This one: https://github.com/KBomba/ccmonitor ?

Last update was 3 years ago and there are no instructions on how to use it.

Hello,

Getting this error when ./ccminer on Ubuntu 16.04 from a source build:

"Your system does not support CUDA 9.1 API!"

I took a look and please correct me, but the error should probably read "Your driver does not support..." instead of system as it seems to point to a driver mismatch with the sdk.

$ lsmod | grep -i nvidia
nvidia_uvm            667648  0
nvidia_drm             45056  0
nvidia_modeset        860160  1 nvidia_drm
nvidia              13139968  2 nvidia_modeset,nvidia_uvm
drm_kms_helper        167936  1 nvidia_drm
drm                   356352  3 nvidia_drm,drm_kms_helper

$ nvidia-smi  
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 384.111                Driver Version: 384.111                   |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GTX 1070    Off  | 00000000:01:00.0 Off |                  N/A |
|  0%   38C    P0    29W 151W |      0MiB  8108MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
                                                                              
+-----------------------------------------------------------------------------+
| Processes:                                                       GPU Memory |
|  GPU       PID   Type   Process name                             Usage      |
|=============================================================================|
|  No running processes found                                                 |
+-----------------------------------------------------------------------------+

Is there a particular package I should install (or not have installed)?

Thanks for your time!

i'm very sorry, but where is the link for 2.2.5 version? i see it on the pools, but no on github. Thanks!

I havent mined this but her's suprnova parameters...
It would be helpful to lookat the instructions for mining each pool...

ccminer -a bitcore -o stratum+tcp://btx.suprnova.cc:3629 -u Weblogin.Worker -p Worker password

Could you please consider to add x16r algorithm (Ravencoin) into the ccminer?

https://bt.irlbtc.com/view/2752467.0;all

The only device you will be using is the one card. Does yiimp require you to set the intensity level? I think the difficulty level should be 16 vs. 32. Maybe if you had multiple 1080 ti s you would increase difficulty settings. See if yiimp has any recommended settings for their pool. the other biggy is that you need to select a pool which is relatively close. if your in north america you don't want to select a pool in europe and vice versa. Your going to have to experiment to make sure ccminer does not crash too often. The other major thing you have not mentioned is if your using msi afterburner. you need to download this and immediately reduce your power down to 70-72%. if your not your going to burn out your graphics card.

How do I reduce my power- Memory Clock or CPU Clock or Power limit?

My current settings are in MSI afterburner core coltage 0, power limit 100, Core clock 0, Memory Clock 0, Fan speed auto.
using 250watt  CPU between 60celsius and 75c  GPU 68c and 70c
Thank you

Did anybody get ccminer working with Nvidia Tesla GPUs?

I tried it with a Tesla K80/M60? Whenever I try, it usually says what the latest block is but no mining activity.

I'm getting 100% CPU utilization when using ccminer and mining Garlicoin...This is killing my hashrates on my 5 GTX 1070 Ti rig. (CPU: Intel G3920)


Is there a fix for this?

Suprnovas dashboard has been weird for some time. I usually check my stats under my workers and general pool stats to make sure things are working.