WTF is with some of you, my temps don't exceed 50C, and you're running your cards at 75+?
How will it be when the outside temp is like 40C at summer?

Also your fans will die in like few months.
Do a custom fan curve for gods sake and open your windows, or install an AC for the summer months atleast.

What is your ambient temperature anyway?

see @neekir there is your problem

your temp limit is 78 (you are already on limit) & you let fan auto speed aka your gpu are already to 77 so is exactly what i think aka you get low hspeed because miner it lower intensity to protect (I/s: = intensity sec)

try this setting:

- Power Limit 74 = this it suppose to lower heat to a max ~62 my be ~63 depend how is your ambience temp
- set Fan speed to a permanent 65 - 70% (tune your value till you see you get lower temperature) let them work on auto sometime it work badly better keep them on a specific speed always coz your rig is never stop & never rest

idea is to high temperature it lower gpu & miner intensity because it try to self protect so who say keep them on high temp is good tell them to goo to hell .... yes actual gpu can run on high temp BUT that not means it is normal most bad enemies for all electronic is temp & dust
- Temperature limit 80
- Lower GPU clock to 160 that means it will lower temperature to & it will alow to increase memory probabil bigger value but i say agen on equihash speed memory count less

yes hynix is worst vs samsung from any point of view but see what i tell about equihash algoritm ... if you was mining eth i say yup is relevant but in our case nop

the point is you need to get a balance between power usage > temp > fan speed other way you get scrue up your self losing a lot from income & killing your equipment, tuning you can make it with out stop & start miner app if you using windows & msi afterburner but it possible to crash till you find right combo ...

same get a better pool with better latency 250 is bad bad bad special for a dedicate rig

hope it help

Thank you Sir_blacks and Atronoss

I am trying this now......Will let you know the result in one hr. I can see improvement with hash comparing to the old one.

I am from India, I am using Nicehash India Pool , not sure, Which pool is better

Im still using 0.5.8
works great on 1060 6gbx 6 (micron)

========== Sol/s: 1913.9 Sol/W: 3.33  Avg: 1900.9 I/s: 1018.4 Sh: 5.16   1.00 72
   GPU0  42C  Sol/s: 313.6  Sol/W: 3.35  Avg: 318.2  I/s: 170.0  Sh: 0.93   1.00 78
   GPU1  42C  Sol/s: 316.0  Sol/W: 3.32  Avg: 316.3  I/s: 169.6  Sh: 0.89   0.99 78
   GPU2  45C  Sol/s: 305.2  Sol/W: 3.30  Avg: 314.9  I/s: 168.7  Sh: 0.80   1.00 78
   GPU3  42C  Sol/s: 313.0  Sol/W: 3.33  Avg: 316.9  I/s: 169.9  Sh: 0.89   1.00 63  +
   GPU4  41C  Sol/s: 315.4  Sol/W: 3.31  Avg: 315.5  I/s: 169.3  Sh: 0.87   1.00 62  ++
   GPU5  32C  Sol/s: 327.6  Sol/W: 3.35  Avg: 319.1  I/s: 171.0  Sh: 0.79   1.00 78

here is my msi burner settings

https://ibb.co/igjny7

I increased core clock to 190, rest of the settings same, need to see it stays with out crashing, Thanks a lot for giving me valuable knowledge

Coreclock +190 mem 0 fan 75% fixed temp 72 power 74

  ========== Sol/s: 2001.4 Sol/W: 3.43  Avg: 1974.2 I/s: 1068.0 Sh: 5.27   1.00 293
   GPU0  71C  Sol/s: 282.7  Sol/W: 3.51  Avg: 276.3  I/s: 150.0  Sh: 0.69   1.00 242
   GPU1  71C  Sol/s: 287.3  Sol/W: 3.38  Avg: 285.5  I/s: 153.9  Sh: 0.52   1.00 250
   GPU2  71C  Sol/s: 287.9  Sol/W: 3.51  Avg: 280.2  I/s: 151.5  Sh: 0.57   1.00 243
   GPU4  71C  Sol/s: 284.4  Sol/W: 3.46  Avg: 281.4  I/s: 153.2  Sh: 0.75   1.00 259
   GPU3  71C  Sol/s: 278.3  Sol/W: 3.52  Avg: 276.0  I/s: 150.9  Sh: 0.74   1.00 252
   GPU5  71C  Sol/s: 290.4  Sol/W: 3.37  Avg: 288.7  I/s: 156.0  Sh: 0.86   1.00 271
   GPU6  69C  Sol/s: 290.8  Sol/W: 3.29  Avg: 286.6  I/s: 154.3  Sh: 1.03   1.00 540
   ========== Sol/s: 2001.9 Sol/W: 3.43  Avg: 1974.7 I/s: 1069.8 Sh: 5.16   1.00 293

@neekir do not increse clock to much aka +160-170 is aceptable one for 74 Power limit you risc 2 thing: get agen more temperature & fry gpu force him to goo on higher clock with less power

make this hapen, i know easy to say hard to be done
then you will be fine, so do this:
- Power limit 74, temp limit 80, core clock +160(my udvice max 165), mem clock 0(100-150), Fan: 75% fixed
glad i was can help you
cheer

@dstm

can you please output information about new job work IDs from pool
for example in line
> : indicates that a new job was received

Thanks in advance.

@neekir
GTX 1060 3GB Hynix memory:
For Equihash algo, some may say "don't tweak the memory, only the core". In case of the GTX 1060 both influence the hashrate positively (tested!).
Hynix can do mem +500, even +600, but errors will start to appear, so stick with +500 as maximum OC.
The 1060 core can be set to 2050MHz with stable performance. Above that... riscky.

So... Fireup Afterburner, make this custom fan curve in settings (check Enable user defined automatic fan control): 30C-20%, 40C-35%, 50C-50%, 80C-80%, 85C-85%. Above 85% fan speed > fan will have a short life!
At GPU OC settings, Fan control > check to be lighted up the Auto button and that little wheel (user defined auto control ON).
Start XMRig to mine some ETN on a stable pool like hashvault, or nanopool, or whatever.
After starting the cryptonight miner, you will see in Afterburner the speeds of your core and memory as stable values (with ZEC miners, the core freq. varries, so you can't tune it properly).
Now, with XMRig on, in Afterburner set:
-unlink power limit and temp limit;
-power limit 85;
-temp limit 80 (or 83);
-core +100;
-mem +500.
You will see the mem has 4303 MHz.
Now you tune the core with +/-5MHz, +/-1Mhz untill you have a stable 2050MHz.
These are your maximum stable OC settings for GTX 1060 3GB.
For ex. a EVGA SC card will need somewhere between core +30 and +65 to rich 2050MHz. MSI +101/+115... etc. depending on the default clocks.
Now, you can shutdown XMRig, and start mining with DSTM's ZM some ZEC or ZCL, or whatever...
With these settings, my rig of 6 GTX 1060 3GB, in Windows 10, with ZM, stays at 300-320 sol/s on each GPU, at a ~1880 sol/s in total.
My temps are at 50-52C, but my room temp is 12-15C.

P.S.: for mining cryptonights with this GPU, set power limit 65, temp 80, core -100, mem +500. It's memory intensive, core must stay underpowered. You can have 480-490 h/s in XMRig.

Thanks a lot Onecryptoguy, I tried mem 450+ for equihash, but Zotac one does not support any where above 400, it is not stable, 500 it crashes, where 450 + runs for an hr , and it is not stable, ideally 400 is ok.

I am not mining in cryptotonight, so I did not try that settings.

Thanks for the research and sharing of cryptotonight settings.....