I would also like to know this - anyone tried the new drivers out and would like to share his/her experience?

I am not sure if I should try it or not because my rig is just running perfectly stable and I dont want to risk that........

I am a micro miner, one GPU card in my desktop computer, and no programmer, just an "end consumer".  I am using the precompiled windows 64 version of ccminer 2.2.2 from GitHub.  The miner works, but I am unable to increase the intensity level when scrypt mining.  No matter what intensity I set in the command line using the -i function, no matter where in the command line I put the -i function, and even though it initially assigns more threads, it then reverts to a different (?default) intensity a few lines down. My gpu doesn't even warm up, and the hash rate is low.  Rather than overclocking my GPU, I would prefer to increase the intensity so that it works harder.  How do I get it to actually run with the intensity settings I want? This is what I see:


D:\ccminer-x64-2.2.2-cuda9>ccminer-x64 -a scrypt -o stratum+tcp://us.multipool.us:XXX -u theXXX.1 -p XXX -i 14.99

*** ccminer 2.2.2 for nVidia GPUs by tpruvot@github ***
Built with VC++ 2013 and nVidia CUDA SDK 9.0 64-bits
Originally based on Christian Buchner and Christian H. project
Include some kernels from alexis78, djm34, djEzo, tsiv and krnlx.

BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)

[2017-11-08 06:34:23] Adding 16128 threads to intensity 14, 32512 cuda threads
[2017-11-08 06:34:23] Starting on stratum+tcp://us.multipool.us:XXX
[2017-11-08 06:34:23] NVML GPU monitoring enabled.
[2017-11-08 06:34:23] NVAPI GPU monitoring enabled.
[2017-11-08 06:34:23] 1 miner thread started, using 'scrypt' algorithm.
[2017-11-08 06:34:24] Stratum difficulty set to 131072 (2.00000)
[2017-11-08 06:34:24] scrypt block 1631827, diff 10898.083
[2017-11-08 06:34:25] GPU #0: 32 hashes 4.0 MB per warp.
[2017-11-08 06:34:26] GPU #0: Performing auto-tuning, please wait 2 minutes...
[2017-11-08 06:34:26] GPU #0: maximum total warps (BxW): 1484
[2017-11-08 06:34:45] Stratum difficulty set to 256 (0.00391)
[2017-11-08 06:34:45] scrypt block 1631828, diff 8720.082
[2017-11-08 06:35:09] scrypt block 1631829, diff 8720.082
[2017-11-08 06:36:47] GPU #0: 589791.16 hash/s with configuration T12x11
[2017-11-08 06:39:34] scrypt block 1631830, diff 8720.082
[2017-11-08 06:39:34] GPU #0: using launch configuration T12x11
[2017-11-08 06:39:34] scrypt block 1631831, diff 8720.082
[2017-11-08 06:39:34] GPU #0: Intensity set to 12.0313, 4224 cuda threads
[2017-11-08 06:39:34] scrypt factor set to 9 (1024)

I XXX'd out the actual pool, worker name, password, but you can see where I attempted to set the intensity to 14.99 in the command line, was assigned extra threads, then lower down the intensity was changed to 12.0313 with only a fraction of the threads.  I have also tried with setting the T levels myself in advance, so that the auto-tuning does not occur, same result. Any help would be appreciated.  Thank you in advance.