Bitcointalk Mobile Browser presented by IRLBTC™

Dogie's Miner Setup Guides:

	ASICMiner Blade ASICMiner Cube ASICMiner Tube ASICMiner Prisma Avalon Avalon2 Avalon Avalon3 Avalon Avalon4 Avalon Avalon6 SpondooliesTech SP10 SpondooliesTech SP20 SpondooliesTech SP30 SpondooliesTech SP35 Technobit HEX16B Technobit HEX8A1 Technobit HEX4M Technobit 2HEX4M KNCMiner Saturn/Jupiter	Bitmain AntMiner S1 Bitmain AntMiner S2 Bitmain AntMiner S3 Bitmain AntMiner S4 Bitmain AntMiner S4+ Bitmain AntMiner S5 Bitmain AntMiner S7 Bitmain AntMiner C1 Bitmain AntMiner U3 RockMiner R-Box RockMiner New R-Box RockMiner R3-Box RockMiner T1 HashCoins Apollo HashCoins Ares NonceTech Sampo Yiazo YBF	BTCGarden AMV1 Bitmine Coincraft Desk V2 HashRatio Tsunami XBTech Pacific 1250 BitCrane T-110 Black Arrow Prospero X1 AMT 1.25TH C-Scape HexFury USB C-Scape BiFury USB MoonlightMiner NanoFury II USB Gigampz PSU breakout board Guide meta thread DefaultTrust Visualisation Power Supply analysis guide Manufacturer trustworthiness guide
	_________________________________________	_________________________________________	_________________________________________

Nicely formatted version available at dogiecoin.com!

Contents:
0a) What to Expect
0b) What You Need
1) Powering
2) Cooling
3a) Configuration
3b) Overclocking (optional)
4) Troubleshooting
5) Where to buy

0a) What to Expect (top)
The NanoFury II board is designed by vs3 and features 2 Bitfury chips. It ships in a USPS cardboard sleeve and is wrapped in both copious amounts of bubble
wrap and static paper.

Chips	2x Bitfury gen2
Hashrate	~4GH stock, ~5GH OC'ed
Rated Voltage	5V
Rated Current	0.9A at stock, up to 1.9A OC'ed
Power.Consumption	4.5-9.5W

0b) What You Need (top)
You will need the following:

A host windows PC.
A 1A+ USB hub (see below).

1) Powering (top)
NanoFury IIs are USB based miners, and as such are powered directly from a USB hub. Hub choice is extremely important when running multiple miners,
although external power is not required. The USB2 specification is designed to provide up to 0.5A, USB3 0.9A and so USB3 is strongly recommended.

Plug in the USB hub's power adapter into the mains and the USB hub.
Plug the NanoFury II into USB hub.

USB 3 Hub:
(Click.your.flag)

2) Cooling (top)
External cooling is not strictly required at stock speeds, but is strongly recommended any higher than 4GH. This can be done with the use of a simple 120mm
fan or a USB powered fan. Please be careful when handling this heatsink as the fins are very thin and so extremely sharp.

120mm Fans:
(Click.your.flag)

USB fan:
(Click.your.flag)

3a) Configuration (top)
Configuration is straight forward. Both BFG and CGMiner are currently supported and a Windows based PC is therefore recommended.

BFGMiner:

Plug in a USB cable from your USB hub to your PC.
Power the NanoFury II as above and turn the hub on.
No drivers need to be installed.
Download BFGMiner and run it.
Create a new text file using notepad, with your pool and miner information in it, as below. Save it as a .bat file in the same directory as BFGMiner.
Run the bat file to start mining.
It may take up to 5 minutes for 3.7-4GH to be achieved.

If you want to change pool, create a .bat file in notepad. Move the stratum proxy to the location below and put the following text inside for different pools.
Change pool port and address for different pools.

Antpool ^Register!

Code:

bfgminer.exe -o stratum.antpool.com:3333 -u username_worker -p anypassword

BTCGuild ^Register!

Code:

bfgminer.exe -o stratum.btcguild.com:3333 -u username_worker -p anypassword

GHash IO ^Register!

Code:

bfgminer.exe -o us1.ghash.io:3333 -u username_worker -p anypassword

3b) Overclocking (optional) (top)
Overclocking is required in order to hit 5GH.

Press M to manage devices.
Press O to enter a new oscillator bit rate.
50 is default, 53 is standard OCing, 55-56 is tested cap. Do NOT exceed this. Press enter to submit the change.
Each chip is controlled separately, so press down to see the second chip and repeat.
Pressing D and then Z clears the stats so you can see the changes quicker.
If you have set the oscillator too high then the hardware % will rise above 5% and the chip will be reset often. If this is the case, lower the rate. Chip b
will likely max out 1 bit below chip a.

4) Troubleshooting (top)
TBD as problems arise.

Legal disclaimer: This information is for general guidance and does not constitute expert advice. We are not responsible if you, your property or a third
party is injured or damaged as a result of any interaction with this information, and no warranty is provided. All text and images are covered by copyright.

5) Where to buy (top)