<<  >> (p.614)
    Author Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)  (Read 6591469 times)

    • TechPark
    Full Member
    ***
    Offline Offline

    Activity: 238
    Merit: 100


    View Profile
    June 21, 2017, 11:42:55 PM
     #12261
    Quote from: bobjones34 on June 21, 2017, 04:16:00 PM
    Quote from: TechPark on June 21, 2017, 12:47:33 PM
    Quote from: bobjones34 on June 21, 2017, 07:54:33 AM
    Quote from: TechPark on June 21, 2017, 02:23:33 AM
    Quote from: bobjones34 on June 20, 2017, 10:26:55 AM
    Hello,
    I am using Ethos and would like to run claymore with 6 gpu
    hope someone could point me in the right direction here (please !)
    You have to believe me here when i say that i have tried absolutley everything
    i have read here but i just cannot get 6 gpu working with this motherboard.
    With Claymore each gpu is at least 2 mh/s faster
    With ethminer i can run 5 stable(3 days)
    with both sgminer and claymore's the 6 gpu will start up and hash at 27 or so and the cut down to 4
    after 1 or 2 minutes.
    With sgminer it also does me the courtesy of telling me that the 2 gpu are sick then dead.
    This can be with any card in any slot,it always changes.
    I think somehow that that is the important part ?
    All cards and risers work fine and have been checked in different slots,different risers,individually,
    in groups and any combination you can think of.
    All the info on here i can find i have followed.
    So that's 4 gpu with claymore and sgminer,
    and 5 with ethminer.
    This is my first build and i have really enjoyed it so far,im looking forward to making more hopefully.
    but i have now been banging my head against a brick wall for 2 weeks now(starting to make a mess)
    Anyway i hope someone here has a clue for me.
    Cheers
    Provide more information about your setup: makes, models, versions, parameters, screenshots, troubleshooting steps taken...

    Sorry i forgot to post this bit:

    Operating system:Ethos
    mobo:Z170A GAMING PRO CARBON (MS-7A12)
    ram:4g
    Intel(R) Celeron(R) CPU G3900 @ 2.80GHz
    drive_name: KINGSTON SV300S37A120G
    GPU: 6x XFX rx480 8g one of which is the gtr black edition.
    PSU: Corsair hx1200i


    I have the same PSU, GPUs and CPU... Different MB and Win10. 6 cards in each rig. I have Z170 MB which I use for testing. If I have a spare time I might try to run 6 cards on it. If I were you I would try to seriously downvolt and downclock the cards, let us say half speed, to make sure that this is not related to current, voltage and temperature. If 6 runs with minimal speed than you can rule out drivers, OS, power and etc. I have seen comments that Z170A are the most problematic when it comes to 5+ cards. Have you tried another mobo?

    Thanks, i put them down to half speed and its been running for over a hour now at a stable 13 mh/s per card ,
    What would you recommend next,slowly increase ? i dont have another motherboard to try.
    thanks for your help

    Well. It tells that you do not have issues with drivers, risers, OS limitations. Focus on the power and temperature. Raise Fan speed to 70-80. Do not overclock the cards. Keep them downvolted (970-1000mV). Slowly increase Core clock and Mem clock.

  • spyder09
    Member
    **
    Offline Offline

    Activity: 60
    Merit: 10


    View Profile
    June 22, 2017, 01:01:25 AM
     #12262
    I know about the decreased hashrate i have been keeping up with the forum lately. i have a rx 570 and 580 in my rig at the moment. OpenCL crashed on my 570 causing my system to lockup and I restarted miner. before my 580 was hashing at 29.5 and my 570 was at 27.5. now after reboot and OC my 570 is still at 27.5 but my 580 is at 24. could the 580 be affected more? i would think that the decreased rate would affect both? any suggestions?

  • platitude
    Member
    **
    Offline Offline

    Activity: 103
    Merit: 10



    View Profile
    June 22, 2017, 01:55:43 AM
     #12263
    Quote from: spyder09 on June 22, 2017, 01:01:25 AM
    I know about the decreased hashrate i have been keeping up with the forum lately. i have a rx 570 and 580 in my rig at the moment. OpenCL crashed on my 570 causing my system to lockup and I restarted miner. before my 580 was hashing at 29.5 and my 570 was at 27.5. now after reboot and OC my 570 is still at 27.5 but my 580 is at 24. could the 580 be affected more? i would think that the decreased rate would affect both? any suggestions?
    Did you tried to restart miner?

  • spyder09
    Member
    **
    Offline Offline

    Activity: 60
    Merit: 10


    View Profile
    June 22, 2017, 02:54:28 AM
     #12264
    many times only thing I was able to do to get it somewhat close to where i was hashing was overclock core closer to factory settings...then driver crashed again. installed update will see how well it works

  • rampage999
    Newbie
    *
    Offline Offline

    Activity: 45
    Merit: 0


    View Profile
    June 22, 2017, 03:17:33 AM
     #12265
    Hi,

    Will mix RX 400 and RX 500 cause any problem?
    It seems after adding a RX 500 card into my RX 400 rig, the overclock via Claymore Dual Miner will not work anymore?

    Using Windows 10.

    Overclock via the miner does work in my other Windows 10 rig, same driver version 17.6.2

  • Vann
    Hero Member
    *****
    Offline Offline

    Activity: 1036
    Merit: 606



    View Profile
    June 22, 2017, 04:00:41 AM
     #12266
    Quote from: rampage999 on June 22, 2017, 03:17:33 AM
    Hi,

    Will mix RX 400 and RX 500 cause any problem?
    It seems after adding a RX 500 card into my RX 400 rig, the overclock via Claymore Dual Miner will not work anymore?

    Using Windows 10.

    Overclock via the miner does work in my other Windows 10 rig, same driver version 17.6.2

    I find setting the clock speeds via Claymore to be unstable and inconssitent at best, especially for multiple cards. I use MSI Afterburner to set the core clock, memory clock and undervolt for each card before starting the miner. Much more reliable that way.

  • preda
    Sr. Member
    ****
    Offline Offline

    Activity: 756
    Merit: 250


    View Profile
    June 22, 2017, 04:49:52 AM
     #12267
    Quote from: vapourminer on June 21, 2017, 02:56:12 PM
    Quote from: cirlama on June 21, 2017, 02:10:13 PM
    Quote from: preda on June 21, 2017, 01:43:35 PM
    Hi guys, why my nicehash app do use ethmine for mining ethereum with nvidia gtx1060?

    Instead if i use just rx 480 it do use claymore.

    Difference is claymore with nvidia 6x 1060 mining at 138
    With ethmine mining at 125mh so i would use claymore with nicehash always. How i could do?

    in Nicehash, you can deselect the algo you don't want to use
    If you want only Claymore and no algo switching, just deselect all the others

    or you can simply bypass the nicehash miner, run claymore directly and point it at nicehash. that is what i do.



    I did this... pointed nicehash stratum on claymore it has worked for all night long at speed 135 mh but in the status page nicehash says i learning 4 eur/day coz my hasharate is 60mh.... why in claymore i had 135 and in the nicehash status site it was so low?

    If i use the app it recognises 125mh using ethmine and estimated learn is 18 eur/day why happen this?

  • spyder09
    Member
    **
    Offline Offline

    Activity: 60
    Merit: 10


    View Profile
    June 22, 2017, 04:54:12 AM
     #12268
    update to issues I was having with bad hashrate after reboot. found windows was disabling my 570 after reboot had to reapply pixel patcher. also uninstalled and reinstalled 17.4.4 drivers and pixel patcher again. once i did this i noticed the damn taskbar isnt working with left clicks (windows 10) so after fucking with that for a while decided it wasnt worth it and started afterburner and hwinfo and miner. got 570 running at 27.9, 580 at 29.7, and 380 at 20.1 again. for now its staying as is Smiley

  • LJLT
    Newbie
    *
    Offline Offline

    Activity: 48
    Merit: 0


    View Profile
    June 22, 2017, 04:56:37 AM
     #12269
    Hi guys, today i tried ver 9.5 two of my rigss all good. But the third one when i double click the .bat file it opens and close the comand line window in micro seconds.

    I already deactivaded the win defender, dont know why this is happening.

    Can someone help me.

    Thanks

  • sheriff_br
    Newbie
    *
    Offline Offline

    Activity: 1
    Merit: 0


    View Profile
    June 22, 2017, 04:56:54 AM
     #12270
    Quote from: notbatman on May 31, 2017, 04:00:02 PM
    Quote from: KAOS247365 on May 31, 2017, 03:44:17 PM
    Hey you GUYS!!!!  Grin

    Does anyone know what the expected hashrate is currently for XFX HD 7990

    I have 3 of these mining Eth and I can't seem to get above 80 MH/s collectively  Undecided , is this normal even with the large DAG ?

    I'm using ethminer are there better ones that run on Windows? as I can't be jacked to setup a Linux box   Cheesy

    Any help would be appreciated.

    Cheers

    PS. I have a NVIDIA 1060 and it gets roughly on average 20.56 MH/s if that helps anyone benchmarking that model.  Grin

    I can get 155 MH/s on UBQ with 3x HD7990 running win 10 with stock drivers. Try a UBQ, EXP or MUSIC pool and get back to us.

    use this batch file:

    ubq_pasl.bat
    Code:
    @echo off

    setx GPU_FORCE_64BIT_PTR 0
    setx GPU_MAX_HEAP_SIZE 100
    setx GPU_USE_SYNC_OBJECTS 1
    setx GPU_MAX_ALLOC_PERCENT 100
    setx GPU_SINGLE_ALLOC_PERCENT 100

    ethdcrminer64.exe -tt 30,30,30,30,30,30 -mclock 1245,1245,1245,1245,1245,1245 -cclock 1024,1024,1024,1024,1024,1024 -asm 0 -allpools 1 -allcoins 1 -esm 0 -epool us.ubiqpool.io:8008 -ewal 0xYOUR_UBQ_WALLET_ADDRESS -epsw x -eworker microsloth -dpool pasl.fairpool.xyz:4009 -dwal YOUR_PASL_ACCOUNT_NUMBER -dpsw x -dcoin pasc -dcri 7

    or this bash file:

    ubq_pasl.sh
    Code:
    #!/bin/bash

    export GPU_FORCE_64BIT_PTR=0
    export GPU_MAX_HEAP_SIZE=100
    export GPU_USE_SYNC_OBJECTS=1
    export GPU_SINGLE_ALLOC_PERCENT=100
    export GPU_MAX_ALLOC_PERCENT=100

    sudo ./ethdcrminer64 -tt 30,30,30,30,30,30 -mclock 1245,1245,1245,1245,1245,1245 -cclock 1024,1024,1024,1024,1024,1024 -asm 0 -allpools 1 -allcoins 1 -esm 0 -epool us.ubiqpool.io:8008 -ewal 0xYOUR_UBQ_WALLET_ADDRESS -epsw x -eworker microsloth -dpool pasl.fairpool.xyz:4009 -dwal YOUR_PASC_ACCOUNT_NUMBER -dpsw x -dcoin pasc -dcri 7


    Hi peoples, I got a Radeon Sapphire Hd 7990 6gb.
    I downloaded the latest driver (AMD Radeon Software Crimson Edition 17.4.3 Driver for Windows® 10 64-bit​: http://www.sapphiretech.com/productdetial.asp?os=Win10_64&Pid=076248DD-C96B-46AD-976A-665D7185BDE6&tag=download&lang=eng).

    I configured my ETH surety, put the data in .bat:
    Code:
    setx GPU_FORCE_64BIT_PTR 0
    setx GPU_MAX_HEAP_SIZE 100
    setx GPU_USE_SYNC_OBJECTS 1
    setx GPU_MAX_ALLOC_PERCENT 100
    setx GPU_SINGLE_ALLOC_PERCENT 100

    EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal wall00x.Rig7990 -epsw x -mode 1

    However I get the following errors:

    Code:
    GPU #0: Tahiti, 3072 MB available, 32 compute units
    GPU #0 recognized as Radeon 280x
    GPU #1: Tahiti, 3072 MB available, 32 compute units
    GPU #1 recognized as Radeon 280x
    POOL/SOLO version
    GPU #0: algorithm ASM
    GPU #1: algorithm ASM
    No NVIDIA CUDA GPUs detected.
    Total cards: 2
    ...
    Setting DAG epoch #130 for GPU1
    Setting DAG epoch #130 for GPU0
    Create GPU buffer for GPU1
    Create GPU buffer for GPU0
    GPU0, OpenCL error -4 (0) - cannot create DAG  on GPU
    GPU 0 failed
    GPU0, OpenCL error -4 (0) - cannot create DAG  on GPU
    GPU 0 failed

    GPU1 DAG Creation time - 8520ms
    Setting DAG epoch #130 for GPU1 done
    ETH: 06/22/17-01:39:12 - New job from eu1.ethermine.org:4444
    ETH - Total Speed: 12.476 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
    ETH: GPU0 00.000 Mh/s, GPU1 12.476 Mh/s
    GPU0 t=50c fan=20%
    WATHDOG: GPU error you need restart a miner :(
    Restarting ok, exit...

    And crash.


    If I try to mine Zecash, the error is this:

    Code:
    GPU #0: Tahiti, 3072 MB available, 32 compute units
    GPU #0 recognized as Radeon 280x
    GPU #1: Tahiti, 3072 MB available, 32 compute units
    GPU #1 recognized as Radeon 280x
    POOL/SOLO version
    GPU #0: algorithm ASM, intensity 6
    GPU #1: algorithm ASM, intensity 6
    Watchdog enable
    Zec...
    ZEC: 06/22/17-02:09:12 - New job from eu1.ethermine.org:4444
    ZEC - Total Speed: 0.000 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
    ZEC: GPU0 0.000 H/s, GPU1 0.000 H/s
    GPU0 t=50c fan=20%
    GPU0 t=50c fan=20%
    WHATCHDOG: GPU 1 hangs in OpenCL call, exit
    WHATCHDOG: GPU 1 hangs in OpenCL call, exit
    WHATCHDOG: GPU 1 hangs in OpenCL call, exit
    WHATCHDOG: GPU 1 hangs in OpenCL call, exit
    Restarting ok, exit...

    And then it hangs.

    Anyone have any ideas how to solve this and make ETH mining work or Zcash? Preference for ETH!

    Note:
    Windows 10, 4Gb Ram DDR3, 1Tb HD.

    Virtual memory set on 40000mb.

  • NoOneLt
    Member
    **
    Offline Offline

    Activity: 140
    Merit: 10


    View Profile
    June 22, 2017, 06:00:27 AM
     #12271
    Hi guys, ETH+LBRY claymore gives GPU errors after some time and restarts mining. Same settings ETH+SIA - stable. Definitely not the PSU. 4x1060 rig. Any suggestions? Thanks!

  • preda
    Sr. Member
    ****
    Offline Offline

    Activity: 756
    Merit: 250


    View Profile
    June 22, 2017, 06:11:59 AM
     #12272
    Quote from: NoOneLt on June 22, 2017, 06:00:27 AM
    Hi guys, ETH+LBRY claymore gives GPU errors after some time and restarts mining. Same settings ETH+SIA - stable. Definitely not the PSU. 4x1060 rig. Any suggestions? Thanks!


    Your overclock?

  • ivanpop
    Newbie
    *
    Offline Offline

    Activity: 62
    Merit: 0


    View Profile
    June 22, 2017, 06:18:43 AM
     #12273
    Recently I purchased Nvidia 1060 6gb cards. I installed the latest 382.53 drivers and I'm using Windows 10 64-bit. I'm getting about 2.5mh on a card at stock clocks and while mining the system stutters and it's almost unusable. Any idea on what can be causing this?

  • mushtuk
    Newbie
    *
    Offline Offline

    Activity: 28
    Merit: 0


    View Profile
    June 22, 2017, 06:20:23 AM
     #12274
    Quote from: Klexicon on June 21, 2017, 09:51:13 PM

    I'm almost positive that I've read of people on Nvidia dual mining with these cards just fine.

    Any advise on how to fix it? If it can be fixed at all?

  • Qazo
    Full Member
    ***
    Offline Offline

    Activity: 211
    Merit: 101



    View Profile
    June 22, 2017, 06:30:02 AM
     #12275
    Quote from: Qazo on June 21, 2017, 02:29:56 PM
    Can anyone help me with problem, i'm cracking my head for more than a week now

    version 9.5, dual mining UBQ/DCR
    every hour when dev fee start and miner is changing to ETH pool my GPU0 hangs in openCL

    already tried to switch risers, checked all GPU, everything is fine with hardware...


    how i can solve this?



    anyone? @claymore?

    i added -nofee and it works but it's unfair to claymore... any solution to this?

  • NoOneLt
    Member
    **
    Offline Offline

    Activity: 140
    Merit: 10


    View Profile
    June 22, 2017, 06:33:11 AM
     #12276
    Quote from: preda on June 22, 2017, 06:11:59 AM
    Your overclock?
    +50 on every card GPU, +725..875 Memory depending on card, 95TDP.

    But ETH+SIA it is fully stable. LBRY more memory intensive?

  • Haidong Liang
    Newbie
    *
    Offline Offline

    Activity: 65
    Merit: 0


    View Profile
    June 22, 2017, 06:59:04 AM
     #12277
    Quote from: Qazo on June 22, 2017, 06:30:02 AM
    Quote from: Qazo on June 21, 2017, 02:29:56 PM
    Can anyone help me with problem, i'm cracking my head for more than a week now

    version 9.5, dual mining UBQ/DCR
    every hour when dev fee start and miner is changing to ETH pool my GPU0 hangs in openCL

    already tried to switch risers, checked all GPU, everything is fine with hardware...


    how i can solve this?



    anyone? @claymore?

    i added -nofee and it works but it's unfair to claymore... any solution to this?

    -nofee is the only solution. I think your card does not have enough memory.

  • Swimcito
    Newbie
    *
    Offline Offline

    Activity: 1
    Merit: 0


    View Profile
    June 22, 2017, 07:10:04 AM
     #12278
    When it went from epoch 129 to 130, my Hashrate went from 17.4 MH/z to 11 MH/z...

    My GPU is a GTX 970 TURBO 4 GB, i have another one but it is not currently mining, and i know i can OC and do some tunning, however, before epoch 130 i was getting 17.4, now around 11


    Is this supposed to be happening ?, i think the drop is quite big .... This is so frustrating


    Quote
    ETH: 06/19/17-17:00:22 - New job from eth-us.dwarfpool.com:8008
    17:00:22:460   1ca4   target: 0x0000000225c17d04 (diff: 2000MH), epoch #129
    17:00:22:781   1ca4   ETH - Total Speed: 17.502 Mh/s, Total Shares: 463, Rejected: 0, Time: 16:51
    17:00:22:785   1ca4   ETH: GPU0 17.502 Mh/s
    17:00:23:801   1ca4   got 244 bytes
    17:00:23:804   1ca4   buf: {"result":["0x723eb3191b184695e43aa21b471afbdc5dfb41880fa5fca39f5bbbd90dbc0dae","0x129656acf5804305816f3dc0b32b47077c8cf4b8724f181efc529a93e4c1385b","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":0}


    17:00:23:806   1ca4   parse packet: 242
    17:00:23:809   1ca4   ETH: job changed
    17:00:23:812   1ca4   new buf size: 0
    17:00:23:814   1ca4   ETH: 06/19/17-17:00:23 - New job from eth-us.dwarfpool.com:8008
    17:00:23:818   1ca4   target: 0x0000000225c17d04 (diff: 2000MH), epoch #130
    17:00:23:820   1ca4   ETH - Total Speed: 17.447 Mh/s, Total Shares: 463, Rejected: 0, Time: 16:51
    17:00:23:823   1ca4   ETH: GPU0 17.447 Mh/s
    17:00:23:968   1dd0   Setting DAG epoch #130...
    17:00:26:013   1dd0   Setting DAG epoch #130 for GPU0
    17:00:29:731   1ca4   ETH: checking pool connection...
    17:00:29:734   1ca4   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

    17:00:29:859   1ca4   got 244 bytes
    17:00:29:862   1ca4   buf: {"result":["0x723eb3191b184695e43aa21b471afbdc5dfb41880fa5fca39f5bbbd90dbc0dae","0x129656acf5804305816f3dc0b32b47077c8cf4b8724f181efc529a93e4c1385b","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


    17:00:29:865   1ca4   parse packet: 242
    17:00:29:869   1ca4   ETH: job is the same
    17:00:29:872   1ca4   new buf size: 0
    17:00:35:063   1a44   GPU0 t=68C fan=100%
    17:00:35:282   1a44   em hbt: 0, fm hbt: 79,
    17:00:35:286   1dd0   GPU0 DAG creation time - 9230 ms
    17:00:35:286   1a44   watchdog - thread 0 (gpu0), hb time 11422
    17:00:35:292   1a44   watchdog - thread 1 (gpu0), hb time 11313
    17:00:35:293   1dd0   Setting DAG epoch #130 for GPU0 done
    17:00:39:748   1ca4   ETH: checking pool connection...
    17:00:39:751   1ca4   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

    17:00:39:867   1ca4   got 244 bytes
    17:00:39:870   1ca4   buf: {"result":["0x723eb3191b184695e43aa21b471afbdc5dfb41880fa5fca39f5bbbd90dbc0dae","0x129656acf5804305816f3dc0b32b47077c8cf4b8724f181efc529a93e4c1385b","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":3}


    17:00:39:873   1ca4   parse packet: 242
    17:00:39:877   1ca4   ETH: job is the same
    17:00:39:880   1ca4   new buf size: 0
    17:00:46:122   1ca4   send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0xb497da", "0x00000000000000000000000000000000000000000000000000000000b6aefe8c"]}

    17:00:46:273   1ca4   got 40 bytes
    17:00:46:276   1ca4   buf: {"id":6,"jsonrpc":"2.0","result":true}


    17:00:46:279   1ca4   parse packet: 38
    17:00:46:281   1ca4   new buf size: 0
    17:00:49:661   1ca4   got 244 bytes
    17:00:49:664   1ca4   buf: {"result":["0xfcd1d7a1ad205cfa0f2e4db1089768f1fbc99b5939bcb17aaad2877fa6996031","0x129656acf5804305816f3dc0b32b47077c8cf4b8724f181efc529a93e4c1385b","0x0000000225c17d04dad2965cc5a02a23e254c0c3f75d9178046aeb27ce1ca574"],"jsonrpc":"2.0","id":0}


    17:00:49:667   1ca4   parse packet: 242
    17:00:49:670   1ca4   ETH: job changed
    17:00:49:673   1ca4   new buf size: 0
    17:00:49:677   1ca4   ETH: 06/19/17-17:00:49 - New job from eth-us.dwarfpool.com:8008
    17:00:49:680   1ca4   target: 0x0000000225c17d04 (diff: 2000MH), epoch #130
    17:00:49:882   1ca4   ETH - Total Speed: 11.702 Mh/s, Total Shares: 463, Rejected: 0, Time: 16:51
    17:00:49:886   1ca4   ETH: GPU0 11.702 Mh/s

  • temo
    Newbie
    *
    Offline Offline

    Activity: 1
    Merit: 0


    View Profile
    June 22, 2017, 07:14:14 AM
     #12279
    Hi guys.
    i have 4gb gtx 960.
    and i am getting only 2mh/s per card on this miner.
    system: windows 10, pool: ethermine.org./
    i heard many of 1060 owners,that they have same problem.
    any solution???

    on zcash i am getting 150 sols per card.

  • Qazo
    Full Member
    ***
    Offline Offline

    Activity: 211
    Merit: 101



    View Profile
    June 22, 2017, 07:42:38 AM
     #12280
    Quote from: Haidong Liang on June 22, 2017, 06:59:04 AM
    Quote from: Qazo on June 22, 2017, 06:30:02 AM
    anyone? @claymore?

    i added -nofee and it works but it's unfair to claymore... any solution to this?

    -nofee is the only solution. I think your card does not have enough memory.

    lol imposibru bro
    rx480 8gb nitro+ with bios mod only straps 1750->2000


    any other solution? Smiley
    Pages: « 1 ... 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 [614] 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 ... 1410 »
      Print  
Page 613
Viewing Page: 614

IRLBTC™ © 2025 IRLBTC.com