Use 3.1.1 where you have to specify the com port of each individual device and then just don't list the com ports of your block erupters?

I'm trying to run my first BFL 5GH miner (Jalapeno) using cgminer 3.1.1 alongside 10 ASICMINER USBs in Windows, and I could use some help from someone with more experience! Can I run this combination of ASICs in the same cgminer instance?

Currently when I add "--enable-bflsc" to what I've used to run the ASICMINERs, or just try "cgminer --enable-bflsc", I get the following error:

[timestamp] cgminer: --enable-bflsc: unrecognized option

I have installed the winUSB driver with zidig as outlined in the readme.

Any help would be vastly appreciated!! I'd be more than happy to dontate something small, say BTC0.1, to whoever can help me figure this out, and smaller amounts to anyone who takes the time to try.

Perhaps someone could start by posting the proper start up command to use with BFL ASICs? I can't seem to find it spelled out explicitly anywhere more than it is in the manual.

Thanks

Don't use --enable-bflsc option.  That's a compile time option, not a run-time option.  
Yes you can run the combination.    See the ASIC readme file.

EDIT:

D'oh.  Kano beat my reply by 14 seconds.

Okay so am I supposed to be running it using the exact command I did with just the ASICMINER UBSs? Which was something like this:

--icarus-options 115200:1:1 --icarus-timing 3.0=100 -S COM3 -S COM4 -S COM5 -S COM6 -S COM7 -S COM8 -S COM9

When I try that, the ASICMINERs run fine but then I also get this error:

"BitForceSC detect <2:27> get details return invalid/timed out <0:-7>"

I just noticed that at first when I had used the wrong driver (the one from the BFL page) I could see the BLFSC in the ports section of device manager, but now that I have used zadig to install the WinUSB driver (v6.1.7600.16385), it's not showing up there.

Is it supposed to be?

Again any help will be greatly appreciated!


Thanks again

I have used more than ten at once with two digit coms and they work fine, same cgminer but it was Windows 8.

Update: I left this machine mining for about an hour, with that error continuing (as the ASICMINERs where running), and it seems to have corrected itself. So far it looks like it is hashing at almost exactly 5GH/s, hopefully the error won't persist.

I've very grateful everyone who read my post and/or offered help!

0.075 tip sent with thanks to each -Redacted- and kano, spend it in good health.   

Thanks

There's been quite a few changes since 3.1.1 so if you are having trouble with 3.1.1 and the Jalapeno then you can easily get around it by running 2 cgminers as follows:

Run the 3.1.1 one above like you already are but add --usb BAS:0 so it will ignore the BFL SC's - the Jalapeno

Run a second one but 3.2.2 with a different usb setting --usb ICA:0 so it will ignore all Icarus devices (the Asicminer USB is an Icarus device)

The two wont attempt to touch the other's devices.

Wow great advice thanks again, I've bookmarked this in case I run in to any problems in the future.

That's where I found it, just trying to help someone who didn't RTFM.   

ok, cgminer -n gets the following:

./cgminer -n
 [2013-06-21 15:10:01] CL Platform 0 vendor: Advanced Micro Devices, Inc.                    
 [2013-06-21 15:10:01] CL Platform 0 name: AMD Accelerated Parallel Processing                    
 [2013-06-21 15:10:01] CL Platform 0 version: OpenCL 1.2 AMD-APP (1113.2)                    
 [2013-06-21 15:10:01] Platform 0 devices: 1                    
 [2013-06-21 15:10:01]    0   Tahiti                    
 [2013-06-21 15:10:01] Failed to ADL_Adapter_ID_Get. Error -10                    
 [2013-06-21 15:10:01] This error says the device is not enabled                    
 [2013-06-21 15:10:01] Failed to ADL_Adapter_ID_Get. Error -10                    
 [2013-06-21 15:10:01] This error says the device is not enabled                    
 [2013-06-21 15:10:01] GPU 0 AMD Radeon HD 7900 Series  hardware monitoring enabled                    
 [2013-06-21 15:10:01] 1 GPU devices max detected                    
 [2013-06-21 15:10:01] USB all: found 7 devices - listing known devices                    
 [2013-06-21 15:10:01] No known USB devices

aticonfig --lsa
* 0. 01:00.0 AMD Radeon HD 7900 Series
  1. 04:00.0 AMD Radeon HD 7900 Series


There is a Sapphire 7970 in the PCIe X16  slot and a GigaByte  7950 on a PCIe X16 PCIe X16 extender which is plugged into a PCIe X16 connector on the MB which is actually X4. any ideas why I'm only seeing one card? this is running on 64 bit ubuntu 12.whatever LTS i didn't see anything specific to this in README or GPU-README