<<  >> (p.134)
    Author Topic: [ANN] dstm's ZCash Equihash Nvidia Miner v0.6.2 (Linux Windows)  (Read 225290 times)

    • sir_blacks
    Jr. Member
    *
    Offline Offline

    Activity: 119
    Merit: 3


    View Profile
    February 19, 2018, 03:00:48 PM
     #2661
    Quote from: Shodo on February 19, 2018, 02:28:43 PM
    Can someone please explain me one thing.
    When I run DSTM or EWBF I have one card that starts ok but then goes down very fast to 1/2 hashrate.
    NVIDIA Inspector shows very small (about 30-40%) usage of MCU on that card.
    If I run ccminer (any algo) - all is fine, all cards are equal. So it seems to me that this is an equihash issue.
    Please check card 1. Sometimes it shows shares like .. That card is totally equal with 7.8.9 GPUs, so it must give 750 h/s

    Defective card?

    2018-02-19 17:47:37|   ========== Sol/s: 7020.9 Sol/W: 2.65  Avg: 7058.2 I/s: 3777.9 Sh: 3.89   1.00 184
    2018-02-19 17:47:42|   GPU0  53C  Sol/s: 700.6  Sol/W: 3.29  Avg: 698.9  I/s: 370.6  Sh: 0.18   1.00 172
    2018-02-19 17:47:43|   GPU1  53C  Sol/s: 371.2  Sol/W: 1.96  Avg: 370.1  I/s: 199.0  Sh: 0.00   . .
    2018-02-19 17:47:45|   GPU2  68C  Sol/s: 756.9  Sol/W: 2.57  Avg: 755.6  I/s: 405.2  Sh: 0.54   1.00 187 +
    2018-02-19 17:47:47|   GPU3  64C  Sol/s: 735.8  Sol/W: 2.70  Avg: 742.6  I/s: 398.2  Sh: 0.18   1.00 188
    2018-02-19 17:47:48|   GPU4  66C  Sol/s: 761.2  Sol/W: 2.71  Avg: 759.7  I/s: 405.8  Sh: 0.36   1.00 188 +
    2018-02-19 17:47:50|   GPU5  61C  Sol/s: 754.7  Sol/W: 2.61  Avg: 760.5  I/s: 408.4  Sh: 0.73   1.00 187
    2018-02-19 17:47:53|   GPU6  66C  Sol/s: 690.1  Sol/W: 2.83  Avg: 694.7  I/s: 372.7  Sh: 0.36   1.00 172
    2018-02-19 17:47:54|   GPU7  56C  Sol/s: 758.7  Sol/W: 2.50  Avg: 761.1  I/s: 407.2  Sh: 0.18   1.00 187
    2018-02-19 17:47:57|   GPU8  55C  Sol/s: 751.9  Sol/W: 2.76  Avg: 754.9  I/s: 404.9  Sh: 0.54   1.00 187
    2018-02-19 17:47:59|   GPU9  62C  Sol/s: 769.0  Sol/W: 2.56  Avg: 759.6  I/s: 406.4  Sh: 0.91   1.00 188
    2018-02-19 17:47:59|   ========== Sol/s: 7050.1 Sol/W: 2.65  Avg: 7057.6 I/s: 3778.4 Sh: 3.99   1.00 184
    2018-02-19 17:48:04|   GPU0  53C  Sol/s: 693.4  Sol/W: 3.29  Avg: 698.6  I/s: 370.9  Sh: 0.17   1.00 172
    2018-02-19 17:48:05|   GPU1  54C  Sol/s: 370.9  Sol/W: 1.96  Avg: 370.2  I/s: 199.0  Sh: 0.00   . .
    2018-02-19 17:48:07|   GPU2  69C  Sol/s: 748.8  Sol/W: 2.56  Avg: 755.2  I/s: 405.2  Sh: 0.51   1.00 187
    2018-02-19 17:48:09|   GPU3  65C  Sol/s: 742.9  Sol/W: 2.70  Avg: 742.6  I/s: 398.2  Sh: 0.17   1.00 188
    2018-02-19 17:48:10|   GPU4  66C  Sol/s: 753.4  Sol/W: 2.71  Avg: 759.3  I/s: 405.8  Sh: 0.34   1.00 188
    2018-02-19 17:48:13|>  GPU5  61C  Sol/s: 745.9  Sol/W: 2.60  Avg: 759.6  I/s: 408.4  Sh: 0.68   1.00 187
    2018-02-19 17:48:15|>  GPU6  66C  Sol/s: 701.3  Sol/W: 2.83  Avg: 695.1  I/s: 373.0  Sh: 0.34   1.00 172
    2018-02-19 17:48:16|>  GPU7  57C  Sol/s: 759.3  Sol/W: 2.50  Avg: 761.0  I/s: 406.9  Sh: 0.34   1.00 188 +
    2018-02-19 17:48:19|>  GPU8  55C  Sol/s: 758.9  Sol/W: 2.76  Avg: 755.1  I/s: 404.9  Sh: 0.51   1.00 187
    2018-02-19 17:48:21|>  GPU9  62C  Sol/s: 758.5  Sol/W: 2.56  Avg: 759.5  I/s: 406.1  Sh: 0.85   1.00 188
    2018-02-19 17:48:21|   ========== Sol/s: 7033.5 Sol/W: 2.65  Avg: 7056.1 I/s: 3778.3 Sh: 3.92   1.00 184


    @Shodo if that card alone run at max speed with out problem i doubt is Defective card or riser ... single issue what came in my mind is Power or miner have issue suport 10 card. Anyway i see you have 10 card, try to run with lower batch like 3 card, 4 card, 5 card & see if that wierd bug it happen & if it apear at some higher combo. IF bug is about to many card then single solution what i have in my mind to run 2 diferite miner sesion like 5 card to a pool 5 other to other pool ... or in any stable combo you find ... same i not think it need to be full restart your rig just stop miner & restart is inaff for testing special i see bug it strike fast under 2-3 min ...

    cheers

  • giveen1
    Newbie
    *
    Offline Offline

    Activity: 70
    Merit: 0


    View Profile
    February 19, 2018, 03:47:29 PM
     #2662
    Quote from: josegve on February 19, 2018, 10:06:35 AM
       GPU1  76C  Sol/s: 286.3  Sol/W: 3.26  Avg: 285.0  I/s: 154.4  Sh: 1.01   1.00 159 +
       GPU2  78C  Sol/s: 288.5  Sol/W: 3.28  Avg: 284.7  I/s: 153.8  Sh: 1.07   1.00 166
       GPU0  74C  Sol/s: 293.8  Sol/W: 3.26  Avg: 286.5  I/s: 155.0  Sh: 0.80   1.00 157 ++
       GPU4  76C  Sol/s: 281.8  Sol/W: 3.24  Avg: 284.2  I/s: 153.0  Sh: 0.91   1.00 141
       GPU5  75C  Sol/s: 291.0  Sol/W: 3.24  Avg: 284.4  I/s: 153.1  Sh: 1.00   1.00 161
       GPU3  77C  Sol/s: 287.3  Sol/W: 3.29  Avg: 285.8  I/s: 155.0  Sh: 1.13   1.00 154
       GPU6  77C  Sol/s: 283.9  Sol/W: 3.31  Avg: 280.2  I/s: 152.6  Sh: 0.98   1.00 156
       ========== Sol/s: 2012.5 Sol/W: 3.27  Avg: 1990.7 I/s: 1076.9 Sh: 6.90   1.00 156

    I personally would sacrifice a few sols to keep my temps below 70. I have 3 1060 3gb and get around 275 at stock. Are your cards too close together?

    Try dropping your TDP and then upping your core clock to counter it.

  • XFNeo
    Newbie
    *
    Offline Offline

    Activity: 4
    Merit: 0


    View Profile
    February 19, 2018, 03:54:20 PM
     #2663
    Can some one help me with json-rpc request on powershell?
    I get error like:
    Exception calling "GetResponse" with "0" argument(s): "The server committed a protocol violation. Section=ResponseStatusLine"
    When use this code:
    $url = "http://127.0.0.1:2222"
    $command = '{"id":1, "method":"getstat"}'

    $bytes = [System.Text.Encoding]::ASCII.GetBytes($command)
    $web = [System.Net.WebRequest]::Create($url)
    $web.Method = "POST"
    $web.ContentLength = $bytes.Length
    $web.ContentType = "application/x-www-form-urlencoded"
    $stream = $web.GetRequestStream()
    $stream.Write($bytes,0,$bytes.Length)
    $stream.close()

    $reader = New-Object System.IO.Streamreader -ArgumentList $web.GetResponse().GetResponseStream()
    $reader.ReadToEnd()
    $reader.Close()

    Or get The server committed a protocol violation. Section=ResponseStatusLine
    When use this code:
    $url = "http://127.0.0.1:2222"
    $command = '{"id":1, "method":"getstat"}'
    $result = Invoke-WebRequest -Uri $Url -Method Post -ContentType "application/json-rpc" -Body $command

  • somethingiswrong
    Newbie
    *
    Offline Offline

    Activity: 31
    Merit: 0


    View Profile WWW
    February 19, 2018, 05:19:47 PM
     #2664
    Nice job with version 0.6!
    And thx for the device name in the rpc report Smiley
    Keep it up!

  • crypto4pizza
    Newbie
    *
    Offline Offline

    Activity: 102
    Merit: 0


    View Profile
    February 19, 2018, 05:52:57 PM
     #2665
    Quote from: Shodo on February 19, 2018, 02:28:43 PM
    Can someone please explain me one thing.
    When I run DSTM or EWBF I have one card that starts ok but then goes down very fast to 1/2 hashrate.
    NVIDIA Inspector shows very small (about 30-40%) usage of MCU on that card.
    If I run ccminer (any algo) - all is fine, all cards are equal. So it seems to me that this is an equihash issue.
    Please check card 1. Sometimes it shows shares like .. That card is totally equal with 7.8.9 GPUs, so it must give 750 h/s

    Defective card?

    2018-02-19 17:47:37|   ========== Sol/s: 7020.9 Sol/W: 2.65  Avg: 7058.2 I/s: 3777.9 Sh: 3.89   1.00 184
    2018-02-19 17:47:42|   GPU0  53C  Sol/s: 700.6  Sol/W: 3.29  Avg: 698.9  I/s: 370.6  Sh: 0.18   1.00 172
    2018-02-19 17:47:43|   GPU1  53C  Sol/s: 371.2  Sol/W: 1.96  Avg: 370.1  I/s: 199.0  Sh: 0.00   . .
    2018-02-19 17:47:45|   GPU2  68C  Sol/s: 756.9  Sol/W: 2.57  Avg: 755.6  I/s: 405.2  Sh: 0.54   1.00 187 +
    2018-02-19 17:47:47|   GPU3  64C  Sol/s: 735.8  Sol/W: 2.70  Avg: 742.6  I/s: 398.2  Sh: 0.18   1.00 188
    2018-02-19 17:47:48|   GPU4  66C  Sol/s: 761.2  Sol/W: 2.71  Avg: 759.7  I/s: 405.8  Sh: 0.36   1.00 188 +
    2018-02-19 17:47:50|   GPU5  61C  Sol/s: 754.7  Sol/W: 2.61  Avg: 760.5  I/s: 408.4  Sh: 0.73   1.00 187
    2018-02-19 17:47:53|   GPU6  66C  Sol/s: 690.1  Sol/W: 2.83  Avg: 694.7  I/s: 372.7  Sh: 0.36   1.00 172
    2018-02-19 17:47:54|   GPU7  56C  Sol/s: 758.7  Sol/W: 2.50  Avg: 761.1  I/s: 407.2  Sh: 0.18   1.00 187
    2018-02-19 17:47:57|   GPU8  55C  Sol/s: 751.9  Sol/W: 2.76  Avg: 754.9  I/s: 404.9  Sh: 0.54   1.00 187
    2018-02-19 17:47:59|   GPU9  62C  Sol/s: 769.0  Sol/W: 2.56  Avg: 759.6  I/s: 406.4  Sh: 0.91   1.00 188
    2018-02-19 17:47:59|   ========== Sol/s: 7050.1 Sol/W: 2.65  Avg: 7057.6 I/s: 3778.4 Sh: 3.99   1.00 184
    2018-02-19 17:48:04|   GPU0  53C  Sol/s: 693.4  Sol/W: 3.29  Avg: 698.6  I/s: 370.9  Sh: 0.17   1.00 172
    2018-02-19 17:48:05|   GPU1  54C  Sol/s: 370.9  Sol/W: 1.96  Avg: 370.2  I/s: 199.0  Sh: 0.00   . .
    2018-02-19 17:48:07|   GPU2  69C  Sol/s: 748.8  Sol/W: 2.56  Avg: 755.2  I/s: 405.2  Sh: 0.51   1.00 187
    2018-02-19 17:48:09|   GPU3  65C  Sol/s: 742.9  Sol/W: 2.70  Avg: 742.6  I/s: 398.2  Sh: 0.17   1.00 188
    2018-02-19 17:48:10|   GPU4  66C  Sol/s: 753.4  Sol/W: 2.71  Avg: 759.3  I/s: 405.8  Sh: 0.34   1.00 188
    2018-02-19 17:48:13|>  GPU5  61C  Sol/s: 745.9  Sol/W: 2.60  Avg: 759.6  I/s: 408.4  Sh: 0.68   1.00 187
    2018-02-19 17:48:15|>  GPU6  66C  Sol/s: 701.3  Sol/W: 2.83  Avg: 695.1  I/s: 373.0  Sh: 0.34   1.00 172
    2018-02-19 17:48:16|>  GPU7  57C  Sol/s: 759.3  Sol/W: 2.50  Avg: 761.0  I/s: 406.9  Sh: 0.34   1.00 188 +
    2018-02-19 17:48:19|>  GPU8  55C  Sol/s: 758.9  Sol/W: 2.76  Avg: 755.1  I/s: 404.9  Sh: 0.51   1.00 187
    2018-02-19 17:48:21|>  GPU9  62C  Sol/s: 758.5  Sol/W: 2.56  Avg: 759.5  I/s: 406.1  Sh: 0.85   1.00 188
    2018-02-19 17:48:21|   ========== Sol/s: 7033.5 Sol/W: 2.65  Avg: 7056.1 I/s: 3778.3 Sh: 3.92   1.00 184


    Hash will drop one one card in my rigs whenever I'm connected via an app remotely in Windows 10.  Not sure if this is the same scenario you're seeing.

  • korenchkin
    Newbie
    *
    Offline Offline

    Activity: 11
    Merit: 0


    View Profile
    February 19, 2018, 07:12:16 PM
     #2666
    try gpuz,what it says in perfcap reason...

  • wetblanket
    Jr. Member
    *
    Offline Offline

    Activity: 95
    Merit: 2


    View Profile
    February 19, 2018, 08:42:11 PM
     #2667
    Quote from: crypto4pizza on February 19, 2018, 05:52:57 PM
    Quote from: Shodo on February 19, 2018, 02:28:43 PM
    Can someone please explain me one thing.
    When I run DSTM or EWBF I have one card that starts ok but then goes down very fast to 1/2 hashrate.
    NVIDIA Inspector shows very small (about 30-40%) usage of MCU on that card.
    If I run ccminer (any algo) - all is fine, all cards are equal. So it seems to me that this is an equihash issue.
    Please check card 1. Sometimes it shows shares like .. That card is totally equal with 7.8.9 GPUs, so it must give 750 h/s

    Defective card?

    2018-02-19 17:47:37|   ========== Sol/s: 7020.9 Sol/W: 2.65  Avg: 7058.2 I/s: 3777.9 Sh: 3.89   1.00 184
    2018-02-19 17:47:42|   GPU0  53C  Sol/s: 700.6  Sol/W: 3.29  Avg: 698.9  I/s: 370.6  Sh: 0.18   1.00 172
    2018-02-19 17:47:43|   GPU1  53C  Sol/s: 371.2  Sol/W: 1.96  Avg: 370.1  I/s: 199.0  Sh: 0.00   . .
    2018-02-19 17:47:45|   GPU2  68C  Sol/s: 756.9  Sol/W: 2.57  Avg: 755.6  I/s: 405.2  Sh: 0.54   1.00 187 +
    2018-02-19 17:47:47|   GPU3  64C  Sol/s: 735.8  Sol/W: 2.70  Avg: 742.6  I/s: 398.2  Sh: 0.18   1.00 188
    2018-02-19 17:47:48|   GPU4  66C  Sol/s: 761.2  Sol/W: 2.71  Avg: 759.7  I/s: 405.8  Sh: 0.36   1.00 188 +
    2018-02-19 17:47:50|   GPU5  61C  Sol/s: 754.7  Sol/W: 2.61  Avg: 760.5  I/s: 408.4  Sh: 0.73   1.00 187
    2018-02-19 17:47:53|   GPU6  66C  Sol/s: 690.1  Sol/W: 2.83  Avg: 694.7  I/s: 372.7  Sh: 0.36   1.00 172
    2018-02-19 17:47:54|   GPU7  56C  Sol/s: 758.7  Sol/W: 2.50  Avg: 761.1  I/s: 407.2  Sh: 0.18   1.00 187
    2018-02-19 17:47:57|   GPU8  55C  Sol/s: 751.9  Sol/W: 2.76  Avg: 754.9  I/s: 404.9  Sh: 0.54   1.00 187
    2018-02-19 17:47:59|   GPU9  62C  Sol/s: 769.0  Sol/W: 2.56  Avg: 759.6  I/s: 406.4  Sh: 0.91   1.00 188
    2018-02-19 17:47:59|   ========== Sol/s: 7050.1 Sol/W: 2.65  Avg: 7057.6 I/s: 3778.4 Sh: 3.99   1.00 184
    2018-02-19 17:48:04|   GPU0  53C  Sol/s: 693.4  Sol/W: 3.29  Avg: 698.6  I/s: 370.9  Sh: 0.17   1.00 172
    2018-02-19 17:48:05|   GPU1  54C  Sol/s: 370.9  Sol/W: 1.96  Avg: 370.2  I/s: 199.0  Sh: 0.00   . .
    2018-02-19 17:48:07|   GPU2  69C  Sol/s: 748.8  Sol/W: 2.56  Avg: 755.2  I/s: 405.2  Sh: 0.51   1.00 187
    2018-02-19 17:48:09|   GPU3  65C  Sol/s: 742.9  Sol/W: 2.70  Avg: 742.6  I/s: 398.2  Sh: 0.17   1.00 188
    2018-02-19 17:48:10|   GPU4  66C  Sol/s: 753.4  Sol/W: 2.71  Avg: 759.3  I/s: 405.8  Sh: 0.34   1.00 188
    2018-02-19 17:48:13|>  GPU5  61C  Sol/s: 745.9  Sol/W: 2.60  Avg: 759.6  I/s: 408.4  Sh: 0.68   1.00 187
    2018-02-19 17:48:15|>  GPU6  66C  Sol/s: 701.3  Sol/W: 2.83  Avg: 695.1  I/s: 373.0  Sh: 0.34   1.00 172
    2018-02-19 17:48:16|>  GPU7  57C  Sol/s: 759.3  Sol/W: 2.50  Avg: 761.0  I/s: 406.9  Sh: 0.34   1.00 188 +
    2018-02-19 17:48:19|>  GPU8  55C  Sol/s: 758.9  Sol/W: 2.76  Avg: 755.1  I/s: 404.9  Sh: 0.51   1.00 187
    2018-02-19 17:48:21|>  GPU9  62C  Sol/s: 758.5  Sol/W: 2.56  Avg: 759.5  I/s: 406.1  Sh: 0.85   1.00 188
    2018-02-19 17:48:21|   ========== Sol/s: 7033.5 Sol/W: 2.65  Avg: 7056.1 I/s: 3778.3 Sh: 3.92   1.00 184


    Hash will drop one one card in my rigs whenever I'm connected via an app remotely in Windows 10.  Not sure if this is the same scenario you're seeing.

    Sounds like it's pretty common? Maybe Remote Desktop uses the GPU itself as well. (see https://www.reddit.com/r/gpumining/comments/7eattb/mining_causes_poor_remote_desktop_teamviewer/)
    Improve mining pool share/hash rates with the aiostratum-proxy (https://bt.irlbtc.com/view/3179895) stratum mining proxy.

  • powermickel
    Newbie
    *
    Offline Offline

    Activity: 7
    Merit: 0


    View Profile
    February 19, 2018, 08:47:27 PM
     #2668
    Hi.
    Sorry for this Noob Question  Undecided but do this miner works on MPH to mine Classic too?

  • haraujo
    Newbie
    *
    Offline Offline

    Activity: 4
    Merit: 0


    View Profile
    February 19, 2018, 09:07:18 PM
     #2669
    Hello guys,
    I have a question.

    If I use DSTM in NICEHASH, do I need to pay:

    dstm's ZCash Cuda miner:
    Contains 2% devfee.
    Nicehash:
    2% internal wallet fee

    = 4%?

  • Pustul
    Sr. Member
    ****
    Offline Offline

    Activity: 350
    Merit: 250



    View Profile
    February 19, 2018, 09:46:59 PM
     #2670
    How can I monitor my rigs with this miner? Is there some free software or maybe a web page that I can setup to aggregate all my rigs in one place? Telemetry is nice but I would like to have the same basic thing with all my rigs in one page.
     

  • NameTaken
    Hero Member
    *****
    Offline Offline

    Activity: 630
    Merit: 502


    View Profile
    February 19, 2018, 09:52:34 PM
     #2671
    Quote from: Pustul on February 19, 2018, 09:46:59 PM
    How can I monitor my rigs with this miner? Is there some free software or maybe a web page that I can setup to aggregate all my rigs in one place? Telemetry is nice but I would like to have the same basic thing with all my rigs in one page.
     
    I point my rigs at miningrigrentals.com as a free hosted proxy service with backup pool support, easy pool switching without have to edit each individual rig's config and overview dashboard.

    Quote
    You never required to list your rig for rent. There is no fee to use our site/service for the miner controls or hash rate graphs.

  • Dr.Cupido
    Newbie
    *
    Offline Offline

    Activity: 21
    Merit: 0


    View Profile
    February 19, 2018, 10:03:09 PM
     #2672
    Quote from: vuquanict on February 19, 2018, 06:43:34 AM
    Quote from: alltero on February 17, 2018, 07:43:17 PM
    Quote from: promomei on February 16, 2018, 01:36:06 PM
    Quote from: akuci on February 16, 2018, 01:11:43 PM
    Quote from: neekir on February 16, 2018, 12:58:40 PM
    This is the result , I am getting in 1070 and 1060 6GB

    GPU0  66C  Sol/s: 453.4  Sol/W: 3.80  Avg: 458.3  I/s: 243.3  Sh: 1.99   1.00 297 +
    >  GPU1  66C  Sol/s: 336.7  Sol/W: 3.07  Avg: 339.8  I/s: 180.5  Sh: 0.99   1.00 268
    >  GPU2  62C  Sol/s: 347.1  Sol/W: 3.12  Avg: 343.6  I/s: 182.7  Sh: 4.98   1.00 266 +

    1060 3GB (hynix)

       GPU0  77C  Sol/s: 262.5  Sol/W: 3.39  Avg: 278.6  I/s: 139.6  Sh: 1.79   1.00 250
       GPU1  77C  Sol/s: 277.9  Sol/W: 3.23  Avg: 289.5  I/s: 150.5  Sh: 0.30   1.00 238
       GPU2  77C  Sol/s: 273.7  Sol/W: 3.29  Avg: 287.9  I/s: 145.5  Sh: 1.19   1.00 235
       GPU3  77C  Sol/s: 252.5  Sol/W: 3.46  Avg: 272.2  I/s: 133.4  Sh: 0.30   1.00 234
       GPU4  77C  Sol/s: 262.1  Sol/W: 3.36  Avg: 278.7  I/s: 142.5  Sh: 1.19   1.00 235
       GPU5  77C  Sol/s: 279.1  Sol/W: 3.28  Avg: 289.4  I/s: 150.0  Sh: 1.49   1.00 247
       GPU6  77C  Sol/s: 276.3  Sol/W: 3.19  Avg: 287.5  I/s: 149.1  Sh: 0.30   1.00 247
       ========== Sol/s: 1884.1 Sol/W: 3.31  Avg: 1983.9 I/s: 1010.4 Sh: 6.57   1.00 240
    Your 3GB 1060s are WAY TO HOT for 24\7. Where are you keeping them?
    Also your results are too low for a 3GB 1060, something is very wrong with your setup.

    blame hynix memory

    1060  Hynix memory  DSTM 6.0
    https://www.screencast.com/t/7LXoo6y282
    Hi. What is your driver version?
    I have 1060 3gb like yours. When i start zm. Hashrate is 310 sol. Then (after 1-2h) the hashrate will decrease to 260-270

    Over 60° the cards start to throttle. Only 1-5 %. At 70° they throttle even more. Keep below 60° to get Full Power. Thats my experience with 3 setups with 1060 3/6GB, 1070TI and 1080TI.
    And thats why your hashrate goes down after a while, cause VRMs/GPU and MEM is hot and the card slowy begin to throttle.

    My setup after hours of mining:

    ID   DEVICE NAME          °C   ∅ Sol/s   ∅ Sol/W   ∅ Watt
    0   GeForce GTX 1080 Ti    50   652.34   4.11   158.67
    1   GeForce GTX 1060 3G   50   277.33   3.86   71.92   
    2   GeForce GTX 1070 Ti    52   491.61   4.58   107.23
    3   GeForce GTX 1060 3G   49   274.56   3.83   71.74   
    4   GeForce GTX 1060 3G   54   274.18   3.82   71.71   
    5   GeForce GTX 1070 Ti    46   492.15   4.58   107.49
    6   GeForce GTX 1060 3G   54   277.34   3.87   71.68   
    Total   -                              2739.51   4.09   660.44   

    The ambient temperature is 12° (thx winter)

    Im using Win7 and the cards have these settings:

    GTX 1060 3GB hynix: GPU +240 MEM +400 PL 60%
    GTX 1070 TI : GPU +180 MEM +600 PL 60%
    GTX 1080 TI : GPU +160 MEM -100 PL 60%

    Theres a little room for stability. 1080 Ti runs since 1 year 24/7 with these settings without hassle. I prefer a rock stable system.
    In a downtime you are losing money. So a little lower performance is okay for me.

  • Dr.Cupido
    Newbie
    *
    Offline Offline

    Activity: 21
    Merit: 0


    View Profile
    February 19, 2018, 10:12:36 PM
     #2673
    Quote from: Pustul on February 19, 2018, 09:46:59 PM
    How can I monitor my rigs with this miner? Is there some free software or maybe a web page that I can setup to aggregate all my rigs in one place? Telemetry is nice but I would like to have the same basic thing with all my rigs in one page.
     

    The easy and fast way. Make a html file and paste this. edit ip settings and ur done
    Code:
    <html>
    <head>
    <title>Mining stats</title>
    <meta>
    </head>
    <frameset rows="50%,50%">
      <frameset cols="50%,50%">
        <frame src="http://172.20.10.80:2222/">
        <frame src="http://172.20.10.99:2222/">
      </frameset>
      <frameset cols="50%,50%">
        <frame src="http://172.20.10.90:2222/">
        <frame src="http://172.20.10.89:2222/">
      </frameset>
    </frameset>
    </html>

  • maz_atenzamin
    Newbie
    *
    Offline Offline

    Activity: 6
    Merit: 0


    View Profile
    February 19, 2018, 10:46:47 PM
     #2674
    Quote from: maz_atenzamin on February 18, 2018, 04:46:20 PM
    Hi guys

    quick question about <accepted shares ratio> <network latency in ms>

    I have 2 rigs using DSTM on nicehash equihash

    1st question, why my accepted shares ratio is 1.00 on one rig and my second rig is always under 1.00
    2nd question is latency 125 on nicehash usa normal?
    3rd one im also getting share above target once a while, why?

    Rig1
    https://gyazo.com/52243ff8fc874c5097d35133ce5e81c0

    Rig2
    https://gyazo.com/4280a16fca0fcef1556a01d7594db706

    thanks
    maz

    can somebody help me here please?

  • anotherwave
    Newbie
    *
    Offline Offline

    Activity: 39
    Merit: 0


    View Profile
    February 19, 2018, 11:19:48 PM
     #2675
    Quote from: haraujo on February 19, 2018, 09:07:18 PM
    Hello guys,
    I have a question.

    If I use DSTM in NICEHASH, do I need to pay:

    dstm's ZCash Cuda miner:
    Contains 2% devfee.
    Nicehash:
    2% internal wallet fee

    = 4%?


    You don't have to do anything they've already paid themselves.... lol.. but ya those are the fees.. i think nicehash takes more than just %2.. i think its %2 just to deposit into their wallet and then they charge again for a withdrawal i think.. Really you should steer clear of nicehash and use your own wallet and use whattomine to see whats the most profitable for your card/cards..

  • anotherwave
    Newbie
    *
    Offline Offline

    Activity: 39
    Merit: 0


    View Profile
    February 19, 2018, 11:24:55 PM
     #2676
    Quote from: maz_atenzamin on February 19, 2018, 10:46:47 PM
    Quote from: maz_atenzamin on February 18, 2018, 04:46:20 PM
    Hi guys

    quick question about <accepted shares ratio> <network latency in ms>

    I have 2 rigs using DSTM on nicehash equihash

    1st question, why my accepted shares ratio is 1.00 on one rig and my second rig is always under 1.00
    2nd question is latency 125 on nicehash usa normal?
    3rd one im also getting share above target once a while, why?

    Rig1
    https://gyazo.com/52243ff8fc874c5097d35133ce5e81c0

    Rig2
    https://gyazo.com/4280a16fca0fcef1556a01d7594db706

    thanks
    maz

    1. shares ratio will sometimes be under 1.00 when you have a rejected share.. .99 is not a prob. if its worse than that maybe one of your cards is overclocked a little to much and is producing rejected shares from time to time.

    2 i'm not sure about the ping it all depends where you live and your internet connection but 125ms isn't to bad

    3. i don't know what you mean by share above target?

  • anotherwave
    Newbie
    *
    Offline Offline

    Activity: 39
    Merit: 0


    View Profile
    February 19, 2018, 11:31:01 PM
     #2677
    Quote from: powermickel on February 19, 2018, 08:47:27 PM
    Hi.
    Sorry for this Noob Question  Undecided but do this miner works on MPH to mine Classic too?

    Classic what? zclassic?  then yes.  This is a equihash miner so it will mine any coin based on the equihash algorithm no matter what pool its on in general..

  • haraujo
    Newbie
    *
    Offline Offline

    Activity: 4
    Merit: 0


    View Profile
    February 19, 2018, 11:39:55 PM
     #2678
    Quote from: anotherwave on February 19, 2018, 11:19:48 PM
    Quote from: haraujo on February 19, 2018, 09:07:18 PM
    Hello guys,
    I have a question.

    If I use DSTM in NICEHASH, do I need to pay:

    dstm's ZCash Cuda miner:
    Contains 2% devfee.
    Nicehash:
    2% internal wallet fee

    = 4%?


    You don't have to do anything they've already paid themselves.... lol.. but ya those are the fees.. i think nicehash takes more than just %2.. i think its %2 just to deposit into their wallet and then they charge again for a withdrawal i think.. Really you should steer clear of nicehash and use your own wallet and use whattomine to see whats the most profitable for your card/cards..

    Do you recommend any pool to equihash? For my GPU the best at this moment is EQUIHASH.

  • Pustul
    Sr. Member
    ****
    Offline Offline

    Activity: 350
    Merit: 250



    View Profile
    February 19, 2018, 11:57:22 PM
     #2679
    Quote from: NameTaken on February 19, 2018, 09:52:34 PM
    I point my rigs at miningrigrentals.com as a free hosted proxy service with backup pool support, easy pool switching without have to edit each individual rig's config and overview dashboard.

    Quote
    You never required to list your rig for rent. There is no fee to use our site/service for the miner controls or hash rate graphs.

    That's a great idea, thanks!

    Quote from: Dr.Cupido on February 19, 2018, 10:12:36 PM

    The easy and fast way. Make a html file and paste this. edit ip settings and ur done
    Code:
    <html>
    <head>
    <title>Mining stats</title>
    <meta>
    </head>
    <frameset rows="50%,50%">
      <frameset cols="50%,50%">
        <frame src="http://172.20.10.80:2222/">
        <frame src="http://172.20.10.99:2222/">
      </frameset>
      <frameset cols="50%,50%">
        <frame src="http://172.20.10.90:2222/">
        <frame src="http://172.20.10.89:2222/">
      </frameset>
    </frameset>
    </html>

    Not all my rigs are on the same LAN, but I like the idea

  • maz_atenzamin
    Newbie
    *
    Offline Offline

    Activity: 6
    Merit: 0


    View Profile
    February 20, 2018, 12:16:35 AM
     #2680
    Quote from: anotherwave on February 19, 2018, 11:24:55 PM
    Quote from: maz_atenzamin on February 19, 2018, 10:46:47 PM
    Quote from: maz_atenzamin on February 18, 2018, 04:46:20 PM
    Hi guys

    quick question about <accepted shares ratio> <network latency in ms>

    I have 2 rigs using DSTM on nicehash equihash

    1st question, why my accepted shares ratio is 1.00 on one rig and my second rig is always under 1.00
    2nd question is latency 125 on nicehash usa normal?
    3rd one im also getting share above target once a while, why?

    Rig1
    https://gyazo.com/52243ff8fc874c5097d35133ce5e81c0

    Rig2
    https://gyazo.com/4280a16fca0fcef1556a01d7594db706

    thanks
    maz

    1. shares ratio will sometimes be under 1.00 when you have a rejected share.. .99 is not a prob. if its worse than that maybe one of your cards is overclocked a little to much and is producing rejected shares from time to time.

    2 i'm not sure about the ping it all depends where you live and your internet connection but 125ms isn't to bad

    3. i don't know what you mean by share above target?




    thanks, share above target is one type of rejected shares reported by nicehash just like stale shares is another type
    Pages: « 1 ... 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 [134] 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 »
      Print  
Page 133
Viewing Page: 134

IRLBTC™ © 2025 IRLBTC.com