I tried with 700 of memory but it stops after a few hours. I know I can increase the power but I think this efficiency is fine, thanks!

Anyone using Msi 1070Ti's..?  I lowered the core clock to 60 and it still freezes up my cpu.

Hi DSTM!

After switching to the 2-nd pool from the config, after what time interval will the availability check of the 1st pool be? Last night, at 5-14, there was a reconnection to the 2nd pool, and back to 8-47 dstm for the 1st pool did not switch. At 8-47, I closed the program, reopened and the connection to the 1st pool was successful, although I suspect that it was already a long time working. After what time after switching to an alternative pool, is the availability check of the main pool checked?

2018-03-07 5:13:47|   ========== Sol/s: 4387.7 Sol/W: 2.91  Avg: 4364.8 I/s: 2338.9 Sh: 7.28   1.00 1607
2018-03-07 5:13:48|   GPU5  49C  Sol/s: 506.6  Sol/W: 2.93  Avg: 510.6  I/s: 273.6  Sh: 0.84   1.00 969 +
2018-03-07 5:13:49|   GPU6  52C  Sol/s: 511.4  Sol/W: 2.93  Avg: 511.4  I/s: 274.1  Sh: 0.87   1.00 953 +
2018-03-07 5:13:49|   GPU4  56C  Sol/s: 511.4  Sol/W: 2.98  Avg: 507.4  I/s: 272.3  Sh: 0.85   0.99 1828 +
2018-03-07 5:13:50|   GPU1  54C  Sol/s: 504.6  Sol/W: 2.89  Avg: 511.9  I/s: 274.5  Sh: 0.85   1.00 2969
2018-03-07 5:13:53|#  connection closed by server r:0
2018-03-07 5:13:53|#  reconnecting
2018-03-07 5:14:03|#  connected to: btcp.suprnova.cc:6822 [1/2]
2018-03-07 5:14:18|sinit timeout
2018-03-07 5:14:20|#  connected to: 94.23.199.191:3333 [2/2]
2018-03-07 5:14:23|#  server set difficulty to: 0004189374bc6a7ef9db22d0...
2018-03-07 5:14:44|>  GPU0  57C  Sol/s: 793.4  Sol/W: 2.85  Avg: 793.4  I/s: 424.9  Sh: 2.99   1.00 63  +
2018-03-07 5:14:45|>  GPU1  50C  Sol/s: 517.0  Sol/W: 2.92  Avg: 517.0  I/s: 275.9  Sh: 0.00   . .   
2018-03-07 5:14:47|>  GPU2  48C  Sol/s: 519.4  Sol/W: 3.11  Avg: 519.4  I/s: 275.2  Sh: 3.00   1.00 297 +


......



2018-03-07 8:47:26|#  zm 0.6
2018-03-07 8:47:26|#  GPU0 + GeForce GTX 1080 Ti      MB: 11264 PCI: 5:0
2018-03-07 8:47:26|#  GPU1 + GeForce GTX 1070         MB: 8192  PCI: 1:0
2018-03-07 8:47:26|#  GPU2 + GeForce GTX 1070         MB: 8192  PCI: 2:0
2018-03-07 8:47:26|#  GPU3 + GeForce GTX 1070         MB: 8192  PCI: 3:0
2018-03-07 8:47:26|#  GPU4 + GeForce GTX 1070         MB: 8192  PCI: 6:0
2018-03-07 8:47:26|#  GPU5 + GeForce GTX 1070         MB: 8192  PCI: 7:0
2018-03-07 8:47:26|#  GPU6 + GeForce GTX 1070         MB: 8192  PCI: 8:0
2018-03-07 8:47:26|#  GPU7 + GeForce GTX 1070         MB: 8192  PCI: 10:0
2018-03-07 8:47:26|
2018-03-07 8:47:26|#  using configuration file zm.cfg
2018-03-07 8:47:26|#  pool1 btcp.suprnova.cc:6822
2018-03-07 8:47:26|#  pool2 94.23.199.191:3333
2018-03-07 8:47:26|
2018-03-07 8:47:26|#  telemetry server listening on 192.168.1.103:2003
2018-03-07 8:47:26|#  connected to: btcp.suprnova.cc:6822 [1/2]
2018-03-07 8:47:28|#  server set difficulty to: 000f0f0f0f0f0f0f0f0f0f0f...
2018-03-07 8:47:50|>  GPU0  55C  Sol/s: 791.6  Sol/W: 2.83  Avg: 791.6  I/s: 422.0  Sh: 11.99  1.00 54  ++++
2018-03-07 8:47:50|>  GPU1  50C  Sol/s: 506.2  Sol/W: 2.90  Avg: 506.2  I/s: 270.4  Sh: 0.00   . .   
2018-03-07 8:47:52|>  GPU2  48C  Sol/s: 500.3  Sol/W: 2.99  Avg: 500.3  I/s: 270.7  Sh: 17.91  1.00 49  ++++++

Thank you very much for your answer! When will the version 0.6.1 be released?

Hello DSTM.

Could you please change GPU sorting method ? We need what GPUs are sorted by physical bus index (it matches AfterBurner list of GPUs)

[FIXED]

Just plugged it into HDMI output and it start working

----------------------------------------------------

Has there been an updates recently

The console is adding another line and its very hard to read.

64
========== Sol/s: 1022.1 Sol/W: 4.15 Avg: 1030.3 I/s: 550.7 Sh: 4.99 0.90
206
GPU0 52C Sol/s: 503.5 Sol/W: 4.10 Avg: 512.7 I/s: 274.6 Sh: 2.53 0.91
80
GPU1 42C Sol/s: 509.2 Sol/W: 4.19 Avg: 516.2 I/s: 276.2 Sh: 2.30 0.90
64
========== Sol/s: 1012.7 Sol/W: 4.14 Avg: 1028.9 I/s: 550.8 Sh: 4.84 0.90
72
GPU0 52C Sol/s: 518.4 Sol/W: 4.11 Avg: 513.1 I/s: 274.5 Sh: 2.57 0.92
59
GPU1 42C Sol/s: 501.2 Sol/W: 4.18 Avg: 515.1 I/s: 276.1 Sh: 2.57 0.92
199
========== Sol/s: 1019.5 Sol/W: 4.14 Avg: 1028.3 I/s: 550.6 Sh: 5.13 0.92
129

Hello dstm,

So I'm a total newbie, as you can tell by my forum join date.. In fact, this is my first post here on the bitcointalk.org forums. I'm so new that I just switched from NiceHash yesterday. I switched to your miner, and have had zero issues with it. It works, it's easy to setup (even for a new guy like me). Zero complaints. Thank you very much for such a great piece of software.

I do, however, have one question...It was my understanding that this miner includes a 1% dev fee, enumerated by an asterisk in the output line.

I have been keeping a very close eye on the output, and I have never seen one share go to you yet. That's in a non-stop 24 hour period.

I have absolutely no problem with paying the dev fee at all; I would like to make sure that my little mining rig helps support you and your efforts. So the question is... how come I'm not paying you your 1%?

Edit: OK, so no sooner had I hit the post button than a line shows up with an asterisk in it. So it turns out you are getting the dev fee.

Thank you again for your great miner. It's also really nice to see you responding to your users.

Well, I think most can approach or exceed 4 solw on 1080s with dstm--I have some, and found around 4 sol/w at something like +125 core, +500 or 600 mem, with linux (SMOS) and about 70% total power draw. Are you using windows or linux?

ZM doesn't change your performance settings of your GPUs. You have to use external tools for this.