<<  >> (p.29)
    Author Topic: GTX 1060 discussion thread  (Read 289451 times)

    • fgm
    Newbie
    *
    Offline Offline

    Activity: 43
    Merit: 0


    View Profile
    September 02, 2017, 12:24:22 PM
     #561
    Zotac 1060 3Gb Amp Edition - Hynix memory - 15mh
    Gigabyte 1060 3Gb G1 gaming - Hynix memory - 15mh
    Gigabyte 1060 3Gb Windforce 2 - MI ( mining edition ) - Hynix memory - 15mh - 3 months warranty, watch out

    All tested last week.
    Never suppose memory is Samsung, even on 6Gb. Better test 1060 before bulk buying, you can have ugly surprises as stated above.

  • PANZERMAN
    Newbie
    *
    Offline Offline

    Activity: 1
    Merit: 0


    View Profile
    September 02, 2017, 12:41:37 PM
     #562
    Good day!
    Can someone help me, I am staying now at crossroad: what is the best GPU for mining Etherum now: 1060 6 Gb or 1070 8Gb ? And which brand is better ?
    I am going to buy MSI GeForce GTX 1060 GAMING X+ 6G, but I doubt little bit, maybe there is much better GPU for mining.
    Help me to choose...
    it is all about hashrates and capability to overclock...

  • fgm
    Newbie
    *
    Offline Offline

    Activity: 43
    Merit: 0


    View Profile
    September 02, 2017, 06:07:28 PM
     #563
    I have  2 x Gaming X 3Gb samsung, 23.8 - 24 dual mining sia, 52 power -400 core +830 mem, the best implementation of 1060 i have seen so far.
    I don't think 6gb is worth it, check the dag calculator above.

  • B2555M
    Newbie
    *
    Offline Offline

    Activity: 22
    Merit: 0


    View Profile
    September 02, 2017, 07:15:32 PM
     #564
    2x EVGA GTX 1060 3GB (+800mhz memory 80%power) - 23-24mh/sec
    2x Asus Phoenix (single fan) GTX 1060 3GB (+350 mhz memory) - 18-19mh/sec

    Whole rig 83-85mh/sec

    Using latest Ethminer CUDA version for GTX 1060 (+10% more mh)

  • Django69
    Newbie
    *
    Offline Offline

    Activity: 74
    Merit: 0


    View Profile
    September 02, 2017, 07:38:00 PM
     #565
    Quote from: B2555M on September 02, 2017, 07:15:32 PM
    2x EVGA GTX 1060 3GB (+800mhz memory 80%power) - 23-24mh/sec
    2x Asus Phoenix (single fan) GTX 1060 3GB (+350 mhz memory) - 18-19mh/sec

    Whole rig 83-85mh/sec

    Using latest Ethminer CUDA version for GTX 1060 (+10% more mh)
    samsung memory?


    if yes, you have to reach 100mh/s with 4 cards with claymore or genoil

  • B2555M
    Newbie
    *
    Offline Offline

    Activity: 22
    Merit: 0


    View Profile
    September 02, 2017, 08:52:40 PM
     #566
    Quote from: Django69 on September 02, 2017, 07:38:00 PM
    Quote from: B2555M on September 02, 2017, 07:15:32 PM
    2x EVGA GTX 1060 3GB (+800mhz memory 80%power) - 23-24mh/sec
    2x Asus Phoenix (single fan) GTX 1060 3GB (+350 mhz memory) - 18-19mh/sec

    Whole rig 83-85mh/sec

    Using latest Ethminer CUDA version for GTX 1060 (+10% more mh)
    samsung memory?


    if yes, you have to reach 100mh/s with 4 cards with claymore or genoil


    EVGA is Samsung
    Asus Hynix

    I  cant OC more like 400MHZ Asuses (hynix) because its unstable ... Its posible to get more from Claymore or genoil ? I dont think soo

  • Django69
    Newbie
    *
    Offline Offline

    Activity: 74
    Merit: 0


    View Profile
    September 02, 2017, 09:19:54 PM
     #567
    samsung => 25mh/s
    hynix => 19/20mh/s

    try with claymore !

  • B2555M
    Newbie
    *
    Offline Offline

    Activity: 22
    Merit: 0


    View Profile
    September 02, 2017, 09:35:55 PM
     #568
    Quote from: Django69 on September 02, 2017, 09:19:54 PM
    samsung => 25mh/s
    hynix => 19/20mh/s

    try with claymore !

    Which version of claymore? And what a oc settings?

  • sNaKeyz0r91
    Member
    **
    Offline Offline

    Activity: 131
    Merit: 10


    View Profile
    September 02, 2017, 10:09:37 PM
     #569
    Try latest  version (10.0) He's saying he has improved hashrate for nvidia.
    Good luck.

  • Agozyen
    Sr. Member
    ****
    Offline Offline

    Activity: 672
    Merit: 252

    Until the end


    View Profile
    September 03, 2017, 02:28:24 AM
     #570
    Getting around 20 using Claymore ETH/SIA dual miner, dcri set to 55. 

  • kinzey
    Full Member
    ***
    Offline Offline

    Activity: 254
    Merit: 100


    Blockchain with solar energy


    View Profile
    September 03, 2017, 05:47:46 AM
     #571
    nice info... thank you!!! Wink Wink Wink
    ▀▀▀▀▀▀▀  [     CRYPTOS⚫LARTECH ●     ]  ▀▀▀▀▀▀▀
      White Paper     ||   BLOCKCHAIN & ENERGY FOR A BETTER WORLD   ||     One Pager 
    Telegram      Facebook      Twitter      [[     TOKEN SALE is LIVE     ]]      Medium      Youtube      Reddit

  • killerelite
    Full Member
    ***
    Offline Offline

    Activity: 205
    Merit: 100


    View Profile
    September 03, 2017, 06:30:02 AM
     #572
    I get only 19 mh when mining eth so I mine others algos like skunk and skien etc

  • B2555M
    Newbie
    *
    Offline Offline

    Activity: 22
    Merit: 0


    View Profile
    September 03, 2017, 11:52:38 AM
     #573
    Quote from: sNaKeyz0r91 on September 02, 2017, 10:09:37 PM
    Try latest  version (10.0) He's saying he has improved hashrate for nvidia.
    Good luck.

    I get 3 less mh/sec with claymore like with Ethminer "for gtx 1060" I testing it 4 hours ....

    I have now 86-87mhsec with 2x samsung 2xhynix...

    Hynix is just bad  thats all ... Samsung have 24-25mh/sec hynix 17-18mh/s for me ... When i try gif more like +350MHZ memory it crashed ...
    FeelsBadMan
    Ty for help

  • aik6
    Newbie
    *
    Offline Offline

    Activity: 12
    Merit: 0


    View Profile
    September 03, 2017, 02:58:03 PM
     #574
    My result 4 GTX 1060 ether hashrate

    GPU0 - Asus Strix ROG GTX1060 6GB - power:58%, core:+100(1900), mem:+775(4677), fan:40%, temp:56C ==> 24.5 Mh/s

    GPU1 - Gigabyte GTX 1060 6GB G1 Gaming Edition - power:50%, core:+115(1847), mem:+850(4647), fan:50%, temp:59C ==> 24.5 Mh/s

    GPU2 - inno3d gtx 1060 6GB ichill x3 - power:65%, core:+100(1860), mem:+650(4551), fan:30%, temp:52C ==> 24 Mh/s

    GPU3 - GALAX GTX 1060 EX OC 6GB - power:75%, core:+130(1822), mem:+875(4677), fan:60%, temp:61C ==> 24.6 Mh/s

    All samsung memory
    current draw from each card approx 90w

    Driver version 382.53
    Claymore 10.0
    MSI Afterburner 4.3.0

  • DeepTerrfici
    Full Member
    ***
    Offline Offline

    Activity: 275
    Merit: 100


    Data Collecting Textile Circuitry


    View Profile
    September 03, 2017, 07:38:21 PM
     #575
    I'm running 7 msi gaming 1060 x 6g cards.
    windows 10 anniversary edition
    376.09 geforce driver
    afterburner settings: +140 core clock, +950 mem clock.
    dual mining eth/sia
    only setting changed from default in miner: -dcri is set to 46
    average effective hashrate for last 24 hours for eth according to ethermine.org is 167.7 MH/S (averaging 152.83 shares per hour)
    calculated average hashrate for last 24 hours for sia according to nanopool.org is 2640.9 MH/S (averaging 61.7 shares per hour)
    i'm calculating shares per hour by the info given in claymore (total shares divided by number of hours its been running). nanopool is reporting that i'm getting about 3 or slightly more times that number of shares of sia per hour.
    rig drawing 1130 watts.

    i just started running claymore 10. previous claymore did seem slightly more stable, but v10 has only been running for 23 hours.
    a notable improvement with claymore 10 is that at 23 hours, i have 0 rejected shares of either eth or sia. I was getting 1 and rarely even a second rejected eth share every 1000 accepted shares with previous claymore.

    any questions or tips/advice are appreciated.

  • alphaev7
    Newbie
    *
    Offline Offline

    Activity: 4
    Merit: 0


    View Profile
    September 04, 2017, 05:20:07 AM
     #576
    Quote from: aik6 on September 03, 2017, 02:58:03 PM
    My result 4 GTX 1060 ether hashrate

    GPU0 - Asus Strix ROG GTX1060 6GB - power:58%, core:+100(1900), mem:+775(4677), fan:40%, temp:56C ==> 24.5 Mh/s

    GPU1 - Gigabyte GTX 1060 6GB G1 Gaming Edition - power:50%, core:+115(1847), mem:+850(4647), fan:50%, temp:59C ==> 24.5 Mh/s

    GPU2 - inno3d gtx 1060 6GB ichill x3 - power:65%, core:+100(1860), mem:+650(4551), fan:30%, temp:52C ==> 24 Mh/s

    GPU3 - GALAX GTX 1060 EX OC 6GB - power:75%, core:+130(1822), mem:+875(4677), fan:60%, temp:61C ==> 24.6 Mh/s

    All samsung memory
    current draw from each card approx 90w

    Driver version 382.53
    Claymore 10.0
    MSI Afterburner 4.3.0

    Thanks for sharing. I'm new to this. Currently using 6 x Zotac P106-100 w/ Samsung memory - Power 75% Core:+0(1695) Mem: +500 (4513), fan: Auto, Temp: 62C ==> 23.7Mh/s

    Want to run in at this setting for at least 24hrs before moving higher, so your settings definitely helped.

    How do u test your limits and stop?

  • preda
    Sr. Member
    ****
    Offline Offline

    Activity: 756
    Merit: 250


    View Profile
    September 04, 2017, 08:47:31 AM
     #577
    new nicehash miner can push my 1060 cards more than claymore tho.


    6x 1060 3gb with nicehash 132mh eth + 3100 mh decred or 143mh eth only

    6x 1060 3gb with claymore 128mh eth+2400mh decred or 144mh eth only

  • VB1001
    Legendary
    *
    Offline Offline

    Activity: 980
    Merit: 2757


    <<CypherPunkCat>>


    View Profile WWW
    September 04, 2017, 05:40:25 PM
     #578
    What can you recommend Graphics Cards for 6GB:

    Asus Dual GTX 1060 OC 6GB or Gigabyte GeForce GTX 1060 Windforce OC 6GB?
    1PCm7LqVkhj4xRpKNyyEeekwhc1mzK52cT

  • aik6
    Newbie
    *
    Offline Offline

    Activity: 12
    Merit: 0


    View Profile
    September 04, 2017, 07:45:28 PM
    Last edit: September 04, 2017, 07:57:23 PM by aik6
     #579
    Quote from: alphaev7 on September 04, 2017, 05:20:07 AM
    Quote from: aik6 on September 03, 2017, 02:58:03 PM
    My result 4 GTX 1060 ether hashrate

    GPU0 - Asus Strix ROG GTX1060 6GB - power:58%, core:+100(1900), mem:+775(4677), fan:40%, temp:56C ==> 24.5 Mh/s

    GPU1 - Gigabyte GTX 1060 6GB G1 Gaming Edition - power:50%, core:+115(1847), mem:+850(4647), fan:50%, temp:59C ==> 24.5 Mh/s

    GPU2 - inno3d gtx 1060 6GB ichill x3 - power:65%, core:+100(1860), mem:+650(4551), fan:30%, temp:52C ==> 24 Mh/s

    GPU3 - GALAX GTX 1060 EX OC 6GB - power:75%, core:+130(1822), mem:+875(4677), fan:60%, temp:61C ==> 24.6 Mh/s

    All samsung memory
    current draw from each card approx 90w

    Driver version 382.53
    Claymore 10.0
    MSI Afterburner 4.3.0

    Thanks for sharing. I'm new to this. Currently using 6 x Zotac P106-100 w/ Samsung memory - Power 75% Core:+0(1695) Mem: +500 (4513), fan: Auto, Temp: 62C ==> 23.7Mh/s

    Want to run in at this setting for at least 24hrs before moving higher, so your settings definitely helped.

    How do u test your limits and stop?

    your welcome, glad to hear my setting useful for others  Smiley

    im testing usually until claymore show error code or driver crash

    and i also use NVSMI to see power limit and power draw from each card before apply it on Afterburner
    the highest one is Gigabyte : 180 W default

  • candyiman
    Full Member
    ***
    Offline Offline

    Activity: 308
    Merit: 100


    View Profile
    September 04, 2017, 10:11:30 PM
     #580
    Hashes on Neoscrypt?

    on 1060 3gb


    Settings?
    Miners?
    Memory Type?
    Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [29] 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 »
      Print  
Page 28
Viewing Page: 29

IRLBTC™ © 2025 IRLBTC.com