<<  >> (p.20)
    Author Topic: EWBF's Cuda Equihash Miner 0.6  (Read 86014 times)

    • EWBF_ (OP)
    Full Member
    ***
    Offline Offline

    Activity: 198
    Merit: 160


    View Profile
    July 05, 2018, 10:23:42 PM
     #381
    Quote from: SouthWEBA on July 05, 2018, 09:21:39 PM
    Quote from: EWBF_ on July 05, 2018, 07:24:55 PM
    Quote from: SouthWEBA on July 05, 2018, 04:35:56 PM
    Hello @EWBF_

    hardware:

    motherboard: asrock h110 pro btc (13gpu)
    memory : 4gb
    cpu Celeron 3930
    UNIX - Fedora

    Version 0.3.4b working super to ZEC

    video cards: 13 gtx EVGA SC2 1080Ti

    issue:

    gpu 9 gpu 10 gpu 11 and gpu 12 always gets stuck and stops working during gpu detection.
    May be build the miner to detect all gpus at the very start?

    I tested to start 2 miner

    cuda_devices 0 1 2 3 4 5 6 and 7 8 9 10 11 12

    and is very very very slow process detected card :-( and crashed EWBF

    Please help me ASAP i have +- 3000 card

    13x1070 card working normal

    Hello! check this out: https://mega.nz/#F!uhQR0IRa!jZ_tdULPoUf3ib4O6-1BoQ this is a special version, basically the same v0.3, but with a modified device launch system. Please note that if you do not have a problem with starting up devices, do not use this version!

    This version not working :-(

    I use CUDA 8

    06.07.2018 00:19:09 ERROR: CUDA driver version is insufficient for CUDA runtime version 

    Added cuda 8 version.

  • EWBF_ (OP)
    Full Member
    ***
    Offline Offline

    Activity: 198
    Merit: 160


    View Profile
    July 05, 2018, 10:35:42 PM
     #382
    Quote from: sir_blacks on July 05, 2018, 09:25:48 PM
    Quote from: EWBF_ on July 05, 2018, 07:24:55 PM
    Hello! check this out: https://mega.nz/#F!uhQR0IRa!jZ_tdULPoUf3ib4O6-1BoQ this is a special version, basically the same v0.3, but with a modified device launch system. Please note that if you do not have a problem with starting up devices, do not use this version!

    @EWBF_ hmm after i take this new test version miner it start running what it make me think in other version when it use --cuda_devices 0 & there are 2,3 gpu in reality miner it was not deselect other one coz check this:

    --cuda_devices 1 (2 GPU) - v0.3 normal version

    Code:
    +-------------------------------------------------+
    |         EWBF's Eqihash CUDA miner. v0.3         |
    +-------------------------------------------------+
    23:55:57 INFO: Current pool: btg.suprnova.cc:8866
    23:55:57 INFO: Selected pools: 1
    23:55:57 INFO: Algorithm: 144_5 "BgoldPoW"
    23:55:57 INFO: Devices: User defined.
    23:55:57 INFO: Temperature limit: 90
    23:55:57 INFO: Api: Disabled
    ---------------------------------------------------
    23:55:57 INFO: Target: 00f0f0f0f0f0f0f0...
    23:55:57 INFO: Detected new work: 62f
    23:55:58 CUDA: Device: 0 GeForce GTX 1060 3GB Not selected.
    23:55:58 ERROR: out of memory

    --cuda_devices 0 (2 GPU) - v0.3 normal version
    Code:
    +-------------------------------------------------+
    |         EWBF's Eqihash CUDA miner. v0.3         |
    +-------------------------------------------------+
    20:15:04 INFO: Current pool: btg.suprnova.cc:8866
    20:15:04 INFO: Selected pools: 1
    20:15:04 INFO: Algorithm: 144_5 "BgoldPoW"
    20:15:04 INFO: Devices: User defined.
    20:15:04 INFO: Temperature limit: 90
    20:15:04 INFO: Api: Disabled
    ---------------------------------------------------
    20:15:04 INFO: Target: 00f0f0f0f0f0f0f0...
    20:15:04 INFO: Detected new work: 5b7
    20:15:04 CUDA: Device: 0 GeForce GTX 1060 3GB, 3072 MB i:64
    20:15:04 ERROR: out of memory

    --cuda_devices 0 (2 GPU) - new test version functional one
    Code:
    +-------------------------------------------------+
    |         EWBF's Eqihash CUDA miner. v0.3         |
    +-------------------------------------------------+
    00:11:37 INFO: Current pool: btg.suprnova.cc:8866
    00:11:37 INFO: Selected pools: 1
    00:11:37 INFO: Algorithm: 144_5 "BgoldPoW"
    00:11:37 INFO: Devices: User defined.
    00:11:37 INFO: Temperature limit: 90
    00:11:37 INFO: Api: Disabled
    ---------------------------------------------------
    00:11:38 INFO: Target: 00f0f0f0f0f0f0f0...
    00:11:38 INFO: Detected new work: 636
    00:11:38 Device detection:
    00:11:38 CUDA: Device: 0 GeForce GTX 1060 3GB, 3072 MB i:64
    00:11:38 CUDA: Device: 1 GeForce GTX 650 Not selected.
    00:11:38 Running device threads:
    00:11:38 CUDA: Device: GeForce GTX 1060 3GB 0000:01:00.0 started...

    Power Limit: 74%, Core Clock: +164, Memory: +500 (Samsung Vram)
    Code:
    00:20:46 Temp: GPU0: 63C
    00:20:46 GPU0: 24 Sol/s
    00:20:46 Total speed: 24 Sol/s
    00:20:46 -----------+--------------+
    | GPU | Power usage |  Efficiency  |
    +-----+-------------+--------------+
    |  0  |     82W     |  0.29 Sol/W  |
    +-----+-------------+--------------+

    so conclusion new test version it fix using device correctly (cuda 9.1) ....

    Good that it helped, I will fix this part of the code and include the fix in the next version. Thanks for the feedback.

  • EWBF_ (OP)
    Full Member
    ***
    Offline Offline

    Activity: 198
    Merit: 160


    View Profile
    July 05, 2018, 10:37:21 PM
     #383
    Quote from: Hurtman on July 05, 2018, 08:39:21 PM
    EWBF_
    is there any news about the normal support of Maxwell? (GTX 970/980)

    Sorry, right now there is no news, I'm working on it.

  • valaki
    Newbie
    *
    Offline Offline

    Activity: 6
    Merit: 0


    View Profile
    July 06, 2018, 05:29:23 AM
     #384
    "Quote from: EWBF_ on June 14, 2018, 10:55:16 PM
    Good that it helped, I will fix this part of the code and include the fix in the next version. Thanks for the feedback."

    And EWBF_ please dont forget change -intensity command real 1-64 scale (here intensity 1 and same eat computer resources than 64.., nothing change), its very important! Thank you.

  • SouthWEBA
    Copper Member
    Newbie
    *
    Offline Offline

    Activity: 5
    Merit: 0


    View Profile
    July 06, 2018, 09:01:53 AM
     #385
    Quote from: EWBF_ on July 05, 2018, 10:23:42 PM
    Quote from: SouthWEBA on July 05, 2018, 09:21:39 PM
    Quote from: EWBF_ on July 05, 2018, 07:24:55 PM
    Quote from: SouthWEBA on July 05, 2018, 04:35:56 PM
    Hello @EWBF_

    hardware:

    motherboard: asrock h110 pro btc (13gpu)
    memory : 4gb
    cpu Celeron 3930
    UNIX - Fedora

    Version 0.3.4b working super to ZEC

    video cards: 13 gtx EVGA SC2 1080Ti

    issue:

    gpu 9 gpu 10 gpu 11 and gpu 12 always gets stuck and stops working during gpu detection.
    May be build the miner to detect all gpus at the very start?

    I tested to start 2 miner

    cuda_devices 0 1 2 3 4 5 6 and 7 8 9 10 11 12

    and is very very very slow process detected card :-( and crashed EWBF

    Please help me ASAP i have +- 3000 card

    13x1070 card working normal

    Hello! check this out: https://mega.nz/#F!uhQR0IRa!jZ_tdULPoUf3ib4O6-1BoQ this is a special version, basically the same v0.3, but with a modified device launch system. Please note that if you do not have a problem with starting up devices, do not use this version!

    This version not working :-(

    I use CUDA 8

    06.07.2018 00:19:09 ERROR: CUDA driver version is insufficient for CUDA runtime version 

    Added cuda 8 version.

    Super, thx! All card started normal and working. I have new problem :-(  Load average very big now 27 - 28 please check screen

    https://c2n.me/3Vhrpka.png

    Version 0.3.4b maximum load average 5-6

    Because of this load not working normal command "nvidia-smi -q | grep miner | wc -l" and WathDog reboot all ferms :-(

  • AlexBeard
    Newbie
    *
    Offline Offline

    Activity: 12
    Merit: 0


    View Profile
    July 06, 2018, 09:06:10 AM
     #386
    I am trying to mine btg at suprnova and only get rejected shares, I use hiveos and mined at suprnova before the fork and worked fine, now I changed to new ewbf version, algo 144_5 and new port 8866 but I only get rejected shares, can anyone help me?  Huh

  • gsanjin
    Member
    **
    Offline Offline

    Activity: 191
    Merit: 12


    View Profile
    July 06, 2018, 09:13:34 AM
     #387
    Quote from: AlexBeard on July 06, 2018, 09:06:10 AM
    I am trying to mine btg at suprnova and only get rejected shares, I use hiveos and mined at suprnova before the fork and worked fine, now I changed to new ewbf version, algo 144_5 and new port 8866 but I only get rejected shares, can anyone help me?  Huh

    Are you sure you added required parameter --pers BgoldPoW?

  • AlexBeard
    Newbie
    *
    Offline Offline

    Activity: 12
    Merit: 0


    View Profile
    July 06, 2018, 09:23:03 AM
     #388
    Quote from: gsanjin on July 06, 2018, 09:13:34 AM
    Quote from: AlexBeard on July 06, 2018, 09:06:10 AM
    I am trying to mine btg at suprnova and only get rejected shares, I use hiveos and mined at suprnova before the fork and worked fine, now I changed to new ewbf version, algo 144_5 and new port 8866 but I only get rejected shares, can anyone help me?  Huh

    Are you sure you added required parameter --pers BgoldPoW?
    Yes I am sure.

  • gsanjin
    Member
    **
    Offline Offline

    Activity: 191
    Merit: 12


    View Profile
    July 06, 2018, 09:43:38 AM
     #389
    Quote from: AlexBeard on July 06, 2018, 09:23:03 AM
    Quote from: gsanjin on July 06, 2018, 09:13:34 AM
    Quote from: AlexBeard on July 06, 2018, 09:06:10 AM
    I am trying to mine btg at suprnova and only get rejected shares, I use hiveos and mined at suprnova before the fork and worked fine, now I changed to new ewbf version, algo 144_5 and new port 8866 but I only get rejected shares, can anyone help me?  Huh

    Are you sure you added required parameter --pers BgoldPoW?
    Yes I am sure.

    Just tried mining with this and it works fine for me (v0.3 of miner)
    Quote
    miner --algo 144_5 --pers BgoldPoW --server btg.suprnova.cc --user username.worker --pass 1 --port 8866

  • AlexBeard
    Newbie
    *
    Offline Offline

    Activity: 12
    Merit: 0


    View Profile
    July 06, 2018, 09:57:39 AM
     #390
    Quote from: gsanjin on July 06, 2018, 09:43:38 AM
    Quote from: AlexBeard on July 06, 2018, 09:23:03 AM
    Quote from: gsanjin on July 06, 2018, 09:13:34 AM
    Quote from: AlexBeard on July 06, 2018, 09:06:10 AM
    I am trying to mine btg at suprnova and only get rejected shares, I use hiveos and mined at suprnova before the fork and worked fine, now I changed to new ewbf version, algo 144_5 and new port 8866 but I only get rejected shares, can anyone help me?  Huh

    Are you sure you added required parameter --pers BgoldPoW?
    Yes I am sure.

    Just tried mining with this and it works fine for me (v0.3 of miner)
    Quote
    miner --algo 144_5 --pers BgoldPoW --server btg.suprnova.cc --user username.worker --pass 1 --port 8866
    Thanks for your help, I feel stupid now I was typing bad --pers BgoldPow not --pers BgoldPoW  Angry

  • ripcurrent
    Member
    **
    Offline Offline

    Activity: 160
    Merit: 10


    View Profile
    July 06, 2018, 01:10:30 PM
     #391
    I keep getting this error any ideas?

    : "unspecified launch failure"
    09:09:08 CUDA: Device: 0 Thread exited with message: "unspecified launch failure"
    09:09:08 CUDA: Device: 1 Thread exited with message: "unspecified launch failure"
    09:09:08 CUDA: Device: 3 Thread exited with message: "unspecified launch failure"
    09:09:08 CUDA: Device: 4 Thread exited with message: "all CUDA-capable devices are busy or unavailable"
    09:09:08 CUDA: Device: 5 Thread exited with message: "all CUDA-capable devices are busy or unavailable"

  • akrazojub
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    July 06, 2018, 01:15:49 PM
     #392
    Running EWBF 3 144_5 for BTG and slowly ramping up my 6 MSI 1080 ti Gaming X in values. Currently at +50 CORE +450 @ 68% Power and getting about 50-53 sols per card.

    I have never been able to get my MSI's to do much more than +75 CORE +500 MEM at 68% without losing stability and having a card crash. (I have mined BTG, ZEN, and RVN with EWBF, CCMINER, DTSM)

    Anyone else have experience with these cards? Is my experience typical or am I doing it wrong?

  • farfui
    Newbie
    *
    Offline Offline

    Activity: 26
    Merit: 0


    View Profile
    July 06, 2018, 03:11:03 PM
     #393
    for btg ram + 100 - 150 and more core clock

  • hogwash.89m
    Newbie
    *
    Offline Offline

    Activity: 32
    Merit: 0


    View Profile
    July 06, 2018, 10:34:42 PM
     #394
    Quote from: akrazojub on July 06, 2018, 01:15:49 PM
    Running EWBF 3 144_5 for BTG and slowly ramping up my 6 MSI 1080 ti Gaming X in values. Currently at +50 CORE +450 @ 68% Power and getting about 50-53 sols per card.

    I have never been able to get my MSI's to do much more than +75 CORE +500 MEM at 68% without losing stability and having a card crash. (I have mined BTG, ZEN, and RVN with EWBF, CCMINER, DTSM)

    Anyone else have experience with these cards? Is my experience typical or am I doing it wrong?

    I got one MSI 1080 ti Gaming (w/o X), basically yours have higher clocks out of box, so you probably can't achieve higher clocks than that, ofc. if you have plenty of spare PSU power (20%+), voltages are stable and rest of rig is stable.

    Mine I got clocked on +170 CORE + 540 MEM and PL ~75% (+5/-5) rock stable with bunch of 1080 in rig.
    Also it depends on algo, chip sample luck etc.
    Like Lyra2z is mainly using  just core, so clocks is doing maximum boost (2000+ Mhz) and then I'm find that +150 CORE is stable.

  • MrPlus
    Member
    **
    Offline Offline

    Activity: 514
    Merit: 11


    View Profile WWW
    July 07, 2018, 03:52:02 PM
     #395
    NPlusMiner added support of equihash192 in 4.0.1 using EWBF 0.3

    4.0 users will receive it through AutoUpdate.
    AutoUpdate will not activate the algo by default. Add it in config if you want to mine it.

    https://github.com/MrPlusGH/NPlusMiner/releases
    +++++++++++++++++++++++++++++
    NPlusMiner - MultiRig remote management|AI|Autoupdate|Pool/Algo switching

  • CarlOrff
    Sr. Member
    ****
    Offline Offline

    Activity: 826
    Merit: 440



    View Profile
    July 07, 2018, 10:16:55 PM
     #396
    Quote from: akrazojub on July 06, 2018, 01:15:49 PM
    Running EWBF 3 144_5 for BTG and slowly ramping up my 6 MSI 1080 ti Gaming X in values. Currently at +50 CORE +450 @ 68% Power and getting about 50-53 sols per card.

    I have never been able to get my MSI's to do much more than +75 CORE +500 MEM at 68% without losing stability and having a card crash. (I have mined BTG, ZEN, and RVN with EWBF, CCMINER, DTSM)

    Anyone else have experience with these cards? Is my experience typical or am I doing it wrong?
    With MSI 1080Ti, I am at +175 core and +350 mem @170 W in the smi (135 W real) : stable during weeks (but not 178 at core, unstable).
    Ubuntu use, of course.
    Bitcoin + privacy respect = BitcoinZ (topic BitcoinZ)
    The only decentralized crypto that complements Bitcoin on privacy.
    You missed Bitcoin in 2009 ? Do not miss BitcoinZ in 2018 !

  • 74hawksfan
    Newbie
    *
    Offline Offline

    Activity: 21
    Merit: 0


    View Profile
    July 08, 2018, 01:48:04 AM
     #397
    It doesn't seem that EWBF matches either Device Manager, MSI AB, or GPUz, is there a way to determine what card is what?
    Been trying to overclock/undervolt but I can't seem to figure out which card errors out so I'm just shooting in the dark :-)

  • ComputerGenie
    Hero Member
    *****
    Offline Offline

    Activity: 1092
    Merit: 552


    Retired IRCX God


    View Profile
    July 08, 2018, 03:11:36 AM
     #398
    Quote from: 74hawksfan on July 08, 2018, 01:48:04 AM
    It doesn't seem that EWBF matches either Device Manager, MSI AB, or GPUz, is there a way to determine what card is what?
    Been trying to overclock/undervolt but I can't seem to figure out which card errors out so I'm just shooting in the dark :-)
    Did they take the fan settings out of Afterburner?  Roll Eyes
    If you have to ask "why?", you wouldn`t understand my answer.
    Always be on the look out, because you never know when you'll be stalked by hit-men that eat nothing but cream cheese....

  • 74hawksfan
    Newbie
    *
    Offline Offline

    Activity: 21
    Merit: 0


    View Profile
    July 08, 2018, 04:23:44 AM
     #399
    If you mean did I try to differentiate the cards via fan setting then yes, but I have several water cooled cards that the MSI settings won't change the fan on :-(

    Thank you for the suggestion though!

  • sergioccolb3
    Newbie
    *
    Offline Offline

    Activity: 11
    Merit: 0


    View Profile
    July 08, 2018, 07:46:07 AM
     #400
    Hello. I have 8 videocards Nvidia Tesla V100. But can´t mine BTG. %100 shares rejected. With Zcash working perfect. I have SO Centos 7. Please check and sorry for me basic english.
    Thanks.
    Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [20] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 »
      Print  
Page 19
Viewing Page: 20

IRLBTC™ © 2025 IRLBTC.com