<<  >> (p.592)
    Author Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)  (Read 6591480 times)

    • rednoW
    Legendary
    *
    Offline Offline

    Activity: 1510
    Merit: 1003


    View Profile
    June 14, 2017, 06:27:13 AM
     #11821
    Need advice from Mister Claymore or someone else.
    I'm mining now at ethermine.org (Europe (France): eu1.ethermine.org:4444)
    The pool uses diff 40M

    My 3-4 cards rigs are doing fine, but I have 2 standalone comps with only one 30mhs card in each. And this one-card rigs have huge (5-15%) stale share rate reported by pool. all rigs have identical and fast Internet access with the multi-card rigs, 70-100ms latency to pool. Is it due to high pool diff and low (30mhs) rig speed? Is there a way to fix this without changing a pool? I can't move this cards to multi-card rigs ((
     
    I'm using latest Claymore 9.5 but older versions seem to behave the same.
    Thanx in advance

  • aarons6
    Legendary
    *
    Offline Offline

    Activity: 1736
    Merit: 1006


    View Profile
    June 14, 2017, 07:01:13 AM
     #11822
    Quote from: myty on June 12, 2017, 03:20:01 PM
    Quote from: myty on June 12, 2017, 06:43:51 AM
    Hello.
    I am using R9 380 Nitro Sapphire.
    When i am mining solo Ethereum all is working fine, but when i dual mine with DECRED I get GPU artefacts.
    Why is that?
    Thank you!

    anyone?

    my 380 does the same thing, i think its just not fast enough.

  • thaelin
    Newbie
    *
    Offline Offline

    Activity: 64
    Merit: 0


    View Profile
    June 14, 2017, 07:32:53 AM
     #11823
       Will take another try at this. Few days ago I posted that my 7 gtx 1060 machine will only find 3 of the cards with win7 ult64 os.  I decided to try this with ubu 16.04 as well with the same issue. This points to maybe a  MB setting as opposed to an OS setting. Can anyone shed a light on how to make all cards show up?  Both MB Asus  H270 and Z270

    Will be adding a MSI Z170A as well when the cards and risers show

    thaelin

  • ctmk01
    Newbie
    *
    Offline Offline

    Activity: 8
    Merit: 0


    View Profile
    June 14, 2017, 07:50:40 AM
     #11824
    Quote from: thaelin on June 14, 2017, 07:32:53 AM
      Will take another try at this. Few days ago I posted that my 7 gtx 1060 machine will only find 3 of the cards with win7 ult64 os.  I decided to try this with ubu 16.04 as well with the same issue. This points to maybe a  MB setting as opposed to an OS setting. Can anyone shed a light on how to make all cards show up?  Both MB Asus  H270 and Z270

    Will be adding a MSI Z170A as well when the cards and risers show

    thaelin


    For windows go win 10 64bit LTSB or go home. Simple

  • liomojo1
    Hero Member
    *****
    Offline Offline

    Activity: 676
    Merit: 500


    View Profile
    June 14, 2017, 08:14:12 AM
     #11825
    Guys are you getting with 280x previous 15mgh or it is down to 12.5 now?

  • ozoner99
    Newbie
    *
    Offline Offline

    Activity: 19
    Merit: 1


    View Profile
    June 14, 2017, 08:34:03 AM
     #11826
    Hi, I'm hoping someone can help me. I have a couple of MSI GTX1060s which hash nicely at around 23mhash on eth.  I just bought some Asus GTX 1060s, and they are sitting at 18.8 - if I push the memory past +600 in afterburner it will crash, and if I clock the core up by more than 100mhz it will crash as well.  Same everything as the MSI cards....

    Have I just managed to get a crap batch of cards?  Or is there somethiung I can do to squeeze some more rate out of these cards?

    Thanks in advance.

  • liomojo1
    Hero Member
    *****
    Offline Offline

    Activity: 676
    Merit: 500


    View Profile
    June 14, 2017, 08:43:34 AM
     #11827
    Did you put them in p0state , did you use the same driver? If the settings and clocks are the same then may be memory is different!

  • Teress
    Full Member
    ***
    Offline Offline

    Activity: 224
    Merit: 102


    View Profile
    June 14, 2017, 09:06:28 AM
     #11828
    Quote from: ctmk01 on June 14, 2017, 07:50:40 AM
    Quote from: thaelin on June 14, 2017, 07:32:53 AM
      Will take another try at this. Few days ago I posted that my 7 gtx 1060 machine will only find 3 of the cards with win7 ult64 os.  I decided to try this with ubu 16.04 as well with the same issue. This points to maybe a  MB setting as opposed to an OS setting. Can anyone shed a light on how to make all cards show up?  Both MB Asus  H270 and Z270

    Will be adding a MSI Z170A as well when the cards and risers show

    thaelin


    For windows go win 10 64bit LTSB or go home. Simple
    What is LTSB???

  • ozoner99
    Newbie
    *
    Offline Offline

    Activity: 19
    Merit: 1


    View Profile
    June 14, 2017, 09:10:35 AM
     #11829
    Quote from: liomojo1 on June 14, 2017, 08:43:34 AM
    Did you put them in p0state , did you use the same driver? If the settings and clocks are the same then may be memory is different!

    Hi, thanks for the reply. I don't believe it's possible to get the 1060 into p0 state - I tried and couldn't make it work. The MSI works fine without changing to p0 (it stays in p2 as well). A quick google shows nobody else is running p0 on that card either.

    The memory is hynix, according to GPU-Z.  Very strange - it's reproducible with one MSI card and one ASUS card int he same system - the ASUS card hashes about 4mh slower with the same EVERYTHING.

    Wonder if there's an old version of the bios I could try or something.... Any other ideas?

  • amirheavy666
    Full Member
    ***
    Offline Offline

    Activity: 231
    Merit: 101


    NEM (XEM) Top Coin


    View Profile
    June 14, 2017, 09:12:51 AM
     #11830
    Can mine one AMD graphic (example R9 390X ) and one Nvidia ( for example 1060) in same Pc

    what i must do for mining with claymore with this two graphic card ? Undecided Undecided Undecided
    Nem.io

  • athas1985
    Newbie
    *
    Offline Offline

    Activity: 14
    Merit: 0


    View Profile
    June 14, 2017, 09:20:28 AM
     #11831
    http://2.pik.vn/20170b5c0b2e-6891-454c-a393-69e343de3c3e.png
    Help why gpu5 failed

  • GH
    Member
    **
    Offline Offline

    Activity: 117
    Merit: 10


    View Profile
    June 14, 2017, 09:26:39 AM
     #11832
    Quote from: GH on June 13, 2017, 03:18:12 PM
    Quote from: Claymore on June 12, 2017, 09:40:46 PM
    Quote from: GH on June 12, 2017, 08:49:54 PM
    Claymore,
    the problem with ETHMan 3.1 + Dualminer 9.5
    If some rig go down, and then after some time goes up, it dosent restore in ETHMan, on screenshot you see that miner restarted and work, i launched web console and it works already 2 minutes, but ETHMan still show "lost ****". Even after 10 minutes ETHMan dosent see rig. So as it was with ETHMan 3.0, I need restart it to see all rigs stats again.

    If you included cryptography and https, then maybe here some trouble with ssl? need to update certificate if connection was lost?

    Can confirm this, same problem here.
    The last update of EthMan improved the 100% lock after a warning, but a rig which was offline and comes back up is not (always?) shown as alive until EthMan is restarted.
    Also the batch action is still not retriggered in case of a persisting failure.

    I spent half a day in attempts to reproduce it, but it works fine for me, weird. If you can 100% reproduce this issue I can prepare debug version with logging and send it to you so I can get more info. PM me if you want to participate.
    Retriggering: if a rig was lost, BAT file will be executed. If rig is back again and then again will be lost, BAT will be executed again. What's wrong exactly?

    I can not 100% reproduce it. Just had the error again two hours ago. Rig already back online but shown as offline for 2+ hours. But it does not happen always, some additional aspect I don't see at the moment must play a role here. But of course I can try to help if you have a logging debug version for me.

    Retriggering: as I already wrote - a single action may not be sufficient to bringt the rig back up. (i.e.: rig hangs - action triggered -> auto-reset rig - if windows boots into recovery mode because it is the x-th reset in a row you are ...... - the rig stays offline waiting for user input until infinity).
    So: if an action did not bring the rig back up after the same delay time, it should trigger the same action again and again until the problem is resolved. (Leaving out luxury options like number of max. attempts or configurable follow up delay  Grin)

    @claymore:

    1) Maybe I found a hint: Is it possible that it is some kind of IP address caching issue? It seems to happen to rigs which reboot and get another (dynamic) IP address. If I change the "IP" field in EthMan to the current numeric IP address or use an alternative DNS name which resolves to the same computer EthMan shows correct "up" state. If I change it to the old one its shown "down" again. Restarting EthMan seems to update these values and the rig ist shown online, even with the same old name ("IP" entry). Or it is some kind of update process which is only executed when adding/changing a rig entry. But maybe this helps...

    2) Did you read my comment about retriggering above and understand my issue?

  • Crypto_Future
    Member
    **
    Offline Offline

    Activity: 72
    Merit: 10


    View Profile
    June 14, 2017, 09:35:03 AM
     #11833
    how much does dual mining increase power consumption on rx470 GPU's?

    I am using -dcri 10 for minimum effect on ETH production

  • sigb0y
    Member
    **
    Offline Offline

    Activity: 79
    Merit: 10


    View Profile
    June 14, 2017, 09:44:27 AM
     #11834
    Quote from: athas1985 on June 14, 2017, 09:20:28 AM

    Help why gpu5 failed

    Looks like you have overclocked. Remove it, install original bios und hopefully it would run stable. If not, you have destroyed your GPU.
    keep mining or die trying

  • frostminer
    Hero Member
    *****
    Offline Offline

    Activity: 742
    Merit: 505


    View Profile WWW
    June 14, 2017, 09:44:56 AM
     #11835
    Quote from: Teress on June 14, 2017, 09:06:28 AM
    Quote from: ctmk01 on June 14, 2017, 07:50:40 AM
    Quote from: thaelin on June 14, 2017, 07:32:53 AM
      Will take another try at this. Few days ago I posted that my 7 gtx 1060 machine will only find 3 of the cards with win7 ult64 os.  I decided to try this with ubu 16.04 as well with the same issue. This points to maybe a  MB setting as opposed to an OS setting. Can anyone shed a light on how to make all cards show up?  Both MB Asus  H270 and Z270

    Will be adding a MSI Z170A as well when the cards and risers show

    thaelin


    For windows go win 10 64bit LTSB or go home. Simple
    What is LTSB???

    https://www.howtogeek.com/273824/windows-10-without-the-cruft-windows-10-ltsb-explained/

  • athas1985
    Newbie
    *
    Offline Offline

    Activity: 14
    Merit: 0


    View Profile
    June 14, 2017, 09:45:41 AM
     #11836
    Quote from: sigb0y on June 14, 2017, 09:44:27 AM
    Quote from: athas1985 on June 14, 2017, 09:20:28 AM
    http://2.pik.vn/20170b5c0b2e-6891-454c-a393-69e343de3c3e.png
    Help why gpu5 failed

    Looks like you have overclocked. Remove it, install original bios und hopefully it would run stable. If not, you have destroyed your GPU.
    no, i under lock
    SP nitro+
    1266 down to 1050

  • Claymore (OP)
    Donator
    Legendary
    *
    Offline Offline

    Activity: 1610
    Merit: 1325

    Miners developer


    View Profile
    June 14, 2017, 10:40:52 AM
    Last edit: June 14, 2017, 10:52:42 AM by Claymore
     #11837
    Quote from: GH on June 14, 2017, 09:26:39 AM
    @claymore:
    1) Maybe I found a hint: Is it possible that it is some kind of IP address caching issue? It seems to happen to rigs which reboot and get another (dynamic) IP address. If I change the "IP" field in EthMan to the current numeric IP address or use an alternative DNS name which resolves to the same computer EthMan shows correct "up" state. If I change it to the old one its shown "down" again. Restarting EthMan seems to update these values and the rig ist shown online, even with the same old name ("IP" entry). Or it is some kind of update process which is only executed when adding/changing a rig entry. But maybe this helps...
    2) Did you read my comment about retriggering above and understand my issue?

    Please test this version:
    https://mega.nz/#!C5xiUSYY!QY44OAExh5EQ2elGcH1DvfbkQMTkgMSwOEMLoG0lUCU
    Let me know if you still have the issue.

    DNS caching can cause some additional delays, but in a minute the lost rig must be found anyway.
    I will add retriggering in next update.

    Quote from: rednoW on June 14, 2017, 06:27:13 AM
    Need advice from Mister Claymore or someone else.
    I'm mining now at ethermine.org (Europe (France): eu1.ethermine.org:4444)
    The pool uses diff 40M

    My 3-4 cards rigs are doing fine, but I have 2 standalone comps with only one 30mhs card in each. And this one-card rigs have huge (5-15%) stale share rate reported by pool. all rigs have identical and fast Internet access with the multi-card rigs, 70-100ms latency to pool. Is it due to high pool diff and low (30mhs) rig speed? Is there a way to fix this without changing a pool? I can't move this cards to multi-card rigs ((
     
    I'm using latest Claymore 9.5 but older versions seem to behave the same.
    Thanx in advance

    40M? May be 4000M? Stale shares can be caused by delays in new job broadcasts from pool side if the pool sends new jobs to faster miners firstly. Though it's just an idea.
    Please read Readme and FAQ in the first post of this thread before asking any questions, probably the answer is already there.
    List of my miners: https://bt.irlbtc.com/view/3019607

  • GH
    Member
    **
    Offline Offline

    Activity: 117
    Merit: 10


    View Profile
    June 14, 2017, 11:35:42 AM
     #11838
    Quote from: Claymore on June 14, 2017, 10:40:52 AM
    Quote from: GH on June 14, 2017, 09:26:39 AM
    @claymore:
    1) Maybe I found a hint: Is it possible that it is some kind of IP address caching issue? It seems to happen to rigs which reboot and get another (dynamic) IP address. If I change the "IP" field in EthMan to the current numeric IP address or use an alternative DNS name which resolves to the same computer EthMan shows correct "up" state. If I change it to the old one its shown "down" again. Restarting EthMan seems to update these values and the rig ist shown online, even with the same old name ("IP" entry). Or it is some kind of update process which is only executed when adding/changing a rig entry. But maybe this helps...
    2) Did you read my comment about retriggering above and understand my issue?

    Please test this version:
    https://mega.nz/#!C5xiUSYY!QY44OAExh5EQ2elGcH1DvfbkQMTkgMSwOEMLoG0lUCU
    Let me know if you still have the issue.

    DNS caching can cause some additional delays, but in a minute the lost rig must be found anyway.
    I will add retriggering in next update.

    Thank you, downloaded, running and watching.

    Maybe another hint: even with this EthMan version and CDM 9.5 this procedure can produce an identical looking error: Use EthMan to send a "Restart Miner" command to a "read only management port" rig. After a few seconds it will be shown offline (although the client refuses the command because management interface is in read-only mode and just keeps mining) and can not be brought back until EthMan is restarted or the "IP" field was changed like in my post above.

  • wtfonly16
    Full Member
    ***
    Offline Offline

    Activity: 296
    Merit: 108


    View Profile
    June 14, 2017, 12:12:26 PM
     #11839
    WTF HE POST?Huh THEN ITS NOT 10% SCAM!!!
    ye i aint bares

  • pedronesbr
    Newbie
    *
    Offline Offline

    Activity: 1
    Merit: 0


    View Profile
    June 14, 2017, 12:24:25 PM
     #11840
    I HAVE A TROUBLE

    09:15:49:337   1eac   This pool (eu1.ethermine.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
    09:15:49:337   1eac   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
    09:15:49:337   1eac   Please read "Readme" file for details
    09:15:49:337   1eac   This pool (eu1.ethermine.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
    09:15:49:337   1eac   However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
    09:15:49:353   1eac   Please read "Readme" file for details
    09:15:49:353   1eac   Pool eu1.ethermine.org removed from the list
    09:15:49:353   1eac   ETH: No pools specified! Specify at least one valid pool in "-epool" parameter.

    SOMEONE CAN HELP?
    Pages: « 1 ... 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 [592] 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 ... 1409 »
      Print  
Page 591
Viewing Page: 592

IRLBTC™ © 2025 IRLBTC.com