Bitcointalk Mobile Browser presented by IRLBTC™

Dogie's Miner Setup Guides:

	ASICMiner Blade ASICMiner Cube ASICMiner Tube ASICMiner Prisma Avalon Avalon2 Avalon Avalon3 Avalon Avalon4 Avalon Avalon6 SpondooliesTech SP10 SpondooliesTech SP20 SpondooliesTech SP30 SpondooliesTech SP35 Technobit HEX16B Technobit HEX8A1 Technobit HEX4M Technobit 2HEX4M KNCMiner Saturn/Jupiter	Bitmain AntMiner S1 Bitmain AntMiner S2 Bitmain AntMiner S3 Bitmain AntMiner S4 Bitmain AntMiner S4+ Bitmain AntMiner S5 Bitmain AntMiner S7 Bitmain AntMiner C1 Bitmain AntMiner U3 RockMiner R-Box RockMiner New R-Box RockMiner R3-Box RockMiner T1 HashCoins Apollo HashCoins Ares NonceTech Sampo Yiazo YBF	BTCGarden AMV1 Bitmine Coincraft Desk V2 HashRatio Tsunami XBTech Pacific 1250 BitCrane T-110 Black Arrow Prospero X1 AMT 1.25TH C-Scape HexFury USB C-Scape BiFury USB MoonlightMiner NanoFury II USB Gigampz PSU breakout board Guide meta thread DefaultTrust Visualisation Power Supply analysis guide Manufacturer trustworthiness guide
	_________________________________________	_________________________________________	_________________________________________

Nicely formatted version available at dogiecoin.com!

Contents:
0a) What to Expect
0b) What You Need
1) Powering
2) Cooling
3) Configuration
4) Troubleshooting
5) Where to buy

0a) What to Expect (top)
The BiFury is designed by c-scape and features 2 Bitfury generation chips. It ships in a USPS cardboard sleeve and is wrapped in copious amounts of static paper.

Chips	2x Bitfury gen2
Hashrate	~5GH stock
Rated Voltage	5V
Rated Current	0.9A
Power.Consumption	4.5W

0b) What You Need (top)
You will need the following:

A host windows PC.
A 1A+ USB hub (see below).

1) Powering (top)
BiFurys are USB based miners, and as such are powered directly from a USB hub. Hub choice is extremely important when running multiple miners. The USB2
specification is designed to provide up to 0.5A, and USB3 0.9A and so USB3 is strongly recommended.

Plug in the USB hub's power adapter into the mains and the USB hub.
Plug the BiFury into USB hub.

USB 3 Hub:
(Click.your.flag)

2) Cooling (top)
External cooling is not strictly required at stock speeds, but is strongly recommended. This can be done with the use of a 120mm or USB powered fan.

120mm Fans:
(Click.your.flag)

USB fan:
(Click.your.flag)

3) Configuration (top)
Configuration is straight forward. Both BFG and CGMiner are currently supported and a Windows based PC is therefore recommended.

BFGMiner:

Plug in a USB cable from your USB hub to your PC.
Power the BiFury as above and turn the hub on.
No drivers need to be installed.
Download BFGMiner and run it.
Create a new text file using notepad, with your pool and miner information in it, as below. Save it as a .bat file in the same directory as BFGMiner.
Run the bat file to start mining.

Antpool ^Register!

Code:

bfgminer.exe -o stratum.antpool.com:3333 -u username_worker -p anypassword

BTCGuild ^Register!

Code:

bfgminer.exe -o stratum.btcguild.com:3333 -u username_worker -p anypassword

GHash IO ^Register!

Code:

bfgminer.exe -o us1.ghash.io:3333 -u username_worker -p anypassword

4) Troubleshooting (top)
TBD as problems arise.

Legal disclaimer: This information is for general guidance and does not constitute expert advice. We are not responsible if you, your property or a third
party is injured or damaged as a result of any interaction with this information, and no warranty is provided. All text and images are covered by copyright.

5) Where to buy (top)