<<  >> (p.1870)
    Author Topic: Swedish ASIC miner company kncminer.com  (Read 3050099 times)

    • dekodoge
    Full Member
    ***
    Offline Offline

    Activity: 168
    Merit: 100


    View Profile
    August 28, 2014, 04:56:58 PM
     #37381
    Which is exactly what i said in my first post "SWITCH"

  • user27
    Sr. Member
    ****
    Offline Offline

    Activity: 266
    Merit: 250


    View Profile
    August 28, 2014, 05:39:14 PM
     #37382
    Quote from: dekodoge on August 28, 2014, 04:56:58 PM
    Which is exactly what i said in my first post "SWITCH"

    HUB... there must be a million of them on eBay for 0.99 because they aren't very good; but for a couple of miners you would see minimal collisions and it would have no effect on speed.
    ▓▓▓ BITMIXER.IO ▓▓▓▓▓▓ High Volume Bitcoin MIXER ▓▓▓

  • CozyLife
    Member
    **
    Offline Offline

    Activity: 84
    Merit: 10

    Theymos, unban my account.


    View Profile WWW
    August 28, 2014, 05:46:28 PM
     #37383
    Greetings, KNC customers! If you're looking for refunds from KNC, I've opened a petition on Change.org in order to get KNC to start issuing refunds again. Please sign the petition.

    Conversely, if you're trying to get your KNC Miner faster, I'm selling Two batch 1 titans here on BitcoinTalk and on Amazon. Check them out!
    Due to an article that BitcoinTalk didn't like that I wrote on CCN, my account is banned. Theymos refuses to reply to my request for hearing his side of the story instead of banning my account. Please sign my petition to get Theymos to unban my account. Thank you.

  • adizzle
    Newbie
    *
    Offline Offline

    Activity: 35
    Merit: 0


    View Profile
    August 28, 2014, 06:21:26 PM
     #37384
    Thanks for all your input everyone much obliged..

  • adizzle
    Newbie
    *
    Offline Offline

    Activity: 35
    Merit: 0


    View Profile
    August 28, 2014, 06:34:36 PM
     #37385
    Hey all thanks for all your help with my last question..im going to go out on a limb and hope not to get flamed much..heres my problem

    I am in the usa and have 2 neptunes...in preparation for neptunes arrival hired an electrician to provide me with a 240 breaker which he gave me 5 220v outlets. I read up on power supplies and decided to go with the recommendations from knc for 3x 850 w psu/neptune, i purchased the Evga supernova G2. The power cord i was supplied with has the 110v configuration 2 verticals and 1 ground(plug) although after speaking with evga customer support they said it was rated 100 to 240v.. my problem is my local electrician said there are no 220v outlets which can take the power cord i have.
    The electrican said he would cut the end of the cord i was supplied by evga and attach the 220v plug...is this safe I DONT WANNA BURRN DOWN MY HOUSE ..thanks all

  • AFox
    Hero Member
    *****
    Offline Offline

    Activity: 539
    Merit: 517



    View Profile
    August 28, 2014, 06:49:26 PM
     #37386
    Quote from: adizzle on August 28, 2014, 06:34:36 PM
    The electrican said he would cut the end of the cord i was supplied by evga and attach the 220v plug...is this safe I DONT WANNA BURRN DOWN MY HOUSE ..thanks all
    The best would be to buy the cable directly (it's standard, look at the image).
    If the cutting/attaching is done by an electrician, he knows what he's doing, it's safe.
    My lucky BTC address : 1LoTTerY3WYbGxVRHvh8oDudDdTxFvvqWF

  • samsonn25
    Hero Member
    *****
    Offline Offline

    Activity: 882
    Merit: 1003



    View Profile
    August 28, 2014, 07:44:59 PM
     #37387
    Im sure you need a female C13 onto the PSu and the other end depends on the wall mount your electrician puts in:

    http://www.quail.com/C-1553/Power-Cords-High-Voltage%2fCurrent-Power-Cords-IEC-Auto-Lock-Power-Cords-.aspx?lc=true&1553=SQBFAEMALQA2ADAAMwAyADAALQBDADEAMwAgAEEAVQBUAE8ALQBMAE8AQwBLAA==

  • xhomerx10
    Legendary
    *
    Offline Offline

    Activity: 4410
    Merit: 10573



    View Profile
    August 28, 2014, 07:49:22 PM
     #37388
    Quote from: AFox on August 28, 2014, 06:49:26 PM
    Quote from: adizzle on August 28, 2014, 06:34:36 PM
    The electrican said he would cut the end of the cord i was supplied by evga and attach the 220v plug...is this safe I DONT WANNA BURRN DOWN MY HOUSE ..thanks all
    The best would be to buy the cable directly (it's standard, look at the image).
    If the cutting/attaching is done by an electrician, he knows what he's doing, it's safe.


     Sure it's safe as long as the connections are good.  As a bonus, it's only half the current so there should be less heating.

  • Cablez
    Legendary
    *
    Offline Offline

    Activity: 1400
    Merit: 1000


    I owe my soul to the Bitcoin code...


    View Profile
    August 28, 2014, 07:58:32 PM
     #37389
    Actually, I have (5) new 3ft power cords for 220v available if anyone wants them.  They are Nema 6-20p on the plug side and C19 on the other which will connect directly on high power PSUs like the EVGA 1600W monster which has a C20.

    PM me if you are interested.
    Tired of substandard power distribution in your ASIC setup???   Chris' Custom Cablez will get you sorted out right!  No job too hard so PM me for a quote
    Check my products or ask a question here: https://bt.irlbtc.com/view/74397.0

  • tolip_wen
    Sr. Member
    ****
    Offline Offline

    Activity: 386
    Merit: 250


    View Profile
    August 28, 2014, 08:41:11 PM
     #37390
    Quote from: adizzle on August 28, 2014, 06:34:36 PM
    Hey all thanks for all your help with my last question..im going to go out on a limb and hope not to get flamed much..heres my problem

    I am in the usa and have 2 neptunes...in preparation for neptunes arrival hired an electrician to provide me with a 240 breaker which he gave me 5 220v outlets. I read up on power supplies and decided to go with the recommendations from knc for 3x 850 w psu/neptune, i purchased the Evga supernova G2. The power cord i was supplied with has the 110v configuration 2 verticals and 1 ground(plug) although after speaking with evga customer support they said it was rated 100 to 240v.. my problem is my local electrician said there are no 220v outlets which can take the power cord i have.
    The electrican said he would cut the end of the cord i was supplied by evga and attach the 220v plug...is this safe I DONT WANNA BURRN DOWN MY HOUSE ..thanks all

    Same level of safety if correct plugs are properly installed.
    Having your electrician change the ends is no more dangerous than having the same guy install the outlets.
    Plugs that have screw terminals for the wires are better than molded plugs if you consider they can be reused/repaired.
    I'd go with whatever gets the miner hashing soonest, that is also safe, unless there is a huge price difference.


    YMMV
    Smiley
    'twisted research and opinion' donations happily accepted @
    13362fxFAdrhagmCvSmFy4WoHrNRPG2V57
    My sub 1337 vanity address Wink

  • crashoveride54902
    Hero Member
    *****
    Offline Offline

    Activity: 784
    Merit: 504


    Dream become broken often


    View Profile
    August 28, 2014, 09:17:25 PM
     #37391
    Quote from: tolip_wen on August 28, 2014, 08:41:11 PM
    Quote from: adizzle on August 28, 2014, 06:34:36 PM
    Hey all thanks for all your help with my last question..im going to go out on a limb and hope not to get flamed much..heres my problem

    I am in the usa and have 2 neptunes...in preparation for neptunes arrival hired an electrician to provide me with a 240 breaker which he gave me 5 220v outlets. I read up on power supplies and decided to go with the recommendations from knc for 3x 850 w psu/neptune, i purchased the Evga supernova G2. The power cord i was supplied with has the 110v configuration 2 verticals and 1 ground(plug) although after speaking with evga customer support they said it was rated 100 to 240v.. my problem is my local electrician said there are no 220v outlets which can take the power cord i have.
    The electrican said he would cut the end of the cord i was supplied by evga and attach the 220v plug...is this safe I DONT WANNA BURRN DOWN MY HOUSE ..thanks all

    Same level of safety if correct plugs are properly installed.
    Having your electrician change the ends is no more dangerous than having the same guy install the outlets.
    Plugs that have screw terminals for the wires are better than molded plugs if you consider they can be reused/repaired.
    I'd go with whatever gets the miner hashing soonest, that is also safe, unless there is a huge price difference.


    YMMV
    Smiley

    Did this myself...made my own 220 box and chopped the plugs off and used the 220 plugs been running stable and cool for a few months now...on eBay there is special 220 plus with c13 connectors on them if your really picky
    Dreams of cyprto solving everything is slowly slipping away...Replaced by scams/hacks Sad

  • smoothrunnings
    Hero Member
    *****
    Offline Offline

    Activity: 644
    Merit: 502


    View Profile
    August 28, 2014, 09:50:14 PM
     #37392
    Quote from: crashoveride54902 on August 28, 2014, 09:17:25 PM
    Quote from: tolip_wen on August 28, 2014, 08:41:11 PM
    Quote from: adizzle on August 28, 2014, 06:34:36 PM
    Hey all thanks for all your help with my last question..im going to go out on a limb and hope not to get flamed much..heres my problem

    I am in the usa and have 2 neptunes...in preparation for neptunes arrival hired an electrician to provide me with a 240 breaker which he gave me 5 220v outlets. I read up on power supplies and decided to go with the recommendations from knc for 3x 850 w psu/neptune, i purchased the Evga supernova G2. The power cord i was supplied with has the 110v configuration 2 verticals and 1 ground(plug) although after speaking with evga customer support they said it was rated 100 to 240v.. my problem is my local electrician said there are no 220v outlets which can take the power cord i have.
    The electrican said he would cut the end of the cord i was supplied by evga and attach the 220v plug...is this safe I DONT WANNA BURRN DOWN MY HOUSE ..thanks all

    Same level of safety if correct plugs are properly installed.
    Having your electrician change the ends is no more dangerous than having the same guy install the outlets.
    Plugs that have screw terminals for the wires are better than molded plugs if you consider they can be reused/repaired.
    I'd go with whatever gets the miner hashing soonest, that is also safe, unless there is a huge price difference.


    YMMV
    Smiley

    Did this myself...made my own 220 box and chopped the plugs off and used the 220 plugs been running stable and cool for a few months now...on eBay there is special 220 plus with c13 connectors on them if your really picky

    By code 220v connections require a 30A circuit and 10-2 wire. A 120v/15A circuit uses 14-2 wire.

    If you burn down your house because didn't have licensed electrician wire your 220v circuits your insurance company will simply walk away because they and are allowed to.

    So is it worth the risk?

  • tolip_wen
    Sr. Member
    ****
    Offline Offline

    Activity: 386
    Merit: 250


    View Profile
    August 28, 2014, 10:47:27 PM
     #37393
    Quote from: smoothrunnings on August 28, 2014, 09:50:14 PM
    Quote from: crashoveride54902 on August 28, 2014, 09:17:25 PM
    Quote from: tolip_wen on August 28, 2014, 08:41:11 PM
    Quote from: adizzle on August 28, 2014, 06:34:36 PM
    Hey all thanks for all your help with my last question..im going to go out on a limb and hope not to get flamed much..heres my problem

    I am in the usa and have 2 neptunes...in preparation for neptunes arrival hired an electrician to provide me with a 240 breaker which he gave me 5 220v outlets. I read up on power supplies and decided to go with the recommendations from knc for 3x 850 w psu/neptune, i purchased the Evga supernova G2. The power cord i was supplied with has the 110v configuration 2 verticals and 1 ground(plug) although after speaking with evga customer support they said it was rated 100 to 240v.. my problem is my local electrician said there are no 220v outlets which can take the power cord i have.
    The electrican said he would cut the end of the cord i was supplied by evga and attach the 220v plug...is this safe I DONT WANNA BURRN DOWN MY HOUSE ..thanks all

    Same level of safety if correct plugs are properly installed.
    Having your electrician change the ends is no more dangerous than having the same guy install the outlets.
    Plugs that have screw terminals for the wires are better than molded plugs if you consider they can be reused/repaired.
    I'd go with whatever gets the miner hashing soonest, that is also safe, unless there is a huge price difference.


    YMMV
    Smiley

    Did this myself...made my own 220 box and chopped the plugs off and used the 220 plugs been running stable and cool for a few months now...on eBay there is special 220 plus with c13 connectors on them if your really picky

    By code 220v connections require a 30A circuit and 10-2 wire. A 120v/15A circuit uses 14-2 wire.

    If you burn down your house because didn't have licensed electrician wire your 220v circuits your insurance company will simply walk away because they and are allowed to.

    So is it worth the risk?

    'Code' ends @ the wall plug.

    You're saying that the wires that came with the PSUs designed for 110VAC will be too dangerous?
    I think you missed electricity 101.
    The size of wire needed depends on current not voltage.
    The insulation on the wire must also be apropriate for the voltage.
    They will be carrying 1/2 the current @ 220VAC that they would be @ 110VAC.
    I doubt you will find 110 VAC wire that is not also properly 'insulated' for 220VAC.
    Listen to the known pro with a license on the line (your electrician).


    YMMV
    Smiley
    'twisted research and opinion' donations happily accepted @
    13362fxFAdrhagmCvSmFy4WoHrNRPG2V57
    My sub 1337 vanity address Wink

  • crashoveride54902
    Hero Member
    *****
    Offline Offline

    Activity: 784
    Merit: 504


    Dream become broken often


    View Profile
    August 29, 2014, 01:00:54 AM
     #37394
    Quote from: smoothrunnings on August 28, 2014, 09:50:14 PM
    Quote from: crashoveride54902 on August 28, 2014, 09:17:25 PM
    Quote from: tolip_wen on August 28, 2014, 08:41:11 PM
    Quote from: adizzle on August 28, 2014, 06:34:36 PM
    Hey all thanks for all your help with my last question..im going to go out on a limb and hope not to get flamed much..heres my problem

    I am in the usa and have 2 neptunes...in preparation for neptunes arrival hired an electrician to provide me with a 240 breaker which he gave me 5 220v outlets. I read up on power supplies and decided to go with the recommendations from knc for 3x 850 w psu/neptune, i purchased the Evga supernova G2. The power cord i was supplied with has the 110v configuration 2 verticals and 1 ground(plug) although after speaking with evga customer support they said it was rated 100 to 240v.. my problem is my local electrician said there are no 220v outlets which can take the power cord i have.
    The electrican said he would cut the end of the cord i was supplied by evga and attach the 220v plug...is this safe I DONT WANNA BURRN DOWN MY HOUSE ..thanks all

    Same level of safety if correct plugs are properly installed.
    Having your electrician change the ends is no more dangerous than having the same guy install the outlets.
    Plugs that have screw terminals for the wires are better than molded plugs if you consider they can be reused/repaired.
    I'd go with whatever gets the miner hashing soonest, that is also safe, unless there is a huge price difference.


    YMMV
    Smiley

    Did this myself...made my own 220 box and chopped the plugs off and used the 220 plugs been running stable and cool for a few months now...on eBay there is special 220 plus with c13 connectors on them if your really picky

    By code 220v connections require a 30A circuit and 10-2 wire. A 120v/15A circuit uses 14-2 wire.

    If you burn down your house because didn't have licensed electrician wire your 220v circuits your insurance company will simply walk away because they and are allowed to.

    So is it worth the risk?

    well i have 10-2 installed...not a 30a circuit but that is ok cause i'm using less then 80% of the 20a circuit breaker anyways...only have 60a service to play with and if you look on the c13 connector, it has what its rated for...all the cords i'm using said their rated for 240v so i think i'm good Wink upto you what ya wanna do...if yer really that picky buy a darn PSD for few hundred bucks Tongue your money not ours
    Dreams of cyprto solving everything is slowly slipping away...Replaced by scams/hacks Sad

  • Zelek Uther
    Hero Member
    *****
    Offline Offline

    Activity: 700
    Merit: 514


    Run a Bitcoin node.


    View Profile
    August 29, 2014, 04:52:15 AM
     #37395
    Quote from: Cablez on August 28, 2014, 07:58:32 PM
    Actually, I have (5) new 3ft power cords for 220v available if anyone wants them.  They are Nema 6-20p on the plug side and C19 on the other which will connect directly on high power PSUs like the EVGA 1600W monster which has a C20.

    PM me if you are interested.
    Not related to above, but do you supply the communication cables that go between the Neptune controller board and each module (5 cables per Neppy)? The cables that KnC supply are very short, and limit how one can arrange the modules.
    Run a Bitcoin node, support the network.

  • user27
    Sr. Member
    ****
    Offline Offline

    Activity: 266
    Merit: 250


    View Profile
    August 29, 2014, 08:14:03 AM
     #37396
    Quote from: tolip_wen on August 28, 2014, 10:47:27 PM
    You're saying that the wires that came with the PSUs designed for 110VAC will be too dangerous?
    I think you missed electricity 101.
    tolip hit the nail on the head as usual! The conductors can carry the current easily (double 110v spec) but 110v cables are not necessarily insulated to carry 220v; need to check it or simply buy the right thing to start with.

    u27

    Quote from: Zelek Uther on August 29, 2014, 04:52:15 AM
    Quote from: Cablez on August 28, 2014, 07:58:32 PM
    Actually, I have (5) new 3ft power cords for 220v available if anyone wants them.  They are Nema 6-20p on the plug side and C19 on the other which will connect directly on high power PSUs like the EVGA 1600W monster which has a C20.

    PM me if you are interested.
    Not related to above, but do you supply the communication cables that go between the Neptune controller board and each module (5 cables per Neppy)? The cables that KnC supply are very short, and limit how one can arrange the modules.

    Not related to the above but I still have a bunch of those in 0.75m

    https://bt.irlbtc.com/view/170332.msg7842524#msg7842524
    ▓▓▓ BITMIXER.IO ▓▓▓▓▓▓ High Volume Bitcoin MIXER ▓▓▓

  • poodle63
    Hero Member
    *****
    Offline Offline

    Activity: 2702
    Merit: 510


    View Profile
    August 29, 2014, 10:08:34 AM
     #37397
    Humble request, would KNC provide 2 to 1 pcie socket for both benefit!?

    then we don't need to try lot of things, will knc support?

  • user27
    Sr. Member
    ****
    Offline Offline

    Activity: 266
    Merit: 250


    View Profile
    August 29, 2014, 10:37:10 AM
     #37398
    Quote from: poodle63 on August 29, 2014, 10:08:34 AM
    Humble request, would KNC provide 2 to 1 pcie socket for both benefit!?

    then we don't need to try lot of things, will knc support?

    They were too cheap to include a second and third PCI-e power socket so I'm guessing that's unlikely; plus it wouldn't actually solve the single socket problem.
    ▓▓▓ BITMIXER.IO ▓▓▓▓▓▓ High Volume Bitcoin MIXER ▓▓▓

  • Tigggger
    Legendary
    *
    Offline Offline

    Activity: 1098
    Merit: 1000



    View Profile
    August 29, 2014, 11:13:58 AM
     #37399
    Quote from: user27 on August 29, 2014, 10:37:10 AM
    Quote from: poodle63 on August 29, 2014, 10:08:34 AM
    Humble request, would KNC provide 2 to 1 pcie socket for both benefit!?

    then we don't need to try lot of things, will knc support?

    They were too cheap to include a second and third PCI-e power socket so I'm guessing that's unlikely; plus it wouldn't actually solve the single socket problem.

    More importantly that would be acknowledging there is a problem, so it will never happen.

  • suzukii
    Full Member
    ***
    Offline Offline

    Activity: 161
    Merit: 100


    View Profile
    August 29, 2014, 11:54:42 AM
     #37400
    Greetz everyone.

    I'm in the United States.
    After 4 months of having a paid in full status on KNC's website for my batch 2 Neppy (even though I requested a refund, they still shipped) I get this message yesterday from the UPS Message center:

    "UPS DELIVERY Exception Reason:
    A VALID TAX ID OR DEFERMENT NUMBER IS MISSING AND IS REQUIRED FOR CLEARANCE. WE ARE WORKING TO OBTAIN THIS INFORMATION. Exception Resolution:THE PACKAGE IS AT THE CLEARING AGENCY AWAITING FINAL RELEASE."

    Does this mean that I have to have a Tax I.D., go to UPS & pay taxes which is even more money than I already paid $10.2KUSD?  If so, lesson learned. Never again.
    Does anyone here have this experience?
    Regards,

    Suzukii

    (Live long & ...keep mining)

    Hardware:
    Avalon 200Gh/s 55nm | Raspberry Pi model B | Minepeon 0.2.4.3 (...was 0.2.5-pr2) | BFGMiner 3.10.0 | 28x Manhattan USB 2.0/3.0 powered Hub | 5x ASIC Block Erupter @333 MH/s | 3x BFL Jalapeño's Total ~232.7 GH/s
    Pages: « 1 ... 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 [1870] 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 ... 2136 »
      Print  
Page 1869
Viewing Page: 1870

IRLBTC™ © 2025 IRLBTC.com