<<  >> (p.869)
    Author Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)  (Read 6591474 times)

    • VicePrez
    Newbie
    *
    Offline Offline

    Activity: 7
    Merit: 0


    View Profile
    November 06, 2017, 07:11:21 PM
     #17361
    Anyone having difficulty setting Compute mode for all their cards under the new drivers (17.11.1) on Windows 10 FCU?

    After AMD Settings restarts, Compute mode switches back to Graphics. FML.

  • greatauror28
    Full Member
    ***
    Offline Offline

    Activity: 181
    Merit: 101

    Ethereum Miner


    View Profile
    November 06, 2017, 07:15:58 PM
     #17362
    Quote from: syraka76 on November 06, 2017, 04:37:50 PM
    Quote from: Aegean Skipper on November 06, 2017, 04:32:25 PM

    Hi

    Suddenly, in a very steady rig that i have with 6x RX480 8GB and SSD drive and windows 10 64bit/ 16000 virtual memory
    i am having the error below

    Code:
    Your computer is low on memory. Save your files and close these programs:
    EthDcrMiner64

    I have changes several versions of claymore, from 8.1 to the latest 10.1

    Any suggestions please?


    increases virtual memory, brings it to 36000 or 42000

    This is too much  Grin

    Set it to 20GB and you're set.

    My rig that runs with 8 cards has 20GB set in the page file and it runs mighty fine.
    Virtual memory used is around 92% while physical memory used is around 60% (4gb ram).

    Quote from: VicePrez on November 06, 2017, 07:11:21 PM
    Anyone having difficulty setting Compute mode for all their cards under the new drivers (17.11.1) on Windows 10 FCU?

    After AMD Settings restarts, Compute mode switches back to Graphics. FML.

    What's wrong with 17.10.3 driver? This is what i'm using with the win10 FCU and it's running okay. Compute settings sticks with all 8 cards.
    I build and sell rigs! I also sell ssd clones of the most stable Windows+Claymore+AMD driver combo you'd ever used.

  • VicePrez
    Newbie
    *
    Offline Offline

    Activity: 7
    Merit: 0


    View Profile
    November 06, 2017, 07:22:26 PM
     #17363
    Quote from: VicePrez on November 06, 2017, 07:11:21 PM
    Anyone having difficulty setting Compute mode for all their cards under the new drivers (17.11.1) on Windows 10 FCU?

    After AMD Settings restarts, Compute mode switches back to Graphics. FML.

    Pfft, will answer my own question.

    The UI was screwed up. I set Compute mode for all cards (restarted AMD settings each time), then did a system restart and opened AMD Settings; Compute mode was set for all cards.

  • Sam123
    Hero Member
    *****
    Offline Offline

    Activity: 980
    Merit: 502


    View Profile
    November 06, 2017, 07:26:28 PM
     #17364
    What speed are you getting using RX580 8G

  • freskhu
    Newbie
    *
    Offline Offline

    Activity: 62
    Merit: 0


    View Profile
    November 06, 2017, 07:33:07 PM
     #17365
    Hello,
    What does this red line mean on the monitoring?

    http://prntscr.com/h70xeq

  • Ofardo
    Newbie
    *
    Offline Offline

    Activity: 9
    Merit: 0


    View Profile
    November 06, 2017, 08:20:28 PM
     #17366

    Hi, Anyone knows best option for (-allcoins) to mine PIRL?

  • kkourmousis
    Member
    **
    Offline Offline

    Activity: 119
    Merit: 10


    View Profile
    November 06, 2017, 10:58:20 PM
     #17367
    Quote from: Sam123 on November 06, 2017, 07:26:28 PM
    What speed are you getting using RX580 8G

    I can answer that for my case.

    I am getting an average of ~29.2MH/s ETH & 7000MH/s DCR, per RX 580 8GB Nitro+, consuming a little bit less than 160w per gpu

    Windows 10 Pro
    Radeon™ Software Crimson ReLive Edition 17.11.1
    Claymore Dual Miner v.10.1
    Modded BIOS

    my config:

    -esm 0
    -asm 1
    -etha 0
    -estale 0
    -mode 0
    -dcri 30
    -retrydelay 2
    -tt 70
    -tstop 80
    -fanmax 85
    -fanmin 15
    -cclock 1140
    -mclock 2070 (average across all my gpus)
    -cvddc 850
    -mvddc 850
    -platform 1
    Buy me a souvlaki:
    ETH: 0x22D1C05F89dbe036aABFFEc197949E635903C6FA
    BTC: 1FHwEyiCqUTpauGfvPg5czMYoWMKqYGBWx

  • greatauror28
    Full Member
    ***
    Offline Offline

    Activity: 181
    Merit: 101

    Ethereum Miner


    View Profile
    November 07, 2017, 02:20:08 AM
     #17368
    Quote from: kkourmousis on November 06, 2017, 10:58:20 PM
    Quote from: Sam123 on November 06, 2017, 07:26:28 PM
    What speed are you getting using RX580 8G

    I can answer that for my case.

    I am getting an average of ~29.2MH/s ETH & 7000MH/s DCR, per RX 580 8GB Nitro+, consuming a little bit less than 160w per gpu

    Windows 10 Pro
    Radeon™ Software Crimson ReLive Edition 17.11.1
    Claymore Dual Miner v.10.1
    Modded BIOS

    my config:

    -esm 0
    -asm 1
    -etha 0
    -estale 0
    -mode 0
    -dcri 30
    -retrydelay 2
    -tt 70
    -tstop 80
    -fanmax 85
    -fanmin 15
    -cclock 1140
    -mclock 2070 (average across all my gpus)
    -cvddc 850
    -mvddc 850
    -platform 1

    Mine ranges from 30.0 to 30.3 eth and 750-760 dcr @145-150w across all 8 cards.
    1160/2025/875 with dcri25.
    I build and sell rigs! I also sell ssd clones of the most stable Windows+Claymore+AMD driver combo you'd ever used.

  • SERHYG
    Newbie
    *
    Offline Offline

    Activity: 2
    Merit: 0


    View Profile
    November 07, 2017, 04:58:11 AM
     #17369
    hey guys
    How are you!

    I'm trying to use this software to mine dual ethereum and another alcoin, the problem is that the pool never recognizes my mining company.
    It never shows statistics of my work, it's as if it did not exist.
    but I'm mining at 20mh s average.

    I'm using the latest amd 17.40 drivers and the ubuntu server.
    it will be the amd drivers that cause the problem?



    Thanks for the help

  • nars28
    Newbie
    *
    Offline Offline

    Activity: 25
    Merit: 0


    View Profile
    November 07, 2017, 07:25:25 AM
     #17370
    Safest settings for me with striped timings are (HIS RX470 Hynix and Elpida):
    - 1050 mhz core @ 0.9mv
    - 1850 mhz mem @ 0.9mv
    - 26.5 mh/s - single mining eth

  • mzeoatrakeb
    Newbie
    *
    Offline Offline

    Activity: 25
    Merit: 0


    View Profile
    November 07, 2017, 07:30:34 AM
     #17371
    Hi Guys can I mining dual on Nicehash? like Cryptonight + Decred?
    on Clymore or on software?

  • kkourmousis
    Member
    **
    Offline Offline

    Activity: 119
    Merit: 10


    View Profile
    November 07, 2017, 09:32:27 AM
     #17372
    Quote from: greatauror28 on November 07, 2017, 02:20:08 AM
    Mine ranges from 30.0 to 30.3 eth and 750-760 dcr @145-150w across all 8 cards.
    1160/2025/875 with dcri25.

    Electricity costs much for me so I prefer the lowest possible consumption.

    I can get to the numbers (performance wise) that you posted but not with 145-150w. How did you measure that?

    I use the following method for measuring gpu power draw:

    • Remove all gpus and risers from the rig. I mean unplug them completely
    • Measure idle consumption of the rig.
    • Reconnect all gpus and risers
    • Measure mining consumption of the rig.
    • Perform a  mining - idle consumption and divide by the number of the gpus

    Keep in mind that if you have your GPUs or risers plugged in (even without having them mining) they do consume power.
    Also, I only measure power consumption using a wall meter.

    Did you use that methodology for your measurements @greatauror28 ? What brand of RX 580 do you have?
    Buy me a souvlaki:
    ETH: 0x22D1C05F89dbe036aABFFEc197949E635903C6FA
    BTC: 1FHwEyiCqUTpauGfvPg5czMYoWMKqYGBWx

  • mzeoatrakeb
    Newbie
    *
    Offline Offline

    Activity: 25
    Merit: 0


    View Profile
    November 07, 2017, 09:36:22 AM
     #17373
    Quote from: kkourmousis on November 06, 2017, 10:58:20 PM
    Quote from: Sam123 on November 06, 2017, 07:26:28 PM
    What speed are you getting using RX580 8G

    I can answer that for my case.

    I am getting an average of ~29.2MH/s ETH & 7000MH/s DCR, per RX 580 8GB Nitro+, consuming a little bit less than 160w per gpu

    Windows 10 Pro
    Radeon™ Software Crimson ReLive Edition 17.11.1
    Claymore Dual Miner v.10.1
    Modded BIOS

    my config:

    -esm 0
    -asm 1
    -etha 0
    -estale 0
    -mode 0
    -dcri 30
    -retrydelay 2
    -tt 70
    -tstop 80
    -fanmax 85
    -fanmin 15
    -cclock 1140
    -mclock 2070 (average across all my gpus)
    -cvddc 850
    -mvddc 850
    -platform 1

    I have mod bios ...30.3MH/s  and 110-120w per card
    Dual mode 51C single mode 42.

  • aliitp
    Jr. Member
    *
    Offline Offline

    Activity: 91
    Merit: 1


    View Profile
    November 07, 2017, 11:15:30 AM
     #17374
    guys i really need help with this, last night i downloaded claymore's (and other eth mining GUI app) the thing is as soon as i start mining ETH my entire PC becomes sluggish to the point you can't control ANYTHING there, the mouse is almost frozen, ctrl+alt+delete is responding after 5+ minutes, everything is almost to the point of being frozen, i was forced to click the shutdown button on my chassis and wait 3+ minutes for the machines to suspend all processes and eventually shutdown the PC !...

    Not sure what was wrong but am sure the CPU was Not utilized at all so why did this happen ?!?...

    My PC is pretty much highest end, with 5820k 6 Core 12 Threads, and 3x GTX 970's on SLI !!...

    i was monitoring the program and it was reporting 0 hash/sec so it wasn't working either, is this because am having nvidia cards and why is this terrible slowness happening and can we avoid it and be able to mine properly with 3x GTX 970s ?

    Help appreciated...

  • dzobnin
    Newbie
    *
    Offline Offline

    Activity: 1
    Merit: 0


    View Profile
    November 07, 2017, 01:09:14 PM
    Last edit: November 07, 2017, 03:07:42 PM by dzobnin
     #17375
    Hello everyone, apologies if this already came up before. I hope you can point me in the right direction. I get the following error:

    watchdog - eminer thread hangs
    Miner thread hangs, need to restart miner!

    no issues are being reported in log files with any GPUs. Sometimes it happens after connection to the pool has been lost. Sometimes after dev fee mining when it tries to re-connect.

    example from log file:

    ETH: Stratum - Cannot connect to eu1.ethermine.org:4444
    ETH: Stratum - Failed to connect, retry in 20 sec...
    watchdog - eminer thread hangs
    Miner thread hangs, need to restart miner!

    Rig setup:
    Ubuntu 16.04.3 LTS (GNU/Linux 4.11.0-kfd-compute-rocm-rel-1.6-180 x86_64)
    claymore 10
    13 x Sapphire RX 570 Nitro + 4gb Elpida
    plenty of RAM and swap
    I am on WIFI with USB dongle.

                  total        used        free      shared  buff/cache   available
    Mem:        3735572      619720     2799392       12704      316460     2909084
    Swap:      48090108           0    48090108


    Any pointers welcome.

  • mewhoyou
    Sr. Member
    ****
    Offline Offline

    Activity: 352
    Merit: 250


    View Profile
    November 07, 2017, 01:32:08 PM
     #17376
    Guys,

    When i set this ... only my first GC applies to it.... other GC are still standard setting... anything I am doing wrong?


    -esm 0
    -asm 1
    -etha 0
    -estale 0
    -mode 1
    -dcri 30
    -retrydelay 2
    -tt 70
    -tstop 80
    -fanmax 85
    -fanmin 15
    -cclock 1050
    -mclock 1850
    -cvddc 900
    -mvddc 900
    -platform 1
    Ethereum the Next Big Thing?

  • Rickirs
    Member
    **
    Offline Offline

    Activity: 206
    Merit: 20


    View Profile
    November 07, 2017, 02:00:30 PM
     #17377
    Quote from: aliitp on November 07, 2017, 11:15:30 AM
    guys i really need help with this, last night i downloaded claymore's (and other eth mining GUI app) the thing is as soon as i start mining ETH my entire PC becomes sluggish to the point you can't control ANYTHING there, the mouse is almost frozen, ctrl+alt+delete is responding after 5+ minutes, everything is almost to the point of being frozen, i was forced to click the shutdown button on my chassis and wait 3+ minutes for the machines to suspend all processes and eventually shutdown the PC !...

    Not sure what was wrong but am sure the CPU was Not utilized at all so why did this happen ?!?...

    My PC is pretty much highest end, with 5820k 6 Core 12 Threads, and 3x GTX 970's on SLI !!...

    i was monitoring the program and it was reporting 0 hash/sec so it wasn't working either, is this because am having nvidia cards and why is this terrible slowness happening and can we avoid it and be able to mine properly with 3x GTX 970s ?

    Help appreciated...

    Thats nothing unusual , when GPU is 100% in use, it causes little sluggish response from computer( its actually display only, computer is fine). What I suggest is try with with SLI turned OFF from NVIDIA control panel and then try again.
    Also, keep eye on the temperature stats of the cards just in case.

  • woodaxe
    Member
    **
    Offline Offline

    Activity: 129
    Merit: 10


    View Profile
    November 07, 2017, 02:05:38 PM
     #17378
    Quote from: Ursul0 on November 06, 2017, 10:34:47 AM
    just some info to sum things up:
    I've got various 570s (hashing at 28.5-30MH) and vegas 64(40-41MH) running on winX anniversary with drivers: 17.10.2, 17.10.3, 17.11.1
    Using overdriven tool for proper (not the same values for various stages, as claymore does) frequencies and volts - works great!
    (actually I use it for vegas FE with 2017Q4 driver as well)

    NEVER had an issue with setting "compute mode" - just fucking ignore the AMD GUI crap

    Also for all those lazy people using AB - just DON'T. It should be the tool of last resort - only if nothing else works and immediate results are required... and can be achieved without fucking everything up.
    Seriously. I'm tired of repeating myself on this issue. Don't use AB for AMD ever.



    ok ive got it  but dont know how to use it is there a guide or something  have you got  link

    many thanks

  • Rickirs
    Member
    **
    Offline Offline

    Activity: 206
    Merit: 20


    View Profile
    November 07, 2017, 02:09:38 PM
     #17379
    Quote from: dzobnin on November 07, 2017, 01:09:14 PM

    ETH: Stratum - Cannot connect to eu1.ethermine.org:4444
    ETH: Stratum - Failed to connect, retry in 20 sec...
    watchdog - eminer thread hangs
    Miner thread hangs, need to restart miner!

    May be issue with internet or particular pool, may be adding alternate pools server to epools.txt help.  

  • blackhwk77
    Newbie
    *
    Offline Offline

    Activity: 27
    Merit: 0


    View Profile
    November 07, 2017, 03:31:33 PM
     #17380
    Try specifying it for each card like -cclock 1050,1050,1050,etc for all settings.

    Quote from: mewhoyou on November 07, 2017, 01:32:08 PM
    Guys,

    When i set this ... only my first GC applies to it.... other GC are still standard setting... anything I am doing wrong?


    -esm 0
    -asm 1
    -etha 0
    -estale 0
    -mode 1
    -dcri 30
    -retrydelay 2
    -tt 70
    -tstop 80
    -fanmax 85
    -fanmin 15
    -cclock 1050
    -mclock 1850
    -cvddc 900
    -mvddc 900
    -platform 1
    Pages: « 1 ... 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 [869] 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 ... 1409 »
      Print  
Page 868
Viewing Page: 869

IRLBTC™ © 2025 IRLBTC.com