Bitcointalk Mobile Browser presented by IRLBTC™

<< >> (p.229)

Author

Topic: ANTMINER S3+ Discussion and Support Thread (Read 710630 times)

xstr8guy

Hero Member

Offline

Activity: 784
Merit: 1004

Glow Stick Dance!

Re: ANTMINER S3 Discussion and Support Thread.

August 10, 2014, 05:57:53 AM

#4561

Quote from: 1Neptune on August 10, 2014, 05:54:37 AM

Quote from: xstr8guy on August 10, 2014, 05:25:55 AM

Quote from: JennaK on August 10, 2014, 01:57:47 AM

Is there anyone here that can post what PSU they have and if its powering an overclocked antminer s3?
I am a dumb girl that can't figure out this whole PSU situation
I can't choose between a CX500, CX600 or CX750 per antminer.
The cost between those power supplies are quite a bit for me.
HELP!

WHAT CONFUSES ME IS THAT SOME PEOPLE SAY I SHOULD GET A PSU WITH 4 SEPERATE PCI-E connections.
SOME PEOPLE SAY THE ANTMINER S3 will overclock well on 2 SEPERATE PCI-E CONNECTIONS.

I can't choose!

Please stop!

You've been given great advice about a dozen times now. You're either trolling or severely mentally handicapped.

I must agree with xstr8guy... you've been given good to great advice from quite a few people. I said previously to stop over thinking this issue. Now you're beating a dead horse and becoming a pest about it. Plus you didn't answer my question if you're blonde.

Buy a psu from the recommendations, live with the decision as any of the recommendations will serve the purpose you seek. Move on. Issue should be closed now.

Does it matter? C'mon don't we all know that "Jenna" is a dude? Cheesy

xstr8guy

Hero Member

Offline

Activity: 784
Merit: 1004

Glow Stick Dance!

Re: ANTMINER S3 Discussion and Support Thread.

August 10, 2014, 05:59:42 AM

#4562

Quote from: maxwellga on August 10, 2014, 05:56:44 AM

This may have been asked somewhere else, but how can I order 3 S3's and use my three remaining coupons on the one order? Or can I only use one coupon per order of 2 miners?

One coupon per miner... just like at the supermarket. Wink

1Neptune

Sr. Member

Offline

Activity: 241
Merit: 250

Re: ANTMINER S3 Discussion and Support Thread.

August 10, 2014, 06:03:11 AM

#4563

Quote from: xstr8guy on August 10, 2014, 05:57:53 AM

Quote from: 1Neptune on August 10, 2014, 05:54:37 AM

Quote from: xstr8guy on August 10, 2014, 05:25:55 AM

Quote from: JennaK on August 10, 2014, 01:57:47 AM

Please stop!

You've been given great advice about a dozen times now. You're either trolling or severely mentally handicapped.

Does it matter? C'mon don't we all know that "Jenna" is a dude? Cheesy

No, doesn't matter. Blonde syndrome affects male and female alike.

maxwellga

Newbie

Offline

Activity: 14
Merit: 0

Re: ANTMINER S3 Discussion and Support Thread.

August 10, 2014, 06:06:45 AM

#4564

Quote from: xstr8guy on August 10, 2014, 05:59:42 AM

Quote from: maxwellga on August 10, 2014, 05:56:44 AM

This may have been asked somewhere else, but how can I order 3 S3's and use my three remaining coupons on the one order? Or can I only use one coupon per order of 2 miners?

One coupon per miner... just like at the supermarket. Wink

That's what I thought. I ordered 3 on the site, and at checkout changed the 1 to 3 on the coupons, but it only applied one. How can I fix this, and order 3 with the three coupons?

JennaK

Newbie

Offline

Activity: 42
Merit: 0

Re: ANTMINER S3 Discussion and Support Thread.

August 10, 2014, 06:09:07 AM

#4565

http://s29.postimg.org/gt8d0ri5j/IMG_6512.jpg

I'm dirty blonde if you want to call it that....

psahx

Full Member

Offline

Activity: 154
Merit: 100

Re: ANTMINER S3 Discussion and Support Thread.

August 10, 2014, 06:41:18 AM

#4566

Quote from: JennaK on August 10, 2014, 06:09:07 AM

I'm dirty blonde if you want to call it that....

Damn! You got a pretty face for a scammer, shame on you Grin

canonsburg

Full Member

Offline

Activity: 133
Merit: 100

Re: ANTMINER S3 Discussion and Support Thread.

August 10, 2014, 06:48:26 AM

#4567

How much did you pay that girl to write that?

psahx

Full Member

Offline

Activity: 154
Merit: 100

Re: ANTMINER S3 Discussion and Support Thread.

August 10, 2014, 06:57:11 AM

#4568

Quote from: canonsburg on August 10, 2014, 06:48:26 AM

How much did you pay that girl to write that?

Nothing, he got it like a bonus Grin

1Neptune

Sr. Member

Offline

Activity: 241
Merit: 250

Re: ANTMINER S3 Discussion and Support Thread.

August 10, 2014, 07:00:08 AM

#4569

Quote from: psahx on August 10, 2014, 06:41:18 AM

Quote from: JennaK on August 10, 2014, 06:09:07 AM

I'm dirty blonde if you want to call it that....

Damn! You got a pretty face for a scammer, shame on you Grin

And a Cannuck too....

MoreBloodWine

Legendary

Offline

Activity: 1064
Merit: 1001

Re: ANTMINER S3 Discussion and Support Thread.

August 10, 2014, 07:12:54 AM

#4570

Maybe jennas the one takin the pic and the chics the girlfriends ? Stranger things have happened but damn that girls got fine written on her lol

To be decided...

allcoinminer

Hero Member

Offline

Activity: 784
Merit: 504

Re: ANTMINER S3 Discussion and Support Thread.

August 10, 2014, 07:27:25 AM

#4571

Quote from: JennaK on August 10, 2014, 06:09:07 AM

I'm dirty blonde if you want to call it that....

There is no need to claim you are a female or male here to participate.
Being honest is the point. You are getting ignored many times is just because of your -ve trust ratings.
Being a male or female make any sense here.

Tupsu

Legendary

Offline

Activity: 1204
Merit: 1003

Re: ANTMINER S3 Discussion and Support Thread.

August 10, 2014, 07:31:07 AM

#4572

Quote from: xstr8guy on August 10, 2014, 05:57:53 AM

....
Does it matter? C'mon don't we all know that "Jenna" is a dude? Cheesy

https://twitter.com/JennaKLouden

booradlly

Newbie

Offline

Activity: 29
Merit: 0

Re: ANTMINER S3 Discussion and Support Thread.

August 10, 2014, 07:38:44 AM

#4573

I'm guessing this is not normal?

https://i.imgur.com/fymGVXjl.jpg
https://i.imgur.com/Mr400HGl.jpg

MoreBloodWine

Legendary

Offline

Activity: 1064
Merit: 1001

Re: ANTMINER S3 Discussion and Support Thread.

August 10, 2014, 07:40:15 AM

#4574

Quote from: booradlly on August 10, 2014, 07:38:44 AM

I'm guessing this is not normal?

Nope, somethin fried there.

To be decided...

allcoinminer

Hero Member

Offline

Activity: 784
Merit: 504

Re: ANTMINER S3 Discussion and Support Thread.

August 10, 2014, 07:40:52 AM

#4575

Quote from: booradlly on August 10, 2014, 07:38:44 AM

I'm guessing this is not normal?

[IM]https://i.imgur.com/fymGVXjl.jpg[/img]
[IM]https://i.imgur.com/Mr400HGl.jpg[/img]

Seems like you overclocked the miner. right? or you applied a non standard DC input?
A change of that capacitor will fix your issue. Those resistors are damaged of not?

GrandMasterB

Newbie

Offline

Activity: 28
Merit: 0

Re: ANTMINER S3 Discussion and Support Thread.

August 10, 2014, 07:43:04 AM

#4576

I can get to the initial "LuCI - Lua Configuration Interface" but after that it craps out. This is the 2nd S3 I have set up on this router. Anyone got an idea why?

MoreBloodWine

Legendary

Offline

Activity: 1064
Merit: 1001

Re: ANTMINER S3 Discussion and Support Thread.

August 10, 2014, 07:46:03 AM

#4577

Quote from: allcoinminer on August 10, 2014, 07:40:52 AM

Quote from: booradlly on August 10, 2014, 07:38:44 AM

I'm guessing this is not normal?

[IM]https://i.imgur.com/fymGVXjl.jpg[/img]
[IM]https://i.imgur.com/Mr400HGl.jpg[/img]

Seems like you overclocked the miner. right? or you applied a non standard DC input?
A change of that capacitor will fix your issue. Those resistors are damaged of not?

If overclocking did that, I'm not sure I want to try and OC mine now. I am one of a lucky few that got four S3 miners that work stable at 440Gh/s on sock freq 218.75.

To be decided...

allcoinminer

Hero Member

Offline

Activity: 784
Merit: 504

Re: ANTMINER S3 Discussion and Support Thread.

August 10, 2014, 07:47:10 AM

#4578

Quote from: MoreBloodWine on August 10, 2014, 07:46:03 AM

Quote from: allcoinminer on August 10, 2014, 07:40:52 AM

Quote from: booradlly on August 10, 2014, 07:38:44 AM

I'm guessing this is not normal?

[IM]https://i.imgur.com/fymGVXjl.jpg[/img]
[IM]https://i.imgur.com/Mr400HGl.jpg[/img]

Seems like you overclocked the miner. right? or you applied a non standard DC input?
A change of that capacitor will fix your issue. Those resistors are damaged of not?

If overclocking did that, I'm not sure I want to try and OC mine now. I am one of a lucky few that got four miners that work stable at 440Gh/s on sock freq 218.75.

With this hardware, overclocking id risky.

MoreBloodWine

Legendary

Offline

Activity: 1064
Merit: 1001

Re: ANTMINER S3 Discussion and Support Thread.

August 10, 2014, 07:48:24 AM

#4579

Quote from: allcoinminer on August 10, 2014, 07:47:10 AM

Quote from: MoreBloodWine on August 10, 2014, 07:46:03 AM

Quote from: allcoinminer on August 10, 2014, 07:40:52 AM

Quote from: booradlly on August 10, 2014, 07:38:44 AM

I'm guessing this is not normal?

[IM]https://i.imgur.com/fymGVXjl.jpg[/img]
[IM]https://i.imgur.com/Mr400HGl.jpg[/img]

Seems like you overclocked the miner. right? or you applied a non standard DC input?
A change of that capacitor will fix your issue. Those resistors are damaged of not?

If overclocking did that, I'm not sure I want to try and OC mine now. I am one of a lucky few that got four miners that work stable at 440Gh/s on sock freq 218.75.

With this hardware, overclocking id risky.

But the question at hand is did you OC and get that damage from it and if so, what freq was it on and what did you jump to from it ?

There's been plenty of people OC here and none I have seen reported these kinds of issues.

To be decided...

1Neptune

Sr. Member

Offline

Activity: 241
Merit: 250

Re: ANTMINER S3 Discussion and Support Thread.

August 10, 2014, 07:52:15 AM

#4580

Quote from: GrandMasterB on August 10, 2014, 07:43:04 AM

I can get to the initial "LuCI - Lua Configuration Interface" but after that it craps out. This is the 2nd S3 I have set up on this router. Anyone got an idea why?

insufficient data

Pages: « 1 ... 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 [229] 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 ... 515 »

Page 228

Viewing Page: 229