Mining with Claymore and get full HDD (128GB SSD) in half hour.
After checking findvar/log/syslog and kern.log grown up to 52GB each.
System write this 4 messages about 4-5 thousands per second !
Jul 9 23:58:37 test-rig kernel: [ 1399.017519] VM fault (0x01, vmid 6) at page 135290427, read from 'TC3' (0x54433300) (196)
Jul 9 23:58:37 test-rig kernel: [ 1399.017554] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01c84801
Jul 9 23:58:37 test-rig kernel: [ 1399.017557] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x08105E39
Jul 9 23:58:37 test-rig kernel: [ 1399.017559] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001
Jul 9 23:58:37 test-rig kernel: [ 1399.017561] VM fault (0x01, vmid 6) at page 135290425, read from 'TC4' (0x54433400) (72)
Jul 9 23:58:37 test-rig kernel: [ 1399.017567] amdgpu 0000:01:00.0: GPU fault detected: 147 0x01f08801
Jul 9 23:58:37 test-rig kernel: [ 1399.017569] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x08105E3E
Jul 9 23:58:37 test-rig kernel: [ 1399.017570] amdgpu 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C088001
Jul 9 23:58:37 test-rig kernel: [ 1399.017572] VM fault (0x01, vmid 6) at page 135290430, read from 'TC6' (0x54433600) (136)
Jul 9 23:58:37 test-rig kernel: [ 1399.017607] amdgpu 0000:04:00.0: GPU fault detected: 147 0x01e84801
Jul 9 23:58:37 test-rig kernel: [ 1399.017610] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x08105E3D
Jul 9 23:58:37 test-rig kernel: [ 1399.017612] amdgpu 0000:04:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C048001
Despite this mine worked properly 24.3 MH/s on each card until the disk is full
Someone also stumbled upon a similar problem?
System:
Lubuntu 16.04 with amdgpu-pro_16.30.3
5x RX 480 8GB ref model
Asrock FM2A88X + BTC
Hi, i have the same problem in my new project :
http://simplemining.net/Anyway it doesnt bother mining and about logs you can turn then off:
as root execute this command and you will have no longer such problem
systemctl disable rsyslog.service
then delete big file logs fromvar/log/ adn reboot system, then it will work fine.
If you want i will release my
http://simplemining.net/ Operating System which will have this fix and many more + feature updates.
If you want make donation BTC: 1ERRVbvV23h51ScH73nQr6TDmaieKNuuVD
I'm running into the same problem in simpleMining OS.
1 - My pendrive is not full:
Filesystem Size Used Avail Use% Mounted on
udev 1.9G 0 1.9G 0%dev
tmpfs 390M 35M 356M 9%run
/dev/sda2 6.5G 2.1G 4.4G 33%
tmpfs 2.0G 0 2.0G 0%dev/shm
tmpfs 5.0M 0 5.0M 0%run/lock
tmpfs 2.0G 0 2.0G 0%sys/fs/cgroup
tmpfs 2.0G 8.0K 2.0G 1%var/log
tmpfs 2.0G 89M 1.9G 5%var/tmp
tmpfs 300M 16K 300M 1%tmp
tmpfs 2.0G 0 2.0G 0%var/log/apt
/dev/sda1 8.9M 3.5K 8.9M 1%mnt/user
tmpfs 390M 0 390M 0%run/user/1000
2 - Logs are disabled in claymore
3 - I've executed the sudo systemctl disable rsyslog.service command, didnt help.
4 - It only started to pop up when I plugged in the 3rd card.
5 - My hashing does not seem to be affected by it.
6 - It's a Z270-P Asus Prime MB.
