Bitcointalk Mobile Browser presented by IRLBTC™

<< >> (p.553)

	Author	Topic: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.1 (Read 5806552 times)
This is a self-moderated topic. If you do not want to be moderated by the person who started this topic, create a new topic. (3 posts by 1+ user deleted.)

dwolfman

Full Member

Offline

Activity: 224
Merit: 100

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.2.2

June 18, 2013, 11:18:29 PM

#11041

Quote from: Moebius327 on June 18, 2013, 10:22:18 PM

Thanks!
Not using --auto-fan,
-I 1 no difference noticed compared to -I d
Isn't there a possibility to stop mining when the game is opened?

I've been using Bitcoin Miners in Tray to do that. See this thread: https://bt.irlbtc.com/view/149442.0

If the games are in Steam or can be opened through Steam, it makes it even easier. Just make sure GameOverlayUI is one of the processes it watches for and that you have Steam set up to use that when starting a game (so you have the Shift-Tab function for Steam community stuff).

Wanna send coins my way? 1BY2rZduB9j8Exa4158QXPFJoJ2NWU1NGf or just scan the QR code in my avatar. :-)

kano

Legendary

Offline

Activity: 4732
Merit: 1905

Linux since 1997 RedHat 4

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.2.2

June 18, 2013, 11:44:12 PM

#11042

Hmm ... although it's not hashing up full speed quite yet (and the numbers aren't reporting properly at the top) ... I realised that this screen grab I took was in fact the first ever view of an 8 BAS MiniRig mining on all 8 devices ... so I thought I'd post it even thought it's not hashing at full speed there ... (yeah the back screen shows all 8, not the front screen)

... and the fact that I know this is the first time also means that BFL clearly haven't been mining their own MiniRigs since there was no complete software combination that could do that even 24 hours ago ... the clock shown is KC time.

Soon it will be hashing at it's expected speed

Pool: https://kano.is - low 0.5% fee PPLNS 3 Days - Most reliable Solo with ONLY 0.5% fee Bitcointalk thread: Forum
Discord support invite at https://kano.is/ Majority developer of the ckpool code - k for kano
The ONLY active original developer of cgminer. Original master git: https://github.com/kanoi/cgminer

os2sam

Legendary

Offline

Activity: 3586
Merit: 1099

Think for yourself

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.2.2

June 19, 2013, 12:09:18 AM

#11043

Quote from: Moebius327 on June 18, 2013, 10:22:18 PM

Not using --auto-fan,

Use --auto-fan and --auto-gpu

A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing on usenet and in e-mail?

-ck (OP)

Legendary

Offline

Activity: 4578
Merit: 1695

Ruu \o/

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.2.2

June 19, 2013, 02:19:45 AM

#11044

First BFL SC Minirig mining with cgminer:

Quote from: ckolivas on June 19, 2013, 02:18:34 AM

It's been up and down numerous times as I've been chipping away at the code to make it work at its theoretical maximum 480GH.

It's mostly working now. Here's what I've got:

Code:

cgminer version 3.2.2 - Started: [2013-06-19 02:17:06]
--------------------------------------------------------------------------------
(5s):477.6G (avg):472.1Gh/s | A:16 R:0 HW:193 U:10.8/m WU:6575.3/m
ST: 2 SS: 0 NB: 2 LW: 11012 GF: 0 RF: 0
Connected to XXX diff 500
Block: 00179d4404ca1359... Diff:19.3M Started: [02:18:28] Best share: 9.56K
--------------------------------------------------------------------------------
[P]ool management [S]ettings [D]isplay options [Q]uit
BAS 0: max 68C 3.28V | 56.23G/58.22Gh/s | A:1 R:0 HW:18 U: 0.67/m
BAS 1: max 69C 3.27V | 58.92G/60.48Gh/s | A:1 R:0 HW:23 U: 0.67/m
BAS 2: max 74C 3.27V | 60.53G/59.85Gh/s | A:4 R:0 HW:19 U: 2.69/m
BAS 3: max 80C 3.28V | 62.52G/61.58Gh/s | A:1 R:0 HW:20 U: 0.67/m
BAS 4: max 86C 3.27V | 74.56G/59.90Gh/s | A:4 R:0 HW:39 U: 2.69/m
BAS 5: max 71C 3.28V | 64.25G/58.79Gh/s | A:1 R:0 HW:25 U: 0.67/m
BAS 6: max 81C 3.27V | 59.93G/58.98Gh/s | A:2 R:0 HW:25 U: 1.34/m
BAS 7: max 72C 3.27V | 43.22G/60.81Gh/s | A:2 R:0 HW:25 U: 1.34/m
--------------------------------------------------------------------------------

Note the hardware error count may appear very high, but bear in mind that it's mining at diff 500

Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel
2% Fee Solo mining at solo.ckpool.org
-ck

LogicalUnit

Sr. Member

Offline

Activity: 299
Merit: 250

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.2.2

June 19, 2013, 02:27:03 AM

#11045

Found a bug in 3.2.1: after several days of running, the output became all HW errors. I didn't manage to get a screenshot of it because it went back to normal after looking at the Pools settings, but could it be an integer overflow somewhere in the code? The hardware was still functioning normally.

kano

Legendary

Offline

Activity: 4732
Merit: 1905

Linux since 1997 RedHat 4

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.2.2

June 19, 2013, 04:55:37 AM

#11046

... and an update? to my previous post also

I was downgraded to a 4xSingle Minirig Cheesy

But now even on windows (got forbid Tongue

) it's hashing away so well.

Yeah my post above became a certain other non-cgminer person's MiniRig

Anyway ...

and yes the HW error rate - like ckolivas mentioned above - is low
In my case below 1% ... but at 236GH/s .. who cares?

jamesg

VIP
Legendary

Offline

Activity: 1358
Merit: 1000

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.2.2

June 19, 2013, 06:23:58 AM

#11047

Thank you to conman and kano for getting cgminer up and running so quickly with the latest BFL firmware.

You guys rock. Cheesy

unpack

Member

Offline

Activity: 292
Merit: 10

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.2.2

June 19, 2013, 06:47:28 AM

#11048

After the release, would like to add MD5 value, SHA1, SHA256, prevent the virus
thank very much

kano

Legendary

Offline

Activity: 4732
Merit: 1905

Linux since 1997 RedHat 4

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.2.2

June 19, 2013, 10:02:44 AM

#11049

Quote from: unpack on June 19, 2013, 06:47:28 AM

After the release, would like to add MD5 value, SHA1, SHA256, prevent the virus
thank very much

Each folder copy of the release in my cgminer-binaries git, I put an MD5SUM
e.g. https://github.com/kanoi/cgminer-binaries/blob/master/3.2.2/MD5SUM

tnkflx

Sr. Member

Offline

Activity: 349
Merit: 250

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.2.2

June 19, 2013, 10:18:24 AM

#11050

Quote from: LogicalUnit on June 19, 2013, 02:27:03 AM

Saw this with 3.2.2 as well...

| Operating electrum.be & us.electrum.be |

jborkl

Sr. Member

Offline

Activity: 246
Merit: 250

Team Heritage Motorsports

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.2.2

June 19, 2013, 03:02:47 PM

#11051

Can not believe how fast you guys got that MR up to full speed. Awesome work

Jason Borkland | Collision repair and refinish | Mobile hail damage estimating | Global Bitcoin News | Team Heritage Motorsports

neil_mccauley

Newbie

Offline

Activity: 46
Merit: 0

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.2.2

June 19, 2013, 03:42:27 PM

#11052

Quote from: neil_mccauley on June 18, 2013, 04:57:32 AM

I have a problem with the ASIC Miner USB Erupters and CGMiner 3.1.1.
I had two working fine with CGMiner 3.1.1 on my computer then I shipped them to someone else and now they can't get one of the USB Miners to work.

Steps taken on the affected computer:
Installed zadig
Installed USBtoUARTBridgeVCPDrivers
Rebooted the computer, did not change any of the drivers. Zadig reports that the Erupter is using the correct USB to UART driver.

Verified that the Erupters are using COM5 and COM7 in device manager

Ran CGMiner 3.1.1 with the following arguments:
cgminer-nogpu.exe --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S/./COM5 -S/./COM7

One of the devices works fine and one always gives the following error:
Started cgminer 3.1.1
Icarus Detect: Test failed at/./COM5: get 00000000, should: 000187a2
Reset failed! not an Avalon? (0: c1 4f 87 64)
Avalon: Goto idle mode

The device on COM7 always works so I'm trying to find out if it is a software problem or a hardware problem. Any help is appreciated. Thanks in advance.

EDIT: I read 3.2.2 will fix many usb issues. Will give that a shot and report back.

It turns out that adding a USB hub resolved this. Not sure why it did not work when plugged directly into the computer, but I'll take the win.

Trongersoll

Hero Member

Offline

Activity: 490
Merit: 501

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.2.2

June 19, 2013, 04:23:03 PM
Last edit: June 19, 2013, 06:52:05 PM by Trongersoll

#11053

Quote from: neil_mccauley on June 19, 2013, 03:42:27 PM

Quote from: neil_mccauley on June 18, 2013, 04:57:32 AM

It turns out that adding a USB hub resolved this. Not sure why it did not work when plugged directly into the computer, but I'll take the win.

some computers are challenged when it comes to supplying power via USB i have a Netbook that will run two ASICminer USBs fine, add a third and it turns off. it will turn on and reboot fine, but will only run 2 of the 3 USBs. was the hub that fixed your problem powered?

vekt0r7

Newbie

Offline

Activity: 17
Merit: 0

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.2.2

June 19, 2013, 06:20:37 PM

#11054

"--temp-cutoff" doesn't work for me, my GPU keeps on hashing even above the allowed target temperature.

Code:

cgminer -o pool-de.50btc.com:8332 -u [username] -p [password] -o http://mint.bitminter.com:8332 -u [username] -p [password] -I 9 --temp-cutoff 70

pause
http://abload.de/img/tempcutoffgcjnu.png

Anybody got an idea?

gyverlb

Hero Member

Offline

Activity: 896
Merit: 1026

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.2.2

June 19, 2013, 06:32:43 PM

#11055

Quote from: vekt0r7 on June 19, 2013, 06:20:37 PM

"--temp-cutoff" doesn't work for me, my GPU keeps on hashing even above the allowed target temperature.

Code:

cgminer -o pool-de.50btc.com:8332 -u [username] -p [password] -o http://mint.bitminter.com:8332 -u [username] -p [password] -I 9 --temp-cutoff 70

pause

Anybody got an idea?

I don't remember but don't you need --auto-gpu for that?

P2pool tuning guide
Trade BTC for /$ at bitcoin.de (referral), it's cheaper and faster (acts as escrow and lets the buyers do bank transfers).
Tip: 17bdPfKXXvr7zETKRkPG14dEjfgBt5k2dd

vekt0r7

Newbie

Offline

Activity: 17
Merit: 0

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.2.2

June 19, 2013, 06:38:20 PM

#11056

Quote from: gyverlb on June 19, 2013, 06:32:43 PM

Quote from: vekt0r7 on June 19, 2013, 06:20:37 PM

"--temp-cutoff" doesn't work for me, my GPU keeps on hashing even above the allowed target temperature.

Code:

cgminer -o pool-de.50btc.com:8332 -u [username] -p [password] -o http://mint.bitminter.com:8332 -u [username] -p [password] -I 9 --temp-cutoff 70

pause
http://abload.de/img/tempcutoffgcjnu.png

Anybody got an idea?

I don't remember but don't you need --auto-gpu for that?

Interesting. But what if I don't want cgminer to mess with my GPU clock speed? I just want it to stop if the temp gets too high. Is there a way to achieve that?

FiatKiller

Sr. Member

Offline

Activity: 378
Merit: 250

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.2.2

June 19, 2013, 06:51:32 PM

#11057

I already have 10 Block Eruptors running smoothly on a PC with 3.1.1

I should be getting my first Jale tomorrow. The readme seems to say that I don't need to add any additional switches for it... correct?
Or just add the additional com port number?

thanks

LTC: LdxgJQLUdr8hZ79BV5AYbxkBUdaXctXAPi
MoonCoin Gambling: https://coin-horse.com/MON/

gyverlb

Hero Member

Offline

Activity: 896
Merit: 1026

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.2.2

June 19, 2013, 06:58:12 PM

#11058

Quote from: vekt0r7 on June 19, 2013, 06:38:20 PM

Quote from: gyverlb on June 19, 2013, 06:32:43 PM

Quote from: vekt0r7 on June 19, 2013, 06:20:37 PM

"--temp-cutoff" doesn't work for me, my GPU keeps on hashing even above the allowed target temperature.

Code:

cgminer -o pool-de.50btc.com:8332 -u [username] -p [password] -o http://mint.bitminter.com:8332 -u [username] -p [password] -I 9 --temp-cutoff 70

pause
http://abload.de/img/tempcutoffgcjnu.png

Anybody got an idea?

I don't remember but don't you need --auto-gpu for that?

Interesting. But what if I don't want cgminer to mess with my GPU clock speed? I just want it to stop if the temp gets too high. Is there a way to achieve that?

I don't think it will mess with your GPU clock speed unless you give it a frequency range with --gpu-engine.

P2pool tuning guide
Trade BTC for /$ at bitcoin.de (referral), it's cheaper and faster (acts as escrow and lets the buyers do bank transfers).
Tip: 17bdPfKXXvr7zETKRkPG14dEjfgBt5k2dd

xjack

Hero Member

Offline

Activity: 539
Merit: 500

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.2.2

June 19, 2013, 07:35:55 PM
Last edit: June 19, 2013, 09:04:00 PM by xjack

#11059

Feedback with Anker 10 Port USB 3.0 hub on Win7 with 10 Block Erupters.

3.2/3.2.2 = two zombies within 10 minutes every time. Zombies were different USBs each time - tried on USB 2.0 and 3.0 ports.

Back on 3.1.1 for a few hours now with no zombies on USB 3.0 port.

Thanks for your hard work on cgminer!

xjack - 1xjackDMgJCLn1LDtbgh51DYw6uRgeHVb
Reputation thread - https://bt.irlbtc.com/view/482124.0

kano

Legendary

Offline

Activity: 4732
Merit: 1905

Linux since 1997 RedHat 4

Re: CGMINER ASIC FPGA GPU overc monit fanspd RPC linux/win/osx/mip/r-pi 3.2.2

June 19, 2013, 10:12:11 PM

#11060

Quote from: FiatKiller on June 19, 2013, 06:51:32 PM

BFL ASIC is all auto USB detect since the first version of the driver we wrote.

Pages: « 1 ... 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 [553] 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 ... 843 »

Page 552

Viewing Page: 553