<<  >> (p.898)
    Author Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)  (Read 6591476 times)

    • coinzoid
    Sr. Member
    ****
    Offline Offline

    Activity: 476
    Merit: 250


    View Profile
    December 10, 2017, 03:20:58 PM
     #17941
    Quote from: Cryptographertm on December 10, 2017, 10:50:44 AM
    Anyone ever had this happen?

    I had left miner running for a few hours, checked the console, everything looks fine, im getting my normal hash rate, shares updating etc.

    I check my pool balance, it was the same as few hours ago. i check the dashboard, it shows 0 hashrate, yet miner is still mining, GPU doing calculations, jobs updating etc.

    I restarted miner now its back to normal.

    Then it must be something on pool end. Also check your gpu against errors using HWinfo.

  • bond007taz
    Newbie
    *
    Offline Offline

    Activity: 26
    Merit: 0


    View Profile
    December 10, 2017, 03:24:44 PM
     #17942
    i am having an issue where the memory cards are losing memory over time and then claymore will stop, which is exactly the same issue as noted in issue 82 on github "After few hours of mining the miner thread is hanging and the miner is restarting automatically but the Baffin memory starts decreasing and the miner stops with an error after a while."

    I have reinstalled ubuntu many times and went a got a new motherboard/cpu/ram with a fresh install of ubuntu - still the same issues...

    Is there a fix for this???

    https://github.com/nanopool/Claymore-Dual-Miner/issues/82
    https://github.com/nanopool/Claymore-Dual-Miner/issues/106

    ubuntu 16.04
    amd drivers 17.30 (tried 17.40 drivers too)
    1-6 GPU's - same issue no matter the number of GPU's (tried switching out all of my GPU risers with no luck)

  • hotx
    Newbie
    *
    Offline Offline

    Activity: 17
    Merit: 0


    View Profile
    December 10, 2017, 04:20:58 PM
     #17943
    Quote from: deadsix on December 10, 2017, 08:09:59 AM
    Quote from: hotx on December 09, 2017, 05:37:40 PM
    I'm sure this is posted somewhere, but how do I run two instances of claymore 10.2? One for AMD and one for NVIDIA.  I tried the -platform and -mport but its still not working.

    You do know that claymore runs amd and nvidia in a single instance perfectly fine?

    yes  and its working fine now except i'm mining ETH+SIA and my RX470 are not as efficient doing a dual mine.  i've tried the -dcri option but its not getting the hashrate i'd like. so by running two instances, I can better adjust the AMD's and keep my NVIDIA with current settings.

  • z0n0
    Legendary
    *
    Offline Offline

    Activity: 1274
    Merit: 1006



    View Profile
    December 10, 2017, 04:32:51 PM
     #17944
    Hey guys.
    I've been out of mining for some time now.
    I just turned on my old rig today and noticed huge hash difference when mining ETH or EXP.
    With ETH I'm getting just over 20 MH while with EXP I'm on 29 MH per card.
    I'm running RX480 8gb on Windows with 17.11.1 driver version.
    Is such a difference in speed normal? What am I missing?
    Thanks.

  • Vann
    Hero Member
    *****
    Offline Offline

    Activity: 1036
    Merit: 606



    View Profile
    December 10, 2017, 04:37:24 PM
     #17945
    With the Crimson Relive 17.1x.x drivers on Windows v1709 Fall Creators Update, you need to toggle the 'Compute' mode on from 'Gaming' for all the cards in Gaming section of AMD settings.

  • clems
    Member
    **
    Offline Offline

    Activity: 171
    Merit: 10


    View Profile
    December 10, 2017, 04:43:32 PM
     #17946
    Quote from: z0n0 on December 10, 2017, 04:32:51 PM
    Hey guys.
    I've been out of mining for some time now.
    I just turned on my old rig today and noticed huge hash difference when mining ETH or EXP.
    With ETH I'm getting just over 20 MH while with EXP I'm on 29 MH per card.
    I'm running RX480 8gb on Windows with 17.11.1 driver version.
    Is such a difference in speed normal? What am I missing?
    Thanks.


    Use the blockchain driver
    http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx
    Ref HiveOS https://hiveos.farm?ref=3665
    Promocode HIVEOS: IMPASSENET (10 dollars on your account)

  • z0n0
    Legendary
    *
    Offline Offline

    Activity: 1274
    Merit: 1006



    View Profile
    December 10, 2017, 04:43:45 PM
     #17947
    Quote from: Vann on December 10, 2017, 04:37:24 PM
    With the Crimson Relive 17.1x.x drivers on Windows v1709 Fall Creators Update, you need to toggle the 'Compute' mode on from 'Gaming' for all the cards in Gaming section of AMD settings.

    My rig is running on win7  Undecided

  • Vann
    Hero Member
    *****
    Offline Offline

    Activity: 1036
    Merit: 606



    View Profile
    December 10, 2017, 04:55:04 PM
     #17948
    Quote from: z0n0 on December 10, 2017, 04:43:45 PM
    Quote from: Vann on December 10, 2017, 04:37:24 PM
    With the Crimson Relive 17.1x.x drivers on Windows v1709 Fall Creators Update, you need to toggle the 'Compute' mode on from 'Gaming' for all the cards in Gaming section of AMD settings.

    My rig is running on win7  Undecided

    See if there is a compute mode toggle in the gaming section of AMD settings like I mentioned. Windows 7 also has issues with the AMD blockchain driver. You can try the Robinhood driver.

    https://bt.irlbtc.com/view/2068446.0

    Otherwise you can update to Windows 10 for free untill Dec. 31st.

    https://www.cnet.com/how-to/microsoft-windows-10-free-upgrade-offer-assistive-features/

  • z0n0
    Legendary
    *
    Offline Offline

    Activity: 1274
    Merit: 1006



    View Profile
    December 10, 2017, 05:18:55 PM
     #17949
    Quote from: Vann on December 10, 2017, 04:55:04 PM
    Quote from: z0n0 on December 10, 2017, 04:43:45 PM
    Quote from: Vann on December 10, 2017, 04:37:24 PM
    With the Crimson Relive 17.1x.x drivers on Windows v1709 Fall Creators Update, you need to toggle the 'Compute' mode on from 'Gaming' for all the cards in Gaming section of AMD settings.

    My rig is running on win7  Undecided

    See if there is a compute mode toggle in the gaming section of AMD settings like I mentioned. Windows 7 also has issues with the AMD blockchain driver. You can try the Robinhood driver.

    https://bt.irlbtc.com/view/2068446.0

    Otherwise you can update to Windows 10 for free untill Dec. 31st.

    https://www.cnet.com/how-to/microsoft-windows-10-free-upgrade-offer-assistive-features/


    Thanks for your help!

  • Bael
    Jr. Member
    *
    Offline Offline

    Activity: 87
    Merit: 2


    View Profile
    December 10, 2017, 06:21:54 PM
     #17950
    Hi

    I'm trying to mine eth+pasl

    The problem is that I lower the mining of eth to 17 mh/s when it is normal that this about 30 or 31 mhs mine eth+lbc

    I put my configuration to see if you can lend me a hand:

    GPU_FORCE_64BIT_PTR 0
    GPU_MAX_HEAP_SIZE 100
    GPU_USE_SYNC_OBJECTS 1
    GPU_MAX_ALLOC_PERCENT 100
    GPU_SINGLE_ALLOC_PERCENT 100
    EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal miwallet.miworker -epsw x -dpool mine.pasl.fairpool.xyz:4009 -dwal <YOUR_PASL_ACCOUNT>+<WORKER_NAME> -dpsw x -tstop 85 -dcoin pasc


    What will I be doing wrong?

    regards

  • entity279
    Newbie
    *
    Offline Offline

    Activity: 13
    Merit: 0


    View Profile
    December 10, 2017, 06:32:35 PM
     #17951
    Quote from: Bael on December 10, 2017, 06:21:54 PM
    Hi

    I'm trying to mine eth+pasl

    The problem is that I lower the mining of eth to 17 mh/s when it is normal that this about 30 or 31 mhs mine eth+lbc

    I put my configuration to see if you can lend me a hand:

    GPU_FORCE_64BIT_PTR 0
    GPU_MAX_HEAP_SIZE 100
    GPU_USE_SYNC_OBJECTS 1
    GPU_MAX_ALLOC_PERCENT 100
    GPU_SINGLE_ALLOC_PERCENT 100
    EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal miwallet.miworker -epsw x -dpool mine.pasl.fairpool.xyz:4009 -dwal <YOUR_PASL_ACCOUNT>+<WORKER_NAME> -dpsw x -tstop 85 -dcoin pasc


    What will I be doing wrong?

    regards

    you need to manually tune (decrease) your -dcri parameter to restore ETH value. I'd start with '-dcri 1' and keep increasing until  the eth hashrate drops too much. Also, you can increase power limit which could help both ETH and PASC climb back up

  • Bael
    Jr. Member
    *
    Offline Offline

    Activity: 87
    Merit: 2


    View Profile
    December 11, 2017, 12:28:01 AM
     #17952
    Quote from: entity279 on December 10, 2017, 06:32:35 PM
    Quote from: Bael on December 10, 2017, 06:21:54 PM
    Hi

    I'm trying to mine eth+pasl

    The problem is that I lower the mining of eth to 17 mh/s when it is normal that this about 30 or 31 mhs mine eth+lbc

    I put my configuration to see if you can lend me a hand:

    GPU_FORCE_64BIT_PTR 0
    GPU_MAX_HEAP_SIZE 100
    GPU_USE_SYNC_OBJECTS 1
    GPU_MAX_ALLOC_PERCENT 100
    GPU_SINGLE_ALLOC_PERCENT 100
    EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal miwallet.miworker -epsw x -dpool mine.pasl.fairpool.xyz:4009 -dwal <YOUR_PASL_ACCOUNT>+<WORKER_NAME> -dpsw x -tstop 85 -dcoin pasc


    What will I be doing wrong?

    regards

    you need to manually tune (decrease) your -dcri parameter to restore ETH value. I'd start with '-dcri 1' and keep increasing until  the eth hashrate drops too much. Also, you can increase power limit which could help both ETH and PASC climb back up

    You have discovered a new world, I have never used the -dcri xDD

    Thank you : )

  • ninjabull
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    December 11, 2017, 02:13:00 AM
     #17953
    Quote from: ninjabull on December 10, 2017, 10:54:17 AM
    I'm having problems getting the miner to work (cannot allocate big buffer for DAG).

    I've tried increasing page file to 17-25GB, using the env. variables and even using the benchmark 10 flag. Nothing works, while etherminer is working fine.

    I have never been able to run this miner. Any suggestions?


    Code:
    04:18:38:819 1ff0 Check and remove old log files...
    04:18:38:824 1ff0 args: -benchmark 10
    04:18:38:827 1ff0
    04:18:38:831 1ff0 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
    04:18:38:835 1ff0 º     Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.2      º
    04:18:38:838 1ff0 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
    04:18:38:842 1ff0
    04:18:39:703 1ff0 OpenCL platform: NVIDIA CUDA
    04:18:39:708 1ff0 AMD OpenCL platform not found
    04:18:40:451 1ff0 CUDA initializing...

    04:18:40:456 1ff0 NVIDIA Cards available: 1
    04:18:40:461 1ff0 CUDA Driver Version/Runtime Version: 9.1/8.0
    04:18:40:466 1ff0 GPU #0: GeForce GTX 970, 4096 MB available, 13 compute units, capability: 5.2

    04:18:40:471 1ff0 Total cards: 1
    04:18:44:108 1ff0 No AMD cards in the list, ADL library will not be used.
    04:18:44:114 1ff0 NVML version: 9.388.59
    04:18:44:230 1ff0 CUDA error 0 #102 - 46
    04:18:44:393 1ff0 CUDA error 0 #103 - 46
    04:18:44:493 1ff0 CUDA error 0 #105 - 46
    04:18:44:609 1ff0

    04:18:44:614 1ff0
    BENCHMARK MODE!

    04:18:44:632 1e70 Setting DAG epoch #10...
    04:18:45:075 970 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
    04:18:45:080 970 ETH: GPU0 0.000 Mh/s
    04:18:45:683 1e70 Setting DAG epoch #10 for GPU0
    04:18:45:688 1e70 Create GPU buffer for GPU0
    04:18:45:774 1e70 CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

    04:18:48:091 970 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
    04:18:48:091 970 ETH: GPU0 0.000 Mh/s
    04:18:48:794 1e70 Set global fail flag, failed GPU0
    04:18:48:794 1e70 GPU 0 failed
    04:18:48:794 1e74 Setting DAG epoch #10 for GPU0
    04:18:48:894 1e74 GPU 0, CUDA error 46 - cannot write buffer for DAG

    04:18:51:110 970 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
    04:18:51:122 970 ETH: GPU0 0.000 Mh/s

    Thank you.

    I left it and let it restart itself 10-12 times and then it started to work.

    I'm guessing this isn't normal?

  • Trimegistus
    Legendary
    *
    Offline Offline

    Activity: 1565
    Merit: 1027



    View Profile
    December 11, 2017, 11:12:03 AM
     #17954
    Quote from: Swiped on December 10, 2017, 02:53:59 PM
    I recently put a machine on ETC and updated the drivers to the blockchain drivers, so the machine mines faster now, but is more unstable, even when I shut off dual mining.  Can anyone share with me their run parameters for a Sapphire rx nitro (non-plus) 480 8g card?  I am running windows 10 with v 10.2 with the August 23rd blockchain drivers.  Would love a suggestion on how to get this to run stable and not have cards tripping out.  I have tried raising and lowering voltages, lowering ethi to 1, and turning off dual mode, but not really found a stable set up.  Appreciate any thoughts.
    Thanks

    I'm using this config.

    Code:
    -epool eu1.ethermine.org:4444
    -ewal xxxxx
    #-eworker
    -epsw x
    -esm 0
    -allpools 1
    -mode 1
    -estale 1
    -ethi 16
    -gser 2
    -wd 1
    -r 0
    -dbg -1
    -tt 75
    -ttdcr 80
    -ttli 85
    -tstop 90
    -cclock 900
    -cvddc 800
    -mclock 1750
    -mvddc 800
    -powlim -10

    Works like a charm on my 6x480 rig Grin

  • cjclm7
    Newbie
    *
    Offline Offline

    Activity: 25
    Merit: 0


    View Profile
    December 11, 2017, 11:38:30 AM
     #17955
    Quote from: Trimegistus on December 11, 2017, 11:12:03 AM
    Quote from: Swiped on December 10, 2017, 02:53:59 PM
    I recently put a machine on ETC and updated the drivers to the blockchain drivers, so the machine mines faster now, but is more unstable, even when I shut off dual mining.  Can anyone share with me their run parameters for a Sapphire rx nitro (non-plus) 480 8g card?  I am running windows 10 with v 10.2 with the August 23rd blockchain drivers.  Would love a suggestion on how to get this to run stable and not have cards tripping out.  I have tried raising and lowering voltages, lowering ethi to 1, and turning off dual mode, but not really found a stable set up.  Appreciate any thoughts.
    Thanks

    I'm using this config.

    Code:
    -epool eu1.ethermine.org:4444
    -ewal xxxxx
    #-eworker
    -epsw x
    -esm 0
    -allpools 1
    -mode 1
    -estale 1
    -ethi 16
    -gser 2
    -wd 1
    -r 0
    -dbg -1
    -tt 75
    -ttdcr 80
    -ttli 85
    -tstop 90
    -cclock 900
    -cvddc 800
    -mclock 1750
    -mvddc 800
    -powlim -10

    Works like a charm on my 6x480 rig Grin

    If you are on Linux OS, may I suggest you do a simple test: stop miner, edit config.txt by adding comment (add #) on those 2 lines (# -cclock 900 and # -mclock 1750). Then restart the miner. Did you see any difference in the GPU´s hashrate?

  • Trimegistus
    Legendary
    *
    Offline Offline

    Activity: 1565
    Merit: 1027



    View Profile
    December 11, 2017, 01:36:46 PM
     #17956
    I mine on Windows but the answer would be yes. Besides, I use other tools to make sure my undervolting/underclocking works

  • entity279
    Newbie
    *
    Offline Offline

    Activity: 13
    Merit: 0


    View Profile
    December 11, 2017, 04:35:28 PM
     #17957
    Quote from: ninjabull on December 11, 2017, 02:13:00 AM
    Quote from: ninjabull on December 10, 2017, 10:54:17 AM
    I'm having problems getting the miner to work (cannot allocate big buffer for DAG).

    I've tried increasing page file to 17-25GB, using the env. variables and even using the benchmark 10 flag. Nothing works, while etherminer is working fine.

    I have never been able to run this miner. Any suggestions?


    Code:
    04:18:38:819 1ff0 Check and remove old log files...
    04:18:38:824 1ff0 args: -benchmark 10
    04:18:38:827 1ff0
    04:18:38:831 1ff0 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
    04:18:38:835 1ff0 º     Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.2      º
    04:18:38:838 1ff0 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
    04:18:38:842 1ff0
    04:18:39:703 1ff0 OpenCL platform: NVIDIA CUDA
    04:18:39:708 1ff0 AMD OpenCL platform not found
    04:18:40:451 1ff0 CUDA initializing...

    04:18:40:456 1ff0 NVIDIA Cards available: 1
    04:18:40:461 1ff0 CUDA Driver Version/Runtime Version: 9.1/8.0
    04:18:40:466 1ff0 GPU #0: GeForce GTX 970, 4096 MB available, 13 compute units, capability: 5.2

    04:18:40:471 1ff0 Total cards: 1
    04:18:44:108 1ff0 No AMD cards in the list, ADL library will not be used.
    04:18:44:114 1ff0 NVML version: 9.388.59
    04:18:44:230 1ff0 CUDA error 0 #102 - 46
    04:18:44:393 1ff0 CUDA error 0 #103 - 46
    04:18:44:493 1ff0 CUDA error 0 #105 - 46
    04:18:44:609 1ff0

    04:18:44:614 1ff0
    BENCHMARK MODE!

    04:18:44:632 1e70 Setting DAG epoch #10...
    04:18:45:075 970 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
    04:18:45:080 970 ETH: GPU0 0.000 Mh/s
    04:18:45:683 1e70 Setting DAG epoch #10 for GPU0
    04:18:45:688 1e70 Create GPU buffer for GPU0
    04:18:45:774 1e70 CUDA error - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.

    04:18:48:091 970 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
    04:18:48:091 970 ETH: GPU0 0.000 Mh/s
    04:18:48:794 1e70 Set global fail flag, failed GPU0
    04:18:48:794 1e70 GPU 0 failed
    04:18:48:794 1e74 Setting DAG epoch #10 for GPU0
    04:18:48:894 1e74 GPU 0, CUDA error 46 - cannot write buffer for DAG

    04:18:51:110 970 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
    04:18:51:122 970 ETH: GPU0 0.000 Mh/s

    Thank you.

    I left it and let it restart itself 10-12 times and then it started to work.

    I'm guessing this isn't normal?

    Yup. Only hints I have is (1 ) check your page file. You have a single card so you shouldn't need to much, just say 4 GB. (2) try a clean reinstalation of drivers  or a install a different version

  • schilling2k
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    December 11, 2017, 05:25:48 PM
     #17958
    Hey guys,

    just a quick question: in general, what would you recommend for mining ethereum? Windows or Linux?
    Any additional thoughts on this?

    Thanks & Best,
    Daniel

  • Ursul0
    Sr. Member
    ****
    Offline Offline

    Activity: 857
    Merit: 262


    View Profile
    December 11, 2017, 06:21:34 PM
     #17959
    Quote from: Trimegistus on December 11, 2017, 11:12:03 AM
    Quote from: Swiped on December 10, 2017, 02:53:59 PM
    I recently put a machine on ETC and updated the drivers to the blockchain drivers, so the machine mines faster now, but is more unstable, even when I shut off dual mining.  Can anyone share with me their run parameters for a Sapphire rx nitro (non-plus) 480 8g card?  I am running windows 10 with v 10.2 with the August 23rd blockchain drivers.  Would love a suggestion on how to get this to run stable and not have cards tripping out.  I have tried raising and lowering voltages, lowering ethi to 1, and turning off dual mode, but not really found a stable set up.  Appreciate any thoughts.
    Thanks

    I'm using this config.

    Code:
    -epool eu1.ethermine.org:4444
    -ewal xxxxx
    #-eworker
    -epsw x
    -esm 0
    -allpools 1
    -mode 1
    -estale 1
    -ethi 16
    -gser 2
    -wd 1
    -r 0
    -dbg -1
    -tt 75
    -ttdcr 80
    -ttli 85
    -tstop 90
    -cclock 900
    -cvddc 800
    -mclock 1750
    -mvddc 800
    -powlim -10

    Works like a charm on my 6x480 rig Grin

    no wonder it works like a charm. Are you getting 24MH/card at least?

  • Trimegistus
    Legendary
    *
    Offline Offline

    Activity: 1565
    Merit: 1027



    View Profile
    December 11, 2017, 08:08:16 PM
     #17960
    Quote from: Ursul0 on December 11, 2017, 06:21:34 PM
    Quote from: Trimegistus on December 11, 2017, 11:12:03 AM
    Quote from: Swiped on December 10, 2017, 02:53:59 PM
    I recently put a machine on ETC and updated the drivers to the blockchain drivers, so the machine mines faster now, but is more unstable, even when I shut off dual mining.  Can anyone share with me their run parameters for a Sapphire rx nitro (non-plus) 480 8g card?  I am running windows 10 with v 10.2 with the August 23rd blockchain drivers.  Would love a suggestion on how to get this to run stable and not have cards tripping out.  I have tried raising and lowering voltages, lowering ethi to 1, and turning off dual mode, but not really found a stable set up.  Appreciate any thoughts.
    Thanks

    I'm using this config.

    Code:
    -epool eu1.ethermine.org:4444
    -ewal xxxxx
    #-eworker
    -epsw x
    -esm 0
    -allpools 1
    -mode 1
    -estale 1
    -ethi 16
    -gser 2
    -wd 1
    -r 0
    -dbg -1
    -tt 75
    -ttdcr 80
    -ttli 85
    -tstop 90
    -cclock 900
    -cvddc 800
    -mclock 1750
    -mvddc 800
    -powlim -10

    Works like a charm on my 6x480 rig Grin

    no wonder it works like a charm. Are you getting 24MH/card at least?

    Around that, yes. No noise, no heat, stable as hell, no complications whatsoever.
    Pages: « 1 ... 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 [898] 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 ... 1409 »
      Print  
Page 897
Viewing Page: 898

IRLBTC™ © 2025 IRLBTC.com