? My Mhz are 300 if I put  450Mhz  it doesn't work well. If I bought a hub that admitted more voltage, would it work too?

Thanks!

How many NewPac and at what frequency can they run with this hub?

So at the end with gradual increase of Mhz and tuning of voltage I managed to get both miners to run on 500Mhz around 115Gh/s stable. Do you guys reckon there is more to be gained or should I be happy with it as it is now?

Thanks

That link goes to one that only puts out 1.3A at 12v so no way would it be  enough.

Appreciate all the information.  I ended up ordering this as a starter hub.

https://www.419mining.com/shop/cables/plugable-usb-2-0-7-port-hub-with-60w-power-adapter/

Yep.  419Mining indicated I could run up to 4 sticks and overclock based on cooling.  I have 1 now.  3 more on the way.  I have the 1 running at 200MHz on CKPool.  When the others arrive Ill slowly turn up the frequency.  Not ready to be playing with voltage.  

I decided to start tinkering with frequency with just the one.  Here is my code.  Placed within the text_mining bat file.


However, I cannot achieve 300Mhz and I am eventually forced down to 200Mhz.  An Asic Plateau.  I have active cooling and the miner is cool to the touch.  Could it be the difficulty?

https://s1065.photobucket.com/user/vickersja/media/Capture.png.html

Edit - for the past 30 minutes or so the frequency has been holding steady at 200Mhz.  However, I have it set higher.

Windows 10.  Here is the PC:  https://smile.amazon.com/gp/product/B082XFWBDS

2* USB 3.0 Port
2* USB 2.0 Port

And here is the Hub:  https://www.419mining.com/shop/cables/plugable-usb-2-0-7-port-hub-with-60w-power-adapter/

Image of my setup:  https://s1065.photobucket.com/user/vickersja/media/thumbnail_IMG_4624.jpg.html

Thanks 419Mining.  I moved to the 2.0 port in the back and will report back.  Can you share the rational behind the difficulty at 32?  The instructions that came with the miner indicate that setting, but I have seen different difficulties on these boards.  Appreciate it!