Yup Same here, for me M's Antmonitor crashes on a dot net error, and CGremote Can't query the Api to get the pool data.

Good thing i only flashed 1 Ant, i wonder if you can downgrade the Firmware to go back 1 version so i can get it to display properly.

after you upgrade it, you need to save and restart from the new Freq Tab, than you'll get your proper speed.

No point in me upgrading firmware then. I've tried every other frequency under the sun and I just get either disastrous instability or dead chips. But then I haven't tried 219 yet. Swear I must've got a dud unit or something as it seriously sucks that I can't even seem to hold it at the 440 gh/s the S3's are rated for...

  you need to click on status that will show you information.

i know how you feel, i got a pair from B2 and 1 is stable at default around 430ish, the other is a real lemon, doesn't matter what freq i try, it always fall back to around 390ish, reboot, new paste, switch the control board. but i least today i received another pair of units from B6 and these are stable at default for 440ish.

Well, if you had read the pages, you'd have known to let your S3s run for 24 hours or so (instead of just an hour) to get them to settle in order to get a more accurate average hash rate.

still have coupons. what to do with it?

Please do not use BFL Single SC power supply units to power your S3s or any device for that matter.  There's a good reason why a whole lot of BFL preorder victims (including me) refrained from using them and opted to use ATX PSUs instead.  The workmanship and the quality of their components are substandard to say the least.  They're known to produce some spectacular fireworks.  Hopefully, the following videos would dissuade you from proceeding with your plan:

https://www.youtube.com/watch?v=jGVYHYfzEq4

https://www.youtube.com/watch?v=3iabWK8EIgc

Make a gift to someone until they are still valid...

I am curious has anyone had any RMA issues with Bitmain ?  i have provided them with the order ID and I am still having the hardest time getting RMA information from them.  They have demanded I perform a test with something called a multimeter (which i do not own, i had to go purchase one)  so i could test the chains.  My s3 device pretty much bricked itself with a firmware upgrade.  I cannot access the UI, the ip is not found (never changed from default).  I used an ipsniffer, and still zilch....anyhow, i am curious to know how Bitmain has dealt with RMA requests from others.   Thanks