so it connects to miner, does dashboard show whether pools are active? show any hash rate? have you tried setting everything to auto setting wise? have you tried all 3 modes?


sorry if I am asking dumb questions - just trying to get the full picture.

does it ever go back to the dashboard? or you have to shut it down and turn it back on to get to the dashboard?

if so, what does it do if you just turn it on and leave it alone? dashboard stays up but miner is not mining?

ahh ok gotcha.

one more question - and then I am at a loss.

how does your network assign ip addresses? is it possible that it has a different ip address?

how did you find the ip address the first time? if you know your way around the router you could check to see if it gave it a new one.

Digibyte uses multiple algorithms

I've been having the same problem for around a week. Miner was working for approx. 5 months without any problems. I can pull up the dashboard but when I try to start the miner it gives me the message 'Error: connect ECONNREFUSED 127.0.0.1:4028'
Miner being shown as ONLINE and temperature is being shown. I have changed replaced the SD card and set the fan speed to 25%. This has not changed anything. The YELLOW light is constantly flashing on the miner.......

Can anyone give me some help here? MAybe somebody from Futurebit themeselves have some ideas??? Seems a shame that the miner only lasted 5 months (on ECO setting) not overclocked!

Lol just found after nearly 9 Month after i get my Miner the Raw Stats button 
There are some nice statistics and infos .
Also i have to say that the miner works awesome since i got it and i never got any trouble or issues with it !

Nice work jstefanop , awesome !

No I havent moved or altered anything for the past many months. The miner is connected with a LAN cable direkt to my router as it always has been. I have never used the WIFI option. Network is good. The miner does not start anymore and flashes yellow. What can I do? What does the yellow light mean?

so my internet went out last night for about an hour, I was sitting at my desk when it occurred. So, I shut off the Apollo. When power came back on, I turned the Apollo on and though I can get to the UI and log into the miner, it will not run. It stays at "offline" I have restarted by using the restart option in the UI and by using the switch on the PSU - it will not start up. I removed the SD card and reinserted it (has worked in the past to get it up and running)

Is there a log we can look at to see what the error is? Is there a way to check the SD card to see if it is now corrupted?


update: I found the instructions for flashing the SD card here https://bt.irlbtc.com/view/5081750

Followed them to a T and am glad to say the miner is back up and hashing away!

2nd update: that was short lived, it hashed for about 2 mins then went back to "offline" and solid red light.

on second reboot, its hashing but to the donation address and it will not let me change the pool info - the pool page wont load.

ahhh - found the issue. It was because I was already in the UI - once I closed the page and re-opened it, the UI prompted me to do the initial setup

so glad to report - it is back up and hashing away!