GPU: Gigabyte NVIDIA GeForce GTX 1060 3GB
OS: Windows 7 Service Pack 1

Solo ETH mining with Claymore
ETH - Total Speed: 25.0 Mh/s - 25.1 Mh/s

Solo Eth mining with ethminer, my tweak -U --cuda-devices 0 --cuda-parallel-hash 4 --cl-global-work 8192 --cuda-grid-size 4096 --farm-recheck 200
ETH - Total Speed: 25.5 Mh/s - 25.8 Mh/s

Video Ram Clock i can push to +940 - 950 but i prefer to keep to 920 or 936



cheers

Mate, there's no need to give you any advice. After you will buy them, depending on the type of memory you'll get ( I have 3 of them ASUS Dual GTX 1060 6gb with Micron memory) will depend your hashrate on Zcash or Eth. As you can read on previous pages, Hynix are the worst for Eth, stock being at 16Mh, Micron doing about 19-20Mh and Samsung going to 22-23Mh.

Good luck

Warning: hope you know modifies value it can damage your hardware soo be ware of what you doo

1. start miner with default setting on video > Msi Afterburner
2. set power limit to 70 check miner if he run fine with out any reject or stale you are ok goo to next step (power needs it depend of what miner & what coin you want to mine coz there are diferite situation)
3. set memory clock to 250 check miner look for reject stale then if all is fine set it to 300 check miner ... all fine set 400 & soo on, add 100 to each value till 600-700, depend who was made video ram, from 700 add 50 more till you will see pc crash, reject kick in, repeat all this process till you like but do not cross 950-1k !!!!
4. all this time monitor gpu temperature & adjust manualy fan speed to keep it on value what you fill comfortable ... personal i like to have on 60 max 70 because heating is one biggest enemies of electronic
5. try adjust power limit more down if is possible my target was 60-65% but i say it depend what coin & what miner you use!!!!

A. each result depend by who was made video memory samsung > hynix > micron
B. each result depend by what miner you use & what extra command you add
C. it require patience to find sweet spot were your video card work fine, if you have 2,3,4 ... video card be ware each can have diferite behavior
D. Tuning Dual Miner it require extra action to be done aka tuning miner what you use & for that you need to read post from dev post & see what other was done

read what other was done with similar video card & try to get close to that value

gl & hope it help

WOW!

I also notice this issue. At some ccminer version (or mod version), I can see nice local hashrate, but unstable hashrate at pool, but some version with less local hashrate but stable pool hashrate.

Please do test further and update us the result. Thanks!

The big profit u can get with groesti diamond coin dmd

I'm using +650 on memory, -100 core clock and power limit 80%.
22.4 MH/s

I managed to make my ASUS R.O.G. STRIX-GTX1060-O6G-GAMING 6GB (Micron Memory) stable at 24.x MH/s with the following settings.
Power Limit: 116
Core Clock: +110
Memory: +650
Base Boost is 2088MHz/4551 MHz.

I tried lowering the power limit to save power but it will drop the hashrate to 22 below.

Im currently using Genoil ethereum miner (no DevFee).

Edit: +650, not +65

It seems I forgot to add 0 in Memory: +650.
I do remember I was able to make it worked at +700 but only in Claymore and will crash after 30 mins.