<<  >> (p.536)
    Author Topic: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.1  (Read 5806561 times)
    This is a self-moderated topic. If you do not want to be moderated by the person who started this topic, create a new topic. (3 posts by 1+ user deleted.)

    • GoldBit89
    Hero Member
    *****
    Offline Offline

    Activity: 526
    Merit: 500


    Its all about the Gold


    View Profile
    June 06, 2013, 07:58:42 PM
     #10701
    i keep getting Stratum connection to pool 0 interrupted :stratum  from pool 0 requested work restart.

    how do i resolve this? i am using same setting that never had this error before until i just started a new miner on different pool.
    FTC  6nvzqqaCEizThvgMeC86MGzhAxGzKEtNH8 |WDC WckDxipCes2eBmxrUYEhrUfNNRZexKuYjR  |BQC bSDm3XvauqWWnqrxfimw5wdHVDQDp2U8XU
    BOT EjcroqeMpZT4hphY4xYDzTQakwutpnufQR |BTG geLUGuJkhnvuft77ND6VrMvc8vxySKZBUz |LTC  LhXbJMzCqLEzGBKgB2n73oce448BxX1dc4
    BTC 1JPzHugtBtPwXgwMqt9rtdwRxxWyaZvk61  |ETH 0xA6cCD2Fb3AC2450646F8D8ebeb14f084F392ACFf

  • Lucko
    Hero Member
    *****
    Offline Offline

    Activity: 826
    Merit: 1000



    View Profile
    June 06, 2013, 08:22:53 PM
     #10702
    Quote from: GoldBit89 on June 06, 2013, 07:58:42 PM
    i keep getting Stratum connection to pool 0 interrupted :stratum  from pool 0 requested work restart.

    how do i resolve this? i am using same setting that never had this error before until i just started a new miner on different pool.
    Did you use 2.x before that? I know for some pools that have problems with 3.x... don't know why but I know it is happening and that admins are looking into this. I can't run 3.x on Bitparking and I had also some porblems with it on Slush or BtcGuild. So I went back to 2.11.4. But now that I will get ASICminer USB I will have no option to use 2.x... Or is there?

  • Trongersoll
    Hero Member
    *****
    Offline Offline

    Activity: 490
    Merit: 501



    View Profile
    June 06, 2013, 08:24:51 PM
     #10703
    Quote from: turtle83 on June 06, 2013, 07:55:50 PM
    Quote from: Trongersoll on June 06, 2013, 07:19:33 PM
    *sniff* *sniff* ok, i need some hand holding. I grabbed the tarball from GIT for the latest version. I copied the files into my cgminer directory (this is 32 bit Ubuntu), over writing the existing files. I ran autogen.sh and then make. I plugged in an ASICminer USB stick. the green light is on. then i ran ./cgminer with no parameters. It started GPU mining fine, but didn't show anything about the ASICminer. Do i need to reboot with the USB stick plugged in? or is there a start parameter that i need? Please don't tell me to read the readmes, i did. and i'm terrible at searching 100s of pages of a thread. I did the group join thing in the Readme.

    stop cgminer

    now unplug the USB thing
    plug in the usb thing back in.

    ^ Not troling. im serious.

    save this file https://github.com/ckolivas/cgminer/blob/master/01-cgminer.rules asetc/udev/rules.d/01-cgminer.rules

    sudo service udev restart

    download cgminer 3.1.1 (for sake of clarity into new directory)
    Code:
    ./autogen
    ./configure <the arguments u normally pass> --enable-icarus
    make


    lsdev/ttyUSB*
    make note of the devices.

    run cgminer
    Code:
    cgminer <arguments u normally use> --icarus-options 115200:1:1 --icarus-timing 3.0=100 -Sdev/ttyUSB0 -Sdev/ttyUSB1  <repeat for each usb tty device>


    thank you!

    this seemed to work, no i just have Privilege issues on USBtty0

    [edit] using sudo got around the permission issue, is there a better solution? I'M MINING!!!!!

  • GoldBit89
    Hero Member
    *****
    Offline Offline

    Activity: 526
    Merit: 500


    Its all about the Gold


    View Profile
    June 06, 2013, 08:29:41 PM
     #10704
    Quote from: Lucko on June 06, 2013, 08:22:53 PM
    Quote from: GoldBit89 on June 06, 2013, 07:58:42 PM
    i keep getting Stratum connection to pool 0 interrupted :stratum  from pool 0 requested work restart.

    how do i resolve this? i am using same setting that never had this error before until i just started a new miner on different pool.
    Did you use 2.x before that? I know for some pools that have problems with 3.x... don't know why but I know it is happening and that admins are looking into this. I can't run 3.x on Bitparking and I had also some porblems with it on Slush or BtcGuild. So I went back to 2.11.4. But now that I will get ASICminer USB I will have no option to use 2.x... Or is there?

    been using 3.1 , didnt have any problems until i switched miner pools.
    FTC  6nvzqqaCEizThvgMeC86MGzhAxGzKEtNH8 |WDC WckDxipCes2eBmxrUYEhrUfNNRZexKuYjR  |BQC bSDm3XvauqWWnqrxfimw5wdHVDQDp2U8XU
    BOT EjcroqeMpZT4hphY4xYDzTQakwutpnufQR |BTG geLUGuJkhnvuft77ND6VrMvc8vxySKZBUz |LTC  LhXbJMzCqLEzGBKgB2n73oce448BxX1dc4
    BTC 1JPzHugtBtPwXgwMqt9rtdwRxxWyaZvk61  |ETH 0xA6cCD2Fb3AC2450646F8D8ebeb14f084F392ACFf

  • Lucko
    Hero Member
    *****
    Offline Offline

    Activity: 826
    Merit: 1000



    View Profile
    June 06, 2013, 08:45:11 PM
     #10705
    Quote from: GoldBit89 on June 06, 2013, 08:29:41 PM
    Quote from: Lucko on June 06, 2013, 08:22:53 PM
    Quote from: GoldBit89 on June 06, 2013, 07:58:42 PM
    i keep getting Stratum connection to pool 0 interrupted :stratum  from pool 0 requested work restart.

    how do i resolve this? i am using same setting that never had this error before until i just started a new miner on different pool.
    Did you use 2.x before that? I know for some pools that have problems with 3.x... don't know why but I know it is happening and that admins are looking into this. I can't run 3.x on Bitparking and I had also some porblems with it on Slush or BtcGuild. So I went back to 2.11.4. But now that I will get ASICminer USB I will have no option to use 2.x... Or is there?

    been using 3.1 , didnt have any problems until i switched miner pools.
    Pool? I think it is pool related... Merged mining... There is something now in 3.x version that is different... If I put 3.x miner to Bitparking I get a lot of thous. But non if I use 2.x

  • turtle83
    Sr. Member
    ****
    Offline Offline

    Activity: 322
    Merit: 250


    Supersonic


    View Profile WWW
    June 06, 2013, 08:51:59 PM
     #10706
    Quote from: Trongersoll on June 06, 2013, 08:24:51 PM
    [edit] using sudo got around the permission issue, is there a better solution? I'M MINING!!!!!

    ls -lhdev/ttyUSB0
    ull see that it likely had group permissions for dialout.

    u need to add that to the user ur logged in as.
    Code:
    sudo usermod -a -G dialout yourusername

    Then your user has permission to talk to those interfaces
    FPGA/ASIC only: Raspberry pi packages for cgminer | Ubuntu PPA for mining related software

  • Trongersoll
    Hero Member
    *****
    Offline Offline

    Activity: 490
    Merit: 501



    View Profile
    June 06, 2013, 09:15:06 PM
     #10707
    Quote from: turtle83 on June 06, 2013, 08:51:59 PM
    Quote from: Trongersoll on June 06, 2013, 08:24:51 PM
    [edit] using sudo got around the permission issue, is there a better solution? I'M MINING!!!!!

    ls -lhdev/ttyUSB0
    ull see that it likely had group permissions for dialout.

    u need to add that to the user ur logged in as.
    Code:
    sudo usermod -a -G dialout yourusername

    Then your user has permission to talk to those interfaces

    It didn't seem to help, i saw something about not having permission woosh by but couldn't read it. I'm content using sudo until i get a chance to figure it out. I probably  need to redirect the output to a file so that i can see what it said.

    Thanks again for your help!

  • -ck (OP)
    Legendary
    *
    Offline Offline

    Activity: 4578
    Merit: 1695


    Ruu \o/


    View Profile WWW
    June 06, 2013, 09:37:52 PM
     #10708
    Quote from: GoldBit89 on June 06, 2013, 07:58:42 PM
    i keep getting Stratum connection to pool 0 interrupted :stratum  from pool 0 requested work restart.

    how do i resolve this? i am using same setting that never had this error before until i just started a new miner on different pool.
    That's your pool having instability. Use a different pool.
    Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel
    2% Fee Solo mining at solo.ckpool.org
    -ck

  • kano
    Legendary
    *
    Offline Offline

    Activity: 4746
    Merit: 1907


    Linux since 1997 RedHat 4


    View Profile
    June 06, 2013, 09:51:47 PM
     #10709
    Quote from: Trongersoll on June 06, 2013, 09:15:06 PM
    Quote from: turtle83 on June 06, 2013, 08:51:59 PM
    Quote from: Trongersoll on June 06, 2013, 08:24:51 PM
    [edit] using sudo got around the permission issue, is there a better solution? I'M MINING!!!!!

    ls -lhdev/ttyUSB0
    ull see that it likely had group permissions for dialout.

    u need to add that to the user ur logged in as.
    Code:
    sudo usermod -a -G dialout yourusername

    Then your user has permission to talk to those interfaces

    It didn't seem to help, i saw something about not having permission woosh by but couldn't read it. I'm content using sudo until i get a chance to figure it out. I probably  need to redirect the output to a file so that i can see what it said.

    Thanks again for your help!
    All versions of cgminer have documented how to deal with permission errors on linux
    It varies on the version of cgminer (and devices) you are using - but it's listed in FPGA-README ...
    Pool: https://kano.is - low 0.5% fee PPLNS 3 Days - Most reliable Solo with ONLY 0.5% fee   Bitcointalk thread: Forum
    Discord support invite at https://kano.is/ Majority developer of the ckpool code - k for kano
    The ONLY active original developer of cgminer. Original master git: https://github.com/kanoi/cgminer

  • Lucko
    Hero Member
    *****
    Offline Offline

    Activity: 826
    Merit: 1000



    View Profile
    June 06, 2013, 10:50:26 PM
     #10710
    Now is now more then 3 days since I post my problem and no replays.

    https://bt.irlbtc.com/view/28402.msg2359449#msg2359449

    Can you please help mi figure this out... It works on BTC even if I don't have GPUs on 99% but about 75 to 90% but it will not for LTC that GPU will soon only be good for. So can you please help me figuring out why I can't go over 8 on intensity.

    Any question I will be happy to answer.

  • -ck (OP)
    Legendary
    *
    Offline Offline

    Activity: 4578
    Merit: 1695


    Ruu \o/


    View Profile WWW
    June 06, 2013, 10:53:22 PM
     #10711
    Quote from: Lucko on June 06, 2013, 10:50:26 PM
    Now is now more then 3 days since I post my problem and no replays.

    https://bt.irlbtc.com/view/28402.msg2359449#msg2359449

    Can you please help mi figure this out... It works on BTC even if I don't have GPUs on 99% but about 75 to 90% but it will not for LTC that GPU will soon only be good for. So can you please help me figuring out why I can't go over 8 on intensity.

    Any question I will be happy to answer.
    GPU-README and SCRYPT-README

    likely you have a software+hardware setup that is ok for BTC but not for LTC. Maybe system ram or other random magic that ltc might need.
    Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel
    2% Fee Solo mining at solo.ckpool.org
    -ck

  • Lucko
    Hero Member
    *****
    Offline Offline

    Activity: 826
    Merit: 1000



    View Profile
    June 06, 2013, 11:12:09 PM
     #10712
    Quote from: ckolivas on June 06, 2013, 10:53:22 PM
    Quote from: Lucko on June 06, 2013, 10:50:26 PM
    Now is now more then 3 days since I post my problem and no replays.

    https://bt.irlbtc.com/view/28402.msg2359449#msg2359449

    Can you please help mi figure this out... It works on BTC even if I don't have GPUs on 99% but about 75 to 90% but it will not for LTC that GPU will soon only be good for. So can you please help me figuring out why I can't go over 8 on intensity.

    Any question I will be happy to answer.
    GPU-README and SCRYPT-README

    likely you have a software+hardware setup that is ok for BTC but not for LTC. Maybe system ram or other random magic that ltc might need.
    That was not the question. I can't setup intensety over 8. If I do interesting things happened. I'm copy pasting...

    Quote from: Lucko on June 03, 2013, 04:14:55 PM
    Quote from: Lucko on June 03, 2013, 08:47:57 AM
    Hi!

    I have a question. Why I can't setup intensity in my CGminer. If I add -I 9 into command line all my cores run with about the same speed and is sub 200MH... I have 8 GPU cores and if I setup -I 9 I get only 1.1something GH... If I don't added I get 2.0something GH. It is still not full speed but much beater then with I setting. What I should be seeing is 2.6something...

    If I start miner without -I setting and change it later it happens that all others cart get negative intensity setting... When I set them all I get the same as if I use config file.

    This happened when I added 5970 and 5770 to my miner. With only 5 cores I didn't have problems. But I do have a mix of cards if that might be a problem. 6790, 6870, 5850, 2x5970, 5770. Running 2.11.4, but the same problem is on 3.2.0(3.x has problems with my pool. I get disconnected all the time).

    Win 7 x64... I did notice that CPU is on 100%. With only 5 cores it was less then 30%. Any other data?

    Thanks

    EDIT: Figure out why I have 100% CPU. CCC problem... Uninstalled it at it is fine...
    Interesting... I just figure another thing out. If I set -I 8 everything is ok. If I set it to 9 even on one card doesn't work... Ideas?

    EDIT: I would like to setup some cards to 10 and some to 12. Is there a limit on total intensity?

  • -ck (OP)
    Legendary
    *
    Offline Offline

    Activity: 4578
    Merit: 1695


    Ruu \o/


    View Profile WWW
    June 06, 2013, 11:34:11 PM
     #10713
    Quote from: Lucko on June 06, 2013, 11:12:09 PM
    Quote from: ckolivas on June 06, 2013, 10:53:22 PM
    Quote from: Lucko on June 06, 2013, 10:50:26 PM
    Now is now more then 3 days since I post my problem and no replays.

    https://bt.irlbtc.com/view/28402.msg2359449#msg2359449

    Can you please help mi figure this out... It works on BTC even if I don't have GPUs on 99% but about 75 to 90% but it will not for LTC that GPU will soon only be good for. So can you please help me figuring out why I can't go over 8 on intensity.

    Any question I will be happy to answer.
    GPU-README and SCRYPT-README

    likely you have a software+hardware setup that is ok for BTC but not for LTC. Maybe system ram or other random magic that ltc might need.
    That was not the question. I can't setup intensety over 8. If I do interesting things happened. I'm copy pasting...

    SNIP

    It's still the answer.
    Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel
    2% Fee Solo mining at solo.ckpool.org
    -ck

  • Lucko
    Hero Member
    *****
    Offline Offline

    Activity: 826
    Merit: 1000



    View Profile
    June 06, 2013, 11:50:00 PM
     #10714
    Quote from: ckolivas on June 06, 2013, 11:34:11 PM
    It's still the answer.
    I'm not mining LTC... So SCRYPT-README doesn't apply or am I missing something? And I don't have GPU-README. I have README and I have read it. I can't find anything. Did I miss something in it? I just glance over it again. Can't find anything relevant. The only think that might apply is RAM but I have enough of it RAM. More then 1 GB still free...

    EDIT: And why do I get negative intensity if I put all in dynamic and one to setting over 9. It sounds to me like a bug...

  • sLide.
    Full Member
    ***
    Offline Offline

    Activity: 170
    Merit: 100



    View Profile
    June 06, 2013, 11:53:45 PM
     #10715
    I'm experiencing a issue with CGminer.

    I recently moved my XFX 6870 from my gaming machine which was used to mine when I wasn't gaming to my first rig.  I keep getting error's from windows saying it had to stop the program from running.

    MoBo: msi x58A-GD45
    Proc: I7 920
    Memory : 2GB
    Video Card: 6870 XFX HD - CCC Version - 13.4 Direct3D Version 9.14.10.0969

    Not entirely sure what the problem could be.  I've tried running as admin.  Any help?  Thanks!
    Aim - Slide.0
    1J6UeiXtBYXmpA6uajRs3aJpUD1Tsj1CF3 - Tips?

  • Lucko
    Hero Member
    *****
    Offline Offline

    Activity: 826
    Merit: 1000



    View Profile
    June 06, 2013, 11:55:50 PM
     #10716
    Quote from: sLide. on June 06, 2013, 11:53:45 PM
    I'm experiencing a issue with CGminer.

    I recently moved my XFX 6870 from my gaming machine which was used to mine when I wasn't gaming to my first rig.  I keep getting error's from windows saying it had to stop the program from running.

    MoBo: msi x58A-GD45
    Proc: I7 920
    Memory : 2GB
    Video Card: 6870 XFX HD - CCC Version - 13.4 Direct3D Version 9.14.10.0969

    Not entirely sure what the problem could be.  I've tried running as admin.  Any help?  Thanks!
    I had same problem with incompatible OpenCL driver combination... Changing it might help

  • xorxor
    Sr. Member
    ****
    Offline Offline

    Activity: 476
    Merit: 253



    View Profile
    June 07, 2013, 12:49:58 AM
     #10717
    Quote from: xorxor on June 06, 2013, 02:19:54 AM
    Quote from: ckolivas on June 06, 2013, 02:03:36 AM
    Quote from: xorxor on June 06, 2013, 01:09:41 AM
    Hi

    Is there any way of disabling cashing of shares on disconnect?
    with "--scrypt" Cgminer keeps crashing on internet or pool disconects.

    changed mobo, GPU's,ram,risers,PSU's . it allways happens on some locations.

    no problems on SHA.

    using proxy did not helped.
    --lowmem

    thx!  testing...

    nope Sad  still crashes on random pool disconects swiches.
    same hardware ok in more stable network enviroment and on sha.


    same software/driver/sdk/ stable in over 10 different rigs in 2 another locations.
    fuck deeponion, fuck bitcoincash, all glory to one BITCOIN

  • runlinux
    Hero Member
    *****
    Offline Offline

    Activity: 566
    Merit: 500


    View Profile WWW
    June 07, 2013, 01:30:09 AM
     #10718
    I'm getting the same issue. Running the latest Minepeon with cgminer. It works just fine with bfgminer. I'd rather use cgminer though.

    Quote from: bitcoindaddy on June 06, 2013, 07:54:53 PM
    Both 3.1.1 and 3.2.0 return this message:

    [2013-06-06 15:55:12] BitForceSC detect (2:9) get details returned nothing (0:0)

    What does this mean? Is the Jalapeno busted or am I missing something?


     [2013-06-06 15:58:55] Started cgminer 3.2.0
     [2013-06-06 15:58:55] Started cgminer 3.2.0
     [2013-06-06 15:58:55] USB all: found 16 devices - listing known devices
    .USB dev 0: Bus 2 Device 3 ID: 10c4:ea60
      Manufacturer: 'Silicon Labs'
      Product: 'CP2102 USB to UART Bridge Controller'
    .USB dev 1: Bus 2 Device 6 ID: 10c4:ea60
      Manufacturer: 'Silicon Labs'
      Product: 'CP2102 USB to UART Bridge Controller'
    .USB dev 2: Bus 2 Device 7 ID: 10c4:ea60
      Manufacturer: 'Silicon Labs'
      Product: 'CP2102 USB to UART Bridge Controller'
    .USB dev 3: Bus 2 Device 8 ID: 10c4:ea60
      Manufacturer: 'Silicon Labs'
      Product: 'CP2102 USB to UART Bridge Controller'
    .USB dev 4: Bus 2 Device 9 ID: 0403:6014
      Manufacturer: 'Butterfly Labs'
      Product: 'BitFORCE SHA256 SC'
     [2013-06-06 15:58:55] 5 known USB devices
     [2013-06-06 15:59:00] BitForceSC detect (2:9) get details returned nothing (0:0)
     [2013-06-06 15:59:00] Need to specify at least one pool server.
    Input server details.
    Khajiit has wares if you have coin

  • sLide.
    Full Member
    ***
    Offline Offline

    Activity: 170
    Merit: 100



    View Profile
    June 07, 2013, 01:48:45 AM
     #10719
    Quote from: Lucko on June 06, 2013, 11:55:50 PM
    Quote from: sLide. on June 06, 2013, 11:53:45 PM
    I'm experiencing a issue with CGminer.

    I recently moved my XFX 6870 from my gaming machine which was used to mine when I wasn't gaming to my first rig.  I keep getting error's from windows saying it had to stop the program from running.

    MoBo: msi x58A-GD45
    Proc: I7 920
    Memory : 2GB
    Video Card: 6870 XFX HD - CCC Version - 13.4 Direct3D Version 9.14.10.0969

    Not entirely sure what the problem could be.  I've tried running as admin.  Any help?  Thanks!
    I had same problem with incompatible OpenCL driver combination... Changing it might help

    In event log, I'm getting this error -

    - System

      - Provider

       [ Name]  Application Error
     
      - EventID 1000

       [ Qualifiers]  0
     
       Level 2
     
       Task 100
     
       Keywords 0x80000000000000
     
      - TimeCreated

       [ SystemTime]  2013-06-07T14:03:10.000000000Z
     
       EventRecordID 1752
     
       Channel Application
     
       Computer Miner1-PC
     
       Security
     

    - EventData

       cgminer.exe
       0.0.0.0
       518e20db
       cgminer.exe
       0.0.0.0
       518e20db
       c0000005
       000265be
       12a0
       01ce6387bbccda57
       C:\Users\Miner1\Desktop\cgminer\cgminer-3.1.1-windows\cgminer.exe
       C:\Users\Miner1\Desktop\cgminer\cgminer-3.1.1-windows\cgminer.exe
       fc31de57-cf7a-11e2-8d68-6c626de9cc51
    Aim - Slide.0
    1J6UeiXtBYXmpA6uajRs3aJpUD1Tsj1CF3 - Tips?

  • -ck (OP)
    Legendary
    *
    Offline Offline

    Activity: 4578
    Merit: 1695


    Ruu \o/


    View Profile WWW
    June 07, 2013, 03:53:37 AM
     #10720
    Quote from: Lucko on June 06, 2013, 11:50:00 PM
    Quote from: ckolivas on June 06, 2013, 11:34:11 PM
    It's still the answer.
    I'm not mining LTC... So SCRYPT-README doesn't apply or am I missing something? And I don't have GPU-README. I have README and I have read it. I can't find anything. Did I miss something in it? I just glance over it again. Can't find anything relevant. The only think that might apply is RAM but I have enough of it RAM. More then 1 GB still free...

    EDIT: And why do I get negative intensity if I put all in dynamic and one to setting over 9. It sounds to me like a bug...
    So you're mining BTC? Your problem is high cpu, right? So your hardware, along with your settings, and your driver combination are causing it. If you cpu usage is high overall, a dynamic device will be cranked right down into potentially negative levels. Stop trying to go to -I 9 with that many devices. Your bus is likely overloaded.
    Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel
    2% Fee Solo mining at solo.ckpool.org
    -ck
    Pages: « 1 ... 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 [536] 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 ... 843 »
      Print  
Page 535
Viewing Page: 536

IRLBTC™ © 2025 IRLBTC.com