2x GTX1060 (both hynix)
Driver version 372.70 on windows 10 x64.
Core Voltage : 0%
Power Limit: 80%
Temp Limit : 83c
Core Clock : +150
Mem Clock : +515
Fan Speed : Auto
Temp: GPU0: 67C GPU1: 68C
GPU0: 288 Sol/s GPU1: 258 Sol/s
Total speed: 546 Sol/s
+-----+-------------+--------------+
| GPU | Power usage | Efficiency |
+-----+-------------+--------------+
| 0 | 93W | 3.10 Sol/W |
| 1 | 95W | 2.72 Sol/W |
+-----+-------------+--------------+
Previously,
2x GTX1060 (both hynix)
Driver version 372.7084.94 on windows 10 x64.
Core Voltage : 0%
Power Limit: 116% (max)
Temp Limit : 83c
Core Clock : +100
Mem Clock : +500
Fan Speed : Auto
Temp: GPU0: 74C GPU1: 73C
GPU0: 316 Sol/s GPU1: 285 Sol/s
Total speed: 601 Sol/s
+-----+-------------+--------------+
| GPU | Power usage | Efficiency |
+-----+-------------+--------------+
| 0 | 130W | 2.43 Sol/W |
| 1 | 120W | 2.38 Sol/W |
+-----+-------------+--------------+
Should I continue with higher hash rate even though the temp higher? Or should I stick with current hash rate?
Electricity is no issue
The increase in temperature is because of the increase in power. Any specific reason why you increased it?
2x GTX1060 (both hynix)
Driver version 372.70 on windows 10 x64.
Core Voltage : 0%
Power Limit: 80%
Temp Limit : 83c
Core Clock : +150
Mem Clock : +515
Fan Speed : Auto
Temp: GPU0: 67C GPU1: 68C
GPU0: 288 Sol/s GPU1: 258 Sol/s
Total speed: 546 Sol/s
+-----+-------------+--------------+
| GPU | Power usage | Efficiency |
+-----+-------------+--------------+
| 0 | 93W | 3.10 Sol/W |
| 1 | 95W | 2.72 Sol/W |
+-----+-------------+--------------+
Previously,
2x GTX1060 (both hynix)
Driver version 384.94 on windows 10 x64.
Core Voltage : 0%
Power Limit: 116% (max)
Temp Limit : 83c
Core Clock : +100
Mem Clock : +500
Fan Speed : Auto
Temp: GPU0: 74C GPU1: 73C
GPU0: 316 Sol/s GPU1: 285 Sol/s
Total speed: 601 Sol/s
+-----+-------------+--------------+
| GPU | Power usage | Efficiency |
+-----+-------------+--------------+
| 0 | 130W | 2.43 Sol/W |
| 1 | 120W | 2.38 Sol/W |
+-----+-------------+--------------+
Should I continue with higher hash rate even though the temp higher? Or should I stick with current hash rate?
Electricity is no issue
For the sake of losig 40sol/s id keep the first settings as you are getting better efficiency. Or as the other guy has said, reduce the power of the second settings,seems too high to me.
As I mentioned, I have cheap electricity so at that time I opt for higher hash rate. Increasing power limit gives me higher Sol/s.
Right now, I'm using the first settings, lower hash rate but in return I get to have good temperature on my card. My goal is to get a balance between hash rate and temperature, something that sit under 70C.
So far the cards didn't like memory clock above 550
