<<  >> (p.34)
    Author Topic: ethminer-0.9.41-genoil-1.1  (Read 397410 times)

    • Genoil (OP)
    Sr. Member
    ****
    Offline Offline

    Activity: 438
    Merit: 250


    View Profile
    May 22, 2016, 06:22:41 PM
     #661
    Quote from: CryptoSalad on May 21, 2016, 11:31:01 PM
    Will their be any more updates to this miner? By this I mean for more management on how hard you can push your card to work. Like in Claymore's miner you can set how hard and by default cards are set to intensity of 9 and can do less to put less stress on card. Hoping you guys come up with something like this in the future.

    Half global-work or grid size until you are satisfied. So 4096, 2048, 1024 etc.

    I'll add a more traditional intensity parameter in an upcoming release.
    ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d
    BTC: 1Nu2fMCEBjmnLzqb8qUJpKgq5RoEWFhNcW

  • hawkfish007
    Hero Member
    *****
    Offline Offline

    Activity: 895
    Merit: 504


    View Profile
    May 22, 2016, 09:30:34 PM
     #662
    For some reason after upgrading to Crimson 16.5.2.1 or any version after 15.12, my 5 R9-390s mine slower from 148-150 MH/s to 120-124 MH/s, same thing happened w/ NH miner. However, Claymore dual miner was able to mine at the same speed. Can this be fixed?
    For quality risers, splitters or 133 CFM fans, please visit my eBay listings,
    http://www.ebay.com/sch/hawkfish007/m.html?_ipg=50&_sop=12&_rdc=1

  • adamvp
    Hero Member
    *****
    Offline Offline

    Activity: 1246
    Merit: 708



    View Profile
    May 23, 2016, 12:35:34 AM
     #663
    Quote from: Genoil on May 22, 2016, 06:16:19 PM
    Quote from: adamvp on May 21, 2016, 09:32:50 PM
    and I have to ask once again about failover exactly..
    because I didn't notice the answer and I am stuck..

    How to write failover command?

    if I have fe: pool1 pool2 and pool3..

    ethminer -G -S pool1 datas and?...

    -S pool1 -FS pool2 -O credentials1 -FO credentials2.

    You can omit -FO when it's identical to -O.

    Thanks, I think it should be pin to first post Wink
    I am looking for signature campaign Wink pm me

  • bensam1231
    Legendary
    *
    Offline Offline

    Activity: 1848
    Merit: 1024


    View Profile
    May 23, 2016, 11:21:16 AM
     #664
    Quote from: adamvp on May 23, 2016, 12:35:34 AM
    Quote from: Genoil on May 22, 2016, 06:16:19 PM
    Quote from: adamvp on May 21, 2016, 09:32:50 PM
    and I have to ask once again about failover exactly..
    because I didn't notice the answer and I am stuck..

    How to write failover command?

    if I have fe: pool1 pool2 and pool3..

    ethminer -G -S pool1 datas and?...

    -S pool1 -FS pool2 -O credentials1 -FO credentials2.

    You can omit -FO when it's identical to -O.

    Thanks, I think it should be pin to first post Wink

    Weird the readme I have must be from a older version of the program. It doesn't list the FS command.
    I buy private Nvidia miners. Send information and/or inquiries to my PM box.

  • ShodanPT
    Newbie
    *
    Offline Offline

    Activity: 4
    Merit: 0


    View Profile
    May 23, 2016, 04:17:34 PM
     #665
    I just switched from QTMiner to genoil 1.0.9 and after 2 hours of running on ethermine.org I've gotten 2 stale shares and 35 good shares @20MH/s (AMD 380).

    Is this normal?

    After running QTMiner on 24H it didn't produce a single stale share.

    Edit: PS: The stale shares are only reported in ethermine, in the console all shares are valid.

  • Genoil (OP)
    Sr. Member
    ****
    Offline Offline

    Activity: 438
    Merit: 250


    View Profile
    May 24, 2016, 12:55:47 PM
     #666
    1.1 pre-release is out:

    https://github.com/Genoil/cpp-ethereum/tree/110/

    - no more DAG files (both CUDA/OpenCL)
    - CUDA Compute 2.0 support is back

    It looks like it's all working but I'm releasing early so you can help me test. Don't forget to remove your -E and -R params, that is all gone now.

    CPU util seems down, RAM usage down of course. CPU validation is still in there, using the light cache.

    no devfee, but do send me some ETH if you like it  Grin
    ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d
    BTC: 1Nu2fMCEBjmnLzqb8qUJpKgq5RoEWFhNcW

  • adaseb
    Legendary
    *
    Offline Offline

    Activity: 4004
    Merit: 1757



    View Profile
    May 24, 2016, 12:57:13 PM
     #667
    Quote from: Genoil on May 24, 2016, 12:55:47 PM
    1.1 pre-release is out:

    https://github.com/Genoil/cpp-ethereum/tree/110/

    - no more DAG files (both CUDA/OpenCL)
    - CUDA Compute 2.0 support is back

    It looks like it's all working but I'm releasing early so you can help me test. Don't forget to remove your -E and -R params, that is all gone now.

    CPU util seems down, RAM usage down of course. CPU validation is still in there, using the light cache.

    no devfee, but do send me some ETH if you like it  Grin

    So during DAG change it shouldn't crash?
     
     RAZED      		| 
     100% 
    WELCOME
    BONUS
    		│
    █████████████████████
    █████████████████████████
    ████████████▀░░░░▀███████
    ██████████▀░░▄▀▀▄░░▀█████
    ██████████▄▄██▄▄██▄░▀████
    █████▀░░░░░░░▀██░░█░░████
    ████░░████▀▀█░░██▀░░▄████
    ████░░████▄▄█░░█░░▄██████
    ████░░█▀▀████░░██████████
    ████░░█▄▄███▀░░██████████
    █████▄░░░░░░░▄███████████
    █████████████████████████
    █████████████████████
    █████████████████████
    █████████████████████████
    ██████████▀▀░░░░░▀▀██████
    ████████▀░░▄▄█░░▀▄░░█████
    ██████▀░░▄█████▄░░▀░░████
    █████░░▄████▄▀░░█▄▄░░████
    ████░░▄███▄▀░░▄▀██▀░░████
    ████░░▀▀██░░▄▀███▀░░█████
    ████░░▄░░▀█████▀░░▄██████
    █████░░▀▄░░█▀▀░░▄████████
    ██████▄▄░░░░░▄▄██████████
    █████████████████████████
    █████████████████████
    		| 
     NO 
    KYC
    		| 
      RAZE THE LIMITS   ► PLAY NOW     

  • Genoil (OP)
    Sr. Member
    ****
    Offline Offline

    Activity: 438
    Merit: 250


    View Profile
    May 24, 2016, 01:10:06 PM
     #668
    Quote from: adaseb on May 24, 2016, 12:57:13 PM
    Quote from: Genoil on May 24, 2016, 12:55:47 PM
    1.1 pre-release is out:

    https://github.com/Genoil/cpp-ethereum/tree/110/

    - no more DAG files (both CUDA/OpenCL)
    - CUDA Compute 2.0 support is back

    It looks like it's all working but I'm releasing early so you can help me test. Don't forget to remove your -E and -R params, that is all gone now.

    CPU util seems down, RAM usage down of course. CPU validation is still in there, using the light cache.

    no devfee, but do send me some ETH if you like it  Grin

    So during DAG change it shouldn't crash?

    haven't tested that yet.
    ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d
    BTC: 1Nu2fMCEBjmnLzqb8qUJpKgq5RoEWFhNcW

  • maxvall
    Sr. Member
    ****
    Offline Offline

    Activity: 268
    Merit: 250


    View Profile
    May 24, 2016, 03:15:48 PM
     #669
    Quote from: Genoil on May 24, 2016, 12:55:47 PM
    1.1 pre-release is out:

    https://github.com/Genoil/cpp-ethereum/tree/110/

    - no more DAG files (both CUDA/OpenCL)
    - CUDA Compute 2.0 support is back

    It looks like it's all working but I'm releasing early so you can help me test. Don't forget to remove your -E and -R params, that is all gone now.

    CPU util seems down, RAM usage down of course. CPU validation is still in there, using the light cache.

    no devfee, but do send me some ETH if you like it  Grin
    Oh, Genoil, you are awesome! Cheesy
    Thanks!
    I'll test it ASAP.

  • scryptr
    Legendary
    *
    Offline Offline

    Activity: 1798
    Merit: 1028



    View Profile WWW
    May 24, 2016, 03:35:10 PM
     #670
    Quote from: Genoil on May 24, 2016, 01:10:06 PM
    Quote from: adaseb on May 24, 2016, 12:57:13 PM
    Quote from: Genoil on May 24, 2016, 12:55:47 PM
    1.1 pre-release is out:

    https://github.com/Genoil/cpp-ethereum/tree/110/

    - no more DAG files (both CUDA/OpenCL)
    - CUDA Compute 2.0 support is back

    It looks like it's all working but I'm releasing early so you can help me test. Don't forget to remove your -E and -R params, that is all gone now.

    CPU util seems down, RAM usage down of course. CPU validation is still in there, using the light cache.

    no devfee, but do send me some ETH if you like it  Grin

    So during DAG change it shouldn't crash?

    haven't tested that yet.

    PRE-RELEASE BUILT AND RUNNING--

    At least, the DAG file is being generated.  I removed my "-E" and "-R" flags, but is there a flag for GPU DAG file generation, or is that feature on by default?

    The version label is still set at 1.0.8, by the way.  Early, but the only bug I see.       --scryptr
    SCRYPTR'S NOTEBOOK: https://bt.irlbtc.com/view/5035515.msg46035530#msg46035530
    GITHUB: "github.com/scryptr"  MERIT is appreciated, also.  Thanks!

  • Genoil (OP)
    Sr. Member
    ****
    Offline Offline

    Activity: 438
    Merit: 250


    View Profile
    May 24, 2016, 03:55:32 PM
     #671
    Quote from: scryptr on May 24, 2016, 03:35:10 PM
    Quote from: Genoil on May 24, 2016, 01:10:06 PM
    Quote from: adaseb on May 24, 2016, 12:57:13 PM
    Quote from: Genoil on May 24, 2016, 12:55:47 PM
    1.1 pre-release is out:

    https://github.com/Genoil/cpp-ethereum/tree/110/

    - no more DAG files (both CUDA/OpenCL)
    - CUDA Compute 2.0 support is back

    It looks like it's all working but I'm releasing early so you can help me test. Don't forget to remove your -E and -R params, that is all gone now.

    CPU util seems down, RAM usage down of course. CPU validation is still in there, using the light cache.

    no devfee, but do send me some ETH if you like it  Grin

    So during DAG change it shouldn't crash?

    haven't tested that yet.

    PRE-RELEASE BUILT AND RUNNING--

    At least, the DAG file is being generated.  I removed my "-E" and "-R" flags, but is there a flag for GPU DAG file generation, or is that feature on by default?

    The version label is still set at 1.0.8, by the way.  Early, but the only bug I see.       --scryptr

    You sure you checked out the right branch? Version is set to 1.1

    And no there is no flag. To hell with dag files Grin
    ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d
    BTC: 1Nu2fMCEBjmnLzqb8qUJpKgq5RoEWFhNcW

  • restless
    Legendary
    *
    Offline Offline

    Activity: 1151
    Merit: 1001


    View Profile
    May 24, 2016, 04:18:31 PM
     #672
    Is there Windows build?

  • Genoil (OP)
    Sr. Member
    ****
    Offline Offline

    Activity: 438
    Merit: 250


    View Profile
    May 24, 2016, 04:20:40 PM
     #673
    Quote from: restless on May 24, 2016, 04:18:31 PM
    Is there Windows build?

    Yes in the releases folder of 110 branch (CUDA compute 5.2 only, OpenCL AMD+ NVidia)
    ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d
    BTC: 1Nu2fMCEBjmnLzqb8qUJpKgq5RoEWFhNcW

  • restless
    Legendary
    *
    Offline Offline

    Activity: 1151
    Merit: 1001


    View Profile
    May 24, 2016, 04:36:26 PM
     #674
    damn it.
    I stayed like 15min on https://github.com/Genoil/cpp-ethereum/tree/110 trying all possible links
    Then just wrotereleases and voila :/ https://github.com/Genoil/cpp-ethereum/blob/110/releases/ethminer-0.9.41-genoil-1.1.zip

  • scryptr
    Legendary
    *
    Offline Offline

    Activity: 1798
    Merit: 1028



    View Profile WWW
    May 24, 2016, 04:40:41 PM
     #675
    HOW DO I CLONE VERSION 110? --

    I must have cloned the current version 1.0.8 from GIT.  How do I clone the v110?  I have researched, but am not familiar with "checkout" commands. Working in Linux, here.       --scryptr
    SCRYPTR'S NOTEBOOK: https://bt.irlbtc.com/view/5035515.msg46035530#msg46035530
    GITHUB: "github.com/scryptr"  MERIT is appreciated, also.  Thanks!

  • Genoil (OP)
    Sr. Member
    ****
    Offline Offline

    Activity: 438
    Merit: 250


    View Profile
    May 24, 2016, 04:47:18 PM
     #676
    Quote from: scryptr on May 24, 2016, 04:40:41 PM
    HOW DO I CLONE VERSION 110? --

    I must have cloned the current version 1.0.8 from GIT.  How do I clone the v110?  I have researched, but am not familiar with "checkout" commands. Working in Linux, here.       --scryptr

    cd cpp-ethereum
    git checkout 110

    I think, I tend to forget these things. If it doesn't work because you cloned the repo earlier, git pull first.
    ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d
    BTC: 1Nu2fMCEBjmnLzqb8qUJpKgq5RoEWFhNcW

  • jstefanop
    Legendary
    *
    Offline Offline

    Activity: 2205
    Merit: 1404


    View Profile
    May 24, 2016, 06:50:22 PM
     #677
    Quote from: Genoil on May 24, 2016, 12:55:47 PM
    1.1 pre-release is out:

    https://github.com/Genoil/cpp-ethereum/tree/110/

    - no more DAG files (both CUDA/OpenCL)
    - CUDA Compute 2.0 support is back

    It looks like it's all working but I'm releasing early so you can help me test. Don't forget to remove your -E and -R params, that is all gone now.

    CPU util seems down, RAM usage down of course. CPU validation is still in there, using the light cache.

    no devfee, but do send me some ETH if you like it  Grin

    awesome job! If this proves to be stable wont need claymour's miner to run my 9-10 GPU rigs Wink will definitely send some eth your way!

    Code:
    ℹ  14:46:38|stratum  Received new job #f89025a1
      ℹ  14:46:38|gpuminer0  set work to: #f89025a1, target  #0000000112e0be82
      ℹ  14:46:38|gpuminer1  set work to: #f89025a1, target  #0000000112e0be82
      ℹ  14:46:38|gpuminer2  set work to: #f89025a1, target  #0000000112e0be82
      ℹ  14:46:38|gpuminer3  set work to: #f89025a1, target  #0000000112e0be82
      ℹ  14:46:38|gpuminer4  set work to: #f89025a1, target  #0000000112e0be82
      ℹ  14:46:38|gpuminer5  set work to: #f89025a1, target  #0000000112e0be82
      ℹ  14:46:38|gpuminer6  set work to: #f89025a1, target  #0000000112e0be82
      ℹ  14:46:38|gpuminer7  set work to: #f89025a1, target  #0000000112e0be82
      ℹ  14:46:38|gpuminer8  set work to: #f89025a1, target  #0000000112e0be82
      m  14:46:39|ethminer  Mining on PoWhash #f89025a1 : 221.06MH/s [A25+0:R0+0:F0]
      m  14:46:41|ethminer  Mining on PoWhash #f89025a1 : 189.79MH/s [A25+0:R0+0:F0]
      m  14:46:43|ethminer  Mining on PoWhash #f89025a1 : 189.79MH/s [A25+0:R0+0:F0]
      m  14:46:45|ethminer  Mining on PoWhash #f89025a1 : 189.79MH/s [A25+0:R0+0:F0]
    Project Apollo: A Pod Miner Designed for the Home https://bt.irlbtc.com/view/4974036
    FutureBit Moonlander 2 USB Scrypt Stick Miner: https://bt.irlbtc.com/view/2125643.0

  • Genoil (OP)
    Sr. Member
    ****
    Offline Offline

    Activity: 438
    Merit: 250


    View Profile
    May 24, 2016, 07:01:47 PM
     #678
    I just ran a little test on both Nvidia (CUDA) and AMD (OpenCL) where I switched between current and next DAG every 5 blocks. No problems whatsoever. I don't have a multi-card rig, but I don't see how that should be any different, other than maybe a bit of clutter in the log output while changing DAGs.
    ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d
    BTC: 1Nu2fMCEBjmnLzqb8qUJpKgq5RoEWFhNcW

  • jstefanop
    Legendary
    *
    Offline Offline

    Activity: 2205
    Merit: 1404


    View Profile
    May 24, 2016, 07:13:45 PM
     #679
    Quote from: Genoil on May 24, 2016, 07:01:47 PM
    I just ran a little test on both Nvidia (CUDA) and AMD (OpenCL) where I switched between current and next DAG every 5 blocks. No problems whatsoever. I don't have a multi-card rig, but I don't see how that should be any different, other than maybe a bit of clutter in the log output while changing DAGs.

    Unfortunately DAGs are created so fast that the custom pcie bus we are running all these GPUs on is getting overloaded and the OpenCL calls hang. I guess I got lucky and it started the first time but quickly crashed.

    The only way to solve this issue is to implement the same serialization fix claymour did on his miner (i.e. generate DAGs one by one serially, and any OpenCL calls have to have a delay in them (especially when new work is pushed to all the GPUs). Unfortunately I don't think thats an easy fix with ethminer and how threaded it is.

    FYI this wont effect most users running less than 6 GPUs
    Project Apollo: A Pod Miner Designed for the Home https://bt.irlbtc.com/view/4974036
    FutureBit Moonlander 2 USB Scrypt Stick Miner: https://bt.irlbtc.com/view/2125643.0

  • Genoil (OP)
    Sr. Member
    ****
    Offline Offline

    Activity: 438
    Merit: 250


    View Profile
    May 24, 2016, 07:27:20 PM
     #680
    Quote from: jstefanop on May 24, 2016, 07:13:45 PM
    Quote from: Genoil on May 24, 2016, 07:01:47 PM
    I just ran a little test on both Nvidia (CUDA) and AMD (OpenCL) where I switched between current and next DAG every 5 blocks. No problems whatsoever. I don't have a multi-card rig, but I don't see how that should be any different, other than maybe a bit of clutter in the log output while changing DAGs.

    Unfortunately DAGs are created so fast that the custom pcie bus we are running all these GPUs on is getting overloaded and the OpenCL calls hang. I guess I got lucky and it started the first time but quickly crashed.

    The only way to solve this issue is to implement the same serialization fix claymour did on his miner (i.e. generate DAGs one by one serially, and any OpenCL calls have to have a delay in them (especially when new work is pushed to all the GPUs). Unfortunately I don't think thats an easy fix with ethminer and how threaded it is.

    FYI this wont effect most users running less than 6 GPUs

    This on 1.1 i assume. There's not so much going over the bus, just about 50-100MB of DAG cache. When did it actually crash? During DAG generation or during mining? Because when mining, it;s not really that much different from 1.0.8, other than some code commented out. It must be something else then this, perhaps removing all this DAG crap opened up another weird ethminer bug.
    ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d
    BTC: 1Nu2fMCEBjmnLzqb8qUJpKgq5RoEWFhNcW
    Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 [34] 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 ... 90 »
      Print  
Page 33
Viewing Page: 34

IRLBTC™ © 2025 IRLBTC.com