<<  >> (p.535)
    Author Topic: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.1  (Read 5806564 times)
    This is a self-moderated topic. If you do not want to be moderated by the person who started this topic, create a new topic. (3 posts by 1+ user deleted.)

    • sunblaster
    Full Member
    ***
    Offline Offline

    Activity: 126
    Merit: 100



    View Profile
    June 06, 2013, 02:28:53 AM
     #10681
    Has anyone got v3.2 to correctly detect ASICminer USBs on Windows? Keeps asking for "AMU driver" even though UART BRidge COM driver is installed and USBs are listed under COMP Ports. Also 3.1.1 doesn't seem to work with COM ports higher then 9, no matter what format I use in BAT file it just says failed to open port.

    Here is my .bat

    cgminer-nogpu -o http://pit.deepbit.net:8332 -u someuser -p somepassword --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S COM3 -S COM4 -S COM5 -S COM6 -S COM7 -S COM8 -S COM9    

    if i try "-S COM10" or any other higher ports I get: Icarus detect: Failed to open PORT 10

    I gave up and started using BitMinter

    SunBlaster

  • sunblaster
    Full Member
    ***
    Offline Offline

    Activity: 126
    Merit: 100



    View Profile
    June 06, 2013, 02:51:56 AM
     #10682
    Quote from: af_newbie on June 06, 2013, 02:40:07 AM
    Quote from: sunblaster on June 06, 2013, 02:28:53 AM
    Has anyone got v3.2 to correctly detect ASICminer USBs on Windows? Keeps asking for "AMU driver" even though UART BRidge COM driver is installed and USBs are listed under COMP Ports. Also 3.1.1 doesn't seem to work with COM ports higher then 9, no matter what format I use in BAT file it just says failed to open port.

    Here is my .bat

    cgminer-nogpu -o http://pit.deepbit.net:8332 -u someuser -p somepassword --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S COM3 -S COM4 -S COM5 -S COM6 -S COM7 -S COM8 -S COM9    

    if i try "-S COM10" or any other higher ports I get: Icarus detect: Failed to open PORT 10

    I gave up and started using BitMinter

    SunBlaster



    Use -S \\.\COM10 on the command line or "scan-serial" : [ "icarus:\\\\.\\COM10"] in the config file

    3.2.0 uses direct USB so you have to set that up, 3.1.1 uses silabs USB/COM driver. 3.2.0 has issues.  So use 3.1.1, or use bfgminer.

    ok great, -S \\.\COM10 seems to work.

  • daemon
    Newbie
    *
    Offline Offline

    Activity: 28
    Merit: 0


    View Profile
    June 06, 2013, 05:43:20 AM
     #10683
    In my previous post I described the problem.
    This problem occurs stably on three computers at intervals of approximately 15 minutes.
    cgminer 3.2.0
    Now, for reasons of clarity, cgminer was started with the - disable-gpu

    Here I found the instructions to provide more information about the problem.
    The following information from the bt full command:

    Quote
    (gdb) bt full
    #0  0x00007f0db0aa6e90 in ?? () fromlib/libusb-1.0.so.0
    No symbol table info available.
    #1  0x00007f0db0aa8408 in ?? () fromlib/libusb-1.0.so.0
    No symbol table info available.
    #2  0x00007f0db0aa65bb in ?? () fromlib/libusb-1.0.so.0
    No symbol table info available.
    #3  0x00007f0db0aa6d73 in libusb_handle_events_timeout () fromlib/libusb-1.0.so.0
    No symbol table info available.
    #4  0x00007f0db0aa6e0d in libusb_handle_events () fromlib/libusb-1.0.so.0
    No symbol table info available.
    #5  0x00007f0db0aa7395 in ?? () fromlib/libusb-1.0.so.0
    No symbol table info available.
    #6  0x00007f0db0aa74b4 in libusb_bulk_transfer () fromlib/libusb-1.0.so.0
    No symbol table info available.
    #7  0x0000000000434014 in _usb_read (cgpu=0x10c76c0, ep=<value optimized out>, buf=<value optimized out>, bufsiz=<value optimized out>, processed=<value optimized out>, timeout=<value optimized out>, end=0x0, cmd=C_GETRESULTS,
        readonce=false) at usbutils.c:2129
            usbdev = 0x10c32f0
            ftdi = true
            tv_start = {tv_sec = 1370496429, tv_usec = 1878}
            read_start = {tv_sec = 1370496429, tv_usec = 1878}
            tv_finish = {tv_sec = 1370496429, tv_usec = 1877}
            max = 0.10000000000000001
            done = <value optimized out>
            bufleft = <value optimized out>
            err = <value optimized out>
            got = 0
            tot = 0
            first = <value optimized out>
            search = <value optimized out>
            endlen = <value optimized out>
            usbbuf = "\001`\000\362\000\362", '\000' <repeats 5138 times>, "@P\022\252\r\177", '\000' <repeats 58 times>"\200, P\022\252\r\177", '\000' <repeats 18 times>"\240, R\022\252\r\177\000\000`Y\022\252\r\177\000\000\230\377\377\377\377\377\377\377", '\000' <repeats 16 times>, "S\376+\260\r\177\000\000\000\000\000\000\000\000\000\000@R\022\252\r\177\000\000\340R\022\252\r\177\000\000\240Y\022\252\r\177\000\000\230\377\377\377\377\377\377\377XP\022\252\r\177\000\000\000\000\000\000\000\000\000\000S\376+\260\r\177\000\000\063\000\000\000.\000\000\000\240X\022\252\r\177\000\000\062\064.9\r\177\000\000A\375+\260\r\177\000\000\000\000\000\000\000\000\000\310\000\000\000\000\000\000\000\000\065\000\000\000\065\000\000\000\062\000\000\000\064\000\000\000.\000\000\000\071\000\000\000T\003,\260\r\177", '\000' <repeats 25 times>"\240"...
            ptr = 0x7f0daa123b40 "\001`"
            usbbufread = 8192
    #8  0x0000000000436073 in icarus_get_nonce (icarus=0x10c76c0, buf=0x7f0daa125d20 "", tv_start=<value optimized out>, tv_finish=<value optimized out>, thr=0x10cebe0, read_time=<value optimized out>) at driver-icarus.c:423
            read_start = {tv_sec = 1370496429, tv_usec = 1878}
            read_finish = {tv_sec = 1370496429, tv_usec = 1877}
            err = <value optimized out>
            amt = 0
            rc = 5108
            read_amount = 0
            first = true
    #9  0x00000000004363bc in icarus_scanhash (thr=0x10cebe0, work=0x10f5ee0, max_nonce=<value optimized out>) at driver-icarus.c:923
            icarus = 0x10c76c0
            ret = <value optimized out>
            err = 0
            amount = 64
            ob_bin = "\200\316\372 \277\017\252o\240}L\b7?,\377\233ʵ3\256\321+\217\004\370\341\333PĐ\367", '\000' <repeats 20 times>, "7\023\001\032\251\035\260Q6\322\030", <incomplete sequence \370>
            nonce_bin = "\000\000\000"
            ob_hex = <value optimized out>
            hash_count = <value optimized out>
            tv_start = {tv_sec = 1370496423, tv_usec = 854044}
            tv_finish = {tv_sec = 1370496429, tv_usec = 1877}
            tv_history_start = {tv_sec = 0, tv_usec = 17624032}
            tv_history_finish = {tv_sec = 0, tv_usec = -10485688}
            Ti = <value optimized out>
            Xi = <value optimized out>
            curr_hw_errors = 0
            i = <value optimized out>
            history0 = <value optimized out>

  • Lucko
    Hero Member
    *****
    Offline Offline

    Activity: 826
    Merit: 1000



    View Profile
    June 06, 2013, 08:46:22 AM
     #10684
    Quote from: mdude77 on June 06, 2013, 12:29:25 AM
    Quote from: Lucko on June 05, 2013, 11:14:27 AM
    Quote from: mdude77 on June 05, 2013, 09:56:03 AM
    Quote from: bitpop on June 05, 2013, 04:53:42 AM
    You should merged mine btc, nmc, ixc and dvc.

    You can only do that with p2pool right?

    M
    Nope... http://mmpool.bitparking.com/pool

    https://bt.irlbtc.com/view/57148.msg2365557#msg2365557

    True.  That's not what I meant.  Fortunately bitminter does BTC and NMC.. and IXC is worthless and DVC is completely worthless.

    M
    Than I don't get it... Are you saying that Bitparking is p2pool? It is not. And I don't agree on worthless part. You do get a lot of them and if you are selling smart you get up to 50% of NMC value... But then again NMC could be also be called worthless... But as long as I get something I see it as bonus.

  • bitpop
    Legendary
    *
    Offline Offline

    Activity: 2954
    Merit: 1065



    View Profile WWW
    June 06, 2013, 09:53:17 AM
     #10685
    P2pool does not equal merged mining, it's an option. Slush used to give nmc. I've moved to p2pool when he stopped.
    Reputation

  • -ck (OP)
    Legendary
    *
    Offline Offline

    Activity: 4578
    Merit: 1695


    Ruu \o/


    View Profile WWW
    June 06, 2013, 09:57:10 AM
     #10686
    Quote from: daemon on June 06, 2013, 05:43:20 AM
    In my previous post I described the problem.
    This problem occurs stably on three computers at intervals of approximately 15 minutes.
    cgminer 3.2.0
    Now, for reasons of clarity, cgminer was started with the - disable-gpu

    Here I found the instructions to provide more information about the problem.
    The following information from the bt full command:
    Thanks for that. It's hard to know if it's crashing in libusb due to a libusb bug or we're calling a libusb function with invalid parameters. I'm inclined to always blame our code first to keep looking for a bug since our code is under very heavy development. We're revamping that section of code somewhat and hopefully indirectly address it.
    Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel
    2% Fee Solo mining at solo.ckpool.org
    -ck

  • joae1975
    Hero Member
    *****
    Offline Offline

    Activity: 752
    Merit: 500



    View Profile
    June 06, 2013, 12:06:44 PM
     #10687
    Noob here. I have a new/used Asus on Windows 7.  Trying to ruin cgminer-nogpu.  Plain Cgminer won't run. 

    cgminer gives me an error saying:

    "The program can't start because OpenCL.dll is missing from your computer.  Try reinstalling the program to fix this problem."

    When I run cgminer-nogpu it says:



    I tried to follow all the other thread's instructions.  All the read me files.  Some things didn't make any sense to me, couldn't do what they were saying.  What does all this mean above?  Obviously I need to install a driver or fix something.  What should I do?  Can someone give me a user friendly instructions link?  Thanks!!
    1PewuG8KZJUPK3CtvAkAs1Uw42rQgUv5Jk

  • bitpop
    Legendary
    *
    Offline Offline

    Activity: 2954
    Merit: 1065



    View Profile WWW
    June 06, 2013, 12:23:58 PM
     #10688
    I posted instructions earlier. You'll know when you succeeded when your com ports disappear
    Reputation

  • joae1975
    Hero Member
    *****
    Offline Offline

    Activity: 752
    Merit: 500



    View Profile
    June 06, 2013, 12:44:49 PM
     #10689
    Quote from: bitpop on June 06, 2013, 12:23:58 PM
    I posted instructions earlier. You'll know when you succeeded when your com ports disappear
    Earlier?  This thread has 540 pages, a little help?
    1PewuG8KZJUPK3CtvAkAs1Uw42rQgUv5Jk

  • bitpop
    Legendary
    *
    Offline Offline

    Activity: 2954
    Merit: 1065



    View Profile WWW
    June 06, 2013, 12:52:01 PM
     #10690
    https://bt.irlbtc.com/view/28402.msg2328370#msg2328370
    Reputation

  • joae1975
    Hero Member
    *****
    Offline Offline

    Activity: 752
    Merit: 500



    View Profile
    June 06, 2013, 02:31:28 PM
     #10691
    Quote from: bitpop on June 06, 2013, 12:52:01 PM
    https://bt.irlbtc.com/view/28402.msg2328370#msg2328370
    Using cgminer on windows 7

    Drivers installed with zadig as described and can view in device manager

    I set up a .bat file and I when I try to run it, it flashes on the screen and automatically closes. Says "-S unrecognized option" Any ideas why?  I unchecked "hide extensions for all file types" as instructed when creating a .bat file.

    My text in the bat file reads as follows: (replacing user/pass with xxx/yyy)

    C:\cgminer\cgminer-nogpu.exe -o http://rr.btcmp.com:8332 -u xxx -p yyy d --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S/./COM3

    The pathway is correct.  Can anyone see any problems?  Only 1 miner plugged into usb port. Thanks!
    1PewuG8KZJUPK3CtvAkAs1Uw42rQgUv5Jk

  • twmz
    Hero Member
    *****
    Offline Offline

    Activity: 737
    Merit: 500



    View Profile
    June 06, 2013, 02:33:57 PM
     #10692
    Quote from: joae1975 on June 06, 2013, 02:31:28 PM
    Quote from: bitpop on June 06, 2013, 12:52:01 PM
    https://bt.irlbtc.com/view/28402.msg2328370#msg2328370
    Using cgminer on windows 7

    Drivers installed with zadig as described and can view in device manager

    I set up a .bat file and I when I try to run it, it flashes on the screen and automatically closes. Says "-S unrecognized option" Any ideas why?  I unchecked "hide extensions for all file types" as instructed when creating a .bat file.

    My text in the bat file reads as follows: (replacing user/pass with xxx/yyy)

    C:\cgminer\cgminer-nogpu.exe -o http://rr.btcmp.com:8332 -u xxx -p yyy d --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S/./COM3

    The pathway is correct.  Can anyone see any problems?  Only 1 miner plugged into usb port. Thanks!

    The command line you posted is for the 3.1.1 version of cgminer (which does not use zadig).  The 3.2 version of cgminer does not need --icarus-options --icarus-timing or -S.

    Also, the 3.2 version often doesn't work for asicminer USB devices.  The issue is under investigation.  The most reliable way to get this working is to use the older 3.1.1 version of cgminer with the command line you posted above.
    Was I helpful?  1TwmzX1wBxNF2qtAJRhdKmi2WyLZ5VHRs
    WoT, GPG

    Bitrated user: ewal.

  • joae1975
    Hero Member
    *****
    Offline Offline

    Activity: 752
    Merit: 500



    View Profile
    June 06, 2013, 02:56:05 PM
     #10693
    Quote from: af_newbie on June 06, 2013, 02:36:28 PM
    Quote from: joae1975 on June 06, 2013, 02:31:28 PM
    Quote from: bitpop on June 06, 2013, 12:52:01 PM
    https://bt.irlbtc.com/view/28402.msg2328370#msg2328370
    Using cgminer on windows 7

    Drivers installed with zadig as described and can view in device manager

    I set up a .bat file and I when I try to run it, it flashes on the screen and automatically closes. Says "-S unrecognized option" Any ideas why?  I unchecked "hide extensions for all file types" as instructed when creating a .bat file.

    My text in the bat file reads as follows: (replacing user/pass with xxx/yyy)

    C:\cgminer\cgminer-nogpu.exe -o http://rr.btcmp.com:8332 -u xxx -p yyy d --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S/./COM3

    The pathway is correct.  Can anyone see any problems?  Only 1 miner plugged into usb port. Thanks!

    Use version 3.1.1 for Icarus/Lancelot/Erupter devices.  I thought it suppose to be -S \\.\COM3

    Tried v3.1.1, tried & \ both ways.  Still same thing.

    In addition.  When I start cgminer-nogpu.exe manually, enter my pool/user/pass...  It says this:



    Any help?
    1PewuG8KZJUPK3CtvAkAs1Uw42rQgUv5Jk

  • turtle83
    Sr. Member
    ****
    Offline Offline

    Activity: 322
    Merit: 250


    Supersonic


    View Profile WWW
    June 06, 2013, 03:02:29 PM
     #10694
    Quote from: joae1975 on June 06, 2013, 02:56:05 PM
    Quote from: af_newbie on June 06, 2013, 02:36:28 PM
    Quote from: joae1975 on June 06, 2013, 02:31:28 PM
    Quote from: bitpop on June 06, 2013, 12:52:01 PM
    https://bt.irlbtc.com/view/28402.msg2328370#msg2328370
    Using cgminer on windows 7

    Drivers installed with zadig as described and can view in device manager

    I set up a .bat file and I when I try to run it, it flashes on the screen and automatically closes. Says "-S unrecognized option" Any ideas why?  I unchecked "hide extensions for all file types" as instructed when creating a .bat file.

    My text in the bat file reads as follows: (replacing user/pass with xxx/yyy)

    C:\cgminer\cgminer-nogpu.exe -o http://rr.btcmp.com:8332 -u xxx -p yyy d --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S/./COM3

    The pathway is correct.  Can anyone see any problems?  Only 1 miner plugged into usb port. Thanks!

    Use version 3.1.1 for Icarus/Lancelot/Erupter devices.  I thought it suppose to be -S \\.\COM3

    Tried v3.1.1, tried & \ both ways.  Still same thing.

    In addition.  When I start cgminer-nogpu.exe manually, enter my pool/user/pass...  It says this:

    http://db.tt/5LSsuujs

    Any help?

    if u used 3.2.0 and then tried to go back to 3.1.1 , make sure u unplug and re-plug the device . atleast on linux you have to...
    FPGA/ASIC only: Raspberry pi packages for cgminer | Ubuntu PPA for mining related software

  • twmz
    Hero Member
    *****
    Offline Offline

    Activity: 737
    Merit: 500



    View Profile
    June 06, 2013, 03:18:32 PM
     #10695
    Quote from: turtle83 on June 06, 2013, 03:02:29 PM
    Quote from: joae1975 on June 06, 2013, 02:56:05 PM
    Quote from: af_newbie on June 06, 2013, 02:36:28 PM
    Quote from: joae1975 on June 06, 2013, 02:31:28 PM
    Quote from: bitpop on June 06, 2013, 12:52:01 PM
    https://bt.irlbtc.com/view/28402.msg2328370#msg2328370
    Using cgminer on windows 7

    Drivers installed with zadig as described and can view in device manager

    I set up a .bat file and I when I try to run it, it flashes on the screen and automatically closes. Says "-S unrecognized option" Any ideas why?  I unchecked "hide extensions for all file types" as instructed when creating a .bat file.

    My text in the bat file reads as follows: (replacing user/pass with xxx/yyy)

    C:\cgminer\cgminer-nogpu.exe -o http://rr.btcmp.com:8332 -u xxx -p yyy d --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S/./COM3

    The pathway is correct.  Can anyone see any problems?  Only 1 miner plugged into usb port. Thanks!

    Use version 3.1.1 for Icarus/Lancelot/Erupter devices.  I thought it suppose to be -S \\.\COM3

    Tried v3.1.1, tried & \ both ways.  Still same thing.

    In addition.  When I start cgminer-nogpu.exe manually, enter my pool/user/pass...  It says this:

    http://db.tt/5LSsuujs

    Any help?

    if u used 3.2.0 and then tried to go back to 3.1.1 , make sure u unplug and re-plug the device . atleast on linux you have to...

    You probably also have to undo whatever zadig did in order to use 3.1.1 after having set everything up for 3.2.0.  I use linux, so I can't tell you for sure what those steps are.
    Was I helpful?  1TwmzX1wBxNF2qtAJRhdKmi2WyLZ5VHRs
    WoT, GPG

    Bitrated user: ewal.

  • joae1975
    Hero Member
    *****
    Offline Offline

    Activity: 752
    Merit: 500



    View Profile
    June 06, 2013, 03:40:22 PM
     #10696
    Quote from: af_newbie on June 06, 2013, 03:21:40 PM

    +1.  Need to reinstall silabs drivers for 3.1.1 or bfgminer.
    I'm just going to go with a different miner software.  Can't get it to work.  Thanks guys for trying.
    1PewuG8KZJUPK3CtvAkAs1Uw42rQgUv5Jk

  • Trongersoll
    Hero Member
    *****
    Offline Offline

    Activity: 490
    Merit: 501



    View Profile
    June 06, 2013, 07:19:33 PM
    Last edit: June 06, 2013, 07:42:41 PM by Trongersoll
     #10697
    *sniff* *sniff* ok, i need some hand holding. I grabbed the tarball from GIT for the latest version. I copied the files into my cgminer directory (this is 32 bit Ubuntu), over writing the existing files. I ran autogen.sh and then make. I plugged in an ASICminer USB stick. the green light is on. then i ran ./cgminer with no parameters. It started GPU mining fine, but didn't show anything about the ASICminer. Do i need to reboot with the USB stick plugged in? or is there a start parameter that i need? Please don't tell me to read the readmes, i did. and i'm terrible at searching 100s of pages of a thread. I did the group join thing in the Readme.

  • Lucko
    Hero Member
    *****
    Offline Offline

    Activity: 826
    Merit: 1000



    View Profile
    June 06, 2013, 07:30:42 PM
     #10698
    Quote from: Trongersoll on June 06, 2013, 07:19:33 PM
    *sniff* *sniff* ok, i need some hand holding. I grabbed the tarball from GIT for the latest version. I copied the files into my cgminer directory (this is 32 bit Ubuntu), over writing the existing files. I ran autogen.sh and then make. I plugged in an ASICminer USB stick. the green light is on. then i ran ./cgminer with no parameters. It started GPU mining fine, but didn't show anything about the ASICminer. Do i need to reboot with the USB stick plugged in? or is there a start parameter that i need? Please don't tell me to read the readmes, i did. and i'm terrible at searching 100s of pages of a thread.
    Cgminer version? 3.2.0 has some problems... Windows parameters are  -S \\.\COM"X" ("X" beeing number of com port) for 3.1.1 not complitly sure about linux. I guess something likedev/"something"

    EDIT: I hope I pointed you in the right direction...

  • bitcoindaddy
    Hero Member
    *****
    Offline Offline

    Activity: 481
    Merit: 500


    View Profile
    June 06, 2013, 07:54:53 PM
     #10699
    Both 3.1.1 and 3.2.0 return this message:

    [2013-06-06 15:55:12] BitForceSC detect (2:9) get details returned nothing (0:0)

    What does this mean? Is the Jalapeno busted or am I missing something?


     [2013-06-06 15:58:55] Started cgminer 3.2.0
     [2013-06-06 15:58:55] Started cgminer 3.2.0
     [2013-06-06 15:58:55] USB all: found 16 devices - listing known devices
    .USB dev 0: Bus 2 Device 3 ID: 10c4:ea60
      Manufacturer: 'Silicon Labs'
      Product: 'CP2102 USB to UART Bridge Controller'
    .USB dev 1: Bus 2 Device 6 ID: 10c4:ea60
      Manufacturer: 'Silicon Labs'
      Product: 'CP2102 USB to UART Bridge Controller'
    .USB dev 2: Bus 2 Device 7 ID: 10c4:ea60
      Manufacturer: 'Silicon Labs'
      Product: 'CP2102 USB to UART Bridge Controller'
    .USB dev 3: Bus 2 Device 8 ID: 10c4:ea60
      Manufacturer: 'Silicon Labs'
      Product: 'CP2102 USB to UART Bridge Controller'
    .USB dev 4: Bus 2 Device 9 ID: 0403:6014
      Manufacturer: 'Butterfly Labs'
      Product: 'BitFORCE SHA256 SC'
     [2013-06-06 15:58:55] 5 known USB devices
     [2013-06-06 15:59:00] BitForceSC detect (2:9) get details returned nothing (0:0)
     [2013-06-06 15:59:00] Need to specify at least one pool server.
    Input server details.

  • turtle83
    Sr. Member
    ****
    Offline Offline

    Activity: 322
    Merit: 250


    Supersonic


    View Profile WWW
    June 06, 2013, 07:55:50 PM
     #10700
    Quote from: Trongersoll on June 06, 2013, 07:19:33 PM
    *sniff* *sniff* ok, i need some hand holding. I grabbed the tarball from GIT for the latest version. I copied the files into my cgminer directory (this is 32 bit Ubuntu), over writing the existing files. I ran autogen.sh and then make. I plugged in an ASICminer USB stick. the green light is on. then i ran ./cgminer with no parameters. It started GPU mining fine, but didn't show anything about the ASICminer. Do i need to reboot with the USB stick plugged in? or is there a start parameter that i need? Please don't tell me to read the readmes, i did. and i'm terrible at searching 100s of pages of a thread. I did the group join thing in the Readme.

    stop cgminer

    now unplug the USB thing
    plug in the usb thing back in.

    ^ Not troling. im serious.

    save this file https://github.com/ckolivas/cgminer/blob/master/01-cgminer.rules asetc/udev/rules.d/01-cgminer.rules

    sudo service udev restart

    download cgminer 3.1.1 (for sake of clarity into new directory)
    Code:
    ./autogen
    ./configure <the arguments u normally pass> --enable-icarus
    make


    lsdev/ttyUSB*
    make note of the devices.

    run cgminer
    Code:
    cgminer <arguments u normally use> --icarus-options 115200:1:1 --icarus-timing 3.0=100 -Sdev/ttyUSB0 -Sdev/ttyUSB1  <repeat for each usb tty device>
    FPGA/ASIC only: Raspberry pi packages for cgminer | Ubuntu PPA for mining related software
    Pages: « 1 ... 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 [535] 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 ... 843 »
      Print  
Page 534
Viewing Page: 535

IRLBTC™ © 2025 IRLBTC.com