Fully agree,  every BCT OP should have a strong First Post. 

You guys really need to get a good designer on the job, i, like many will not touch this coin due to the "lame" looking OP.
You cant be taken serious with such half assed work like that.

Harsh, but thanks for being open. The main reasoning behind keeping the original OP text unchanged (aside from updates) is so that it's transparent. Now that dcrdocs is up and running, the original OP text can be archived so it can still be accessed and the text can be updated. RFP-7 is all about design, so Decred will get more polished with a new landing site as well (including a blog). It'll be quite the change from what there is now, which is good, as it will allow Decred's identity to grow with the software as it matures.

Fully agree,  every BCT OP should have a strong First Post. 

You guys really need to get a good designer on the job, i, like many will not touch this coin due to the "lame" looking OP.
You cant be taken serious with such half assed work like that.

Two new mainnet stake pools are now online! Check out stakepool.eu and dcr.stakepool.net. You can also look at their dedicated threads on the forum (stakepool.eu and dcr.stakepool.net). OP text has been updated with links to these stake pools.

can you tell me exactly and with very basic  instructions that how i can get my airdrop coins out ?

i tried a few things :

first i downloaded latest version of program from github ( May ) , i did all instructions with this program .

but when i was importing my wallet by 33 seed words it was just waiting nothing done .

so i tried all steps again with old version ( february )

i created my wallet and imported from 33 seed words .

but there was an error at last 3rd cmd window , that said client is never connected , after i checked 2nd window i saw there same error .

after that i opened last version again and i tried to reach my wallet there .

but cant do that .

now i have wallet created with these information :

user name - password - private passphrase and public passphrase

so from here what i have to do to reach my coins and send them to poloniex for selling ?

@pool.mn
@maxminers

u must low down the minimum cashout for the small miners

thanks in advance

I created a bitstream for the ZTEX 1.15y board and want to share it with the decred community.  If you have a ZTEX 1.15y board, you should be able to mine DCR using this modified cgminer and bitstream.

I have put the bitstream at the following link.  It gets about 800Mh/s.

    https://www.dropbox.com/s/j1d12ixhfthj0y7/ztex_ufm1_15y1.bit?dl=0

The cgminer is located at the following link:

    https://github.com/sprocket-fpga/cgminer_3.7.2_ztex

Below are the steps I used to modify Decred cgminer 0.0.5 to run on my Raspberry Pi.

    1) sudo apt-get update
    2) sudo apt-get install libusb-1.0-0-dev libusb-1.0-0 libcurl4-openssl-dev libncurses5-dev libudev-dev screen libtool automake pkg-config libjansson-dev
    3) git clone https://github.com/decred/cgminer
    4) cd cgminer
    5) sudo ./autogen.sh
    6) sudo ./configure --disable-adl --enable-icarus
    7) copy .c and .h files to cgminer directory
    8 ) copy .bit to cgminer\bitstreams
    9) sudo make
    10) Command Line: cgminer --disable-gpu --blake256 -o < url:port > -u < username > -p < password > --ztex-clock 100:100

Note: This miner only works on Getwork pools. It does not have the Stratum logic incorporated yet.

Open Issue: This miner seems to work fine for up to 4 ztex boards. More than 4 boards is causing the cgminer to crash after 10 minutes.  If you have any ideas how to fix this issue, please PM me.

-----------------------------------------------------------------------------------------------

If you find this miner useful, please feel free to leave a tip:

  BTC: 14QcqFWZ9Y1j1aUHeUNySoMr4t9ZWJYt2a
  DCR: Dsj6WcnPYDPxDr99pQkTKeFsfh55KBJS2jY