<<  >> (p.854)
    Author Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)  (Read 6591484 times)

    • carlo_0000
    Legendary
    *
    Offline Offline

    Activity: 1281
    Merit: 1003


    View Profile
    October 25, 2017, 03:03:44 AM
     #17061
    but the driver is slower than blockchain driver?

    because i put in on a computer 1x rx570 when blockchain driver won't run, no idea why, driver install correctly but miner close at start, looks like something is missing
    i tried manually install driver, and a cleanup driver but something wrong
    i have the same problem on my computer with an r9390 blockchain driver won't work


    i put 17.10.2 but it s very slow 22.8mh only dual mining, lost 1mh compared to previous driver i had

  • Marvell2
    Full Member
    ***
    Offline Offline

    Activity: 1148
    Merit: 132


    View Profile
    October 25, 2017, 03:27:26 AM
    Last edit: October 25, 2017, 04:59:59 AM by Marvell2
     #17062
    Quote from: carlo_0000 on October 25, 2017, 03:03:44 AM
    but the driver is slower than blockchain driver?

    because i put in on a computer 1x rx570 when blockchain driver won't run, no idea why, driver install correctly but miner close at start, looks like something is missing
    i tried manually install driver, and a cleanup driver but something wrong
    i have the same problem on my computer with an r9390 blockchain driver won't work


    i put 17.10.2 but it s very slow 22.8mh only dual mining, lost 1mh compared to previous driver i had



    i heard there is a setting on the new drivers under global where you have
    to flip a toggle for compute workloads so that is probbaly why you are seinf a low hash rate

    yup just tried it and one hour in the new drivers are good for now at least, only issue is u have to pick compute workloads for each and every card

    , one plus note is i can now change the voltage settings now using wattman , when it would not work in AB wierd

  • stannicek
    Newbie
    *
    Offline Offline

    Activity: 14
    Merit: 0


    View Profile
    October 25, 2017, 05:21:37 AM
     #17063
    I tried to switch to old version miner v9.8 and it is stable when network problem happened, so it is related only to v10.0 miner and AMD blockchain drivers. I didn't tried other non-blockchain AMD drivers.

    @Claymore
    Can you please clarify, what is being done with cards, when restoring work after network outage?


    Quote from: stannicek on October 20, 2017, 12:40:52 PM
    Quote from: jimmykl on October 20, 2017, 08:12:08 AM
    Quote from: stannicek on October 20, 2017, 07:23:16 AM
    Hello,

    does someone facing hard reboot (without any info .. just like on/off on PSU) with Claymore v10.0 on windows when mining (in dual mode) and connection to both pools get lost? Shocked

    Regards

    Could be too much draw on the PSU? Really need to provide more detail on your setup though.

    It's not PSU i guess. It is 100% reproducible just by pulling out ethernet cable from lan socket. It crashes immediately during restore of the work(when reconnected to pool). Rigs are running days without crash, but when cable pulled off or some problem happened on network, it goes to hard reboot.

  • Vann
    Hero Member
    *****
    Offline Offline

    Activity: 1036
    Merit: 606



    View Profile
    October 25, 2017, 05:28:00 AM
     #17064
    Quote from: carlo_0000 on October 25, 2017, 03:03:44 AM
    but the driver is slower than blockchain driver?

    because i put in on a computer 1x rx570 when blockchain driver won't run, no idea why, driver install correctly but miner close at start, looks like something is missing
    i tried manually install driver, and a cleanup driver but something wrong
    i have the same problem on my computer with an r9390 blockchain driver won't work


    i put 17.10.2 but it s very slow 22.8mh only dual mining, lost 1mh compared to previous driver i had



    No Dag fix in the 17.10.2 driver. So unless you're mining an ETH clone like UBQ or EXP, stick with the blockchain driver on v1703. Hopefully AMD will update the blockchain drivers for the Creators update.

  • manatnatt
    Newbie
    *
    Offline Offline

    Activity: 1
    Merit: 0


    View Profile
    October 25, 2017, 05:51:32 AM
     #17065
    Hi guys,

    I'm totally new to this, I was able to get 26.xxx MH/s on modded Bios and OC for MSI RX580 8GB Gaming X on ETH only.

    Now I want to do dual mode but once I ran the script, it hangs.

    My code is below:

    Quote
    setx GPU_FORCE_64BIT_PTR 0
    setx GPU_MAX_HEAP_SIZE 100
    setx GPU_USE_SYNC_OBJECTS 1
    setx GPU_MAX_ALLOC_PERCENT 100
    setx GPU_SINGLE_ALLOC_PERCENT 100
    EthDcrMiner64.exe -epool us1.ethermine.org:14444 -ewal 0x739b8012f896721EC6b9b9E23C389d48ea628CCC.Riku4515 -epsw x -dpool stratum+tcp://lbry.suprnova.cc:6256 -dwal username.workername -dpsw password

    The CMD just hangs and froze.

    Any suggestion?

    Thanks.

  • smparo
    Newbie
    *
    Offline Offline

    Activity: 27
    Merit: 0


    View Profile
    October 25, 2017, 05:54:35 AM
     #17066
    Quote from: Vann on October 25, 2017, 05:28:00 AM
    Quote from: carlo_0000 on October 25, 2017, 03:03:44 AM
    but the driver is slower than blockchain driver?

    because i put in on a computer 1x rx570 when blockchain driver won't run, no idea why, driver install correctly but miner close at start, looks like something is missing
    i tried manually install driver, and a cleanup driver but something wrong
    i have the same problem on my computer with an r9390 blockchain driver won't work


    i put 17.10.2 but it s very slow 22.8mh only dual mining, lost 1mh compared to previous driver i had



    No Dag fix in the 17.10.2 driver. So unless you're mining an ETH clone like UBQ or EXP, stick with the blockchain driver on v1703. Hopefully AMD will update the blockchain drivers for the Creators update.

    You need to change "GPU Workload" on AMD Settings: go to Gaming -> Global Settings and then for each card (you have a Global Graphics for each one) you need to change GPU Workload to "Compute" (before of that operation disable AMD Crossfire). For me work: 31Mh/s before, and 31Mh/s after... I used DDU before install new driver

  • Vann
    Hero Member
    *****
    Offline Offline

    Activity: 1036
    Merit: 606



    View Profile
    October 25, 2017, 06:06:58 AM
     #17067
    Quote from: smparo on October 25, 2017, 05:54:35 AM
    Quote from: Vann on October 25, 2017, 05:28:00 AM
    Quote from: carlo_0000 on October 25, 2017, 03:03:44 AM
    but the driver is slower than blockchain driver?

    because i put in on a computer 1x rx570 when blockchain driver won't run, no idea why, driver install correctly but miner close at start, looks like something is missing
    i tried manually install driver, and a cleanup driver but something wrong
    i have the same problem on my computer with an r9390 blockchain driver won't work


    i put 17.10.2 but it s very slow 22.8mh only dual mining, lost 1mh compared to previous driver i had



    No Dag fix in the 17.10.2 driver. So unless you're mining an ETH clone like UBQ or EXP, stick with the blockchain driver on v1703. Hopefully AMD will update the blockchain drivers for the Creators update.

    You need to change "GPU Workload" on AMD Settings: go to Gaming -> Global Settings and then for each card (you have a Global Graphics for each one) you need to change GPU Workload to "Compute" (before of that operation disable AMD Crossfire). For me work: 31Mh/s before, and 31Mh/s after... I used DDU before install new driver


    BBT did a clean install of the v17.10.2 driver using DDU on the 21 card Asus B250 livestream tonight and he only got 28.5 on RX 570's MH/s with UBQ. When he switched to ETH the hashrate droped to 25.5 MH/s on the AMD cards. I didn't see him try the Compute switch though.

    https://youtu.be/miUoqnUqk9M?t=3285

  • Victorio
    Full Member
    ***
    Offline Offline

    Activity: 281
    Merit: 100



    View Profile
    October 25, 2017, 07:39:46 AM
     #17068
    Quote from: carlo_0000 on October 25, 2017, 03:03:44 AM
    because i put in on a computer 1x rx570 when blockchain driver won't run, no idea why, driver install correctly but miner close at start, looks like something is missing
    AMD Blockchain Workloads driver does not work on Windows 7, it crashes the miner immediately.
    Only Windows 10 for AMD Blockchain Workloads driver.

  • smparo
    Newbie
    *
    Offline Offline

    Activity: 27
    Merit: 0


    View Profile
    October 25, 2017, 08:58:53 AM
     #17069
    Quote from: Vann on October 25, 2017, 06:06:58 AM
    Quote from: smparo on October 25, 2017, 05:54:35 AM
    Quote from: Vann on October 25, 2017, 05:28:00 AM
    Quote from: carlo_0000 on October 25, 2017, 03:03:44 AM
    but the driver is slower than blockchain driver?

    because i put in on a computer 1x rx570 when blockchain driver won't run, no idea why, driver install correctly but miner close at start, looks like something is missing
    i tried manually install driver, and a cleanup driver but something wrong
    i have the same problem on my computer with an r9390 blockchain driver won't work


    i put 17.10.2 but it s very slow 22.8mh only dual mining, lost 1mh compared to previous driver i had



    No Dag fix in the 17.10.2 driver. So unless you're mining an ETH clone like UBQ or EXP, stick with the blockchain driver on v1703. Hopefully AMD will update the blockchain drivers for the Creators update.

    You need to change "GPU Workload" on AMD Settings: go to Gaming -> Global Settings and then for each card (you have a Global Graphics for each one) you need to change GPU Workload to "Compute" (before of that operation disable AMD Crossfire). For me work: 31Mh/s before, and 31Mh/s after... I used DDU before install new driver


    BBT did a clean install of the v17.10.2 driver using DDU on the 21 card Asus B250 livestream tonight and he only got 28.5 on RX 570's MH/s with UBQ. When he switched to ETH the hashrate droped to 25.5 MH/s on the AMD cards. I didn't see him try the Compute switch though.

    https://youtu.be/miUoqnUqk9M?t=3285


    I have two rx580, GPU 1150/memory 2175
    Before the upgrade i just view this video (go to  2:52 for GPU Workload):
    https://www.youtube.com/watch?v=BbCi5QLhwEU

  • faanigee
    Member
    **
    Offline Offline

    Activity: 95
    Merit: 10


    View Profile
    October 25, 2017, 10:01:22 AM
     #17070
    Quote
    His implementation does a little better than the ethminer (genoil or otherwise) ones when it comes to speed on the compute side - i.e. the computations. He also benefits from a technique I also use - somewhat poorly implemented on his side, yet likely somewhat effective - that is, executing some operations "for free" because the memory read is being done at the same time. This also increases the speed relative to the other public miners, and the side effect is (of course) the ASIC is idling less of the time... resulting in your raised power consumption. Appears to be touched up output from the AMD compiler ( well, almost certainly, seeing as it left the little love letter "@(#) OpenCL 2.0 AMD-APP (2442.12).  Driver version: 2442.12" as well as another noting it was used with the compile option "-legacy" Tongue )

    Everything goes outside of my head 😇 any way thanks for your reply..!!!

  • Ursul0
    Sr. Member
    ****
    Offline Offline

    Activity: 857
    Merit: 262


    View Profile
    October 25, 2017, 10:16:34 AM
     #17071
    well... apparently out of 8 cards (over 50*rx570 connected at the same time into almost identical environment & platforms) I have one or a neighboring pair of GPUs making issues [gpuz asic quality, nor mem errors, nor display/dummy all are no factors] the best way to stabilize it seems to keep cards at the same core(I do 1180) and preferably same voltage, lowering only the mem. Some volts may be required to add from default 875. [Maybe will switch to proper setups via overdrive tool... watttool was better I think..., still using it for some equihash workers with 16.11.4 drivers - that have no 100% fan issues Smiley]

    Looks like AMD api in blockchain drivers and claymore's use of it makes really weird tricks. changing the voltage may require couple of reboots to "sink in" for instance.

  • deadsix
    Hero Member
    *****
    Offline Offline

    Activity: 751
    Merit: 517


    Fail to plan, and you plan to fail.


    View Profile
    October 25, 2017, 02:07:30 PM
     #17072
    Quote from: manatnatt on October 25, 2017, 05:51:32 AM
    Hi guys,

    I'm totally new to this, I was able to get 26.xxx MH/s on modded Bios and OC for MSI RX580 8GB Gaming X on ETH only.

    Now I want to do dual mode but once I ran the script, it hangs.

    My code is below:

    Quote
    setx GPU_FORCE_64BIT_PTR 0
    setx GPU_MAX_HEAP_SIZE 100
    setx GPU_USE_SYNC_OBJECTS 1
    setx GPU_MAX_ALLOC_PERCENT 100
    setx GPU_SINGLE_ALLOC_PERCENT 100
    EthDcrMiner64.exe -epool us1.ethermine.org:14444 -ewal 0x739b8012f896721EC6b9b9E23C389d48ea628CCC.Riku4515 -epsw x -dpool stratum+tcp://lbry.suprnova.cc:6256 -dwal username.workername -dpsw password
    The CMD just hangs and froze.

    Any suggestion?

    Thanks.

    Maybe add in your LBRY Wallet address?
    Ethereum/Zcash/Monero Mining Bangalore https://bt.irlbtc.com/view/1703592

  • blackhwk77
    Newbie
    *
    Offline Offline

    Activity: 27
    Merit: 0


    View Profile
    October 25, 2017, 03:16:31 PM
     #17073
    12 GPU in one rig ?

    Quote from: TunerDude007 on October 25, 2017, 02:32:40 AM
    Quote from: SummersideGuy on October 24, 2017, 12:28:26 PM
    Quote from: nqmauser on October 24, 2017, 11:23:57 AM
    v.10 sets correct clocks and voltage for wattman with the last two non-blockchain (drivers 2017.10.20 and the one from september), but then it throttles down upon full startup to 40% less GPU clock while keeping specified voltage values. Then upon exit, I can see in wattman the system maintains the correct OC values specified upon miner startup that the miner itself did not use.

    All test were done by using all four specs for GPU and mem clocks+voltages due to mixed results in OCing without increased voltages being specified as noted in thread.

    I have had no success in running stable the blockchain driver with and without any OC. The miner does start, I do see a north of ETH 5Mhs increases, but then it freezes my system. I've had very low li/lidag/ethi/dcri values with that driver and still the system keeps on crashing. Vega64 under windows obviously.

    Thanks for all the great work, miner looks sweet!
    I am using the Robin Hood drivers + Claymore 10 + Windows 7 on a mix GPU RIG - Rig consists of 4 cards
    MSI ARMOR RX 570 4GB     cclock 1175 mclock 2100 cvddc 900 mvddc 900   30.1Eth 67.0LBR         Dcri 20
    GiG Aurora  RX 580 4GB     cclock 1275 mclock 2050 cvddc 950 mvddc 900   29.9Eth 67.5LBR         Dcri 20
    Asus Rog     RX 560 4GB    cclock 1175 mclock 1950 cvddc 850 mvddc 900    13.7Eth 34.0LBR         Dcri 20
    MSI         GTX 1060 3GB    OC'd in MSI AB   PM 70   Core +125 Mem+ 900    23.5Eth 21.0LBR         Dcri 28

    I switched this rig over to the Robinhood drivers from basic drivers 3 weeks ago as I wanted to switch  back to Ethereum from Music coin for a while. Since the switch 3 weeks ago I had to restart once due to the GTX 1060 freezing the system after a few days with mem set to +950.
    At the wall on the meter the system is pulling a total of 595 watts dual mining.

    Note: When I start up claymore for the first time, I wait till I see the first set of hash rates then I close claymore and rerun Claymore to get the proper hashrates. The very first instance of Claymore both my 570 and 580 will report 19mh Eth but closing and reopening Claymore corrects this. 
    Sorry guys I can't read the whole thread but I hope you are all aware of amd new drivers... 12+ Gpu's much more stable now

    http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-17.10.2-Release-Notes.aspx

  • perazdera
    Newbie
    *
    Offline Offline

    Activity: 40
    Merit: 0


    View Profile
    October 25, 2017, 03:20:06 PM
     #17074
    I have a problem with sapphire rx 480 4gb on windows 10 pro. When I install AMD Blockchain Workloads driver my computer does not recognize cards. Actually only driver that I found that recognize cards is "Non-WHQL-Win10-64Bit-Radeon-Software-Crimson-16.9.2-Sep21"

    Does anyone have any clue what the problem might be?

  • blackhwk77
    Newbie
    *
    Offline Offline

    Activity: 27
    Merit: 0


    View Profile
    October 25, 2017, 03:27:32 PM
     #17075
    Tempted to try the new drivers but it is a serious pain in the ass to update drivers with modded 570s.

  • crypper
    Member
    **
    Offline Offline

    Activity: 239
    Merit: 12


    View Profile
    October 25, 2017, 03:31:23 PM
     #17076
    Quote from: deadsix on October 25, 2017, 02:07:30 PM
    Quote from: manatnatt on October 25, 2017, 05:51:32 AM
    Hi guys,

    I'm totally new to this, I was able to get 26.xxx MH/s on modded Bios and OC for MSI RX580 8GB Gaming X on ETH only.

    Now I want to do dual mode but once I ran the script, it hangs.

    My code is below:

    Quote
    setx GPU_FORCE_64BIT_PTR 0
    setx GPU_MAX_HEAP_SIZE 100
    setx GPU_USE_SYNC_OBJECTS 1
    setx GPU_MAX_ALLOC_PERCENT 100
    setx GPU_SINGLE_ALLOC_PERCENT 100
    EthDcrMiner64.exe -epool us1.ethermine.org:14444 -ewal 0x739b8012f896721EC6b9b9E23C389d48ea628CCC.Riku4515 -epsw x -dpool stratum+tcp://lbry.suprnova.cc:6256 -dwal username.workername -dpsw password
    The CMD just hangs and froze.

    Any suggestion?

    Thanks.

    Maybe add in your LBRY Wallet address?

    Add "-dcoin lbc" to your code. You are currently trying to mine decred on lbry pool (default -dcoin argument is dcr).

  • Momonga001
    Newbie
    *
    Offline Offline

    Activity: 9
    Merit: 0


    View Profile
    October 25, 2017, 05:13:56 PM
     #17077
    o mai ga, the GPU is the best in the market

  • kkourmousis
    Member
    **
    Offline Offline

    Activity: 119
    Merit: 10


    View Profile
    October 25, 2017, 05:47:43 PM
     #17078
    I will be more than happy to give the new drivers a try, but first I will wait for mr. Claymore to tell us if v.10 is fully compatible or we should wait for a new version
    Buy me a souvlaki:
    ETH: 0x22D1C05F89dbe036aABFFEc197949E635903C6FA
    BTC: 1FHwEyiCqUTpauGfvPg5czMYoWMKqYGBWx

  • wOvAN
    Jr. Member
    *
    Offline Offline

    Activity: 41
    Merit: 3


    View Profile
    October 25, 2017, 06:17:32 PM
     #17079
    On Windows 7  there's no option "GPU Workload"  in 17.10.2,  Sad

  • wOvAN
    Jr. Member
    *
    Offline Offline

    Activity: 41
    Merit: 3


    View Profile
    October 25, 2017, 07:33:13 PM
     #17080
    Robin Hood drivers still best choice for win7
    Pages: « 1 ... 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 [854] 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 ... 1409 »
      Print  
Page 853
Viewing Page: 854

IRLBTC™ © 2025 IRLBTC.com