so in the image with red font. u can see difference in power between version .2 and .3 .. .3 is a tad bit better. but in all my pc's with different mobos. different video cards different PSU's, all have now jagged lines. why is this happening.... im not gonna use another miner. but does anyone have a fix to smooth these teeth out?
can we get pics of others power lines on these algo's cause my whole entire lot, just now has this issue. and i know it's either a tweak i need to do, or miner just needs time to mature
? any ideas.
again im working on BTG new fork 144_5
I'm also concerned about erratic power and GPU load with new EWBF on new equihash (BTG 144,5).
I tried both v0.2 and 0.3 and GTX 1070 at different clocks (including stocks) - the same result; as seen on the picture (right panel on the picture):
Older EWBF (0.3.4b) with older equihash is fine with the same cards (left panel on the picture).
EWBF, please comment
Why do you think this is a problem?
This is because the solver is slow and the workload is not homogenous, probably over time this will be slightly improved.
Using SMOS here with latest kernel 4.17
hardware:
motherboard: asrock h110 pro btc (13gpu)
memory : 8gb
cpu g4560
video cards: 12 gtx 1060 palit super jetstream
issue:
gpu gpu 11 and gpu 12 always gets stuck and stops working during gpu detection. Is there a way where you can build the miner to detect all gpus at the very start? similar to how dtsm does it? I noticed getting miners detected one by one i s very slow process and it could be that there is a specific timeout in your program that causes the gpu 11-12 to get stuck in my case.
restarting the miner will cause this issue to be intermittent. sometimes only gpu 12 gets stuck, sometimes both gpu 11 and 12 gets stuck.
please help resolve this. thanks and more power to you ewbf!
Ok, i will check this out.
Hello @EWBF_
Spec:
GPU 0: Gigabyte Windforce 2 NVIDIA GeForce GTX 1060 3GB (3072 MB)
- GPU is together with other video card what i use for my own purpose
OS: Windows 7 x64 Service Pack 1
Video Driver: 397.31
INFO: Algorithm: 144_5
CUDA: Device: 0 GeForce GTX 1060 3GB, 3072 MB i:64
ERROR: out of memory
GPU-Z Report it is 103 Mb ram use so to a simple math 3072 - 103 = 2969 MB there are left
According to
https://forum.bitcoingold.org/t/our-new-equihash-equihash-btg/1512- Quote: Equihash-BTG: "<144,5> parameters require a minimum of 700 MB to run and use about 2.5 GB to run efficiently"
So 2,5G or 2,9G 1060 with 3G Vram it suppose to work but according to EWBF it is not have inaff memory with is ?!?!?!
cheers
This can be the size of virtual memory, check your paging file.
