<<  >> (p.34)
    Author Topic: [ANN] TeamRedMiner - Old Thread  (Read 85807 times)

    • Elder III
    Sr. Member
    ****
    Offline Offline

    Activity: 1246
    Merit: 274


    View Profile
    July 21, 2019, 08:21:55 PM
     #661
    ~4.55 on MTP with a Radeon VII; which is very nice but it's using close to 250 watts at 1.0 volts whereas mining XMR uses about 170 watts at the same settings.  I haven't tried any other tweaks yet to see if the power can be lowered while maintaining hashrate.

  • kerney666
    Member
    **
    Offline Offline

    Activity: 658
    Merit: 86


    View Profile
    July 21, 2019, 09:09:11 PM
     #662
    Quote from: Elder III on July 21, 2019, 08:21:55 PM
    ~4.55 on MTP with a Radeon VII; which is very nice but it's using close to 250 watts at 1.0 volts whereas mining XMR uses about 170 watts at the same settings.  I haven't tried any other tweaks yet to see if the power can be lowered while maintaining hashrate.

    Unfortunately, the algo is what it is, we've done what we can with this bad boy. As a comparison, a 1080ti pulls > 220W to hit 4.2-4.3 MH/s.  

    I'm quite certain you can hit a better efficiency on the VII using a lower core clk, but you'll lose hashrate. Mem isn't very important, pull it down as much as you can, or until you see the hashrate taking a hit. I should really take one of my own VIIs for a tuning trip and see where I end up.

  • sharmanov
    Newbie
    *
    Offline Offline

    Activity: 54
    Merit: 0


    View Profile
    July 22, 2019, 11:18:23 PM
     #663
    Does TRM support CN-GPU Algo?

  • 250xmining
    Newbie
    *
    Offline Offline

    Activity: 1
    Merit: 0


    View Profile
    July 23, 2019, 08:22:21 PM
     #664
    Hello,

    It would be awesome if TRM could add support for CN_Conceal!!

    250xMining

  • Dvijuha
    Jr. Member
    *
    Offline Offline

    Activity: 106
    Merit: 1


    View Profile
    July 24, 2019, 09:36:45 AM
     #665
    Hello guys! my hashrate on vega 64 LC is down to 1500 on new ver. of miner. in old ver. i have 2200 hashes. What i need to do to up my hashrate? (i dont want to change timings video card firmware because want to save warranty). Why hashrate in new version is down?

  • kerney666
    Member
    **
    Offline Offline

    Activity: 658
    Merit: 86


    View Profile
    July 24, 2019, 11:35:01 AM
     #666
    Quote from: Dvijuha on July 24, 2019, 09:36:45 AM
    Hello guys! my hashrate on vega 64 LC is down to 1500 on new ver. of miner. in old ver. i have 2200 hashes. What i need to do to up my hashrate? (i dont want to change timings video card firmware because want to save warranty). Why hashrate in new version is down?

    Can you be more specific about which versions you mean with “new” and “old” versions of the miner? Also, please specify operating system and driver version.

    In short, nothing has changed lately for CN variants, and I haven’t heard of any issues except for one guy that got increased hashrates with 0.5.6 (also shouldn’t happen  Cheesy). So, not sure what’s going on really. I have two Vega 64 LCs, run one under win, the other under Linux. I haven’t noticed any issues with CN/r hashrates myself.

  • Miner Addict
    Newbie
    *
    Offline Offline

    Activity: 31
    Merit: 0


    View Profile
    July 24, 2019, 01:42:44 PM
     #667
    Hi Devs,

    Have you test Polaris and Vega at Progpow ??

    Because U are the Expert on AMD Card

  • Dvijuha
    Jr. Member
    *
    Offline Offline

    Activity: 106
    Merit: 1


    View Profile
    July 25, 2019, 10:30:17 AM
     #668
    Quote from: kerney666 on July 24, 2019, 11:35:01 AM
    Quote from: Dvijuha on July 24, 2019, 09:36:45 AM
    Hello guys! my hashrate on vega 64 LC is down to 1500 on new ver. of miner. in old ver. i have 2200 hashes. What i need to do to up my hashrate? (i dont want to change timings video card firmware because want to save warranty). Why hashrate in new version is down?

    Can you be more specific about which versions you mean with “new” and “old” versions of the miner? Also, please specify operating system and driver version.

    In short, nothing has changed lately for CN variants, and I haven’t heard of any issues except for one guy that got increased hashrates with 0.5.6 (also shouldn’t happen  Cheesy). So, not sure what’s going on really. I have two Vega 64 LCs, run one under win, the other under Linux. I haven’t noticed any issues with CN/r hashrates myself.
    sorry in 0.5.6 problem is off. in 0.5.5 or 0.5.4 or 0.5.3 i see this problem.. Yesterday delete bad version with 1500 hashes because update to newest and all became good. Thank you for your good job!

  • SigiSinatra
    Newbie
    *
    Offline Offline

    Activity: 49
    Merit: 0


    View Profile
    July 25, 2019, 06:59:30 PM
     #669
    Quote from: kerney666 on July 21, 2019, 11:08:29 AM
    Quote from: nordmann666 on July 21, 2019, 06:58:10 AM
    Grin29 (Cuckarood29) would be awesome cause my little GTX1060 make 3,2sol and vega "only" 3,7sol (nbminer vs lolminer)

    i´m sure you can tweak Vega over 4sol


    Should we release c29d (pretty good chance we'll do so), I can personally guarantee you it will be > 4 g/s for any Vega at conservative clocks or I'll both eat my shorts and give you a free version.

    I'm getting 4.4~4.7 per vega on C29 which is basically nothing comparing to 1,2 on C31.
    You need to achieve at least 7.5~8 on C29 to be equal to current 1,2 g/s which vegas provide on C31.

  • issie81
    Hero Member
    *****
    Offline Offline

    Activity: 760
    Merit: 500

    CryptoZilla


    View Profile
    July 27, 2019, 06:03:34 AM
     #670
    Quote from: SigiSinatra on July 25, 2019, 06:59:30 PM
    Quote from: kerney666 on July 21, 2019, 11:08:29 AM
    Quote from: nordmann666 on July 21, 2019, 06:58:10 AM
    Grin29 (Cuckarood29) would be awesome cause my little GTX1060 make 3,2sol and vega "only" 3,7sol (nbminer vs lolminer)

    i´m sure you can tweak Vega over 4sol


    Should we release c29d (pretty good chance we'll do so), I can personally guarantee you it will be > 4 g/s for any Vega at conservative clocks or I'll both eat my shorts and give you a free version.

    I'm getting 4.4~4.7 per vega on C29 which is basically nothing comparing to 1,2 on C31.
    You need to achieve at least 7.5~8 on C29 to be equal to current 1,2 g/s which vegas provide on C31.

    How do you get 1.2 on a Vega ( i assume 56/64 and not the latest vii?)

  • soothaa
    Hero Member
    *****
    Offline Offline

    Activity: 1151
    Merit: 528



    View Profile
    August 01, 2019, 02:25:47 PM
     #671
    Is anyone else getting the bug where the "total" hashrate line goes empty? Miner seems to be running..
    Want increased coin support within AwesomeMiner? Try my free plugin to add support for nearly any coin! https://bt.irlbtc.com/view/2979494
    Want Masternode income stats within AwesomeMiner? Try my free plugin to add support for them! https://bt.irlbtc.com/view/3047367

  • kerney666
    Member
    **
    Offline Offline

    Activity: 658
    Merit: 86


    View Profile
    August 01, 2019, 03:40:17 PM
     #672
    Quote from: soothaa on August 01, 2019, 02:25:47 PM
    Is anyone else getting the bug where the "total" hashrate line goes empty? Miner seems to be running..

    Hi soothaa! Never heard of this bug. Is it something with the terminal colors?

  • todxx (OP)
    Member
    **
    Offline Offline

    Activity: 176
    Merit: 76


    View Profile
    August 05, 2019, 09:42:51 PM
     #673
    Team Red Miner v0.5.7 released

    https://github.com/todxx/teamredminer/releases

    Changes in v0.5.7
    • Added CN conceal algo for Conceal (CCX).
    • Added cuckarood29 algo for grin.


    This release brings a couple new algos: CN conceal and cuckarood29!

    Cuckarood29 is quite picky about memory timings.  Tight timings are needed to get good performance on this algo, however this algo is very memory heavy and timings that are stable on other algos may not be stable here.
    For ballpark hashrates, we've seen 580s run between 3.5g/s and 3.8g/s, and Vega64s range between 6g/s and 7.4g/s depending on clocks and timings.

  • Elder III
    Sr. Member
    ****
    Offline Offline

    Activity: 1246
    Merit: 274


    View Profile
    August 05, 2019, 10:53:11 PM
     #674
    Just for reference sake I'm getting about 9.85 hashrate at ~175 watts on a Radeon VII.  Nicely done Team Red.

  • sharmanov
    Newbie
    *
    Offline Offline

    Activity: 54
    Merit: 0


    View Profile
    August 06, 2019, 11:56:15 AM
     #675
    Me too, getting 9.8-10GPS on Radeon VII... Wish C31 would get an uplift for Radeon VII also

  • kokodesu
    Newbie
    *
    Offline Offline

    Activity: 42
    Merit: 0


    View Profile
    August 10, 2019, 04:02:55 AM
     #676
    Using TRMv0.5.7 with algo mtp, d29, c31 causes HW error and crashes.
    This does not occur with TRMv0.5.6.
    The cause is unknown, but I will report it.

    OS HiveOS or mmpOS
    LINUX driver 19.2 or 18.40
    RIG VEGA56x1, RX570x5, RX580x2

  • kerney666
    Member
    **
    Offline Offline

    Activity: 658
    Merit: 86


    View Profile
    August 10, 2019, 08:20:30 AM
     #677
    Quote from: kokodesu on August 10, 2019, 04:02:55 AM
    Using TRMv0.5.7 with algo mtp, d29, c31 causes HW error and crashes.
    This does not occur with TRMv0.5.6.
    The cause is unknown, but I will report it.

    OS HiveOS or mmpOS
    LINUX driver 19.2 or 18.40
    RIG VEGA56x1, RX570x5, RX580x2

    Hi! MTP and c31 didn’t change at all between 0.5.6 and 0.5.7, goes for both gpu and host-side code, so it’s very strange if you see reproducible issues appearing in 0.5.7 for those two Huh. C29d was added in 0.5.7 and can be problematic to tune at times.

    Which gpu(s) are crashing? Always the same or random? Always a Vega or Polaris?

  • iRonNuke
    Jr. Member
    *
    Offline Offline

    Activity: 98
    Merit: 6


    View Profile
    August 10, 2019, 10:46:39 AM
     #678
    I'm having some issues when trying to mine Grin 29/31. Just assigning the GPUs with 8 GB. MTP works fine. If I also exclude the last GPU, it works.

    [2019-08-10 12:42:40] Auto-detected AMD OpenCL platform 0
    [2019-08-10 12:42:50] Initializing GPU 0.
    [2019-08-10 12:42:51] Initializing GPU 1.
    [2019-08-10 12:42:52] Initializing GPU 2.
    [2019-08-10 12:42:53] Initializing GPU 3.
    [2019-08-10 12:42:55] Initializing GPU 4.
    [2019-08-10 12:42:56] Initializing GPU 5.
    [2019-08-10 12:42:57] Initializing GPU 6.
    [2019-08-10 12:42:58] Failed to initialize device idx 10 (-32)
    [2019-08-10 12:43:00] Successful clean shutdown.

  • kerney666
    Member
    **
    Offline Offline

    Activity: 658
    Merit: 86


    View Profile
    August 10, 2019, 11:22:52 AM
     #679
    Quote from: iRonNuke on August 10, 2019, 10:46:39 AM
    I'm having some issues when trying to mine Grin 29/31. Just assigning the GPUs with 8 GB. MTP works fine. If I also exclude the last GPU, it works.

    [2019-08-10 12:42:40] Auto-detected AMD OpenCL platform 0
    [2019-08-10 12:42:50] Initializing GPU 0.
    [2019-08-10 12:42:51] Initializing GPU 1.
    [2019-08-10 12:42:52] Initializing GPU 2.
    [2019-08-10 12:42:53] Initializing GPU 3.
    [2019-08-10 12:42:55] Initializing GPU 4.
    [2019-08-10 12:42:56] Initializing GPU 5.
    [2019-08-10 12:42:57] Initializing GPU 6.
    [2019-08-10 12:42:58] Failed to initialize device idx 10 (-32)
    [2019-08-10 12:43:00] Successful clean shutdown.



    C29/C31 are true memory hogs. They will use > 7GB per gpu, while MTP is "only" using ~4.3GB. The error above indicates that the driver won't let us allocate vram for GPU 6, and I'm guessing it's because there is no host memory address space to use for the mapping.

    How much swap do you have available? Can you make sure it's at least 8GB x NrGPUs?
     

  • iRonNuke
    Jr. Member
    *
    Offline Offline

    Activity: 98
    Merit: 6


    View Profile
    August 10, 2019, 02:15:05 PM
     #680
    Quote from: kerney666 on August 10, 2019, 11:22:52 AM
    Quote from: iRonNuke on August 10, 2019, 10:46:39 AM
    I'm having some issues when trying to mine Grin 29/31. Just assigning the GPUs with 8 GB. MTP works fine. If I also exclude the last GPU, it works.

    [2019-08-10 12:42:40] Auto-detected AMD OpenCL platform 0
    [2019-08-10 12:42:50] Initializing GPU 0.
    [2019-08-10 12:42:51] Initializing GPU 1.
    [2019-08-10 12:42:52] Initializing GPU 2.
    [2019-08-10 12:42:53] Initializing GPU 3.
    [2019-08-10 12:42:55] Initializing GPU 4.
    [2019-08-10 12:42:56] Initializing GPU 5.
    [2019-08-10 12:42:57] Initializing GPU 6.
    [2019-08-10 12:42:58] Failed to initialize device idx 10 (-32)
    [2019-08-10 12:43:00] Successful clean shutdown.



    C29/C31 are true memory hogs. They will use > 7GB per gpu, while MTP is "only" using ~4.3GB. The error above indicates that the driver won't let us allocate vram for GPU 6, and I'm guessing it's because there is no host memory address space to use for the mapping.

    How much swap do you have available? Can you make sure it's at least 8GB x NrGPUs?
     

    Thanks! It was that easy, I had a little too little swap, when I extended it works just fine, thanks! Smiley
    Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 [34] 35 36 37 38 39 40 41 42 »
      Print  
Page 33
Viewing Page: 34

IRLBTC™ © 2025 IRLBTC.com