how accurate is gputemp's temperature reading? ive been using it for a couple days now and both gpus are about 55 degrees celcius every time i check. i live in quite a hot country (most days are over 30 degrees) so was worried about them overheating but from what ive been reading, others usually have their gpus running at around 70 degrees.

is msiburner a better alternative to manage temp and adjust gpu settings?

since this is my first rig i dont want to push the gpus to their limit so im tempted to leave them running as is (im currently mining a ITNS (cryptonoight), averaging around 900h/s over 24 hours)

I use Afterburner with custom fan curve, targeting between 65-70 degrees (windforce oc 3GB). But you can always take off gpu fans and using zip-ties put your own silent 120mm or 80mm fans powered by 12v, 7v or 5v from molex connector (as I do on some old 280x's).

Hi, sorry to disturb, what are the best settings for GTX 1060 3G to mine neoscrypt using ccminer (clausT)? I have set PL 70%, clk +150, mem -502.

Cheers W_M

core 250?? its really too much!!!!

My new sets of 1060s came in . The ssc is mining 5 mh more over my other 1060s. Wow the difference is amazing even though it is a Hynix memory.

I will try this later.  Thanks! I didn't realize that I should lower my core that much.

Have seen the Asus P106-100 cards and they are basically these cards with 6gb on the pcb but made for mining only as they don't have any dvi or vga output in the back of the card.
I know that msi makes their own variation of this card as well.
They have been sold out for months now as with any of these cards now.

My SSC is 24MHs, my FTWs do 20MHs. All 3 are Samsun memory.

Try reducing to 90 power limit and drop your memory to nothing. Memory clock has no impact on neoscrypt.